Title |
Standard No. |
Implemented On |
Implementation rules for compulsory certification of agricultural machinery products - tractors - small- and medium-power ballooned tractor | CNCA 05C-074-2006 | |
Agricultural tractors and machinery—General purpose quick-action hydraulic couplers | GB/T 5862-2020 | 2021-6-1 |
Agricultural vehicles—Mechanical connections between towed and towing vehicles—Part 6:Specifications for non-swivel clevis couplings | GB/T 19408.6-2020 | 2021-6-1 |
Agricultural wheeled tractors—Operator's seat—Laboratory measurement of transmitted vibration | GB/T 8421-2020 | 2021-6-1 |
Agricultural vehicles—Mechanical connections on towed vehicles—Part 3:Swivel hitch rings | GB/T 32538.3-2020 | 2021-6-1 |
Agricultural wheeled tractors and field machinery—Measurement of whole-body vibration of the operator | GB/T 10910-2020 | 2021-6-1 |
Mechanical couplings between tractor and towed vehicle―Requirement and testing method | GB/T 35350-2017 | 2018-7-1 |
Tractor reliability―Bench test procedures | GB/T 35218-2017 | 2018-7-1 |
Wheeled tractor--Front drive axle | GB/T 21958-2017 | 2018-4-1 |
Walking tractor - Drawbar dimensions and power take-off types | GB/T 34372-2017 | 2018-4-1 |
Agricultural tractors--General requirement--Part 7: Three-wheel boat tractors | GB/T 15370.7-2017 | 2018-4-1 |
Protective structures on agricultural and forestry tractors--Static testing method and accepting condition | GB/T 19498-2017 | 2018-4-1 |
Tractors and machinery for agriculture and forestry―Seat belts―Part 1:Anchorage location requirement | GB/T 33641.1-2017 | 2017-12-1 |
Tractors and machinery for agriculture and forestry―Seat belts―Part 2:Anchorage strength requirements | GB/T 33641.2-2017 | 2017-12-1 |
Tractors and machinery for agriculture and forestry―Seat belts―Part 3:Requirements for assemblies | GB/T 33641.3-2017 | 2017-12-1 |
Tractor tires for agriculture and forestry -- Test procedures of quick abrasion resistance | GB/T 33642-2017 | 2017-12-1 |
Tractors, machinery for agriculture and forestry, powered lawn and garden equipment―Symbols for operator controls and other displays―Part 2: Symbols for agricultural tractors and machinery | GB/T 4269.2-2016 | 2017-5-1 |
Agricultural tractors--General requirements--Part 6:Four-wheel boat tractors | GB/T 15370.6-2016 | 2016-9-1 |
Agricultural tractors―Rear-mounted power take-off types 1,2,3 and 4―Part 2:Narrow-track tractors,dimensions for master shield and clearance zone | GB/T 1592.2-2016 | 2016-9-1 |
Agricultural tractors―Rear-mounted power take-off types 1,2,3 and 4―Part 1:General specifications,safety requirements,dimensions for master shield and clearance zone | GB/T 1592.1-2016 | 2016-9-1 |
Agricultural vehicles―Mechanical connections on towed vehicles―Part 2:Coupling ring 40 with socket | GB/T 32538.2-2016 | 2016-9-1 |
Agricultural tractors―Rear-mounted power take-off types 1,2,3 and 4―Part 3:Main PTO dimensions and spline dimensions,location of PTO | GB/T 1592.3-2016 | 2016-9-1 |
Agricultural tractors―Requirements for steering | GB/T 19040-2016 | 2016-9-1 |
Agricultural vehicles―Mechanical connections on towed vehicles―Part 1:Dimensions for hitch rings of 50/30 mm cross section | GB/T 32538.1-2016 | 2016-9-1 |
Protective structure strength on narrow-track wheeled agricultural and forestry tractors—Testing method and acceptance condition—Part 1:Static testing method of front mounted ROPS | GB/T 21956.1-2015 | 2016-7-1 |
Agricultural tractors―Test procedures―Part 21:Stability | GB/T 3871.21-2015 | 2016-7-1 |
Protective structure strength on narrow-track wheeled agricultural and forestry tractors—Testing method and acceptance condition—Part 2:Dynamic testing method of front mounted ROPS | GB/T 21956.2-2015 | 2016-7-1 |
Agricultural tractors―Test procedures―Part 20:Test methods of tractor bumpiness | GB/T 3871.20-2015 | 2016-7-1 |
Lawn and garden tractors―Three-point hitch | GB/T 14226-2015 | 2015-9-1 |
Agricultural wheeled tractors―Front-mounted equipment―Part 2:Stationary equipment connection | GB/T 10916.2-2015 | 2015-9-1 |
Agricultural wheeled tractor―Rear-mounted three-point linkage―Categories 0、1N、1、2N、2、3N、3、4N and 4 | GB/T 1593-2015 | 2015-9-1 |
Agricultural Equipment - Mechanical Connections Between Towed and Towing Vehicles - Implement Hitch Rings and Attachment to Tractor Drawbars | GB/T 30465-2013 | 2014-10-1 |
