1. Application Scope
This Rule is applicable to various safety-related glass products for buildings, railway vehicles and automobiles in which the safety glasses for automobiles include those for agricultural vehicles and other road vehicles (hereinafter uniformly referred to as safety glass for automobiles).
Safety-related glass for automobiles includes laminated glass, tempered glass, zone-tempered glass, plastic-glass composite, safety hollow glass, etc.; safety-related glass product for buildings includes laminated glass, tempered glass, (safety) hollow glass, etc.; safety-related glass product for railway vehicles includes front-window laminated glass, laminated glass outside front window, tempered glass and safety hollow glass, etc.
2. Certification Mode
Type test + inspection of enterprise quality assurance capacity and product consistency + post-certification follow-up inspection
3. Basic Requirements for Implementing Certification
The basic procedure for implementing certification includes certification application, type test, initial factory inspection, assessment and approval of certification result, and post-certification follow-up inspection.
3.1 Certification Application
3.1.1 Unit division principle
3.1.1.1 Certification units in principle are divided by the type, thickness, structure, transmittance, sealing mode and material of the certification product. The same products of the same manufacturer but from different processing sites are regarded as different units.
3.1.1.2 Safety-related glass for automobiles
a) Laminated glass for air window
Such glass products are divided into units by the total nominal thickness and interlayer type, i.e. the laminated glasses of the same total nominal thickness and interlayer type are regarded as the same unit. The products within the same unit are expressed one by one by key parameters of applicable vehicle model, i.e. the developed area, minimum curvature radius and maximum arch rise. The products in each unit shall be submitted as per Table 1 given in Attachment 2.
b) Zone-tempered glass for air window
1. Application Scope
2. Certification Mode
3. Basic Requirements for Implementing Certification
3.1 Certification Application
3.2 Product Inspection
3.3 Initial Factory Inspection
3.4 Assessment and Approval of Certification Result
3.5 Post-Certification Supervision and Reinspection
4. Maintenance and Alteration of Authentication Certificate
4.1 Validity Period of Authentication Certificate
4.2 Certificate Alteration
4.3 Deadline for Altering Certificate
4.4 Suspension, Cancellation and Withdrawal of Certificate
5. Application Rules for Certification Mark
5.1 Application of Certification Mark
5.2 Mark Style of Authorization
5.3 Applied Method
6. Charge
Attachment 1: Compulsory Product Certification - Factory Quality Assurance Capability Requirements
Attachment 2: Summary Sheet of Safety-related Glass Types and Specifications/Models
Attachment 3: Sample Quantity and Inspection Items Required for Safety-Related Automobile Glass Inspection
Attachment 4: Sample Quantity and Inspection Items Required for Safety-related Building Glass Inspection
Attachment 5: Sample Quantity and Inspection Items Required for Safety-related Glass for Railway Vehicle Inspection
Attachment 6: Requirements of Validation Inspection Items and Minimum Frequency
Standard
CNCA-04C-028:2009 Implentation rules for compulsory certification of safety glazing materials (English Version)
Standard No.
CNCA-04C-028:2009
Status
valid
Language
English
File Format
PDF
Word Count
10000 words
Price(USD)
200.0
Implemented on
2010-1-1
Delivery
via email in 1 business day
Detail of CNCA-04C-028:2009
Standard No.
CNCA-04C-028:2009
English Name
Implentation rules for compulsory certification of safety glazing materials
Chinese Name
安全玻璃类强制性认证实施规则
Chinese Classification
Professional Classification
CN
ICS Classification
Issued by
China Certification Supervision Committee
Issued on
2009-12-15
Implemented on
2010-1-1
Status
valid
Superseded by
Superseded on
Abolished on
Superseding
Language
English
File Format
PDF
Word Count
10000 words
Price(USD)
200.0
Keywords
CNCA-04C-028:2009, , CNCA-04C-028:2009, CNCA,
Introduction of CNCA-04C-028:2009
1. Application Scope
This Rule is applicable to various safety-related glass products for buildings, railway vehicles and automobiles in which the safety glasses for automobiles include those for agricultural vehicles and other road vehicles (hereinafter uniformly referred to as safety glass for automobiles).
Safety-related glass for automobiles includes laminated glass, tempered glass, zone-tempered glass, plastic-glass composite, safety hollow glass, etc.; safety-related glass product for buildings includes laminated glass, tempered glass, (safety) hollow glass, etc.; safety-related glass product for railway vehicles includes front-window laminated glass, laminated glass outside front window, tempered glass and safety hollow glass, etc.
2. Certification Mode
Type test + inspection of enterprise quality assurance capacity and product consistency + post-certification follow-up inspection
3. Basic Requirements for Implementing Certification
The basic procedure for implementing certification includes certification application, type test, initial factory inspection, assessment and approval of certification result, and post-certification follow-up inspection.
3.1 Certification Application
3.1.1 Unit division principle
3.1.1.1 Certification units in principle are divided by the type, thickness, structure, transmittance, sealing mode and material of the certification product. The same products of the same manufacturer but from different processing sites are regarded as different units.
3.1.1.2 Safety-related glass for automobiles
a) Laminated glass for air window
Such glass products are divided into units by the total nominal thickness and interlayer type, i.e. the laminated glasses of the same total nominal thickness and interlayer type are regarded as the same unit. The products within the same unit are expressed one by one by key parameters of applicable vehicle model, i.e. the developed area, minimum curvature radius and maximum arch rise. The products in each unit shall be submitted as per Table 1 given in Attachment 2.
b) Zone-tempered glass for air window
Contents of CNCA-04C-028:2009
1. Application Scope
2. Certification Mode
3. Basic Requirements for Implementing Certification
3.1 Certification Application
3.2 Product Inspection
3.3 Initial Factory Inspection
3.4 Assessment and Approval of Certification Result
3.5 Post-Certification Supervision and Reinspection
4. Maintenance and Alteration of Authentication Certificate
4.1 Validity Period of Authentication Certificate
4.2 Certificate Alteration
4.3 Deadline for Altering Certificate
4.4 Suspension, Cancellation and Withdrawal of Certificate
5. Application Rules for Certification Mark
5.1 Application of Certification Mark
5.2 Mark Style of Authorization
5.3 Applied Method
6. Charge
Attachment 1: Compulsory Product Certification - Factory Quality Assurance Capability Requirements
Attachment 2: Summary Sheet of Safety-related Glass Types and Specifications/Models
Attachment 3: Sample Quantity and Inspection Items Required for Safety-Related Automobile Glass Inspection
Attachment 4: Sample Quantity and Inspection Items Required for Safety-related Building Glass Inspection
Attachment 5: Sample Quantity and Inspection Items Required for Safety-related Glass for Railway Vehicle Inspection
Attachment 6: Requirements of Validation Inspection Items and Minimum Frequency