| Title |
Standard No. |
Implemented On |
| Metallic and other inorganic coatings—Chromate-free chemical conversion coatings on allumion and its alloys | GB/T 39495-2020 | 2021-10-1 |
| Metallic and other inorganic coatings—Phosphate conversion coating of metals | GB/T 11376-2020 | 2021-4-1 |
| Metallic coatings—Hot dip galvanized coatings on fabricated iron and steel articles—Specifications and test methods | GB/T 13912-2020 | 2021-4-1 |
| Thermal spraying- Procedures for the application of thermally sprayed coatings for engineering components | GB/T 19823-2020 | 2021-4-1 |
| Technical specification for anticorrosion of steel pipe and fitting lining with fluoroplastics | GB/T 37589-2019 | 2020-5-1 |
| Cathodic protection of buried grounding conduct | GB/T 37575-2019 | 2020-5-1 |
| Technical specification for anti-UV three-layer external fusion powder coating corrosion protection for steel pipe | GB/T 37594-2019 | 2020-5-1 |
| Cathodic protection of buried metallic gas storage device | GB/T 37576-2019 | 2020-5-1 |
| Anti-corrosion technical specification for marine steel structures by high velocity arc spraying | GB/T 37309-2019 | 2020-2-1 |
| Thermal spraying—Components with thermally sprayed coatings—Technicalsupply conditions | GB/T 37707-2019 | 2020-1-1 |
| General requirements for impressed current cathodic protection system of coastal structures | GB/T 17005-2019 | 2020-1-1 |
| Thermal spraying—Characterization and testing of thermally sprayed coatings | GB/T 37421-2019 | 2019-12-1 |
| Technology requirement of the anti--corrosion materials for desulfurization chimneys | GB/T 37187-2018 | 2019-11-1 |
| Technical specification for rehabilitation of pipeline corrosion prevention with resin | GB/T 37195-2018 | 2019-11-1 |
| Evaluation specification of anticorrosion engineering quality for desulfurization chimney | GB/T 37179-2018 | 2019-11-1 |
| Code for quality and technology of anticorrosive construction with furan resin | GB/T 35499-2017 | 2019-1-1 |
| Preparation of steel substrates before application of paints and related products―Specifications for metallic blast-cleaning abrasives―Part 2:Chilled-iron grit | GB/T 18838.2-2017 | 2018-7-1 |
| Preparation of steel substrates before application of paints and related products―Specifications for non-metallic blast-cleaning abrasives―Part 1:General introduction and classification | GB/T 17850.1-2017 | 2018-7-1 |
| Anti-corrosion technology of prestressed concrete cylinder pipe | GB/T 35490-2017 | 2018-7-1 |
| Application and evaluation of corrosion inhibitors in oil and gas fields | GB/T 35509-2017 | 2018-7-1 |
| Preparation of steel substrates before application of paints and related products―Specifications for non-metallic blast-cleaning abrasives―Part 5:Nickel refinery slag | GB/T 17850.5-2017 | 2018-7-1 |
| Preparation of steel substrates before application of paints and related products―Specifications for non-metallic blast-cleaning abrasives―Part 4:Coal furnace slag | GB/T 17850.4-2017 | 2018-7-1 |
| Regional cathodic protection within station | GB/T 35508-2017 | 2018-7-1 |
| Preparation of steel substrates before application of paints and related products―Specifications for non-metallic blast-cleaning abrasives―Part 7:Fused aluminium oxide | GB/T 17850.7-2017 | 2018-7-1 |
| Technical specification for sherardizing coatings on iron and steel articles | GB/T 35505-2017 | 2018-7-1 |
| Thermal spraying--Pre-treatment of surfaces of metallic parts and components | GB/T 11373-2017 | 2018-4-1 |
| Method for evaluation of cooling seawater treatment agents--Part 2: Determination of scale inhibition performance | GB/T 34550.2-2017 | 2018-1-1 |
| Method for evaluation of cooling seawater treatment agents--Part 3: Determination of inhibiting microbes performance | GB/T 34550.3-2017 | 2018-1-1 |
| Technical specification for application of reinforced concrete anti-corrosion inhibitor | GB/T 33803-2017 | 2017-12-1 |
| Technical specification for cathodic protection of steel well casings | GB/T 33791-2017 | 2017-12-1 |
| Cathodicprotection-MMO/Ti flexible anode | GB/T 33637-2017 | 2017-12-1 |
| Technical specification of cathodic protection | GB/T 33378-2016 | 2017-7-1 |
| Specification of Franklinism Powder Spraying Coating for Windows and Doors of Profiled Aluminum Alloy | JG/T 496-2016 | 2016-12-1 |
| Specification of Franklinism Powder Spraying Coating for Steel Windows and Doors | JG/T 495-2016 | 2016-12-1 |
| Zinc coatings―Guidelines and recommendations for the protection against corrosion of iron and steel in structures―Part 2:Hot dip galvanizing | GB/T 19355.2-2016 | 2016-9-1 |
| Zinc coatings―Guidelines and recommendations for the protection against corrosion of iron and steel in structures―Part 1:General principles of design and corrosion resistance | GB/T 19355.1-2016 | 2016-9-1 |
| Zinc coatings―Guidelines and recommendations for the protectionagainst corrosion of iron and steel in structures―Part 3:Sherardizing | GB/T 19355.3-2016 | 2016-9-1 |
| Covering anticorrosion technology of oxiditive polymerization for steel structures | GB/T 32120-2015 | 2016-5-1 |
| Covering anticorrosion technology of multilayer petrolatum for marine steel structures | GB/T 32119-2015 | 2016-5-1 |
| Anti-corrosion technical specification for liquid fluorubber coated FGD chimney | GB/T 31819-2015 | 2016-2-1 |
| Metallic coatings―Physical vapour-deposited coatings of aluminium―Specification and test methods | GB/T 31566-2015 | 2016-1-1 |
| Thermal spraying―Determination of the deposition efficiency for thermal spraying | GB/T 31564-2015 | 2016-1-1 |
| Standard test method for determination of crystallite size of ZrO2 coatings by Scherrer equation | GB/T 31568-2015 | 2016-1-1 |
| Metallic and other inorganic coatings―Surface treatment,metallic and other inorganic coatings―Vocabulary | GB/T 3138-2015 | 2016-1-1 |
| Metallic coatings―Measurement of coating thickness―Scanning electron microscope method | GB/T 31563-2015 | 2016-1-1 |
| Non-magnetic metallic coatings on metallic and non-metallic basismaterials―Measurement of coating thickness―Phase-sensitive eddy-current method | GB/T 31554-2015 | 2016-1-1 |
| Vitreous ang porcelain enamels―Determination of the edge covering on enamelled steel plate to be used in heat exchangers | GB/T 31565-2015 | 2016-1-1 |
| Preparation of steel substrates before application of paints and related products―Specifications for metallic blast-cleaning abrasives―Part 5:Steel cut wire shot | GB/T 18838.5-2015 | 2015-12-1 |
| Standard test method for cathodic disbonding of pipeline coatings subjected to elevated temperatures | GB/T 31405-2015 | 2015-10-1 |
| Technical specification for anticorrosion operation of seawater circulation system in nuclear power plant | GB/T 31404-2015 | 2015-10-1 |
| Specification for steel component anticorrosion of highway engineering | GB/T 18226-2015 | 2015-8-1 |
| Anti-corrosion painting of solvent-free liquid epoxy coating | GB/T 31361-2015 | 2015-7-1 |
