Code of China Chinese Classification Professional Classification ICS Classification Latest Value-added Service
LoginRegister
Title Standard No. Implemented On
MJ Thread Tap - Long Nut TapQJ 2738.4-19951995-12-13
Covering Cap Lock - Rotary Fast-speed LockQJ 2709.1-19951996-1-1
MJ Thread Tap - Technical ConditionsQJ 2739-19951995-12-13
General requirements for residual current operated protective devicesGB 6829-19951996-1-1
The chemical oxide coating for iron and steelGB/T 15519-19951996-2-1
Test methods for surface flatness of silicon polished slicesGB/T 6621-19951995-1-2
Inspection methods for basic parameters of environmental testing equipments for electric and electronic products-GeneralGB/T 5170.1-19951996-1-1
Heat Treatment for Magnetically Soft Alloy - Heat Treatment for Corrosion-resistant Magnetically Soft Alloy QJ 1181.5A-19951995-11-26
Classification and Codes of Quality and Reliability Information for Space Product - Classification and Code for Nature of Failure of Space ProductQJ 2731.6-19951995-11-1
Normed Data Acquisition Card and Its Fill-in Specifications of Material Consumption ProcessQJ 2701-19951995-11-1
Preparation and Management of Assignment QJ 1010A-19951995-10-1
Type designation system for surface acoustic wave filtersSJ/T 10641-19951995-10-1
Heat Treatment for Magnetically Soft Alloy - High Saturation Flux Density - Heat Treatment for Magnetically Soft Alloy QJ 1181.2A-19951995-11-26
Solution Analysis Method for Low Tin Bronze CoatingQJ 2736-19951995-10-26
Test method for thermal shock resistance of refractory prodcts(air quenching)YB/T 376.2-19951995-10-1
Bar connectors,Type TJC2,detail specification forSJ/T 10644-19951995-10-1
General Specification for Installation of Aerospace Electrical and Electronic Equipment QJ 165A-19951996-12-1
Determination method for shrinkage in boiling water for import and export polyester textured yarnSN/T 0470-19951995-10-1
0.5mm and 2.5mm Modular Grid for Designing and Arranging PanelQJ 2702-19951995-11-1
Hermetically Sealed Electromagnetic Relay - Specifications for Screening QJ 789A-19951995-11-1
Silicon-aluminium alloyYB/T 065-19951995-10-1
Rules for the inspection of brown fused alumina abrasive materials for exportSN/T 0357-19951995-10-1
Enameled rectangular wires; Part 5: Enameled rectangular copper wires with a temperature index of 220GB/T 7095.5-19951996-1-1
General Specification for Electro-hydraulic Mechanical Feedback Servo ActuatorQJ 2725-19951995-10-26
Graphic Symbol for Microwave DeviceQJ 2733-19951995-12-1
Technical Condition for PCB CAD Light Painting Camera Ready CopyQJ 2707-19951995-10-26
Test method for measuring warp on silicon slices by noncontact scanningGB/T 6620-19951995-1-2
Cast copper alloy integral flangesGB/T 15530.1-19951996-1-1
Rules for the inspection of collet for exportSN/T 0360-19951995-10-1
Test Method for Electrical Performance of Solar Cell QJ 1019A-19951995-11-1
Classification and Codes of Quality and Reliability Information for Space Product - Classification and Code for Failure Cause of Space ProductQJ 2731.8-19951995-11-1
Development Procedure of Ground Guidance Station QJ 1447A-19951995-10-26
Testing method for silk and filament yarn fabricsGB/T 15552-19951995-7-1
Rules for the inspection of lead-acid storage batteries for exportSN/T 0361-19951995-10-1
Information processing-Data interchange on 130mm flexible disk cartridges using modified frequency modulation recording at 13262 ftprad, on 80 tracks on each side-Part 3: Track format B for 80 tracksGB/T 15131.3-19951995-1-2
General Specification for Telemetering Antenna on Ground QJ 2726-19951995-10-26
Loose plate steel flanges with copper alloy plate collar for brazing or weldingGB/T 15530.5-19951996-1-1
Voltage, Current and Frequency Series for Power Converter QJ 829A-19951995-11-1
Aerospace Hydraulic Pollution Control - Coding Method for Pollution Grade of Solid Particle in Working LiquidQJ 2724.1-19951996-10-1
Format and classification of digital audio tape cassette system (DAT) used for broadcastingGB/T 15521-19951995-1-1
Electrotechnical terminology Industrial electro-heat installationGB/T 2900.23-19951996-1-1
EMC specification and test methods for land mobile communication equipmentGB 15540-19951995-12-1
Rules for the inspection of bonded abrasive products for exportSN/T 0356-19951995-10-1
Process Specification for Low Tin Bronze Coating QJ 2735-19951995-10-26
Rule for the inspection of enamel coffee cookens ware for exportSN/T 0365-19951995-10-1
