Title |
Standard No. |
Implemented On |
Double end studs bm=2d | GB 900-1988 | |
Eye bolts | GB/T 798-2021 | 2022-7-1 |
Square head bolts―Product grade C | GB/T 8-2021 | 2022-7-1 |
Cup head square neck bolts with small head and short neck—Product grade B | GB/T 801-2021 | 2022-7-1 |
Strenthened cup head square neck bolts | GB/T 794-2021 | 2022-7-1 |
Countersunk head double nib bolts | GB/T 800-2020 | 2021-6-1 |
Hexagon bolts with wire holes on head | GB/T 32.1-2020 | 2021-6-1 |
Hexagon bolts with wire holes on head—Fine pitch thread | GB/T 32.3-2020 | 2021-6-1 |
Foundation bolts | GB/T 799-2020 | 2021-6-1 |
Hexagon socket head cap screws-Fine pitch thread | GB/T 70.6-2020 | 2020-10-1 |
Hexalobular socket high countersunk head screws | GB/T 2673.2-2020 | 2020-10-1 |
Mechanical properties of fasteners—M42~M72 bolts, screws and studs | GB/T 3098.23-2020 | 2020-10-1 |
Hexalobular socket countersunk flat head screws | GB/T 2673.1-2018 | 2019-7-1 |
Square set screws with cup point | GB/T 84-2018 | 2019-7-1 |
Spring-type straight pins—Slotted—Heavy duty | GB/T 879.1-2018 | 2019-7-1 |
Square set screws with long dog point and rounded end | GB/T 83-2018 | 2019-7-1 |
Spring-type straight pins—Coiled—Standard duty | GB/T 879.4-2018 | 2019-7-1 |
Slotted set screws with cup point | GB/T 74-2018 | 2019-7-1 |
Spring-type straight pins—Coiled—Light duty | GB/T 879.5-2018 | 2019-7-1 |
Slotted set screws with long dog point | GB/T 75-2018 | 2019-7-1 |
Slotted set screws with cone point | GB/T 71-2018 | 2019-7-1 |
Spring-type straight pins-Slotted-Light duty | GB/T 879.2-2018 | 2019-7-1 |
Spring-type straight pins—Coiled—Heavy duty | GB/T 879.3-2018 | 2019-7-1 |
Square set screws with long dog point | GB/T 85-2018 | 2019-7-1 |
Bolt or screw and washer assemblies with plain washers | GB/T 9074.1-2018 | 2019-7-1 |
Square set screws with short dog point and cone end | GB/T 86-2018 | 2019-4-1 |
Fastener―Steel bolts,screws and studs with polyamide locking pre-coating technical specification | GB/T 35478-2017 | 2018-7-1 |
Fastener―Steel bolts,screws and studs with microencapsulated adhesive pre-coating technical specification | GB/T 35480-2017 | 2018-7-1 |
Hexalobular internal driving feature for bolts and screws | GB/T 6188-2017 | 2018-4-1 |
Bolt or screw and washer assemblies with conical spring washers | GB/T 9074.32-2017 | 2018-4-1 |
Terminology of fasteners—Coatings | GB/T 3099.3-2017 | 2018-4-1 |
Fasteners―Non-electrolytically applied zinc flake coatings | GB/T 5267.2-2017 | 2018-4-1 |
Hexalobular bolts with flange | GB/T 35481-2017 | 2018-4-1 |
High-strength structural bolting assemblies for preloading - Part 8: Torshear type bolt with cup head, and nut assemblies | GB/T 32076.8-2017 | 2018-4-1 |
Hexalobular socket head cap screws | GB/T 2671.2-2017 | 2018-2-1 |
Hexalobular socket cheese (short) head screws | GB/T 2671.1-2017 | 2018-2-1 |
Slotted raised countersunk(oval)head tapping screws | GB/T 5284-2017 | 2018-2-1 |
Cross-recessed raised countersunk (oval) head tapping screws | GB/T 847-2017 | 2018-2-1 |
Tapping screw and washer assemblies with plain washers | GB/T 9074.18-2017 | 2018-2-1 |
Slotted set screws with flat point | GB/T 73-2017 | 2018-2-1 |