| Test method of operability of petrolatum tape at low temperature | GB/T 30650-2014 | 2015-7-1 |
| Specification of cold-applied petrolatum tape coatings for steel pipelines | GB/T 30788-2014 | 2014-12-1 |
| anode cathodic protection for seawater cooling system in coastal power station station | GB/T 16166-2013 | 2014-5-1 |
| Preparation of steel substrates before application of paints and related products―Surface roughness characteristics of blast-cleaned substrates―Part 4:Method for the calibration of ISO surface profile comparator and for the determination of surface prof | GB/T 13288.4-2013 | 2013-12-1 |
| Preparation of steel substrates before application of paints and related products—Visual assessment of surface cleanliness—Part 4:Initial surface conditions,preparation grades and flash rust grades in connection with high-pressure water jetting | GB/T 8923.4-2013 | 2013-12-1 |
| Coloring of stainless steel by Oxidation—Specification and test methods | GB/T 29036-2012 | 2013-10-1 |
| Thermal spraying—Coatings for protection against corrosion and oxidation at elevated temperatures | GB/T 29037-2012 | 2013-10-1 |
| Metallic and other inorganic coatings—Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement | GB/T 19349-2012 | 2013-10-1 |
| Metallic and other inorganic coatings—Post-coating treatments of iron or steel to reduce the risk of hydrogen embrittlement | GB/T 19350-2012 | 2013-10-1 |
| Corrosion tests in artificial atmospheres—Salt spray tests | GB/T 10125-2012 | 2013-10-1 |
| Thermal spraying coating—Nondestructive methods for measurement of thickness | GB/T 11374-2012 | 2013-3-1 |
| Thermal spraying - Metallic and other inorganic coatings - Zinc,aluminium and their alloys | GB/T 9793-2012 | 2013-3-1 |
| Steel structure protection general requirements of coatings | GB/T 28699-2012 | 2013-3-1 |
| Metallic and other inorganic coatings - Electroplated coatings of cadmium with supplementary treatments on iron or steel | GB/T 13346-2012 | 2013-3-1 |
| Cathodic protection for buried prestressed concrete cylinder pipelines | GB/T 28725-2012 | 2013-2-1 |
| Cathodic protection of reinforcing steel in atmospherically exposed concrete structures | GB/T 28721-2012 | 2013-2-1 |
| Metallic and other inorganic coatings—Electroplated coatings of zinc with supplementary treatments on iron or steel | GB/T 9799-2011 | 2012-10-1 |
| Preparation of steel substrates before application of paints and related products—Tests for the assessment of surface cleanliness—Part 6:Extraction of soluble contaminants for analysis—The Bresle method | GB/T 18570.6-2011 | 2012-10-1 |
| Preparation of steel substrates before application of paints and related products—Specifications for non-metallic blast-cleaning abrasives—Part 6:Iron furnace slag | GB/T 17850.6-2011 | 2012-10-1 |
| Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated s | GB/T 8923.1-2011 | 2012-10-1 |
| Preparation of steel substrates before application of paints and related products—Specifications for non-metallic blast-cleaning abrasives—Part 11:Special type grit of steel slag | GB/T 17850.11-2011 | 2012-6-1 |
| Specification of zinc-aluminium flake coatings | GB/T 26110-2010 | 2011-10-1 |
| Test of aqueous protective fluids for rust preventing ability—Electrochemical measurement with wire beam electrode | GB/T 26109-2010 | 2011-10-1 |
| Mechanically deposited coatings of zinc—Specification and test methods | GB/T 26106-2010 | 2011-10-1 |
| Metallic and other inorganic coatings—Test for residual embrittlement in both metallic-coated and uncoated externally-threaded articles and rods—Inclined wedge method | GB/T 26107-2010 | 2011-10-1 |
| Test of rust preventive oil for rust preventing ability—Electrochemical measurement with wire beam electrode | GB/T 26105-2010 | 2011-10-1 |
| Trivalent chromium electroplating specification | GB/T 26108-2010 | 2011-10-1 |
| Anti-corrosive painting of fusion bonded epoxy coating powders | GB/T 18593-2010 | 2010-12-31 |
| Surface treatment solution—Determination of metal element contents—Inductively coupled plasma atomic emission spectrometric method | GB/T 24916-2010 | 2010-12-31 |
| Ductile iron pipes and fittings—Polyurethane coatings | GB/T 24596-2009 | 2010-5-1 |
| Ductile iron pipes and fittings—Cement mortar lining | GB/T 17457-2009 | 2010-5-1 |
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2: Laboratory determination of chloride on | GB/T 18570.2-2009 | 2009-11-1 |
| Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 3: Preparation grades of welds edges and other area | GB/T 8923.3-2009 | 2009-11-1 |
| Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calib | GB/T 13288.3-2009 | 2009-11-1 |
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 11: Field method for the turbidimetric de | GB/T 18570.11-2009 | 2009-11-1 |
| Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 5: Replica tape method | GB/T 13288.5-2009 | 2009-11-1 |
| Glossary of Painting Terms | GB/T 8264-2008 | 2009-10-1 |
| Representation of coating | GB/T 4054-2008 | 2009-10-1 |
| Technical requirements of quality control for metal parts to be coated | GB/T 12611-2008 | 2009-2-1 |
| Designation for metallic coating and chemical treatment | GB/T 13911-2008 | 2009-2-1 |
| Metallic coatings—Electroplated coatings of chromium for engineering purposes | GB/T 11379-2008 | 2009-1-1 |
| Metallic and other non-organic coatings - Corrodkote corrosion test (CORR test) | GB/T 6465-2008 | 2009-1-1 |
| Metallic coatings - Hot dip galvanized coatings on ferrous materials - Gravimetric determination of the mass per unit area | GB/T 13825-2008 | 2009-1-1 |
| Metallic and other non-organic coatings—Sulfur dioxide test with general condensation of moisture | GB/T 9789-2008 | 2009-1-1 |
| Metallic coatings—Electroplated coatings of nickel for engineering purposes | GB/T 12332-2008 | 2009-1-1 |
| Metallic coatings - Autocatalytic (Electroless) nickel-phosphorus alloy coatings - Specification and test methods | GB/T 13913-2008 | 2009-1-1 |
| Electrodeposited chromium coatings—Electrolytic corrosion testing(EC test) | GB/T 6466-2008 | 2009-1-1 |
| Automotive spray booth | JT/T 324-2008 | 2008-12-1 |
| Surface coloring for stainless steel | JB/T 10915-2008 | 2008-11-1 |
| Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 4: Low-carbon cast-steel shot | GB/T 18838.4-2008 | 2008-9-1 |
| Preparation of steel substrates before application of paints and related products-Surface roughness characteristics of blast-cleaned substrates - Part 1: Specifications and definitio | GB/T 13288.1-2008 | 2008-9-1 |
| Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness - Part 12: Field method for the titrimetric determination of water-soluble ferrous ions | GB/T 18570.12-2008 | 2008-9-1 |
| Preparation of steel substrates before application of paints and related products-Visual assessment of surface cleanliness - Part 2: Preparation grades of praviously coated steel subs | GB/T 8923.2-2008 | 2008-9-1 |
