Certification and Accreditation Administration of the People's Republic of China
Issued on:
2014-07-16
Implemented on:
2014-9-1
Status:
valid
Language:
English
File Format:
PDF
Word Count:
4000 words
Price(USD):
80.0
Delivery:
via email in 1 business day
1 Scope of Application
This Rule is applicable to audio and video equipment, including active sound box of single and multiple speaker with gross output power below 500W (rms); audio power amplifier; tuned receiver and radio with different broadcast bands; audio and video recording, play and process equipment with different carriers (including optical disks, magnetic tapes, hard drives); combination of four equipment above; power adapter associated with audio and video equipment (including charger/discharger); color receiver with different imaging modes; monitor; kinescope (display tube); video recorder; electronic organ; antennafier.
The adjustment of application scope caused by the changes of laws, regulations, relevant products standards, technologies, and industrial policies, shall be subject to the announcement issued by CNCA.
2 Certification Standards
... ...
... ...
The above standards shall be the latest edition issued by the national standardized administrative department in principle. Where other editions are needed, the announcement applicable to the requirements of relevant standards and issued by CNCA shall be observed.
3 Certification Mode
Basic certification mode for compulsory certification of audio and video equipment is as follows:
For Type I or Type II equipment:
Type test + supervision after certification;
The supervision after certification above refers to one of the three modes, i.e. follow-up inspection after certification, sampling testing or inspection on production site and market sampling testing/inspection.
For equipment other than Type I or Type II:
Type test + follow-up supervision after certification;
According to the requirements of Implementation Rule on Compulsory Product Certification - Classified Management of Manufacturer, Certification Mode Selection and Confirmation, certification body implements classified management and increase enterprise quality assurance capacity and product consistency inspection (initial factory inspection) on the basis of basic certification mode in conjunction with classified management result and combines supervision manner after certification to determine certification mode applicable to the certification client.
CNCA-C08-01:2014 Implementation Rule on Compulsory Product Certification Audio and Video Equipment English
0 Introduction
1 Scope of Application
2 Certification Standards
3 Certification Mode
4 Certification Unit Division
5 Certification Entrustment
5.1 Proposal and Acceptance of Certification Entrustment
5.2 Application Information
5.3 Implementation Arrangement
6 Certification Implementation
6.1 Type Test
6.2 Certification Evaluation and Decision
6.3 Certification Time Limit
7 Supervision after Certification.
7.1 Follow-up Inspection after Certification
7.2 Sampling Testing or Inspection on Production Site
7.3 Market Sampling Testing/Inspection
7.4 Frequency and time of Supervision after Certification.
7.5 Record of Supervision after Certification.
7.6 Result Evaluation of Supervision after Certification.
8 Certificate
8.1 Maintaining
8.2 Alteration of Certificated Products
8.3 Expansion of Certificed Product
8.4 Cancellation, Suspension and Revocation of Certificate
8.5 Application
9 Certification Mark
9.1 Allowable Mark Pattern
9.2 Marking Mode
10 Charging
11 Certification Responsibility
Standard
CNCA-C08-01:2014 Implementation Rule on Compulsory Product Certification Audio and Video Equipment (English Version)
Standard No.
CNCA-C08-01:2014
Status
valid
Language
English
File Format
PDF
Word Count
4000 words
Price(USD)
80.0
Implemented on
2014-9-1
Delivery
via email in 1 business day
Detail of CNCA-C08-01:2014
Standard No.
CNCA-C08-01:2014
English Name
Implementation Rule on Compulsory Product Certification Audio and Video Equipment
Chinese Name
强制性产品认证实施规则 音视频设备
Chinese Classification
Professional Classification
CN
ICS Classification
Issued by
Certification and Accreditation Administration of the People's Republic of China
Issued on
2014-07-16
Implemented on
2014-9-1
Status
valid
Superseded by
Superseded on
Abolished on
Superseding
Language
English
File Format
PDF
Word Count
4000 words
Price(USD)
80.0
Keywords
CNCA-C08-01:2014, , CNCA-C08-01:2014, CNCA,
Introduction of CNCA-C08-01:2014
1 Scope of Application
This Rule is applicable to audio and video equipment, including active sound box of single and multiple speaker with gross output power below 500W (rms); audio power amplifier; tuned receiver and radio with different broadcast bands; audio and video recording, play and process equipment with different carriers (including optical disks, magnetic tapes, hard drives); combination of four equipment above; power adapter associated with audio and video equipment (including charger/discharger); color receiver with different imaging modes; monitor; kinescope (display tube); video recorder; electronic organ; antennafier.
The adjustment of application scope caused by the changes of laws, regulations, relevant products standards, technologies, and industrial policies, shall be subject to the announcement issued by CNCA.
2 Certification Standards
... ...
... ...
The above standards shall be the latest edition issued by the national standardized administrative department in principle. Where other editions are needed, the announcement applicable to the requirements of relevant standards and issued by CNCA shall be observed.
3 Certification Mode
Basic certification mode for compulsory certification of audio and video equipment is as follows:
For Type I or Type II equipment:
Type test + supervision after certification;
The supervision after certification above refers to one of the three modes, i.e. follow-up inspection after certification, sampling testing or inspection on production site and market sampling testing/inspection.
For equipment other than Type I or Type II:
Type test + follow-up supervision after certification;
According to the requirements of Implementation Rule on Compulsory Product Certification - Classified Management of Manufacturer, Certification Mode Selection and Confirmation, certification body implements classified management and increase enterprise quality assurance capacity and product consistency inspection (initial factory inspection) on the basis of basic certification mode in conjunction with classified management result and combines supervision manner after certification to determine certification mode applicable to the certification client.
Contents of CNCA-C08-01:2014
CNCA-C08-01:2014 Implementation Rule on Compulsory Product Certification Audio and Video Equipment English
0 Introduction
1 Scope of Application
2 Certification Standards
3 Certification Mode
4 Certification Unit Division
5 Certification Entrustment
5.1 Proposal and Acceptance of Certification Entrustment
5.2 Application Information
5.3 Implementation Arrangement
6 Certification Implementation
6.1 Type Test
6.2 Certification Evaluation and Decision
6.3 Certification Time Limit
7 Supervision after Certification.
7.1 Follow-up Inspection after Certification
7.2 Sampling Testing or Inspection on Production Site
7.3 Market Sampling Testing/Inspection
7.4 Frequency and time of Supervision after Certification.
7.5 Record of Supervision after Certification.
7.6 Result Evaluation of Supervision after Certification.
8 Certificate
8.1 Maintaining
8.2 Alteration of Certificated Products
8.3 Expansion of Certificed Product
8.4 Cancellation, Suspension and Revocation of Certificate
8.5 Application
9 Certification Mark
9.1 Allowable Mark Pattern
9.2 Marking Mode
10 Charging
11 Certification Responsibility