Test method for crystallographic perfection of silicon by preferential etch techniquesGB/T 1554-19951995-12-1
Specification for Carbon Fiber / Phenolic - High Silica Oxygen Fibre / Phenolic Comound Moulded ProductQJ 2727-19951995-12-7
Rules for the inspection of tufted carpets for exportSN/T 0363.2-19951995-10-1
Information processing-Data interchange on 130mm flexible disk cartridges using modified frequency modulation recording at 13262 ftprad, on 80 tracks on each side-Part 2:Track format A for 77 tracksGB/T 15131.2-19951995-1-2
Electrotechnical terminology InsulatorGB/T 2900.8-19951996-1-1
Information processing systems-Open Systems interconnection-Basic Reference Model-Part 3: Naming and addressingGB/T 9387.3-19951995-1-2
Enameled rectangular wires; Part 4: Enameled rectangular copper wires with a temperature index of 180GB/T 7095.4-19951996-1-1
Metallic materials—Resistivity measurement methodGB/T 351-19951995-1-2
Silicon-calcium-barium-aluminium alloyYB/T 067-19951995-10-1
Office machines and printing machines used for information processing--General specification of fabric printing ribbonsGB/T 4313-19951995-12-1
MJ Thread Tap - Long Shank Machine and Hand TapQJ 2738.2-19951995-12-13
Standard for classification of seismic protection of buildingsGB 50223-19951995-11-1
The testing code of dry cooling tower and condenser of thermal power plantDL/T 552-19951995-10-1
Test method for measuring resistivity of silicon wafers using spreading resistance probeGB/T 6617-19951995-1-2
Thermal Treatment of Stainless SteelQJ 2714-19951995-11-26
Testing method for silk and filament yarn fabricsGB/T 15553-19951995-7-1
Electrotechnical terminology Small-power motorGB/T 2900.27-19951996-1-1
Bar connectors,Type TJC,generic specification forSJ/T 10642-19951995-10-1
Sensory analysis-Methodology-Initiation and training of assessors in the detection and recognition of odoursGB/T 15549-19951995-1-2
Reliability requirements and testing methods for non-broadcast video tape recordersGB/T 15524-19951995-1-1
Classification and Codes of Quality and Reliability Information for Space Product - Classification and Code for Degree of Failure of Space ProductQJ 2731.7-19951995-11-1
Test Method for Ultra-low Frequency SignalQJ 2715-19951995-10-26
Test method for measuring resistivity of monocrystal silicon and germanium with a collinear four-probe arrayGB/T 1552-19951995-1-2
Technical Specification for Acceptance of Metallochemistry Milling Product QJ 954A-19951995-11-26
Covering Cap Lock - Spring Lock QJ 2709.3-19951996-1-1
MJ Thread Tap - Short Nut Tap QJ 2738.3-19951995-12-13
Terms used by the clothing industryGB/T 15557-19951995-10-1
Rules for the inspection of roast peking duck for exportSN/T 0368-19951995-10-1
Classification and Codes of Quality and Reliability Information for Space Product - Classification and Code for Fault Corrective Meadure of Space ProductQJ 2731.9-19951995-11-1
Copper-coated steel strips for welded pipeYB/T 069-19951995-10-1
Computer software unit testingGB/T 15532-19951995-1-2
Technical Specification for Quality Acceptance of Metal Before Chemical Milling QJ 953A-19951995-11-26
Enameled rectangular wires; Part 2: Polyvinyl-formal enameled rectangular copper wires with high mechanical propertiesGB/T 7095.2-19951996-1-1
General specification for radio frequency modulators of video tape recordersGB/T 15523-19951995-1-1
Information processing—8-bit single-byte coded graphic character sets—Part 3: Latin alphabet No.3GB/T 15273.3-19951995-1-2
Test method for resistivity of silicon and germanium bars using a two-point probeGB/T 1551-19951995-1-2
Copper alloy welding neck flangesGB/T 15530.2-19951996-1-1
Oil-resisting asbestos-rubber sheetsGB/T 539-19951995-1-2
Mechanical vibration-Balancing vocabularyGB/T 6444-19951996-2-1
Basic parameters and measuring methods of video heads upper cylindersGB/T 8495-19951995-1-1
Technical specifications for trunked mobile radio systemsGB/T 15539-19951995-1-2
Technical conditions of symmetrical cable regenerative trunk equipment operating at 2048kbit/sYD/T 743-19951995-9-1
PCM encoder/decoder system for audio recordingGB/T 15526-19951995-1-1
Terminologies for Nucleus, Microgravity, Static Electricity and Electromagnetic Environment QJ 647A-19951995-10-26
Bar connectors,Type TJC4,detail specification forSJ/T 10646-19951995-10-1