| Preparation of steel substrates before application of paints and related products-Specifications for metallic blast-cleaning abrasives - Part 3: High-carbon cast-steel shot and grit | GB/T 18838.3-2008 | 2008-9-1 |
| Specification of spray coatings for sink roll and stabilizing roll | JB/T 10621-2006 | 2007-3-1 |
| Metallic coatings electroplated coatings of copper-tin alloys | JB/T 10620-2006 | 2007-3-1 |
| Free chromate Zn-Al flake coatings specification | JB/T 10619-2006 | 2007-3-1 |
| Zinc coatings for steel wire | YB/T 5357-2006 | 2006-10-11 |
| Chemical conversion coatings -- Rinsed and non-rinsed chromate conversion coatings on aluminium alloys | JB/T 10581-2006 | 2006-10-11 |
| Designation of thermal spraying coatings | JB/T 10580-2006 | 2006-10-11 |
| Standard practice for applying statistics of corrosion data | JB/T 10579-2006 | 2006-10-11 |
| Test methods for hydrogen embrittlement evaluation of plating processes Part 2: HYdrogen detection instrument method | HB 5067.2-2005 | 2006-5-1 |
| Test method for hydrogen embrittlement evaluation of plating processes - Part 1:Mechanical method | HB 5067.1-2005 | 2006-5-1 |
| Preparation of steel substrates before application of paints and related products—Tests for the assessment of surface cleanliness—Part8: Field method for the conductometric determination of water-soluble salts | GB/T 18570.9-2005 | 2006-4-1 |
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 10: Field method for the titrimetric deter | GB/T 18570.10-2005 | 2006-4-1 |
| GB/T 2001 8-2005 Metallic and non-metallic coatings - Measurements of thickness - Beta backscatter methods | GB/T 20018-2005 | 2006-4-1 |
| Preparation of steel substrates before application of paints and related products—Tests for the assessment of surface cleanliness—Part5: Measurement of chloride on surfaces prepared for painting(ion detection tube method) | GB/T 18570.5-2005 | 2006-4-1 |
| Metallic and other inorganic coatings-Genenal rules for corrosion tests applicable for storage conditions | GB/T 11377-2005 | 2006-4-1 |
| GB/T 2001 6-2005 Metallic and other inorganic coatings - Electropolishing as a means of smoothing and passivating stainless steel | GB/T 2001 6-2005 | 2006-4-1 |
| costings-Electrodeposited coatings of nickel | GB/T 9798-2005 | 2006-4-1 |
| Metallic coatings-Measurement of coating thickness-X-ray spectrometric methods | GB/T 16921-2005 | 2006-4-1 |
| GB/T 2001 9-2005 Thermal spraying - Acceptance inspection of thermal spraying equipment | GB/T 2001 9-2005 | 2006-4-1 |
| Preparation of steel substrates before application of paints and related products—Tests for the assessment of surface cleanliness—Part3:Assessment of dust on steel surface prepared for painting(pressure-sensitive tape method) | GB/T 18570.3-2005 | 2006-4-1 |
| Metallic coatings -- Measurement of coating thickness -- Coulometric method by anodic dissolution | GB/T 4955-2005 | 2006-4-1 |
| Electrodeposited metallic coatings and related finishes - Sampling procedures for inspection by attributes | GB/T 12609-2005 | 2006-4-1 |
| Metallic coatings-Electroplated coatings of nickel plus chromium and of copper plus nickel plus chromium | GB/T 9797-2005 | 2006-4-1 |
| Preparation of steel substrates before application of paints and related products—Test methods for metallic blast-cleaning abrasives—Part5:Determination of percentage defective particles and of microstructure | GB/T 19816.5-2005 | 2006-4-1 |
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 8: Field method for the refractometric dete | GB/T 18570.8-2005 | 2006-4-1 |
| Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part7 : Determination of moisture | GB/T 19816.7-2005 | 2006-4-1 |
| Metallic and other inorganic coatings—Measurement of mass per unit area—Review of gravimetric and chemical analysis methods | GB/T 20017-2005 | 2006-4-1 |
| Metallic and other inorganic coatings—Automated controlled shot-peening of metallic articles prior to nickel,autocatalytic nickel or chromium plating,or as a final finish | GB/T 20015-2005 | 2006-4-1 |
| Preparation of steel substrates before application of paints and related products—Test methods for metallic blast-cleaning abrasives—Part6:Determination of foreign matter | GB/T 19816.6-2005 | 2006-4-1 |
| Series of marks for plating and chemical covering and plating thickness (on trial) | HB 899-1966 | 2006-3-1 |
| Technical conditions of addition agent for bright nickel plating | JB/T 7508-2005 | 2006-2-1 |
| Standard test method for simultaneous thickness and electrochemical potential determination of individual layers multilayer nickel deposit | JB/T 10534-2005 | 2006-1-1 |
| Anti-rust properties test of aqueous protective fluids—Electrochemical measurement with wire beam electrode | JB/T 10527-2005 | 2006-1-1 |
| Anti-rust properties test of rust preventive oil - Electrochemical measurement with wire beam electrode | JB/T 10528-2005 | 2006-1-1 |
| Metallic and oxide coatings-Measurement of coating inckness-Microscopical method | GB/T 6462-2005 | 2005-12-1 |
| Thermal spraying-Approval testing of thermal sprayers | GB/T 19824-2005 | 2005-12-1 |
| Metallic coatings - Electroplated coatings of nickel plus chromium on plastics materials | GB/T 12600-2005 | 2005-12-1 |
| Thermal spraying procedures for the application of thermally sprayed coating for engineering components | GB/T 19823-2005 | 2005-12-1 |
| Metallic coatings - Measurement of costing thickness-Profilometric method | GB/T 11378-2005 | 2005-12-1 |
| Metallic coatings on metallic substrates?Electrodeposited and chemically deposited coatings?Revies of methods available for testing adhesion | GB/T 5270-2005 | 2005-12-1 |
| General specification for multifunctional solution of iron and steel surface treatment | GB/T 12612-2005 | 2005-12-1 |
| Specification for hand anodic oxidation coation on aluminium and its alloy | GB/T 19822-2005 | 2005-12-1 |
| Metallic and other inorganic coatings-Review of methods of measurement of thickness | GB/T 6463-2005 | 2005-12-1 |
| Preparation of steel substrates before application of paints and related products－ Test methods for metallic blast-cleaning abrasives－ Part1: Sampling | GB/T 19816.1-2005 | 2005-11-1 |
| Preparation of steel substrates before application of paints and related products－ Test methods for metallic blast-cleaning abrasives－ Part2: Determination of particle size distribution | GB/T 19816.2-2005 | 2005-11-1 |
| Preparation of steel substrates before application of paints and related products－ Test methods for metallic blast-cleaning abrasives－ Part 3: Determination of hardness | GB/T 19816.3-2005 | 2005-11-1 |
| Preparation of steel substrates before application of paints and related products － Test methods for metallic blast-cleaning abrasives － Part 4 : Determination of apparent density | GB/T 19816.4-2005 | 2005-11-1 |
| Spray booth | JB/T 10413-2005 | 2005-9-1 |