Evaluation methods of realiability for tractors | NY/T 2453-2013 | 2014-1-1 |
Repairing quality for Wheeled tractors-Part 2:Direct drive wheeled tractors | NY/T 1928.2-2013 | 2014-1-1 |
Specifications of safety certification for small tractors | NY/T 2455-2013 | 2014-1-1 |
Wheeled tractors for agricultural and forestry—Performance requirements of service braking device | GB/T 29008-2012 | 2013-7-1 |
General requirement of agricultural tractors—Part 1:under 50 kW wheeled tractors | GB/T 15370.1-2012 | 2013-7-1 |
General requirement of agricultural tractors—Part 3:Over 130 kW wheeled tractors | GB/T 15370.3-2012 | 2013-7-1 |
General requirement of agricultural tractors—Part 5:Belt-drive wheeled tractors | GB/T 15370.5-2012 | 2013-7-1 |
Tractors and machinery for agricultural and forestry—Requirements of the lighting and light-signalling devices | GB/T 28693-2012 | 2013-1-1 |
General requirement of agricultural tractors—Part 4:Crawler tractors | GB/T 15370.4-2012 | 2012-10-1 |
Belt-drive tractors - Transimission efficience limitation & determination method - Part 1: Wheeled tractor | GB 25682.1-2010 | 2012-1-1 |
Tractors and machinery for agricultural and forestry—Windowscreen wiper | GB/T 25424-2010 | 2011-3-1 |
Test methods of static lateral stability for wheeled tractors | NY/T 1929-2010 | 2010-9-1 |
Repairing quality for wheeled tractors-Part1:Belt-driven wheeled tractors | NY/T 1928.1-2010 | 2010-9-1 |
Equipment for internal farm work and husbandry-Metal grids for cattle stalls | JB/T 10130-2010 | 2010-7-1 |
Safety requirement for agriculture and forestry tractor fuel tank | GB/T 24387-2009 | 2010-7-1 |
Sizes of the products and rules of drafting for the Livestock Machinery | JB/T 8581-2010 | 2010-7-1 |
Safety requirement for agriculture and forestry tractor fuel tank | GB 24387-2009 | 2010-7-1 |
Tractor’s connective equipment for trailers—Types dimensions and mounting requirement | GB/T 2779-2009 | 2010-5-1 |
Steering rocking arm of wheeled tractors—Specifications | GB/T 24652-2009 | 2010-5-1 |
Agricultural tractors—Remote control hydraulic cylinders for trailed implements | GB/T 24655-2009 | 2010-5-1 |
Agricultural crawler tractors—Metal track—Requirement | GB/T 24659.4-2009 | 2010-5-1 |
Slush seal performance of tractors—Test procedures | GB/T 24645-2009 | 2010-5-1 |
Air compressor of pneumatic braking system of tractor-trailers—Specifications | GB/T 24649.3-2009 | 2010-5-1 |
Distributor of pneumatic braking system of tractor-trailers—Specifications | GB/T 24649.2-2009 | 2010-5-1 |
Assessment of tractor reliability | GB/T 24648.1-2009 | 2010-5-1 |
Agricultural vehicles—Mechanical connections between towed and towing vehicles—Part 5:Dimensions of ball-type coupling device | GB/T 19408.5-2009 | 2010-5-1 |
Agricultural wheeled tractors and attachment—Front loaders—Carriages for attachments | GB/T 24654-2009 | 2010-5-1 |
Agricultural crawler tractors—Track idler—Requirement | GB/T 24659.1-2009 | 2010-5-1 |
Chemical analysis methods of rare earth chloride and light rare earth carbonate—Part 14:Determination of phosphorus radical content—Phosphorus-antimonate-molybdenum blue spectrophotometry | GB/T 15370.2-2009 | 2010-5-1 |
Agricultural vehicles—Mechanical connections between towed and towing vehicles—Part 2:Specifications for clevis coupling 40 | GB/T 19408.2-2009 | 2010-5-1 |
Agricultural and forestry tractors—Operators seat—Specifications | GB/T 24660.1-2009 | 2010-5-1 |
Reliability assessment of engineering and agricultural machine—Evaluation parameter system and failure classification code | GB/T 24648.2-2009 | 2010-5-1 |
Three-point quick-attaching coupler of implement to agricultural wheeled tractors—Category 3N、4N | GB/T 7120-2009 | 2010-5-1 |
Tractor declared power—Test methods | GB/T 24646-2009 | 2010-5-1 |
Brake valve of pneumatic braking system of tractor-trailers—Specifications | GB/T 24649.4-2009 | 2010-5-1 |
Diesel filter of tractors—Specifications | GB/T 24656-2009 | 2010-5-1 |
Running-in procedures for belt-driven wheeled tractors | GB/T 24642-2009 | 2010-5-1 |
Tractor spline shaft—Specifications | GB/T 24650-2009 | 2010-5-1 |
Exhaust silencers of tractor—Specifications | GB/T 24658-2009 | 2010-5-1 |