General specification for three-phase synchronous generator driven by reciprocating internal combustion engineGB/T 15548-19951996-1-1
General Specification for Safety Instruction Receiver on BombQJ 2732-19951995-10-26
Technical Condition for Low Tin Bronze CoatingQJ 2734-19951995-11-26
Calcined a-aluminaYS/T 89-19951995-12-1
Loose plate steel flanges with copper alloy welding neck collarGB/T 15530.6-19951996-1-1
Technical specifications for trunked mobile radio systemsGB 15539-19951995-1-2
Presentation and Judging Rules of Aerospace Scientific and Technical ReportQJ 1171A-19951995-11-1
Packing and Marking for silk and filament yarn fabricsGB/T 15554-19951995-7-1
Method for the sampling and preparation of coal water mixture for exportSN/T 0362.1-19951993-5-1
Technical Requirements for Installation Process of Electrostatic Discharge (ESD) Sensitive ApparatusQJ 2711-19951995-10-26
Copper alloy plate flanges for brazing or weldingGB/T 15530.3-19951996-1-1
Information processing-SGML support facilities-Registration procedures for public text owner identifiersGB/T 15537-19951995-1-2
Clad plates-Mechanical and technological testGB/T 6396-19951995-1-2
Rules for the inspection of packaging of dangerous goods for export by air―General specificationsSN/T 0370-19951995-10-1
Heat Treatment for Magnetically Soft Alloy - Heat Treatment for Constant Permeability Alloy QJ 1181.6A-19951995-11-26
Enamelled rectangular wires. Part 7-Polyester enamelled rectangular copper wires, class 130GB/T 7095.7-19951996-1-1
Heat Treatment for Magnetically Soft Alloy - Heat Treatment for Iron and Aluminium Magnetically Soft Alloy QJ 1181.3A-19951995-11-26
General Specification for Telemetering Antenna on Bomb QJ 2720-19951996-10-1
Enameled rectangular wires; Part 3:Polyester enameled rectangular copper wires with a temperature index of 155GB/T 7095.3-19951996-1-1
Heat Treatment for Magnetically Soft Alloy - Heat Treatment for Fe-ni Magnetically Soft Alloy QJ 1181.1A-19951995-11-26
Test method for refractoriness under coad of vefractory products(non-differential with rising temperature)YB/T 370-19951995-10-1
Covering Cap Lock - Rotary LockQJ 2709.2-19951996-1-1
Wrought Aluminium and Aluminium Alloy Tubes― Dimensions and DeviationsGB/T 4436-19951995-12-1
MJ Thread Tap - Short Shank Machine and Hand Screw Tap QJ 2738.1-19951995-12-13
Unalloyed magnesium ingots for remeltingGB/T 3499-19951995-12-1
Lead ingotsGB/T 469-19951995-1-2
Dynamometry for Transonic Wind Tunnel of AerospacecraftQJ 2721-19951996-10-1
Methods of measurement of electrical performance for short wave single-sideband transmittersGB/T 6933-19951995-1-1
Zinc alloy for hot dip galvanizingYS/T 310-19951995-12-1
Software engineering standard taxonomyGB/T 15538-19951995-1-2
General Specification of Ground Based Redar Receiver QJ 2703-19951995-10-26
Technical requirment of digital SPC automatic telephone exchangeGB/T 15542-19951995-1-2
Quality of electric energy supply-Admissible three-phase voltage unbalance factorGB/T 15543-19951996-1-1
Heat Treatment for Magnetically Soft Alloy - Heat Treatment for Magnetic Temperature Compensation Alloy QJ 1181.4A-19951995-11-26
Intensity Data of Regular Screw Thread, Bolt and Screw QJ 300A-19951995-10-1
Technical Requirements and Test Method for Large-capacity Digital Microwave Relay Communication System at 6GHz140Mbit/sYD/T 745-19951995-11-1
Classification and Codes of Quality and Reliability Information for Space Product - Classification and Code for Defect and Fault Mode of Space ProductQJ 2731.5-19951995-11-1
Rules for the inspection of multi-function machine tool for exportSN/T 0358-19951995-10-1
Enameled rectangular wires; Part 1: GeneralGB/T 7095.1-19951996-1-1
Vacuum flangesGB/T 6070-19951996-1-1
Time base stability of non-broadcast video tape recordersGB/T 15525-19951995-1-1
Performance and test methods of the fourth order digital multiplex equimpent operating at 139264 kbit/s and using positive justificationGB/T 11324-19951995-1-2
Information processing-Specificatoin of single-hit decision tablesGB/T 15535-19951995-1-2
Specifications for copper alloy and composite flangesGB/T 15530.8-19951996-1-1
Terms of Infrared Seeker QJ 1279A-19951995-10-26
Enamelled rectangular wires. Part 6-Polyester(imide) overcoated with polyamide-imide enamelled rectangular copper wires, class 200GB/T 7095.6-19951996-1-1
About Us | Contact Us | Payment
Tel: +86-10-8572 5655 | Fax: +86-10-8581 9515 | Email: coc@codeofchina.com | QQ: 672269886
Copyright: Codeofchina Inc. 2008-2020