Slotted countersunk(flat)head tapping screws | GB/T 5283-2017 | 2018-2-1 |
High-strength structural bolting assemblies for preloading. Part 9: Torshear type bolt with hexagon head with large width across flats, and nut assemblies | GB/T 32076.9-2017 | 2018-2-1 |
Cross-recessed countersunk(flat) head tapping screws | GB/T 846-2017 | 2018-2-1 |
Hexalobular socket pan head screws | GB/T 2672-2017 | 2018-2-1 |
Hexalobular socket countersunk head tapping screws | GB/T 2670.2-2017 | 2018-2-1 |
Hexalobular socket pan head tapping screws | GB/T 2670.1-2017 | 2018-2-1 |
Cross-recessed pan head tapping screws | GB/T 845-2017 | 2018-2-1 |
Slotted pan head tapping screws | GB/T 5282-2017 | 2018-2-1 |
Hexagon head tapping screws | GB/T 5285-2017 | 2018-2-1 |
Hexalobular socket raised countersunk head screws | GB/T 2674-2017 | 2018-2-1 |
Hexalobular socket raised countersunk(oval)head tapping screws | GB/T 2670.3-2017 | 2018-2-1 |
Hexagon socket button head screws | GB/T 70.2-2015 | 2017-1-1 |
Fasteners—Bolts, screws, studs and nuts—Symbols and descriptions of dimensions | GB/T 5276-2015 | 2017-1-1 |
Mechanical properties of fasteners—Nuts | GB/T 3098.2-2015 | 2017-1-1 |
Hexagon socket button head screws with collar | GB/T 70.4-2015 | 2017-1-1 |
Hexagon head bolts with fine pitch thread-Full thread | GB/T 5786-2016 | 2016-6-1 |
Countersunk flat head screws with cross recess―Part 2: Property class 8.8, stainless steel screws and non-ferrous metal screws | GB/T 819.2-2016 | 2016-6-1 |
Slotted raised countersunk head screws | GB/T 69-2016 | 2016-6-1 |
Pan head screws with cross recess | GB/T 818-2016 | 2016-6-1 |
Hexagon bolts with flange--Small series | GB/T 16674.1-2016 | 2016-6-1 |
Hexagon washer head tapping screws | GB/T 16824.1-2016 | 2016-6-1 |
High-strength structural bolting assemblies for preloading―Part 2:Suitability for preloading | GB/T 32076.2-2015 | 2016-6-1 |
Slotted cheese head screws | GB/T 65-2016 | 2016-6-1 |
Hexagon flange head tapping screws | GB/T 16824.2-2016 | 2016-6-1 |
Mechanical properties of fasteners-Set screws | GB/T 3098.3-2016 | 2016-6-1 |
Small pan head screws with cross recess | GB/T 823-2016 | 2016-6-1 |
Slotted pan head screws | GB/T 67-2016 | 2016-6-1 |
High strength bolts for joints of space grid structures | GB/T 16939-2016 | 2016-6-1 |
Nut design guide | GB/Z 32564-2016 | 2016-6-1 |
Countersunk flat head screws with cross recess―Part 1: Property class 4.8 | GB/T 819.1-2016 | 2016-6-1 |
High-strength structural bolting assemblies for preloading―Part 1:General requirements | GB/T 32076.1-2015 | 2016-6-1 |
Mechanical properties of fasteners - Tapping screws | GB/T 3098.5-2016 | 2016-6-1 |
Hexagon bolts with flange―Fine pitch thread―Small series | GB/T 16674.2-2016 | 2016-6-1 |
Unthreaded stud for short-cycle drawn arc stud welding | GB/T 10432.2-2016 | 2016-6-1 |
Raised countersunk head screws with cross recess | GB/T 820-2015 | 2016-4-1 |
Fasteners—Countersinks for countersunk head screws | GB/T 152.2-2014 | 2015-3-1 |
Mechanical Properties of fasteners- Stainless steel bolts, screws and studs | GB/T 3098.6-2014 | 2015-3-1 |
Mechanical properties of fasteners. Stainless steel tapping screws | GB/T 3098.21-2014 | 2015-3-1 |