Agricultural tractors—Instructional seat | GB/T 24660.2-2009 | 2010-5-1 |
crawler tractors-Track idler-Requirement | GB/T 24659.2-2009 | 2010-5-1 |
Agricultural crawler tractors—Support roller—Requirement | GB/T 24659.3-2009 | 2010-5-1 |
Tractors equipped with implements—General requirement | GB/T 24641-2009 | 2010-5-1 |
Half-axle of agricultural wheeled tractors—Specifications | GB/T 24653-2009 | 2010-5-1 |
Brake chamber of pneumatic braking system of tractor-trailers—Specifications | GB/T 24649.5-2009 | 2010-5-1 |
Air reservoir of pneumatic braking system of tractor-trailers—Specifications | GB/T 24649.1-2009 | 2010-5-1 |
Specifications—Tractor shifting forks | GB/T 24651-2009 | 2010-5-1 |
Tractors for paddy and dry field—Specifications | GB/T 24640-2009 | 2010-5-1 |
Adaptability evaluation of tractors | GB/T 24647-2009 | 2010-5-1 |
Agricultural vehicles—Mechanical connections between towed and towing vehicles—Part 3:Tractor drawbar | GB/T 19408.3-2009 | 2010-5-1 |
GB/T 19408.4-2009 | GB/T 19408.4-2009 | 2010-5-1 |
Testing method and performance requirement of falling object protective structures on agricultural and forestry tractors | GB/T 24644-2009 | 2010-5-1 |
Test methods for tractor fuel tank | GB/T 23292-2009 | 2009-10-1 |
Safety requirements for tractors - Part 2: Walking tractors | GB 18447.2-2008 | 2009-10-1 |
The strength testing method and accepting condition of protective structures on narrow-track wheeled agricultural and forestry tractors - Part 4: Dynamic testing method of rear mount | GB/T 21956.4-2009 | 2009-10-1 |
Safety requirements for tractors - Part 3: Crawler tractors | GB 18447.3-2008 | 2009-10-1 |
Safety requirements for tractors - Part 4: Belt - Drive wheeled tractors | GB 18447.4-2008 | 2009-10-1 |
Limites of tractor noise | GB 6376-2008 | 2009-7-1 |
Fuel efficiency evaluation criteria of agricultural wheeled tractors | NY/T 1773-2009 | 2009-5-20 |
Technical requirements for tractor safety signs,symbols for controls and displays | NY/T 1769-2009 | 2009-5-20 |
Test methods of applicability for agricultural wheeled tractors | NY/T 1767-2009 | 2009-5-20 |
Agricultural tractors - Rear- mounted power take-off types 1 2 and 3 - Part 2: Narrow-track tractors dimensions for master shield and clearance zone | GB/T 1592.2-2008 | 2009-2-1 |
Prohibition and scrapping for tractors | GB/T 16877-2008 | 2009-2-1 |
Agricultural tractors - Rear- mounted power take-off types 1 2 and 3 - Part 1: General specifications safety requirements dimensions for master shield and clearance zone | GB/T 1592.1-2008 | 2009-2-1 |
Agricultural tractors - Rear- mounted power take-off types 1 2 and 3 - Part 3: Main PTO dimensions and spline dimensions location of PTO | GB/T 1592.3-2008 | 2009-2-1 |
The strength testing method and accepting condition of protective structures on narrow-track wheeled agricultural and forestry tractors - Part 3:Static testing method of rear mounted ROPS | GB/T 21956.3-2008 | 2009-1-1 |
The strength testing method and accepting condition of protective structures on narrow-track wheeled agricultural and forestry tractors - Part 1: Static testing method of front mount | GB/T 21956.1-2008 | 2009-1-1 |
Tractors and machinery for agriculture and forestry - Paper friction disc - Technical specifications | GB/T 21955-2008 | 2009-1-1 |
The testing method and accepting condition of the driver’s seat on agricultural and forestry tractors | GB/T 21960-2008 | 2009-1-1 |
The strength testing method and accepting conditions of the rear-mounted protective structures on wheeled agricultural and forestry tractors - Part 1: Static testing method of rear mo | GB/T 7121.1-2008 | 2009-1-1 |
The strength testing method and accepting condition of protective structures on narrow-track wheeled agricultural and forestry tractors - Part 2: Dynamic testing method of front moun | GB/T 21956.2-2008 | 2009-1-1 |
Specifications for transportation derived from walking tractors | JB/T 8657-2008 | 2008-11-1 |
Safety requirements for tractors - Part 1: Wheeled tractors | GB 18447.1-2008 | 2008-10-1 |
The strength testing method and accepting condition of the protective structures on wheeled agricultural and forestry tractors - Part 2: Dynamic testing method | GB/T 7121.2-2008 | 2008-7-9 |
Mechanical steering system of wheeled tractor-Test method | JB/T 7279-2008 | 2008-7-1 |