| Metallic coatings electroplated coatings of nickel for low-stressed | SJ 20912-2004 | 2004-12-30 |
| General specification for powder spraying coating | SJ 20910-2004 | 2004-12-30 |
| Testing method for the bonding strength for the coating made by detonation-gun spraying | HB 7751-2004 | 2004-12-1 |
| Specification of anti - oxidizing coatings at high - temperature for machineries | JB/T 10458-2004 | 2004-11-1 |
| Methods for analysis of plating lead solutions -- Part 1: Determination of lead oxide content by EDTA volumetric method | HB/Z 5096.1-2004 | 2004-6-1 |
| Methods for analysis of cyaniding plating brass solutions -- Part 3: Determination of sodium carbonate content by potentiometric titrimetric method | HB/Z 5095.3-2004 | 2004-6-1 |
| Methods for analysis of cyaniding plating brass solutions -- Part 1: Continual determination of copper (II) cyanate and zinc oxide content by EDTA volumetric method | HB/Z 5095.1-2004 | 2004-6-1 |
| Methods for analysis of plating black nickel solutions-Part 6:Determination of boric acid content by potentiometric titrimetric method | HB/Z 5089.6-2004 | 2004-6-1 |
| Methods for analysis of plating black nickel solutions-Part 2:Continual determination of nickel sulfate and zinc sulfate content by magnesium sulfate back titrimetric EDTA volumetric method | HB/Z 5089.2-2004 | 2004-6-1 |
| Methods for analysis of cyaniding plating brass solutions -- Part 2: Determination of free sodium cyanate content by potentiometric titrimetric method | HB/Z 5095.2-2004 | 2004-6-1 |
| Methods for analysis of plating black nickel solutions-Part 3:Continual determination of nickel sulfate and zinc sulfate content by EDTA compleximetric method | HB/Z 5089.3-2004 | 2004-6-1 |
| Process and quality inspection for electroless nickel plating | HB/Z 5071-2004 | 2004-6-1 |
| Methods for analysis of acid plating tin solutions -- Part 3: Determination of lead content by atomic absorption spectrometric method | HB/Z 5094.3-2004 | 2004-6-1 |
| Methods for analysis of acid plating copper solutions part 2:Determination of copper sulfate content by potentiometric titrimetric method | HB/Z 5087.2-2004 | 2004-6-1 |
| Methods for analysis of acid plating tin solutions -- Part 4: Determination of copper content by atomic absorption spectrometric method | HB/Z 5094.4-2004 | 2004-6-1 |
| Methods for analysis of acid plating tin solutions -- Part 1: Determination of tin (II) sulfate content by potentiometric titrimetric method | HB/Z 5094.1-2004 | 2004-6-1 |
| Methods for analysis of acid plating copper solutions part 3:Determination of sulphuric acid content by potentiometric titrimetric method | HB/Z 5087.3-2004 | 2004-6-1 |
| Methods for analysis of acid plating copper solutions part 5:Determination of nickel sulfate content by atomic absorption spectrometric method | HB/Z 5087.5-2004 | 2004-6-1 |
| Methods for analysis of plating black nickel solutions-Part 5:Determination of ammonium thiocyanate content by potentiometric titrimetric method | HB/Z 5089.5-2004 | 2004-6-1 |
| Methods for analysis of acid plating tin solutions -- Part 2: Determination of free sulphuric acid content by potentiometric titrimetric method | HB/Z 5094.2-2004 | 2004-6-1 |
| Methods for analysis of acid plating copper solutions part 4:Determination of iron content by atomic absorption spectrometric method | HB/Z 5087.4-2004 | 2004-6-1 |
| Methods for analysis of plating black nickel solutions-Part 4:Determination of sodium sulfate content by precipitation titrimetric method | HB/Z 5089.4-2004 | 2004-6-1 |
| Methods for analysis of acid plating copper solutions | HB/Z 5087.1-2004 | 2004-6-1 |
| Methods for analysis of acid plating copper solutions part 7:Determination of antimony content by atomic absorption spectrometric method | HB/Z 5087.7-2004 | 2004-6-1 |
| Methods for analysis of plating black nickel solutions | HB/Z 5089.1-2004 | 2004-6-1 |
| Methods for analysis of acid plating copper solutions part 6:Determination of arsenic content by spectrophotometric method | HB/Z 5087.6-2004 | 2004-6-1 |
| Methods for analysis of plating lead solutions -- Part 2: Determination of free fluorboric acid content by potentiometric titrimetric method | HB/Z 5096.2-2004 | 2004-6-1 |
| Thermal spraying—Quality requirements of thermally sprayed structures—Part 1:Guidance for selection and use | GB/T 19352.1-2003 | 2004-5-1 |
| Protection against corrosion of iron and steel in structures―Zineand aluminium coatings―Guidelines | GB/T 19355-2003 | 2004-5-1 |
| Thermal spraying—Wires,rods and cords for flame and arc spraying—Classification and technical supply condition | GB/T 12608-2003 | 2004-5-1 |
| Non-conductive coatings on non-magnetic basis metals—Measurement of coating thickness—Eddy current | GB/T 4957-2003 | 2004-5-1 |
| conversion coatings on zine, cadmium, aluminium-zine alloys and zinc - Aluminium alloys - Test methods | GB/T 9791-2003 | 2004-5-1 |
| Metallic coating - Determination of porosity in gold coatings on metal substrates - Nitric acid vapour test | GB/T 19351-2003 | 2004-5-1 |
| Designation of thermal spraying coatings | GB/T 12607-2003 | 2004-5-1 |
| Thermal spraying—Quality requirements of thermally sprayed structures—Part 2:Comprehensive quality requirements | GB/T 19352.2-2003 | 2004-5-1 |
| Vitreous and porcelain enamels—Corrosion tests in closed systems | GB/T 19353-2003 | 2004-5-1 |
| Thermal spraying—Quality requirements of thermally sprayed structures—Part 4:Elementary quality requirements | GB/T 19352.4-2003 | 2004-5-1 |
| Thermal spraying - Quality requirements of thermally sprayed structure - Part 3: STANDARD quality requirements | GB/T 19352.3-2003 | 2004-5-1 |
| coatings on metallic materials - Determination of coating mass per unit area - Gravimetric methods | GB/T 9792-2003 | 2004-5-1 |
| Oon-magnetic coatings on magnetic substrates?Measurement of coating thickness?Magnetic method | GB/T 4956-2003 | 2004-5-1 |
| Vitreous and porcelain enamels for aluminium - Determination of the adhesion of enamels on aluminium under the action of electrolytic solution(spall test) | GB/T 19354-2003 | 2004-5-1 |
| Thermal spraying - Powders - Composition and technical supply conditions | GB/T 19356-2003 | 2004-5-1 |
| Treatment and painting of electronic equipment | SJ 20890-2003 | 2004-3-1 |
| Specification for autocatalytic plating of nickel-phosphorous alloy coatings | SJ 20891-2003 | 2004-3-1 |
| Metallic coatings--Electroplated coatings of tin--Specification and test methods | GB/T 12599-2002 | 2003-4-4 |
| General technical conditions for painting equipment Part 3: Coating | JB/T 10394.3-2002 | 2003-4-1 |
| Methods for corrosion testing of metallic and other inorganic coatings on mtallic substrates--Rating of test speciments and manufactured articles subjected to corrosion tests | GB/T 6461-2002 | 2003-4-1 |
| General technical conditions for painting equipment Part 1:Fabricating parts | JB/T 10394.1-2002 | 2003-4-1 |