Tolerances for fasteners―Bolt/nut assemblies for service temperatures from -200℃~+700℃ | GB/T 3103.4-2014 | 2015-3-1 |
Cross recessed pan head thread rolling screws | GB/T 6560-2014 | 2015-3-1 |
Fasteners—Countersinks for countersunk head screws | GB/T 152.5-2014 | 2015-3-1 |
Hexagon head thread rolling screws | GB/T 6563-2014 | 2015-3-1 |
Mechanical properties of fasteners―Stainless steel set screws | GB/T 3098.16-2014 | 2015-3-1 |
Cup head square neck bolts | GB/T 12-2013 | 2014-3-1 |
Hexagon fit shank bolts with split pin hole on shank | GB/T 28-2013 | 2014-3-1 |
Square head bolts with small head | GB/T 35-2013 | 2014-3-1 |
Hexagon bolts with slot on head | GB/T 29.1-2013 | 2014-3-1 |
Countersunk head nib bolts | GB/T 11-2013 | 2014-3-1 |
Hexagon bolts with split pin hole on shank | GB/T 31.1-2013 | 2014-3-1 |
Mushroom head square neck bolts | GB/T 14-2013 | 2014-3-1 |
Mushroom head nib bolts | GB/T 15-2013 | 2014-3-1 |
Cup head nib bolts | GB/T 13-2013 | 2014-3-1 |
Countersunk head square neck bolts | GB/T 10-2013 | 2014-3-1 |
Hexagon bolts with cross recess on head | GB/T 29.2-2013 | 2014-3-1 |
Hexagon fit shank bolts | GB/T 27-2013 | 2014-3-1 |
Unthreaded studs for drawn arc stud welding with ceramic ferrule | GB/T 10432.1-2010 | 2011-10-1 |
Unthreaded studs for capacitor discharge welding | GB/T 10432.3-2010 | 2011-10-1 |
Mechanical properties of fasteners—Bolts,screws and studs | GB/T 3098.1-2010 | 2011-10-1 |
Threaded studs for drawn arc stud welding with ceramic ferrule | GB/T 902.2-2010 | 2011-10-1 |
~Mechanical Properties of Fasteners - Parts for Bolted Connections for Use at Temperatures from-200℃~+700℃ | GB/T 3098.8-2010 | 2011-10-1 |
Threaded studs with flange(pitch)and stud with internal thread for short-cycle drawn arc stud welding | GB/T 902.4-2010 | 2011-10-1 |
Specification for wire thread inserts | GB/T 24425.6-2009 | 2010-3-1 |
Prevailing torque type wire thread inserts for blind hole | GB/T 24425.4-2009 | 2010-3-1 |
Passivation of corrosion-resistant stainless-steel fasteners | GB/T 5267.4-2009 | 2010-3-1 |
Internal thread for wire thread inserts | GB/T 24425.5-2009 | 2010-3-1 |
General type wire thread inserts for blind hole | GB/T 24425.2-2009 | 2010-3-1 |
General type wire thread inserts | GB/T 24425.1-2009 | 2010-3-1 |
Mechanical properties of fasteners made of the fine grain non-heat treatment steel—Bolts,screws and studs | GB/T 3098.22-2009 | 2010-3-1 |
Prevailing torque type wire thread inserts | GB/T 24425.3-2009 | 2010-3-1 |
Expansion anchors for use in concrete - Type and dimension | GB/T 22795-2008 | 2010-1-1 |
Mechanical properties of fasteners - Part 21:Tapping screws of stainless-steel | GB/T 3098.21-2008 | 2009-2-1 |
Hexalobular internal driving feature for bolts and screws | GB/T 6188-2008 | 2009-2-1 |
Connections with waisted stud - Nuts extension sleeves | GB/T 13807.3-2008 | 2009-2-1 |
Clevis pin with head | GB/T 882-2008 | 2009-2-1 |
Clevis pins without head | GB/T 880-2008 | 2009-2-1 |
Hexagon socket head cap screws | GB/T 70.1-2008 | 2009-2-1 |
Hexagon socket button head screws | GB/T 70.2-2008 | 2009-2-1 |
Connections with waisted stud - Studs | GB/T 13807.2-2008 | 2009-2-1 |