Specifications for brake system of wheeled tractor-trailer set | JB/T 5997-2008 | 2008-7-1 |
Tractor and machinery for agriculture and forestry—Rims | GB/T 3373-2008 | 2008-7-1 |
Test method of brake system for tractor | JB/T 7280-2008 | 2008-7-1 |
Tractors and machinery for agriculatural and forestry—Seat index point | GB/T 6236-2008 | 2008-7-1 |
and machiney for agricultural and forestry - Test methods of wheels side load fatigue | GB/T 14785-2008 | 2008-7-1 |
Static stablization test procedures of wheeled tractor equiped with front loader and rear excavator equipment | JB/T 10834-2008 | 2008-7-1 |
Drawbars for agricultural tractors - Types dimensionsand mounting requirements | GB/T 2780-2008 | 2008-7-1 |
Cooling water radiator for tractor diesel engines - Method of indentification symbols | GB/T 6573-2008 | 2008-7-1 |
Headlights for tractors | JB/T 6701-2008 | 2008-7-1 |
and machinery for agriculture and forestry - Test methods of the driving wheels torsion fatigue | GB/T 14786-2008 | 2008-7-1 |
Test procedures of slush seal performance of tractors | JB/T 7734-2008 | 2008-7-1 |
Specifications for Tractor Hydraulic lifters | JB/T 5998-2007 | 2008-1-1 |
Specifications for hydraulic hitch system of agricultural tractors | JB/T 6714.1-2007 | 2008-1-1 |
Test method for hydraulic hitch system of agricultural tractors | JB/T 6714.2-2007 | 2008-1-1 |
Prescription for installation of the lighting and light-signalling devices for wheeled agricultural and forestry tractors | GB/T 20949-2007 | 2007-11-1 |
Power take-off pulley for agricultural tractors—Peripheral speed and width | GB/T 2778-2007 | 2007-11-1 |
Test methods for forestry wheeled tractors and crawler tractors | GB/T 15833-2007 | 2007-11-1 |
Test methods for walking tractors | GB/T 6229-2007 | 2007-11-1 |
General specifications for forestry wheeled and track laying tractors | GB/T 15832-2007 | 2007-11-1 |
Tractors and machinery for agriculture and forestry—Determination of burning behavior of cab interior materials | GB/T 20953-2007 | 2007-11-1 |
Rear-view mirrors requirements for agricultural and forestry tractors | GB/T 20948-2007 | 2007-11-1 |
Method of vibration measurement for walking tractors | GB/T 7927-2007 | 2007-11-1 |
Installation dimensions of starters applied for motor vehicles and internal-combustion engine | JB/T 6699-2007 | 2007-9-1 |
Specifications of starter direction exchanger applied for motor vehicles and internal-combustion engine | JB/T 6708-2007 | 2007-9-1 |
Specifications of speed & hour meters for motor vehicles and internal-combustion engine - Part 1: Magnetic inductive meters | JB/T 2428.1-2007 | 2007-9-1 |
Installation dimensions of permanent magnetic generators applied for motor vehicles and internal-combustion engine | JB/T 6698-2007 | 2007-9-1 |
Agricultural and forest tractor-Static test procedures on slope | JB/T 6000-2007 | 2007-9-1 |
Code for permanent magnetive generator for motor vehicles and internal-combustion engine | JB/T 6711-2007 | 2007-9-1 |
Specifications of speed & hour meters for motor vehicles and internal-combustion engine-Part 2:Electromagnetic meters | JB/T 2428.2-2007 | 2007-9-1 |
PTO for walking tractors | JB/T 7278-2007 | 2007-9-1 |
Installation dimensions of AC generators applied for motor vehicles and internal-combustion engine | JB/T 6700-2007 | 2007-9-1 |
Tractors terminology—Part 5: Steering system | GB/T 6960.5-2007 | 2007-8-1 |
GB/T 6960.6-2007 拖拉机术语 第6部分: 液压悬挂系及牵引、拖挂装置 | GB/T 6960.6-2007 | 2007-8-1 |
Agricultural wheeled tractors-Evaluation criteria of whole body vibration of the operator | GB/T 13876-2007 | 2007-8-1 |
Tractor terminology—Part 1:Complete tractor | GB/T 6960.1-2007 | 2007-8-1 |
Tractor terminology—Part 7: Cab seat and sheet metal | GB/T 6960.7-2007 | 2007-8-1 |
Tractor terminology—Part 2:Transmission system | GB/T 6960.2-2007 | 2007-8-1 |
Tractor terminology—Part 4: Running gears and undercarriages | GB/T 6960.4-2007 | 2007-8-1 |
Wheeled tractors—Maximum speeds—Method of determination | GB/T 20792-2006 | 2007-7-1 |
Tractors for agriculture and forestry - Mountings and apertures for external equipment controls | GB/T 20791-2006 | 2007-7-1 |
Tractor driving license | NY 346-2007 | 2007-7-1 |
Combine Driving License | NY 1371-2007 | 2007-7-1 |