| General technical conditions for painting equipment Part 4:Installation | JB/T 10394.4-2002 | 2003-4-1 |
| General technical conditions for painting equipment Part 2:Weldment | JB/T 10394.2-2002 | 2003-4-1 |
| Preparation of steel substrates before application of paints and related products - Surface preparation methods - General principles | GB/T 18839.1-2002 | 2003-3-1 |
| Preparation of steel substrates before application of paints and related products - Surface preparation methods - Abrasive blast-cleaning | GB/T 18839.2-2002 | 2003-3-1 |
| Specification for gold [Ⅰ] potassium cyanide for electroplating | SJ 20846-2002 | 2003-3-1 |
| Preparation of steel substrates before application of paints and related products - Surface preparation methods - Hand-and power-tool cleaning | GB/T 18839.3-2002 | 2003-3-1 |
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - General introduction and classification | GB/T 17850.1-2002 | 2003-3-1 |
| Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning avrasives - General introduction and classification | GB/T 18838.1-2002 | 2003-3-1 |
| Process and quality inspection for titanium and titanium alloy anodizing | HB/Z 347-2002 | 2003-2-1 |
| Thermal spraying--Terminology,classification | GB/T 18719-2002 | 2002-12-1 |
| Technical conditions of addition agent for bright zinc plating | JB/T 10339-2002 | 2002-12-1 |
| Thermal spraying--Spraying and fusing of self-fluxing alloys | GB/T 16744-2002 | 2002-12-1 |
| Metallic Coatings-Hot Dip Galvanized Coatings on Fabricated Iron | GB/T 13912-2002 | 2002-12-1 |
| Chemical conversion coatings - Black oxide coating on iron and steel- Specification and test methods | GB/T 15519-2002 | 2002-12-1 |
| Preparation of steel substrates before application of paints--Tests for the assessment of surface cleanliness--Laboratory determination of chloride on cleaned surfaces | GB/T 18570.2-2001 | 2002-8-1 |
| Laser surface hardening of iron and ateel parts | GB/T 18683-2002 | 2002-8-1 |
| Specifications of physical vapour deposition TiN films | GB/T 18682-2002 | 2002-8-1 |
| Technical standard of polyethene coating for buried steel pipeline | SY/T 0413-2002 | 2002-8-1 |
| Internal coating of line pipe for non-corrosive gas transmission service | SY/T 6530-2002 | 2002-8-1 |
| Thermal spraying-Low pressure plasma spraying Ni-CO-Cr-Al-Y - Ta alloy coating | GB/T 18681-2002 | 2002-8-1 |
| Specifications of Zinc/Chromate coatings | GB/T 18684-2002 | 2002-8-1 |
| Preparation of steel substrates before application of paints and related products--Tests for the assessment of surface cleanliness--Guidance on the estimation of the probability of condensation prior to paint application | GB/T 18570.4-2001 | 2002-8-1 |
| Specifications for phosphating treatment of iron and steel parts before painting | GB/T 6807-2001 | 2002-6-1 |
| Metallic and other inorganic coatings - Definitions and conventions concerning the measurement of thickness | GB/T 12334-2001 | 2002-6-1 |
| Anti-corrosive painting of fusion bonded epoxy coating powders | GB/T 18593-2001 | 2002-6-1 |
| Metallic coating - Hot dipped aluminum coatings on ferrous articles - Specification | GB/T 18592-2001 | 2002-6-1 |
| Finishes for electronic equipment | SJ 20817-2002 | 2002-5-1 |
| Metal plating and chemical treatment for electronic equipment | SJ 20818-2002 | 2002-5-1 |
| Specification for chemical conversion on aluminum and aluminum alloys | SJ 20813-2002 | 2002-5-1 |
| Anti-corrosive Primer for Railway Locomotive and Vehicle | TBT 2260-2001 | 2001-12-1 |
| Electyostatic powder coating equipment | JB/T 10240-2001 | 2001-10-1 |
| Metallic coatings - Decorative multicolours composite electyoplated coatings | JB/T 10241-2001 | 2001-10-1 |
| Standard test method for water penetration into pipeline coatings | SY/T 0064-2000 | 2001-6-1 |
| Standard test method for penetration resistance of pipeline coatings(Blunt rod) | SY/T 0062-2000 | 2001-6-1 |
| Technical standard of liquid epoxy internal coating for steel pipeline | SY/T 0457-2000 | 2001-6-1 |
| Standard test method for abrasion resistance of pipeline coatings | SY/T 0065-2000 | 2001-6-1 |
| Fluorocarbon coatings on architectural aluminum extrusions and panels | JG/T 133-2000 | 2001-5-1 |
| Moisture Proofing，fungus Proofing and Salt Spray Proofing Coating Painting Process for Airborne Equipment | HB/Z 102-2000 | 2001-1-1 |
| Analysis Method for Alkaline Electrotinning Solution - Determination of Sodium Stannate Content with EDTA Volumetric Method | HB/Z 5093.1-2000 | 2001-1-1 |
| Analysis Method for Cyaniding Electrocoppering Solution - Determination of Sodium Hydroxide Content Through Potentiometric Titration | HB/Z 5086.3-2000 | 2001-1-1 |
| Analysis Method for Cyaniding Electrogalvanizing Solution - Determination of Sodium Hydroxide Content Through Potentiometric Titration | HB/Z 5084.2-2000 | 2001-1-1 |
| Analysis Method for Electrosilvering Solution - Determination of Potassium Cyanide Content in Electrosilvering Solution Through Potentiometric Titration | HB/Z 5099.2-2000 | 2001-1-1 |
| Aanalysis Method of ElectroChemical Degreasing and Chemical Degreasing Solution Determination of Sodium Silicate | HB/Z 5110.3-2000 | 2001-1-1 |
| Aanalysis Method of ElectroChemical Degreasing and Chemical Degreasing Solution - Determination of Total Alkalinity Through Potentiometric Titration | HB/Z 5110.1-2000 | 2001-1-1 |
| General rules of the selection for painting system of water paint | GB/T 18178-2000 | 2001-1-1 |
| Analysis Method for Cyaniding Electro-coppering Solution - Determination of Zinc and Cadmium Content with Atomic Absorption Spectrometry Method | HB/Z 5086.9-2000 | 2001-1-1 |
| Analysis Method for Electrosilvering Solution - Determination of Potassii Content in Electrosilvering Solution Through Potentiometric Titration | HB/Z 5099.3-2000 | 2001-1-1 |
| Analysis Method for Cyaniding Electrocoppering Solution - Determination of Sodium Cyanide (Free) | HB/Z 5086.2-2000 | 2001-1-1 |
| Analysis Method for Alkaline Electrotinning Solution - Determination of Divalent Stannum Content with Oxidation Reduction Titration Method | HB/Z 5093.4-2000 | 2001-1-1 |
| Analysis Method for Cyaniding Electrogalvanizing Solution - Determination of Iron Content with Atomic Absorption Spectrometry Method | HB/Z 5084.5-2000 | 2001-1-1 |
| Analysis Method for Cyaniding Electrogalvanizing Solution - Determination of Sodium Carbonate Content Through Potentiometric Titration | HB/Z 5084.3-2000 | 2001-1-1 |
| Analysis Method for Alkaline Electrotinning Solution - Determination of Copper Content with Atomic Absorption Spectrometry Method | HB/Z 5093.7-2000 | 2001-1-1 |
| Analysis Method for Cyaniding Electro-galvanizing Solution - Determination of Copper Content with Atomic Absorption Spectrometry Method | HB/Z 5084.6-2000 | 2001-1-1 |
| Analysis Method for Cyaniding Electrocoppering Solution - Determination of Sodium Carbonate Content Through Potentiometric Titration | HB/Z 5086.4-2000 | 2001-1-1 |