Slotted pan head screws - Product grade A | GB/T 67-2008 | 2009-2-1 |
Weld studs for manual welding | GB/T 902.1-2008 | 2009-2-1 |
Hexagon socket countersunk head screws | GB/T 70.3-2008 | 2009-2-1 |
Transverse vibration testing method for fasteners | GB/T 10431-2008 | 2009-2-1 |
Fasteners - General requirements for bolts screws studs and nuts | GB/T 16938-2008 | 2009-2-1 |
Gauging of hexagon sockets | GB/T 70.5-2008 | 2009-2-1 |
Connections with waisted stud - Tape classification | GB/T 13807.1-2008 | 2009-2-1 |
Terminology of fasteners - Thread fasteners pin and washer | GB/T 3099.1-2008 | 2009-2-1 |
Sets of torshear type high strength bolt hexagon nut and plain washer for steel structures | GB/T 3632-2008 | 2008-7-1 |
Hexagon socket set screws with dog point | GB/T 79-2007 | 2007-12-1 |
Hexagon lobular socket countersunk head screws | GB/T 2673-2007 | 2007-12-1 |
Slotted headless screws with shank | GB/T 878-2007 | 2007-12-1 |
Hexagon socket set screws with flat point | GB/T 77-2007 | 2007-12-1 |
Hexagon socket set screws with cup point | GB/T 80-2007 | 2007-12-1 |
Hexagon socket set screws with cone point | GB/T 78-2007 | 2007-12-1 |
High Strength Bolts with Large Hexagon Head for Steel Structures | GB/T 1228-2006 | 2006-11-1 |
Square set screws with cup point | GB/T 84-1988 | 2006-2-1 |
Square set screws with short dog point and cone end | GB/T 86-1988 | 2005-10-1 |
Cross recessed hexagon head tapping screw with indentation and washer assemblies with plain washers | GB/T 9074.20-2004 | 2004-8-1 |
Hexalobular socket raised countersunk head screws | GB/T 2674-2004 | 2004-8-1 |
Hexalobular socket raised countersunk (oval) head tapping screws | GB/T 2670.3-2004 | 2004-8-1 |
Hexalobular socket pan head tapping screws | GB/T 2670.1-2004 | 2004-8-1 |
Hexalobular socket cheese (short) head screws | GB/T 2671.1-2004 | 2004-8-1 |
Hexalobular socket head cap screws | GB/T 2671.2-2004 | 2004-8-1 |
Hexalobular socket countersunk head tapping screws | GB/T 2670.2-2004 | 2004-8-1 |
Hexalobular socket pan head screws | GB/T 2672-2004 | 2004-8-1 |
Hexagon bolts with flange with metric fine pitch thread - Small series | GB/T 16674.2-2004 | 2004-8-1 |
Hexagon bolts with flange—Small series | GB/T 16674.1-2004 | 2004-8-1 |
Cross recessed pan head drilling screws with tapping screw thread | GB/T 15856.1-2002 | 2003-6-1 |
Mechanical properties of fasteners - Drilling screws with taping screw thread | GB/T 3098.11-2002 | 2003-6-1 |
Cross recessed raised countersunk head drilling screws with tapping screw thread | GB/T 15856.3-2002 | 2003-6-1 |
Tapping screws thread | GB/T 5280-2002 | 2003-6-1 |
Cheese head studs for arc stud welding | GB/T 10433-2002 | 2003-6-1 |
Gerneral purpose bolts and screws-Radii under the head | GB/T 3105-2002 | 2003-6-1 |
Hexagon Flange Head Drilling Screws with Tapping Screw Thread | GB/T 15856.4-2002 | 2003-6-1 |
Tapping screw and washer assemblies with plain washers | GB/T 9074.18-2002 | 2003-6-1 |
Hexagon washer head drilling screws with tapping screw thread | GB/T 15856.5-2002 | 2003-6-1 |
Cross recessed countersunk head drilling screws | GB/T 15856.2-2002 | 2003-6-1 |