Wheeled tractor-Hub bolts wheel screws and nuts-Specifications | JB/T 10652-2006 | 2007-5-1 |
Specifications of chassis of walking tractor | JB/T 10651-2006 | 2007-5-1 |
Rubberized Oil Tube of Hi-temperature and low pressure for Agriculture and forest tractor and machinery | JB/T 10637-2006 | 2007-4-1 |
Specifications of starters solenoid switch applied for motor vehicles and internal-combustion engine | JB/T 6706-2006 | 2007-3-1 |
Tractor counter balances-specifications | JB/T 10612-2006 | 2007-3-1 |
Specifications of alternators electronic voltage regulater applied for motor vehicles and internal-combustion engine | JB/T 6709-2006 | 2007-3-1 |
Specifications of alternators applied for motor vehicles and internal-combustion engine | JB/T 6710-2006 | 2007-3-1 |
Specifications of starters applied for motor vehicles and internal-combustion engine | JB/T 6707-2006 | 2007-3-1 |
Agricultural tractors and machinery - Coding of remote hydraulic power services and controls | GB/T 20342-2006 | 2007-2-1 |
Agricultural vehicles - Mechanical connections on towed vehicles - Dimensions for hitch rings | GB/T 20338-2006 | 2007-2-1 |
Agricultural tractors and machinery - Tractor-mounted sensor interface - Specifications | GB/T 20339-2006 | 2007-2-1 |
Wheeled tractor steering system-Steering knuckle | NY/T 1128-2006 | 2006-10-1 |
Rules for the inspection of agricultural machinery for import and export--Part 2:Tractors | SN/T 1646.2-2005 | 2006-5-1 |
Agricultural tractors - Test procedures - Part 10: Low temperature starting | GB/T 3871.10-2006 | 2006-4-1 |
Agricultural tractors- Test procedures- Part6: Determination of braking performance | GB/T 3871.6-2006 | 2006-4-1 |
Agricultural tractors- Test procedures- Part3:Power tests for power take-off | GB/T 3871.3-2006 | 2006-4-1 |
Agricultural tractors - Test procedures - Part 14: Partial power PTO - Non-mechanically transmitted power | GB/T 3871.14-2006 | 2006-4-1 |
Agricultural tractors- Test procedures- Part13: Measurement of exhaust smoke | GB/T 3871.13-2006 | 2006-4-1 |
Technical specification of quality evaluation for agricultural trailer | NY/T 1008-2006 | 2006-4-1 |
Agricultural tractors - Test procedures - Part 2: Measurements of tractor parameters | GB/T 3871.2-2006 | 2006-4-1 |
Agricultural tractors—Test procedures—Part 8:Noise measurement | GB/T 3871.8-2006 | 2006-4-1 |
Agricultural tractors - Test procedures - Part 17: Engine air cleaner | GB/T 3871.17-2006 | 2006-4-1 |
Agricultural tractors- Test procedures- Part18: Hydraulic power at tractor/implement interface | GB/T 3871.18-2006 | 2006-4-1 |
Agricultural tractors—Test procedures—Part15: Centre of gravity | GB/T 3871.15-2006 | 2006-4-1 |
Technical specifications of quality evaluation for walking tractors | NY/T 1012-2006 | 2006-4-1 |
Agricultural tractors- Test procedures- Part16: Axle power determination | GB/T 3871.16-2006 | 2006-4-1 |
Agricultural tractors- Test procedures- Part11: Suitability tests for hot atmosphere | GB/T 3871.11-2005 | 2006-4-1 |
Agricultural tractors- Test procedures- Part19: Steering capability of wheeled tractors | GB/T 3871.19-2006 | 2006-4-1 |
Agricultural tractors- Test procedures- Part5: Turning and clearance diameters | GB/T 3871.5-2006 | 2006-4-1 |
Agricultural tractors - Test procedures - Part 9: Power tests for drawbar | GB/T 3871.9-2006 | 2006-4-1 |
Agricultural tractors—Test procedures—Part 7:Operators field of vision | GB/T 3871.7-2006 | 2006-4-1 |
Agricultural tractors - Test procedures - Part 1: General requirements | GB/T 3871.1-2006 | 2006-4-1 |
Agricultural tractors - Test procedures - Part 4: Rear three-point linkage lifting capacity | GB/T 3871.4-2006 | 2006-4-1 |
Agricultural tractors - Test procedures - Part14: Partial power PTO - Non-mechanically transmitted power | SB/T 10398.2-2005 | 2006-3-1 |
Specifications for belt-driven wheeled tractors | JB/T 10495-2005 | 2005-9-1 |
Fast simulation test procedure for cylinder liners and rings | JB/T 9758-2004 | 2005-4-1 |
Tractor appearance quality | JB/T 6712-2004 | 2005-4-1 |
Tractor running license | NY 347.1-2005 | 2005-1-17 |
Combine running license | NY 347.2-2005 | 2005-1-17 |
Tractor number plate | NY 345.1-2005 | 2005-1-17 |
Combine number plate | NY 345.2-2005 | 2005-1-17 |