| Aanalysis Method of ElectroChemical Degreasing and Chemical Degreasing Solution - Determination of Sodium Hydroxide, Sodium Carbonate and Trisodium Phosphate Content Through Potentiometric Titration | HB/Z 5110.2-2000 | 2001-1-1 |
| Analysis Method of Silver Plating Solution - Determination of Potassium Hydroxide Content in Silver Plating Solution Through Potentiometric Titration | HB/Z 5099.5-2000 | 2001-1-1 |
| Analysis Method for Silver Plating Solution - Determination of Stibium Content in Silver Plating Solution with Atomic Absorption Spectrometry Method | HB/Z 5099.8-2000 | 2001-1-1 |
| Analysis Method for Cyaniding Electrogalvanizing Solution - Continuous Determination of Sodium Cyanide and Zinc Oxide Content Through Complexometric Titration | HB/Z 5084.1-2000 | 2001-1-1 |
| Analysis Method for Cyaniding Electrocoppering Solution - Determination of Silver Content with Atomic Absorption Spectrometry Method | HB/Z 5086.8-2000 | 2001-1-1 |
| Analysis Method for Electrosilvering Solution Determination of Silver Content in Electrosilvering Solution Through Potentiometric Titration | HB/Z 5099.1-2000 | 2001-1-1 |
| Aanalysis Method of ElectroChemical Degreasing and Chemical Degreasing Solution - Determination of Trisodium Phosphate Content with EDTA Volumetric Method | HB/Z 5110.4-2000 | 2001-1-1 |
| Analysis Method for Alkaline Electrotinning Solution - Qualitative Analysis of Divalent Stannum with Redox Process | HB/Z 5093.5-2000 | 2001-1-1 |
| Metallic coatings - Porosity tests - Humid sulfur (flowers of sulfur) test | GB/T 18179-2000 | 2001-1-1 |
| Analysis Method for ElectroChemical Polishing Solution - Determination of Chromic Oxide Content Through Potentiometric Titration | HB/Z 5105.2-2000 | 2001-1-1 |
| Analysis Method for Silver Plating Solution Determination of Potassium Carbonate Content in Hard Silver Solution Through Potentiometric Titration | HB/Z 5099.4-2000 | 2001-1-1 |
| Analysis Method for Alkaline Electrotinning Solution - Determination of Sodium Acetate Content Through Potentiometric Titration | HB/Z 5093.3-2000 | 2001-1-1 |
| Analysis Method for Silver Plating Solution - Determination of Iron and Copper Content in Silver Plating Solution with Atomic Absorption Spectrometry Method | HB/Z 5099.7-2000 | 2001-1-1 |
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Copper refinery slag | GB/T 17850.3-1999 | 2000-6-1 |
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives | GB/T 17849-1999 | 2000-6-1 |
| Metallic and other inorganic coatings--Thermal spraying--Safe practices | GB/T 11375-1999 | 2000-3-1 |
| Metallic and other inorganic coatings - Thermal spraying - Safe practices | GB 11375-1999 | 2000-3-1 |
| Papers for vapor phase rust preventive - Specification | JB/T 4051.1-1999 | 2000-1-1 |
| Oils for vapor phase rust preventive - Specification | JB/T 4050.1-1999 | 2000-1-1 |
| Test method for accelerated dew corrosion of rust preventive oils and greases | JB/T 3206-1999 | 2000-1-1 |
| Tyical processes for airless spraying | JB/T 9188-1999 | 2000-1-1 |
| Sherardizing of iron and steel articles | JB/T 5067-1999 | 2000-1-1 |
| Coatings of zinc mechanically deposited on iron and steel articles | JB/T 8928-1999 | 2000-1-1 |
| Equipment for thermal spraying - Compile method for classification and model number | JB/T 4108-1999 | 2000-1-1 |
| Oils for vapor phase rust preventive - Test method | JB/T 4050.2-1999 | 2000-1-1 |
| Test method for rust preventive of water base materials - Method of cast iron powder | JB/T 9189-1999 | 2000-1-1 |
| lasma enhancing electrochemical ceramiczing（PECC） coatings/organic coatings on aluminum and aluminum alloys | JB/T 8927-1999 | 2000-1-1 |
| Hot flow-off resistance of rust preventive oil films - Test method | JB/T 4216-1999 | 2000-1-1 |
| Papers for vapor phase rust preventive - Test method | JB/T 4051.2-1999 | 2000-1-1 |
| Test methods for flame spraying coating of molybdenum | JB/T 8926-1999 | 2000-1-1 |
| Standard test methods for holiday detection in pipeline coatings | SY/T 0063-1999 | 1999-12-1 |
| Technical standard of chlorosul fonated polyethylene external coating for steel tank | SY/T 0320-1998 | 1999-10-1 |
| Metallic coatings - Review of porosity tests | GB/T 17720-1999 | 1999-9-1 |
| Metallic coatings--Porosity tests --Ferroxyl test | GB/T 17721-1999 | 1999-9-1 |
| Analysis Method for Cyaniding Cadmium Electroplating Solution - Determination of Sodium Sulfate Content Through Volumetric Precipitation Method | HB/Z 5085.6-1999 | 1999-7-1 |
| Analysis Method for Cyaniding Cadmium Electroplating Solution - Determination of Sodium Hydroxide Content Through Potentiometric Titration | HB/Z 5085.3-1999 | 1999-7-1 |
| Analysis Method for Cyaniding Cadmium Electroplating Solution - Determination of Copper Content Through Atomic Absorption Spectrometry Method | HB/Z 5085.8-1999 | 1999-7-1 |
| Analysis Method for Cyaniding Cadmium Electroplating Solution - Determination of Cadmium Oxide Content with EDTA Volumetric Method | HB/Z 5085.1-1999 | 1999-7-1 |
| Corrosion tests in artificial atmospheres--General requirement | GB/T 14293-1998 | 1999-7-1 |
| Analysis Method for Cyaniding Cadmium Electroplating Solution - Determination of Sodium Cyanide Content Through Potentiometric Titration | HB/Z 5085.2-1999 | 1999-7-1 |
| Ductile iron pipes--Bitumen coating | GB/T 17459-1998 | 1999-7-1 |
| Analysis Method for Cyaniding Cadmium Electroplating Solution - Determination of Iron Content Through Atomic Absorption Spectrometry Method | HB/Z 5085.7-1999 | 1999-7-1 |
| Ductile iron pipes--Centrifugal cement mortar lining--Composition controls of freshly applied mortar | GB/T 17458-1998 | 1999-7-1 |
| Metallic coatings - Electroplated coatings of tin-nickel alloys | GB/T 17462-1998 | 1999-7-1 |
| Metallic coatings--Electroplated coatings of tin-lead alloys | GB/T 17461-1998 | 1999-7-1 |
| Chemical conversion coatings--Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys | GB/T 17460-1998 | 1999-7-1 |
| Analysis Method for Cyaniding Cadmium Electroplating Solution - the Determination Ofnickel Sulfate Content with EDTA Volumetric Method | HB/Z 5085.5-1999 | 1999-7-1 |
| Analysis Method for Cyaniding Cadmium Electroplating Solution - Determination of Sodium Carbonate Content Through Potentiometric Titration | HB/Z 5085.4-1999 | 1999-7-1 |
| Impressed current cathodic protection system for coastal structures | GB/T 17005-1997 | 1998-8-1 |
| Service Technical Regulation for Inhibitor of Rebar | YB/T 9231-1998 | 1998-7-1 |
| Specification of franklinism powder spraying coating for doors and saches of profiled aluminium alloy | JG/T 3045.1-1998 | 1998-6-1 |
| Specification of franklinism powder spraying coating for steel doors and saches | JG/T 3045.2-1998 | 1998-6-1 |
| Measurement of metallic coating thickness X-ray spectrometric methods | GB/T 16921-1997 | 1998-2-1 |