Hexagon bolts for high-strength structural bolting with large width across flats(thread lengths according to GB/T 3106)-Product grade C-Property elasses 8.8 and 10.9 | GB/T 18230.1-2000 | 2001-5-1 |
Hexagon bolts for high-strength structural bolting with large width across flats(short thread length)-Product grade C-Property classes 8.8 and 10.9 | GB/T 18230.2-2000 | 2001-5-1 |
Hexagon nuts for structural bolting with large width across flats,style 1-Product grade B-Property class 10 | GB/T 18230.4-2000 | 2001-5-1 |
Mechanical Properties of Fasteners - Bolts, Screws and Studs | GB/T 3098.1-2000 | 2001-2-1 |
Hexagon socket set screws with cone point | GB/T 78-2000 | 2001-2-1 |
Essential oils and aromatic extracts - Determination of residual benzene content | GB/T 3103.1-2002 | 2001-2-1 |
Mechanical properties of fasteners-Thread rolling screws | GB/T 3098.7-2000 | 2001-2-1 |
Hexagon head bolts with fine pitch thread - Full thread | GB/T 5786-2000 | 2001-2-1 |
Countersunk slotted raised head screws (common head style) | GB/T 69-2000 | 2001-2-1 |
Hexagon Socket Head Cap Screw | GB/T 70.1-2000 | 2001-2-1 |
Pan head screws with cross recess | GB/T 818-2000 | 2001-2-1 |
Hexagon Head Bolts | GB/T 5782-2000 | 2001-2-1 |
Countersunk raisde head screws (common head style) with cross recess | GB/T 820-2000 | 2001-2-1 |
Slottde pan head screws | GB/T 67-2000 | 2001-2-1 |
Mechanical properties of fateners - Set screws | GB/T 3098.3-2000 | 2001-2-1 |
Cheese head screws with cross recess | GB/T 822-2000 | 2001-2-1 |
Hexagon head bolts - Full thread - Product grade C | GB/T 5781-2000 | 2001-2-1 |
Fasteners-Surface discontinuities-Bolts,screws and studs for general requirements | GB/T 5779.1-2000 | 2001-2-1 |
Hexagon Head Bolts-Full Thread | GB/T 5783-2000 | 2001-2-1 |
Slotted cheese head screws | GB/T 65-2000 | 2001-2-1 |
Hexagon head bolts with fine pitch thread | GB/T 5785-2000 | 2001-2-1 |
Mechanical properties of fasteners-Set screws made of stainless-steel | GB/T 3098.16-2000 | 2001-2-1 |
Mechanical properties of fasteners - Tapping screws | GB/T 3098.5-2000 | 2001-2-1 |
Hexagon Head Bolts-Product Grade C | GB/T 5780-2000 | 2001-2-1 |
Slotted countersunk flat head screws (common head style) | GB/T 68-2000 | 2001-2-1 |
Hexagon socket countersunk head screws | GB/T 70.3-2000 | 2001-2-1 |
Mechanical properties of corrosion-resistant stainless-steel fasteners-Part 1:Bolts,screws and studs | GB/T 3098.6-2000 | 2001-2-1 |
Countersunk flat head screws (common head style) with cross-Part 1:Steel of property class 4.8 | GB/T 819.1-2000 | 2001-2-1 |
Fasteners - Surface discontinities - Bolts, screws and studs for special requirements | GB/T 5779.3-2000 | 2001-2-1 |
Hexalobular internal driving feature for bolts and screws | GB/T 6188-2000 | 2001-2-1 |
Cup head square neck bolts with small head and short neck-Product grade B | GB/T 801-1998 | 1999-7-1 |
Cross recessed countersunk flat head screws(common head style)-Grade A-Part 2: Steel of property class 8.8,stainless and non-ferrous metals | GB/T 819.2-1997 | 1998-4-1 |
Countersunk flat head screws-Part 2: Penetration depth of cross recesses | GB/T 5279.2-1997 | 1998-4-1 |
High strength bolts for joints of space grid structures | GB/T 16939-1997 | 1998-4-1 |
