0. Introduction
Implementation Regulations for Compulsory Certification of Automobile Seats and Seat Head Restraints (hereinafter referred to as the Regulations) are prepared according to the requirements of “Implementation Rules for Compulsory Certification - Automobile Seats and Seat Head Restraints” (CNCA-C11-12: 2014) (hereinafter referred to as the Rules) as an auxiliary document and are jointly used with the Rules.
The applicable product range and certification basis of the Regulations are consistent with those in the Rules and adjusted according to the announcement on contents definition and adjustment issued by the Certification and Accreditation Administration of the People's Republic of China (hereinafter referred to as CNCA).
The Regulations are prepared and published on the principles of maintaining effectiveness of product certification, improving product quality, serving certification enterprises and controlling certification risk. The implementation requirements of compulsory product certification of automobile seats and seat head restraints are defined in the Regulations through establishing requirements for classification management of manufacturer in combination with manufacturer classification.
0.1 Terms and Definitions
0.1.1 Testing at manufacturer's premises (hereinafter referred to as TMP method)
The engineer from the designated laboratory conducts testing with the testing equipment that belongs to the factory laboratory, assisted by the testing personnel dispatched by the factory. Relevant designated laboratory shall be responsible for approval and issuance of testing report.
0.1.2 Witnessed manufacturer's testing (hereinafter referred to as WMT method)
The engineer from designated laboratory witnesses all the testings completed under the plant laboratory testing conditions and with the equipment of the plant laboratory or witnesses partial testing conditions and items in allusion to the testing plan submitted by the plant. The testing personnel of plant laboratory is responsible for issuing original record and draft, in conjunction of the witness engineer from designated laboratory, the testing report according to the format required. Relevant designated laboratory shall be responsible for approval and issuance of testing report.
0.2 Classification Management Requirements of Manufacturer
CQC collects and arranges various kinds of information related to the certification product and the manufacturer's quality, and conducts dynamic classification management for the manufacturer. Certification client, producer and manufacturer shall coordinate with CQC.
CQC classifies manufacturers into four categories, i.e. Category A, Category B, Category C and Category D.
The quality information on which manufacturer classification are based on contain at least the following aspects:
(1) Factory inspection result (including initial factory inspection and post-certification follow-up inspection);
Foreword I
0. Introduction 1
0.1 Terms and Definitions 1
0.2 Classification Management Requirements of Manufacturer 2
0.3 Utilization Requirements of the Manufacturer's Testing Resources 4
1. Application Scope 4
2. Certification Standards 5
3. Certification Mode 5
3.1 Basic Mode of Certification 5
3.2 Applicability of Certification Mode 5
4. Certification Unit Division 6
5. Certification Entrustment 6
5.1 Proposal and Acceptance of Certification Application 6
5.2 Application Data 7
5.3 Implementation Arrangement 7
6. Certification Implementation 8
6.1 Type Test 8
6.2 Initial Factory Inspection 10
6.3 Certification Assessment and Decision 12
6.4 Time Limit for Certification 12
6.5 Maintenance Parts of Vehicle Off-production Type 12
7. Post-certification Supervision 12
7.1 Post-certification Follow-up Inspection 13
7.2 Production Site Sampling Testing or Inspection 13
7.3 Market Sampling Testing/Inspection 14
7.4 Frequency and Duration of Post-certification Supervision 14
7.5 Record of Post-certification Supervision 15
7.6 Assessment on Post-certification Supervision Result 15
8. Certificate 15
8.1 Certificate Maintenance 15
8.2 Certificate Contents 15
8.3 Certificate Alteration 15
8.4 Cancellation, Suspension and Revocation of Certificate 17
8.5 Use of Certificate 17
9. Certification Mark 17
9.1 Allowable Pattern of Mark 17
9.2 Use Requirements 17
10. Charge 17
11. Certification Responsibilities 18
12. Requirements for Process and Time Limit Related to Technology Disputes, Complaint and Appeal 18
Annex 1 Requirements of Production Consistency Control Plan 19
Annex 2 Certification Implementation of After-sale Maintenance Spare Parts of Off-production Vehicle Type 21
Standard
CQC-C1112-2014 Implementation Regulations for Compulsory Product Certification-Automobile Seats and Seat Head Restraints (English Version)
Standard No.
CQC-C1112-2014
Status
valid
Language
English
File Format
PDF
Word Count
9,000 words
Price(USD)
220.0
Implemented on
2015-1-1
Delivery
via email in 1 business day
Detail of CQC-C1112-2014
Standard No.