| Metallic coatings-Electroplated coatings of zinc on iron or steel | GB/T 9799-1997 | 1998-2-1 |
| Phosphate conversion coatings for metals | GB/T 11376-1997 | 1998-2-1 |
| Scratch Test Method for Adhesion between Vapor Plating Film and the Base | JB/T 8554-1997 | 1998-1-1 |
| Metallic coatings-Electrodeposited coatings of nickel plus chromium and of copper plus nickel plus chromium | GB/T 9797-1997 | 1998-1-1 |
| Metallic coatings-Electrodeposited coatings of nickel | GB/T 9798-1997 | 1998-1-1 |
| Metallic coatings-Test methods for electrodeposited gold and gold alloy coatings. Part 6: Determination of the presence of residual salts | GB/T 12305.6-1997 | 1998-1-1 |
| Corrosion tests in artificial atmospheres-Salt spray tests | GB/T 10125-1997 | 1998-1-1 |
| Metallic coatings-Test methods for electrodeposited silver and silver alloy coatings. Part 3: Determination of the presence of residual salts | GB/T 12307.3-1997 | 1998-1-1 |
| Thermal spraying--Self-fluxing alloy coatings | GB/T 16744-1997 | 1997-9-1 |
| Metallic coatings-Measurement of coating thickness-Coulometric method by anodic dissolution | GB/T 4955-1997 | 1997-9-1 |
| Test Method of Corrosion of Metal Coating and Organic Coating by Natural Seawater | JB/T 8424-1996 | 1997-7-1 |
| Specification for the Painting Work Technology of Steel Structure and Pipe | YB/T 9256-1996 | 1997-7-1 |
| Requirements of Readiness and Methods of Inspection and Assessment for Barrel Plating Equipment | SJ/T 31053-1994 | 1997-1-1 |
| Specification for Titanium Alloy Anodic Oxidation Process | QJ 2854-1996 | 1997-1-1 |
| Requirements of Readiness and Methods of Inspection and Assessment for Universal Electroplating Baths | SJ/T 31052-1994 | 1997-1-1 |
| Requirements of Readiness and Methods of Inspection and Assessment for Electroplating Production Lines | SJ/T 31050-1994 | 1997-1-1 |
| Technical Specification for Titanium Alloy Anodic Oxide Film | QJ 2853-1996 | 1996-12-31 |
| Analysis Method for Tin-zinc Alloy Plating Solution | QJ 2857-1996 | 1996-12-31 |
| Ion plating － Colour of golden TiN | GB/T 15827-1995 | 1996-8-1 |
| The chemical oxide coating for iron and steel | GB/T 15519-1995 | 1996-2-1 |
| Test Method for Electroplating Solution - Dispensability Test | JB/T 7704.4-1995 | 1996-1-1 |
| Test Method for Electroplating Solution - Hull Cell Test | JB/T 7704.1-1995 | 1996-1-1 |
| Test Method for Electroplating Solution - Cathode Current Efficiency Test | JB/T 7704.3-1995 | 1996-1-1 |
| Metal and Non-Organic Coatings on Metal Base - Saline Water Dropping Corrosion Resistance Test (SD Test) | JB/T 7702-1995 | 1996-1-1 |
| Test Method for Electroplating Solution - Covering Capacity Test | JB/T 7704.2-1995 | 1996-1-1 |
| Technical Specification for Hot Spraying Ceramic Coating | JB/T 7703-1995 | 1996-1-1 |
| Test Method for Thickness of Hard Film of Ion Plating - Ball Milling Method | JB/T 7707-1995 | 1996-1-1 |
| Test Method for Electroplating Solution - Leveling Test | JB/T 7704.5-1995 | 1996-1-1 |
| Test Method for Electroplating Solution - Determination of Polarization Curve | JB/T 7704.6-1995 | 1996-1-1 |
| General Specification for Protectiveness Plating and Coating of Satellite Structural Parts | QJ 2754-1995 | 1995-12-8 |
| Solution Analysis Method for Low Tin Bronze Coating | QJ 2736-1995 | 1995-10-26 |
| Process Specification for Low Tin Bronze Coating | QJ 2735-1995 | 1995-10-26 |
| Technical Specification for Electrostatic Spraying Equipment | JB/T 7504-1994 | 1995-10-1 |
| Thickness of Cross Section of Metal Coatings Scanning Electron Microscope Measuring Method | JB/T 7503-1994 | 1995-10-1 |
| General Technical Specification for Brush Plating | JB/T 7507-1994 | 1995-10-1 |
| Terminology of Ion Plating | JB/T 7505-1994 | 1995-10-1 |
| Quality Control for Metallic and Chemical Coating Process | HB 5335-1994 | 1995-1-1 |
| Test Method for Electrical Insulation Properties of Coating - Measurement of Dielectric Loss Tangent at Power Frequency, Audio Frequency and High Frequency | QJ 2220.5-1994 | 1994-10-27 |
| Test Method for Electrical Insulation Properties of Coating - Measurement of Relative Dielectric Constant at Power Frequency, Audio Frequency and High Frequency | QJ 2220.4-1994 | 1994-10-27 |
| Test Method for Thickness of Metallic Coating on Glasses Frame - X Fluorescent Spectrometry Method | QB/T 1912-1993 | 1994-8-1 |
| Surface Preparation before Coating. Acid Washing | JB/T 6978-1993 | 1994-7-1 |
| Surface Preparation Method for Aluminum and Aluminum Alloy before Electroplating | JB/T 6986-1993 | 1994-7-1 |
| Antirusting Pretreatment of Mechanical Products Technical Specification for Cleaning | JB/T 6977-1993 | 1994-7-1 |
| Wirebar Spray Coated Carbon Steels and Stainless Steels | JB/T 6974-1993 | 1994-7-1 |
| Requirements of Readiness and Methods of Inspection and Assessment for Electrostatic Spraying Production Line | SJ/T 31058-1994 | 1994-6-1 |
| Quality Control for Painting Process for Parts and Components and Complete Aircraft | HB 6733-1993 | 1994-3-1 |
| Quality Inspection for Silver Coating | HB 5051-1993 | 1994-3-1 |
| Quality Inspection for Insulated Anodic Oxide Film of Aluminium and Aluminium Alloy | HB 5058-1993 | 1994-3-1 |
| Quality Inspection for Anodic Oxide Film of Aluminium and Aluminium Alloy in Sulfuric Acid | HB 5055-1993 | 1994-3-1 |
| Insulation Anodic Oxidation Technology of Aluminium and Aluminium Alloy | HB/Z 5076-1993 | 1994-3-1 |
| Electroinning Technology | HB/Z 5073-1993 | 1994-3-1 |
| Electrosilvering Technology | HB/Z 5074-1993 | 1994-3-1 |
| Quality Inspection for Tin Coating | HB 5046-1993 | 1994-3-1 |
| Quality Inspection for Terne Metal Coating | HB 5049-1993 | 1994-3-1 |
| Quality Inspection for Rigid Anodic Oxide Film of Aluminium and Aluminium Alloy | HB 5057-1993 | 1994-3-1 |
| Metallic coatings－Determination of the mass for hot dip galvanized coatings on ferrous materials－Gravimetric method | GB/T 13825-1992 | 1993-10-1 |
| Autocatalytic nickel-phosphorus coating--Specification and test methods | GB/T 13913-1992 | 1993-10-1 |
| Metallic coatings-Hot dip galvanized coatings on fabricated ferrous products-Specification | GB/T 13912-1992 | 1993-10-1 |
| measurement of coating thickness for electrodeposited nickel coatings on magnetic and non - Magnetic substracts | GB/T 13744-1992 | 1993-8-1 |
| Gas Phase Rust-resistant Plastic Films Technical Conditions | JB/T 6067-1992 | 1993-7-1 |
| Titanium Nitride Coatings Metallographic Examination Method | JB/T 6075-1992 | 1993-7-1 |
| Metal Coating. Laboratory Complete Immersion Corrosion Test | JB/T 6073-1992 | 1993-7-1 |
| Quality Inspection for Zinc Coating | HB 5035-1992 | 1992-12-1 |
| Quality Inspection for Nickel Coat | HB 5038-1992 | 1992-12-1 |
| Electro Coppering Process | HB/Z 5069-1992 | 1992-12-1 |
| Electronickelling Process | HB/Z 5070-1992 | 1992-12-1 |
| Quality Inspection for Spongy Chromium Coating of Gas Cylinder | HB 5044-1992 | 1992-12-1 |