Mechanical properties of fasteners—Torsional test and minimum torques for bolts and screws with nominal diameters 1mm to 10mm | GB/T 3098.13-1996 | 1997-7-1 |
Hexagon flange bolts--Small series | GB/T 16674-1996 | 1997-7-1 |
Code for Stud and Nut Used for Installation of Broadside Attached Parts | CB 908-1996 | 1997-6-1 |
Hexagon flange head tapping screws | GB/T 16824.2-1997 | 1997-1-2 |
Mechanical properties of fasteners Self-drilling tapping screws | GB/T 3098.11-1995 | 1996-8-1 |
Hexagon flange head self-drilling tapping screws | GB/T 15856.4-1995 | 1996-8-1 |
Cross recessed pan head self-drilling tapping screws | GB/T 15856.1-1995 | 1996-8-1 |
Cross recessed raised countersunk head self-drilling tapping screws | GB/T 15856.3-1995 | 1996-8-1 |
Cross recessed countersunk head self-drilling tapping screws | GB/T 15856.2-1995 | 1996-8-1 |
Technical requirement for sets of torshear type high strength bolt hexagon nut and plain washer for steel structures | GB/T 3633-1995 | 1996-8-1 |
Type and dimension for sets of torshear type high strength bolt hexagon nut and plain washer for steel structures | GB/T 3632-1995 | 1996-8-1 |
Threaded rods | GB/T 15389-1994 | 1995-10-1 |
Strengthened cap head square neck bolts | GB/T 794-1993 | 1993-12-1 |
Textile glass-Rovings-Determination of compressive strength of rod composites | GB/T 14209-1993 | 1993-10-1 |
Mechanical properties of fasteners―Components for blted connections made mainly from materials with a high temperature strength | GB/T 3098.8-1992 | 1993-6-1 |
for fine mechanics - Cross recessed screws | GB/T 13806.1-1992 | 1993-6-1 |
for fine mechanics cross recessed tapping screws - Scrape point | GB/T 13806.2-1992 | 1993-6-1 |
wall screws | GB/T 14210-1993 | 1993-1-2 |
Slotted Countersunk Head Screws | QJ 2373-1992 | 1992-11-1 |
Slotted Spherical Cheese Head Shoulder Screws | QJ 2382-1992 | 1992-11-1 |
Cup-head Screws | QJ 2386-1992 | 1992-11-1 |
Double End Studs | QJ 2389-1992 | 1992-11-1 |
Technical Specification for Threaded Fastener Made of Brass and Aluminum Alloy - Bolts, Screws and Studs | QJ 2397.1-1992 | 1992-11-1 |
Slotted Cheese Head Positioning Screw | QJ 2379-1992 | 1992-11-1 |
Slotted Spherical Large Cheese Head Screws | QJ 2383-1992 | 1992-11-1 |
Hexagon Head Bolt with Hole | QJ 2365-1992 | 1992-11-1 |
Cross Recessed Raised Countersunk Head Screws | QJ 2378-1992 | 1992-11-1 |
Slotted Pan Head Screws with Waisted Shank | QJ 2380-1992 | 1992-11-1 |
Cross Recessed Pan Head Screws | QJ 2376-1992 | 1992-11-1 |
Cross Recessed Countersunk Head Screws | QJ 2377-1992 | 1992-11-1 |
Cheese Head Screw with Hole | QJ 2385-1992 | 1992-11-1 |
Knurled Thumb Screws with Waisted Shank | QJ 2381-1992 | 1992-11-1 |
Slotted Set Screws with Cone Point | QJ 2374-1992 | 1992-11-1 |
Flat Raised Head Screw | QJ 2387-1992 | 1992-11-1 |
Knurled Thumb Screws | QJ 2384-1992 | 1992-11-1 |
90° Raised Countersunk Head Screws | QJ 2388-1992 | 1992-11-1 |
Cheese Head Bolt with Hole | QJ 2368-1992 | 1992-11-1 |
Slotted Cheese Head Screws | QJ 2371-1992 | 1992-11-1 |
Hexagon Head Bolts | QJ 2366-1992 | 1992-11-1 |
Cup-head Bolts | QJ 2369-1992 | 1992-11-1 |
Slotted Set Screws with Flat Point | QJ 2375-1992 | 1992-11-1 |