Agricultural tractors and machinery―General purpose quick-action hydraulic couplers | GB/T 5862-2004 | 2004-10-1 |
General requirement of walking tractors | GB/T 13875-2004 | 2004-10-1 |
Agricultural wheeled tractors—Rear mounted three-point linkage—Part 4:Category 0 | GB/T 1593.4-2004 | 2004-10-1 |
Agricultural wheeled tractors and fieled machinery—Measurement of whole-body vibration of the operator | GB/T 10910-2004 | 2004-10-1 |
Agricultural vehicles - Mechanical hook-type connections on towing vehicles - Test methods and requirements | GB/T 19497-2004 | 2004-10-1 |
Matching of agricultural wheeled tractors and rear mounted implements | GB/T 10911-1989 | 2004-10-1 |
The static testing method and accepting technical condition of the protective structures on agricultural and forestry tractors | GB/T 19498-2004 | 2004-10-1 |
Agricultural tractors - Operators seating accommodation - Dimensions | GB/T 6235-2004 | 2004-9-1 |
Agricultural tractors - Operators workplace,access and exit - Dimensions | GB/T 6238-2004 | 2004-9-1 |
Type and specifications of oil for tractors | JB/T 7282-2004 | 2004-8-1 |
Tractor transmisson gear-Specifications | JB/T 5615-2004 | 2004-8-1 |
Code rule for tractor part drawings and designing files | JB/T 6702-2004 | 2004-8-1 |
Agricultural tractor - Maximum actuating forces required to operate controls | GB/T 19407-2003 | 2004-6-1 |
Test methods for agricultural trailer | GB/T 4331-2003 | 2004-6-1 |
Agricultural wheeled tractors—Rear mounted three-point linkage—Part 2:Category 1N(Narrow hitch) | GB/T 1593.2-2003 | 2004-6-1 |
of agricultural wheeled tractors and rear mounted implements | GB/T 10911-2003 | 2004-6-1 |
Agricultural vehicles—Mechanical connections between towed and towing vehicles—Part 1:Dimensions of hitch-hooks | GB/T 19408.1-2003 | 2004-6-1 |
Wrought aluminum alloy extruded profiles for railroad vehicle structures | GB/T 19347-2003 | 2004-5-1 |
Agricultural trailer | GB/T 4330-2003 | 2004-5-1 |
and self-propelled machines for agriculture and forestry - Operator enclosure environment - Part 3: Determination of effect of solar heating | GB/T 13877.3-2003 | 2003-8-1 |
and self-propelled machines for agriculture and forestry - Operator enclosure environment - Part 2: Heating, ventilation and air - Conditioning test method and performance | GB/T 13877.2-2003 | 2003-8-1 |
Agricultural tractors—Steering requirements | GB/T 19040-2003 | 2003-8-1 |
and self-propelled machines for agriculture and forestry - Operator enclosure environment - Part 5: Pressurization system test method | GB/T 13877.5-2003 | 2003-8-1 |
Operating requirements for tractors power take-off and drawbars | GB/T 6961-2003 | 2003-8-1 |
and self-propelled machines for agriculture and forestry - Operator enclosure environment - Part 1: Vocabulary | GB/T 13877.1-2003 | 2003-8-1 |
and self-propelled machines for agriculture and forestry - Operator enclosure environment - Part 4: Air filter element test method | GB/T 13877.4-2003 | 2003-8-1 |
wheeled tractors - Front-mounted equipment - Part 1: Power take-off and three-point linkage | GB/T 10916-2003 | 2003-8-1 |
Technical requirements of hydrostatic steering system for wheeled tractors | JB/T 5178-2002 | 2003-4-1 |
Test method of hydrostatic steering system for wheeled tractors | JB/T 5183-2002 | 2003-4-1 |
Safety requirements for walking tractors | GB 18447.2-2001 | 2001-12-1 |
Tractor and machinery for agriculture and forestry-Linch pins and spring pins-Dimensions and requirements | GB/T 4329-2001 | 2001-9-1 |
Safety requirement for agricultural wheeled and crawler tractors | GB 18447.1-2001 | 2001-1-2 |
Specifications for tractor clutch disk assemblies | JB/T 9836-2000 | 2001-1-1 |
Evaluation methods for reliability design of tractors | JB/T 51103-2000 | 2000-12-1 |
Tractor Products - Reliability Test | JB/T 51082-2000 | 2000-12-1 |
Tractor Manufacturer - Product Reliability Management Methods | JB/T 51102-2000 | 2000-12-1 |
Tractors, machinery for agriculture and forestry, powered lawn and garden equipment-Symbols for operator controls and other displays-Part 1:Common symbols | GB/T 4269.1-2000 | 2000-11-1 |
Tractors, machinery for agriculture and forestry, powered lawn and garden equipment-Symbols for operator controls and other display-Part 2:Symbols for agricultural tractors and machin | GB/T 4269.2-2000 | 2000-11-1 |