CQC-C1112-2014
English Name
Implementation Regulations for Compulsory Product Certification-Automobile Seats and Seat Head Restraints
Chinese Name
产品认证实施细则-汽车座椅及座椅头枕
Chinese Classification
Professional Classification
CQ
ICS Classification
Issued by
China Quality Certification Center
Issued on
2014-12-31
Implemented on
2015-1-1
Status
valid
Superseded by
Superseded on
Abolished on
Superseding
Language
English
File Format
PDF
Word Count
9,000 words
Price(USD)
220.0
Keywords
CQC-C1112-2014, , CQC-C1112-2014, CQC,
Introduction of CQC-C1112-2014
0. Introduction
Implementation Regulations for Compulsory Certification of Automobile Seats and Seat Head Restraints (hereinafter referred to as the Regulations) are prepared according to the requirements of “Implementation Rules for Compulsory Certification - Automobile Seats and Seat Head Restraints” (CNCA-C11-12: 2014) (hereinafter referred to as the Rules) as an auxiliary document and are jointly used with the Rules.
The applicable product range and certification basis of the Regulations are consistent with those in the Rules and adjusted according to the announcement on contents definition and adjustment issued by the Certification and Accreditation Administration of the People's Republic of China (hereinafter referred to as CNCA).
The Regulations are prepared and published on the principles of maintaining effectiveness of product certification, improving product quality, serving certification enterprises and controlling certification risk. The implementation requirements of compulsory product certification of automobile seats and seat head restraints are defined in the Regulations through establishing requirements for classification management of manufacturer in combination with manufacturer classification.
0.1 Terms and Definitions
0.1.1 Testing at manufacturer's premises (hereinafter referred to as TMP method)
The engineer from the designated laboratory conducts testing with the testing equipment that belongs to the factory laboratory, assisted by the testing personnel dispatched by the factory. Relevant designated laboratory shall be responsible for approval and issuance of testing report.
0.1.2 Witnessed manufacturer's testing (hereinafter referred to as WMT method)
The engineer from designated laboratory witnesses all the testings completed under the plant laboratory testing conditions and with the equipment of the plant laboratory or witnesses partial testing conditions and items in allusion to the testing plan submitted by the plant. The testing personnel of plant laboratory is responsible for issuing original record and draft, in conjunction of the witness engineer from designated laboratory, the testing report according to the format required. Relevant designated laboratory shall be responsible for approval and issuance of testing report.
0.2 Classification Management Requirements of Manufacturer
CQC collects and arranges various kinds of information related to the certification product and the manufacturer's quality, and conducts dynamic classification management for the manufacturer. Certification client, producer and manufacturer shall coordinate with CQC.
CQC classifies manufacturers into four categories, i.e. Category A, Category B, Category C and Category D.
The quality information on which manufacturer classification are based on contain at least the following aspects:
(1) Factory inspection result (including initial factory inspection and post-certification follow-up inspection);
Contents of CQC-C1112-2014
Foreword I
0. Introduction 1
0.1 Terms and Definitions 1
0.2 Classification Management Requirements of Manufacturer 2
0.3 Utilization Requirements of the Manufacturer's Testing Resources 4
1. Application Scope 4
2. Certification Standards 5
3. Certification Mode 5
3.1 Basic Mode of Certification 5
3.2 Applicability of Certification Mode 5
4. Certification Unit Division 6
5. Certification Entrustment 6
5.1 Proposal and Acceptance of Certification Application 6
5.2 Application Data 7
5.3 Implementation Arrangement 7
6. Certification Implementation 8
6.1 Type Test 8
6.2 Initial Factory Inspection 10
6.3 Certification Assessment and Decision 12
6.4 Time Limit for Certification 12
6.5 Maintenance Parts of Vehicle Off-production Type 12
7. Post-certification Supervision 12
7.1 Post-certification Follow-up Inspection 13
7.2 Production Site Sampling Testing or Inspection 13
7.3 Market Sampling Testing/Inspection 14
7.4 Frequency and Duration of Post-certification Supervision 14
7.5 Record of Post-certification Supervision 15
7.6 Assessment on Post-certification Supervision Result 15
8. Certificate 15
8.1 Certificate Maintenance 15
8.2 Certificate Contents 15
8.3 Certificate Alteration 15
8.4 Cancellation, Suspension and Revocation of Certificate 17
8.5 Use of Certificate 17
9. Certification Mark 17
9.1 Allowable Pattern of Mark 17
9.2 Use Requirements 17
10. Charge 17
11. Certification Responsibilities 18
12. Requirements for Process and Time Limit Related to Technology Disputes, Complaint and Appeal 18
Annex 1 Requirements of Production Consistency Control Plan 19
Annex 2 Certification Implementation of After-sale Maintenance Spare Parts of Off-production Vehicle Type 21