Eye Bolts for Hexagon Head Screw Rods | QJ 2367-1992 | 1992-11-1 |
Slotted Pan Head Screws | QJ 2372-1992 | 1992-11-1 |
High strength bolts with large hexagon head for steel structures | GB/T 1228-1991 | 1992-1-1 |
Weld studs for capacitor discharge welding | GB/T 902.3-1989 | 1990-1-1 |
Weld studs for manual welding | GB/T 902.1-1989 | 1990-1-1 |
Weld studs for arc welding | GB/T 902.2-1989 | 1990-1-1 |
Cross recessed hexagon bolts with indentation | GB/T 29.2-1988 | 1989-7-1 |
Plastic diamond knurlhead screws | GB/T 840-1988 | 1989-7-1 |
Square head bolts; Product grade C | GB/T 8-1988 | 1989-7-1 |
Slotted raised countersunk head screws with waisted shank | GB/T 949-1988 | 1989-7-1 |
Slotted pan head screws with waisted shank | GB/T 837-1988 | 1989-7-1 |
Knurled screws | GB/T 835-1988 | 1989-7-1 |
Hexagon screws with waisted shank | GB/T 838-1988 | 1989-7-1 |
Slotted pan head set setscrews with dog point | GB/T 828-1988 | 1989-7-1 |
Knurled thumb screws | GB/T 834-1988 | 1989-7-1 |
Hexagon bolts with split pin hole on shank-Fine pitch thread-Product grade A and B | GB 31.3-1988 | 1989-7-1 |
Cross recessed small pan head screws | GB/T 823-1988 | 1989-7-1 |
Flat countersunk double nib bolts | GB/T 800-1988 | 1989-7-1 |
Hexagon bolts with wire holes on head; Reduced shank; Product grade B | GB 32.2-1988 | 1989-7-1 |
Slotted raised cheese head with shoulder | GB/T 946-1988 | 1989-7-1 |
Knurled thumb screws with waisted shank | GB/T 839-1988 | 1989-7-1 |
Hexagon bolts with split pin hole on shank-Reduced shank-Product grade B | GB 31.2-1988 | 1989-7-1 |
Slotted countersunk head screws with waisted shank | GB/T 948-1988 | 1989-7-1 |
Slotted setscrews with dog point | GB/T 829-1988 | 1989-7-1 |
Square set screws with chamfered end | GB/T 821-1988 | 1989-7-1 |
Bye bolts | GB 798-1988 | 1989-7-1 |
Hexagon bolts with wire holes on head; Fine pitch thread; Product grade A and B | GB 32.3-1988 | 1989-7-1 |
Hexagon bolts with wire holes on head; Product grade A and B | GB 32.1-1988 | 1989-7-1 |
Cross recessed hexagon head tapping screws with indentation | GB/T 9456-1988 | 1989-7-1 |
Eyelet bolts | GB 799-1988 | 1989-7-1 |
Eyelet bolts | GB/T 799-1988 | 1989-7-1 |
Double end studs bm=2d | GB/T 900-1988 | 1989-1-1 |
Double end studs bm=1.5d | GB/T 899-1988 | 1989-1-1 |
Slotted capstan screws | GB/T 832-1988 | 1989-1-1 |
Double end studs bm=1.5d | GB 899-1988 | 1989-1-1 |
Double end studs (clamping type)-Product grade C | GB/T 953-1988 | 1989-1-1 |
Double end studs-bm=1d | GB 897-1988 | 1989-1-1 |
Double end studs bm=1.25d | GB 898-1988 | 1989-1-1 |
Slotted large raised cheese head screws | GB/T 947-1988 | 1989-1-1 |
Double end studs (clamping type)-Product grade B | GB/T 901-1988 | 1989-1-1 |
Double end studs bm=1.25d | GB/T 898-1988 | 1989-1-1 |
Eyebolts | GB 825-1988 | 1989-1-1 |
Slotted cheese head screws with shoulder | GB/T 830-1988 | 1988-7-1 |
Slotted shoulder screws | GB/T 831-1988 | 1988-7-1 |
Square set screws with long dog point and rounded end | GB/T 83-1988 | 1988-7-1 |
Knurled screws with small head | GB/T 836-1988 | 1988-6-1 |
Bolts,round head with oval neck | GB/T 8262-1987 | 1988-5-1 |
Cross recessed round head wood screws | GB 950-1986 | 1987-6-1 |