Tractors, machinery for agriculture and forestry, powered lawn and garden equipment-Symbols for operator controls and other display-Part 3:Symbols for powered lawn and garden equipmen | GB/T 4269.3-2000 | 2000-11-1 |
Tractors and machinery for agriculture and forestry--Guards for power take-off (PTO)drive-shafts--Part 1:Strength test | GB/T 5263.1-2000 | 2000-9-1 |
Tractors and machinery for agriculture and forestry--Guards for power take-off (PTO)drive-shafts--Part 2:Wear test | GB/T 5263.2-2000 | 2000-9-1 |
Laboratory measurement and limits of operators seat transmitted vibration for agricultural wheeled tractors | GB/T 8421-2000 | 2000-9-1 |
Bourdon tube temperature gauge for tractors and internal combustion engines | JB/T 9841-1999 | 2000-1-1 |
Tehnical specifications for alternatie generator with vaccum pump | JB/T 10134-1999 | 2000-1-1 |
Bourdon tube pressure gauge for tractors and internal combustion engines | JB/T 9842-1999 | 2000-1-1 |
Tractors for agriculture - Specifications pattern for operator′s manuals | JB/T 9830-1999 | 2000-1-1 |
Tractors for agriculture - Seat safety belt | JB/T 8303-1999 | 2000-1-1 |
Test methods for agricultural passenger vehicles | JB/T 10133-1999 | 2000-1-1 |
General specifications for agricultural passenger vehicles | JB/T 10132-1999 | 2000-1-1 |
Tractor differentials - Test methods | JB/T 9826-1999 | 2000-1-1 |
Gear pumps for agriculture - Dimensions series and identification code for mounting flanges and shaft ends | JB/T 9835.2-1999 | 2000-1-1 |
Wheels of tractor and machinery for agriculture and forestry - Specifications | JB/T 8887-1999 | 2000-1-1 |
Agricultural wheeled tractor track widths | JB/T 8300-1999 | 2000-1-1 |
Magneto-generator for tractors | JB/T 9844-1999 | 2000-1-1 |
Boat tractors - General specifications | JB/T 8298-1999 | 2000-1-1 |
Instruments for tractors and internal combustion engines - Code of model designations | JB/T 9845-1999 | 2000-1-1 |
Determination of tractor transmission efficiency | JB/T 8299-1999 | 2000-1-1 |
Technical specifications for bulk feed delivery trucks | JB/T 9868.2-1999 | 2000-1-1 |
Technical specifications for orbit hydrostatic steering gear with closed-center rotary valve | JB/T 9839-1999 | 2000-1-1 |
Electromagnetic ammeter for tractors and internal combustion engines | JB/T 9843-1999 | 2000-1-1 |
Tractors and machinery for agriculture and forestry - Paints adherence performance - aross-cut test | JB/T 9832.2-1999 | 2000-1-1 |
Calculation methods of lad capacity of cylindrical gears for tractors | JB/T 9837-1999 | 2000-1-1 |
The terminology of parts and components of tractor chassis | JB/T 9833-1999 | 2000-1-1 |
Frontaxle of wheeled tractors - Specifications | JB/T 9828-1999 | 2000-1-1 |
Tractors and machinery for agriculture and forestry - Visual comparison of the color of paints | JB/T 9832.1-1999 | 2000-1-1 |
Agricultural wheeled tractors and implements--Three-point hitch couplers--Part 3:Link coupler | GB/T 17127.3-1998 | 1999-7-1 |
Agricultural wheeled tractors and implements--Three-point hitch couplers--Part 1: U-frame coupler | GB/T 17127.1-1998 | 1999-7-1 |
Tractors and machinery for agriculture and forestry--Wheel-to-hub fixing dimensions | GB/T 6232-1998 | 1999-7-1 |
Tractor transmission - quick durable test methods | JB/T 9838-1999 | 1999-4-5 |
Lawn and garden ride-on (riding) tractors - Drawbar | GB/T 17124-1997 | 1998-10-1 |
Agricultural tractors and implements - Four-point rigid hitch - Specifications | GB/T 17125-1997 | 1998-10-1 |
Lawn and garden ride-on (riding) tractors—Power take-off | GB/T 17122-1997 | 1998-10-1 |
Agricultural tractors and machinery―Power take-off drive shafts and position of power-input connection | GB/T 17126-1997 | 1998-10-1 |
Lawn and garden ride-on (riding) tractors - One-point tubular sleeve hitch | GB/T 17123-1997 | 1998-10-1 |
Agricultural wheeled tractors and implements--Three-point hitch coupler--Part 2: A-frame coupler | GB/T 17127.2-1997 | 1998-10-1 |
General specifications of thermoplastic parts for tractors | JB/T 8720-1998 | 1998-7-1 |
Prohibition and scrapping for tractors | GB/T 16877-1997 | 1998-1-1 |
Agricultural tractors-Operators seating accommodation-Dimensions | GB/T 6235-1997 | 1997-8-1 |