| Quality Inspection for Black Chromium Coating | HB 5045-1992 | 1992-12-1 |
| Quality Inspection for Spongy Chromium Coating of Piston Ring | HB 5043-1992 | 1992-12-1 |
| Quality Inspection for Hard Chromium and Milky White Chromium Coating | HB 5041-1992 | 1992-12-1 |
| Quality Inspection for Decorative Chromium Coating | HB 5042-1992 | 1992-12-1 |
| Chromium Electroplating Process | HB/Z 5072-1992 | 1992-12-1 |
| Quality Inspection for Copper Coat | HB 5037-1992 | 1992-12-1 |
| Quality Inspection for Cadmium Coating | HB 5036-1992 | 1992-12-1 |
| The rules for transliteration of Li geographical names into Han characters | CH 4002-1991 | 1992-5-1 |
| Anodizing of aluminum and aluminium alloys-Measurmeent of mean specific adrasion resistance of anodic oxidation coatings with an adrasive jet test apparatus | GB/T 12967.1-1991 | 1992-3-1 |
| Anodizing of aluminium and aluminium alloys-Copper accelerated acetic acid salt spray test for anodic oxide coatings (ASS test) | GB/T 12967.3-1991 | 1992-3-1 |
| Anodizing of aluminium and aluminium alloys-Determination of the fastness to ultraviolet light of coloured anodic oxide coatings | GB/T 12967.4-1991 | 1992-3-1 |
| Anodizing of aluminium and aluminium alloys-Measurement of wear resistance and wear index of anodic oxidation coatings with an abrasive wheel wear test apparatus | GB/T 12967.2-1991 | 1992-3-1 |
| Electrodeposited metallic coatings and related finishes-Sampling procedures for inspection by attributes | GB/T 12609-1990 | 1991-12-1 |
| Metallic coatings--Electroplated coatings of tin | GB/T 12599-1990 | 1991-12-1 |
| Technical requirements of quality control for metal parts to be coated | GB/T 12611-1990 | 1991-12-1 |
| Designation for the design of thermal spraying coatings | GB/T 12607-1990 | 1991-12-1 |
| Designation of the materials for thermal spraying coatings | GB/T 12608-1990 | 1991-12-1 |
| Chemical conversion film impregnation process for aluminium and aluminium alloy | HB/Z 193-1991 | 1991-10-1 |
| Method of Bonding Strength Test for Heat Spray Coating Layer | HB 5476-1991 | 1991-10-1 |
| General specification for multifunctional solution of steel and iron surface treatment | GB/T 12612-1990 | 1991-10-1 |
| Method of Tensile Strength Test for Heat Spray Coating Layer | HB 5475-1991 | 1991-10-1 |
| Specifications for structural adhesive joint aluminum alloy phosphoric acid anodizing process | HB/Z 197-1991 | 1991-10-1 |
| Platinum aluminum coating process | HB/Z 187-1991 | 1991-10-1 |
| Method of Shear Strength Test for Heat Spray Coating Layer | HB 5474-1991 | 1991-10-1 |
| Technical Condition of Paint Coating and Antirust for Cement Machinery | JC/T 402-1991 | 1991-8-1 |
| Inspection Standard for Platinum and Aluminum Coating | HB 5468-1991 | 1991-7-1 |
| Water Quality Specifications for Water used for Metal Plating and Chemical Coating Process | HB 5472-1991 | 1991-7-1 |
| Test Method for Breakdown Voltage of Aluminium and Aluminium Alloy Insulation Anodization Film | QJ 483-1990 | 1991-6-1 |
| Test Method for Color Changing Resistance of Copper and Copper Alloys Oxide Film | QJ 485-1990 | 1991-6-1 |
| Test Method for Metal Clad Sheet Porosity | QJ 480-1990 | 1991-6-1 |
| Test Method for Microhardness of Metal Clad Sheet | QJ 482-1990 | 1991-6-1 |
| Measuring Method for Metal Clad Sheet Thickness | QJ 478-1990 | 1991-6-1 |
| Test Method for Corrosion Resistance of Copper and Copper Alloys Passivating Film | QJ 486-1990 | 1991-6-1 |
| Test Method for Sulphide Color Changing Resistance of Silver Coating | QJ 484-1990 | 1991-6-1 |
| Test Method for Alternating Humid Heat Resistance of Metal Clad Sheet | QJ 481-1990 | 1991-6-1 |
| Test Method for Metal Clad Sheet Bonding Strength | QJ 479-1990 | 1991-6-1 |
| Metallic coatings--Electrodeposited gold and gold alloy coatings for engineering purposes | GB 12304-1990 | 1991-1-1 |
| Matallic coatings--Electrodeposited silver and silver alloy coatings for engineering purposes | GB 12306-1990 | 1991-1-1 |
| Standard practice for applying statistics to analysis of corrosion data | GB/T 12336-1990 | 1990-12-1 |
| Metallic coatings-Electroplated coatings of nickel for engineering purposes | GB 12332-1990 | 1990-12-1 |
| The rating of the test specimen after the metal coating layer on the bottom material is anodic coating | GB/T 12335-1990 | 1990-12-1 |
| Metallic and other inorganic coatings--Definitions and conventions concerning the measurement of thickness | GB 12334-1990 | 1990-12-1 |
| Metallic coatings--Electroplated coatings of copper for engineering purposes | GB 12333-1990 | 1990-12-1 |
| Metallic coatings-Electroplated coatings of chromium for engineering purposes | GB 11379-1989 | 1990-1-1 |
| Rust prevention terminology | GB 11372-1989 | 1990-1-1 |
| Metallic coatings-Measurement of coating thickness-profilometric method | GB/T 11378-1989 | 1990-1-1 |
| Metallic and other non-organic coatings-General rules for corrosion tests applicable for storage conditions | GB/T 11377-1989 | 1990-1-1 |
| The general principle of surface preparation of metallic substrate for thermal spraying | GB 11373-1989 | 1990-1-1 |
| Metallic and related coatings-Vickers and knoop microhardness tests | GB/T 9790-1988 | 1989-9-1 |
| Conversion coatings on metallic materials--Determination of coating mass per unit area--Gravimetric methods | GB 9792-1988 | 1989-9-1 |
| Metallic and other non-organic coatings-Sulfur dioxide test with general condensation of moisture | GB 9789-1988 | 1989-9-1 |
| Chromate conversion coatings on zinc and cadmium--Test methods | GB/T 9791-1988 | 1989-9-1 |
| Chromate conversion coatings on electroplated zinc and cadmium coatings | GB 9800-1988 | 1989-9-1 |
| Tinplate (or ECCS) coated with the epoxy phenolic type of lacquers | GB 8230-1987 | 1988-9-1 |
| Thermal spraying - Determiantion of tensile adhesive strength | GB/T 8642-2002 | 1988-8-1 |
| Glossary of painting terms | GB 8264-1987 | 1988-7-1 |
| Quality Inspection for Anodic Oxide Film of Chromic Acid for Aluminium and Aluminium Alloys | HB 5373-1987 | 1987-10-1 |
| Chromic Acid Anodizing Process for Aluminium and Aluminium Alloy | HB/Z 118-1987 | 1987-10-1 |
| Specification for phosphate treatment of iron and steel parts before painting | GB/T 6807-1986 | 1987-6-1 |
| Metallic and oxide coatings; Measurement of coating thickness; Microscopical method | GB 6462-1986 | 1987-5-1 |
| Metallic and other non-organic coatings; Review of methods of measurement of thickness | GB 6463-1986 | 1987-5-1 |
| Metallic and other non-organic coatings; Corrodokote corrosion test(CORR test) | GB 6465-1986 | 1987-5-1 |
| Metallic coatings--Coatings cathodic to the substrate--Rating of electro-plated test specimens subjected to corrosion tests | GB 6461-1986 | 1987-5-1 |
| Electrodeposited chromium coatings; Electrolytic corrosion testing (EC test) | GB 6466-1986 | 1987-5-1 |
| Adhesion testing method of the metal deposits for the light industrial products | GB 5933-1986 | 1986-12-1 |