Hexagon head wood screws | GB 102-1986 | 1987-6-1 |
Slotted raised countersunk head wood screws | GB 101-1986 | 1987-6-1 |
Cross recessed countersunk head wood screws | GB 951-1986 | 1987-6-1 |
Specifications for wood screws | GB 922-1986 | 1987-6-1 |
Slotted large cheese head screws | GB/T 833-1988 | 1987-6-1 |
Cross recessed raised countersunk head wood screws | GB 952-1986 | 1987-6-1 |
Hexagon lobular socket thread forming screws | GB/T 6564-1986 | 1987-5-1 |
Screw thread shanks for thread forming screw; Metric coarse thread series | GB/T 6559-1986 | 1987-5-1 |
Cross recessed raised countersunk head thread forming screws | GB/T 6562-1986 | 1987-5-1 |
Cross recessed pan head thread forming screws | GB/T 6560-1986 | 1987-5-1 |
Hexagon head thread forming screws | GB/T 6563-1986 | 1987-5-1 |
Cross recessed countersunk head thread forming screws | GB/T 6561-1986 | 1987-5-1 |
Hexagon flange bolts; Heavy series; Product grade B | GB/T 5790-1986 | 1986-10-1 |
Hexagon head bolts; Reduced shank; Product grades B | GB/T 5784-1986 | 1986-10-1 |
Hexagon lobular socket raised countersunk head screws | GB/T 2674-1986 | 1986-10-1 |
Hexagon lobular socket head cap screws--Property class 8.8 | GB/T 6191-1986 | 1986-10-1 |
Hexagon lobular socket pan head screws | GB/T 2672-1986 | 1986-10-1 |
Hexagon flange bolts; Heavy series; Product grade B | GB/T 5789-1986 | 1986-10-1 |
set screws with flat point | GB/T 73-1985 | 1986-6-1 |
Hexagon head tapping screws | GB/T 5285-1985 | 1986-6-1 |
Countersunk head screws; Head configuration and gauging | GB/T 5279-1985 | 1986-6-1 |
Fasteners; Clearance holes for bolts and screws | GB/T 5277-1985 | 1986-6-1 |
Slotted countersunk head tapping screws | GB/T 5283-1985 | 1986-6-1 |
Cross recessed raised countersunk head tapping screws | GB 847-1985 | 1986-6-1 |
Slotted pan head tapping screws | GB 5282-1985 | 1986-6-1 |
Slotted set screws with cone point | GB/T 71-1985 | 1986-6-1 |
Slotted raised countersunk head tapping screws | GB 5284-1985 | 1986-6-1 |
Slotted set screws with cup point | GB/T 74-1985 | 1986-6-1 |
set screws with dog point | GB/T 75-1985 | 1986-6-1 |
Fasteners; Bolts,screws,studs and nuts; Symbols and designations of dimensions | GB 5276-1985 | 1986-6-1 |
Countersunk head screws; Head configuration and gauging | GB 5279-1985 | 1986-6-1 |
Hexagon head tapping screws | GB 5285-1985 | 1986-6-1 |
Slotted countersunk head tapping screws | GB 5283-1985 | 1986-6-1 |
Cross recesses for screws | GB/T 944.1-1985 | 1986-6-1 |
Cross recessed pan head tapping screws | GB 845-1985 | 1986-6-1 |
Cross recesses for screws | GB 944.1-1985 | 1986-6-1 |
Slotted raised countersunk head tapping screws | GB/T 5284-1985 | 1986-6-1 |
Cross recessed countersunk head tapping screws | GB 846-1985 | 1986-6-1 |
Fasteners; Bolts,screws,studs and nuts; Symbols and designations of dimensions | GB/T 5276-1985 | 1986-6-1 |
Hexagon socket head shoulder screws | GB/T 5281-1985 | 1986-6-1 |
Square set screws with long dog point | GB/T 85-1988 | 1986-6-1 |
Slotted pan head tapping screws | GB/T 5282-1985 | 1986-6-1 |
Tapping screws thread | GB/T 5280-1985 | 1986-6-1 |
Screws,cross recessed,oval head | GB 973-1976 | 1977-10-1 |