Agricultural wheeled tractors-Rear-mounted three-point linkage - Part 1: Categories 1,2,3 and 4 | GB/T 1593.1-1996 | 1996-11-1 |
Methods of test for walking tractor | GB/T 6229-1995 | 1996-6-1 |
Test methods for forestry wheeled and tracklaying tractors | GB/T 15833-1995 | 1996-6-1 |
Tractor terminology; Part 1: Complete tractor | GB/T 6960.1-1995 | 1996-6-1 |
General specifications for forestry wheeled and tracklaying tractors | GB/T 15832-1995 | 1996-6-1 |
Tractor terminology-Transmission system | GB/T 6960.2-1995 | 1996-6-1 |
Tractor terminology-Running gears and undercarriages | GB/T 6960.4-1995 | 1996-6-1 |
Tractor terminology-Hydraulic hitch system and drawbar、hook | GB/T 6960.6-1995 | 1996-6-1 |
Tractor terminology-Cab、seat and sheet metal | GB/T 6960.7-1995 | 1996-6-1 |
Noise limitation for tractors | GB 6376-1995 | 1996-5-1 |
Tractors and machinery for agriculture and forestry--Technical means for ensuring safety--Part 3: Tractors | GB 15369-1994 | 1995-7-1 |
Wheels torsion fatigue test methods for tractors, agricultural and forestry machines | GB/T 14786-1993 | 1994-8-1 |
Wheels side load fatigue test methods for tractors, agricultural and forestry machines | GB/T 14785-1993 | 1994-8-1 |
Test methods for agricultural wheeled and tracklaying tractors . Part 10: Low temperature starting tests | GB/T 3871.10-1993 | 1993-10-1 |
Test methods for agricultural wheeled and tracklaying tractors . Part 8: Measurements of noise | GB/T 3871.8-1993 | 1993-10-1 |
Test methods for agricultural wheeled and tracklaying tractors . Part 9: Drawbar power tests | GB/T 3871.9-1993 | 1993-10-1 |
Test methods for agricultural wheeled and tracklaying tractors―Part 1: General requirements | GB/T 3871.1-1993 | 1993-10-1 |
Test methods for agricultural wheeled and tracklaying tractors . Part 5: Turning and clutch operating tests | GB/T 3871.5-1993 | 1993-10-1 |
Test methods for agricultural wheeled and tracklying tractors Part 3: PTO power tests | GB/T 3871.3-1993 | 1993-10-1 |
Test methods for agricultural wheeled and tracklaying tractors. Part 2: Measurements of tractor parameters | GB/T 3871.2-1993 | 1993-10-1 |
Lawn and garden tractors-Three-point hitch | GB/T 14226-1993 | 1993-10-1 |
Test methods for agricultural wheeled and tracklying tractors . Part 6: Braking tests | GB/T 3871.6-1993 | 1993-10-1 |
Test methods for agricultural wheeled and tracklaying tractors . Part 4: Hydraulic lifting capacity and power tests | GB/T 3871.4-1993 | 1993-10-1 |
Test methods for agricultural wheeled and tracklaying tractors . Part 7: Measurements of operators field vision | GB/T 3871.7-1993 | 1993-10-1 |
Test methods for agricultural wheeled and tracklaying tractors . Part 11: Suitability tests for hot atmosphere | GB/T 3871.11-1993 | 1993-10-1 |
Power take-off safety shield for agricultural tractors Types dimensions and strength specifications | GB/T 2777-1992 | 1993-7-15 |
Agricultural tractors and self-propelled machines-Test method for enclosure pressurization systems | GB/T 13877-1992 | 1993-7-15 |
Agricultural wheeled tractors-Evaluation criteria of whole body vibration of the operator | GB/T 13876-1992 | 1993-7-15 |
Darawbars for agricultural tractors―Types dimensions and mounting requirements | GB/T 2780-1992 | 1993-7-1 |
Power take-off pulley for agricultural tractors―Peripheral speed and width | GB/T 2778-1992 | 1993-7-1 |
Agricultural tractors and self-ropelled machines-Performance of heating and ventilation systems in closed cabs-Method of test | GB/T 13878-1992 | 1993-7-1 |
The general specification for walking tractors | GB/T 13875-1992 | 1993-7-1 |
Agricultural wheeled tractors―Measurement of whole-body vibration of the operator | GB/T 10910-1989 | 1990-1-1 |
Three-Point hitch implement quick-attaching coupler of agricultural wheeled tractors--Category 3N | GB/T 7120-1986 | 1987-9-1 |
Agricultural wheeled tractors--Three-point linkage--Part 4: Category 0 | GB 1593.4-1987 | 1987-9-1 |
Operating requirements for tractor power take-off and drawbars | GB/T 6961-1986 | 1987-7-1 |
Power take-off for agricultural tractors | GB/T 1592-1986 | 1987-7-1 |
Measuring methods for agricultural machinery testing conditions; General rules | GB/T 5262-1985 | 1986-4-1 |
Test methods for agricultural trailers | GB/T 4331-1984 | 1985-2-1 |
Agricultural trailer | GB 4330-1984 | 1985-2-1 |