Code of China Chinese Classification Professional Classification ICS Classification Latest Value-added Services

Chinese National Standard List: Mathematics

Title Standard No. Implemented On
Selection and use of mathematical methods for calculating absorbed dose in radiation processing applicationsT/CIRA 4-2019
Statistical method of quality control in production process—Control charts—Part 5：Specialized control chartsGB/T 17989.5-20222022-10-1
Statistical methods in monitoring process capability and performance—Part 6:Process capability statistics for characteristics following a multivariate normal distributionGB/T 40681.6-20212022-5-1
Statistical methods in monitoring process capability and performance—Part 4:Process capability estimates and performance measuresGB/T 40681.4-20212022-5-1
Control charts—Part 4: Cumulative sum chartsGB/T 17989.4-20202020-10-1
Control charts—Part 2: Shewhart control chartsGB/T 17989.2-20202020-10-1
Control charts—Part 3: Acceptance control chartsGB/T 17989.3-20202020-10-1
Control charts—Part 1: General guidelinesGB/T 17989.1-20202020-10-1
Statistical interpretation of data—Detection and treatment of outliers in the sample from typeⅠextreme value distributionGB/T 6380-20192020-7-1
Statistical methods for use in proficiency testing by interlaboratory comparisonGB/T 28043-20192020-7-1
Sampling procedures for inspection by variables—Part 4:Procedures for assessment of declared quality levels for meanGB/T 6378.4-20182019-2-1
Capability of detection—Part 2:Methodology in the linear calibration caseGB/T 33260.2-20182019-1-1
Capability of detection—Part 4:Methodology for comparing the minimum detectable value with a given valueGB/T 33260.4-20182019-1-1
Capability of detection—Part 5:Methodology in the linear and nonlinear calibration casesGB/T 33260.5-20182019-1-1
Capability of detection—Part 3:Methodology for determination of the critical value for the response variable when no calibration data are usedGB/T 33260.3-20182019-1-1
Evaluation criteria for six sigma managementGB/T 36077-20182018-10-1
Implementation guide of random sampling for discrete itemsGB/Z 31233-20142015-4-15
Specification on Water-related Statistical Data CollectionSL 620-20132013-12-6
Network planning techniques—Part 1:General termsGB/T 13400.1-20122013-6-1
Sampling procedures for inspection by attributea-Part1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspectionGB/T 2828.1-20122013-2-15
Sampling inspection procedures for commodity applying to the case with prior information of qualityGB/T 28863-20122013-2-15
Accuracy(trueness and precision) of measurement methods and results - Part 3：Intermediate measures of the precision of a standard measurement methodGB/T 6379.3-20122013-2-15
Statistical methods for use in proficiency testing by interlaboratory comparisons GB/T 28043-20112012-2-1
Acceptance sampling procedures by attributes - Accept-zero sampling system based on credit principle for controlling outgoing qualityGB/T 26823-20112011-12-1
Sampling procedures for inspection by attributes—Part 5:System of sequential sampling plans indexed by acceptance quality limit(AQL)for lot-by-lot inspectionGB/T 2828.5-20112011-12-1
Quality control in laboratories evaluating validity of non-standard test method practice for a linear relationshipGB/T 27408-20102011-7-1
Quality control in laboratories applying statistical quality assurance and control charting techniques to evaluate analytical measurement system performanceGB/T 27407-20102011-7-1
Acceptance sampling plans and procedures for the inspection of bulk materialsGB/T 22555-20102011-4-1
Linear calibration using reference materialsGB/T 22554-20102011-4-1
Sampling procedures for inspection by attributes―Part 10:Introduction to the GB/T 2828 series of standards for sampling for inspection by attributesGB/T 2828.10-20102011-4-1
Guidance for the use of repeatability reproducibility and trueness estimates in measurement uncertainty estimationGB/Z 22553-20102010-12-1
Statistics—Vocabulary and symbols—Part 2:Applied statisticsGB/T 3358.2-20092010-2-1
Statistics—Vocabulary and symbols—Part 3:Design of experimentsGB/T 3358.3-20092010-2-1
Confidence limits of quantile and coefficient of variation for normal distributionGB/T 10094-20092010-2-1
Lower confidence limit of reliability for omplete sample from normal distributionGB/T 4885-20092010-2-1
Statistics—Vocabulary and symbols—Part 1:General statistical terms and terms used in probabilityGB/T 3358.1-20092010-2-1
Statistical interpretation of data - Determination of statistical tolerance intervalsGB/T 3359-20092010-2-1
Terms and symbols for fault treeGB/T 4888-20092009-12-1
Statistical interpretation of data - Multiple comparison for test resultsGB/T 10092-20092009-12-1
Probabilistic limit states design(Normal-Normal mode)GB/T 10093-20092009-12-1
Statistical interpretation of data - One-sided confidence lower limit of reliability for binomial distributionGB/T 4087-20092009-12-1
Statistical interpretation of data - Parameter estimation for gamma distribution (Pearson Ⅲ distribution)GB/T 8055-20092009-12-1
General rules for sampling inspection of bulk materials with uniform sizeGB/T 13732-20092009-12-1
Network planning techniques - Part 3: General process used in project managementGB/T 13400.3-20092009-11-1
Network planning techniques - Part 2: General rules for representation of network diagramGB/T 13400.2-20092009-11-1
Accuracy(trueness and precision) of measurement methods and results - Part 6: Use in practice of accuracy valuesGB/T 6379.6-20092009-9-1
Statistical interpretation of data Estimation and hypothesis test of parameter in binomial distributionGB/T 4088-20082009-1-1
Sampling procedures for inspection by attributes Part 11: Procedures for assessment of declared quality levels for small populationGB/T 2828.11-20082009-1-1
Choice of sample size for estimating the average quality of a lot or processGB/T 4891-20082009-1-1
Statistical interpretation of data - Detection and treatment of outliers in the normal sampleGB/T 4883-20082009-1-1
Generation of random numbers and procedures applied to sampling inspection for product quality GB/T 10111-20082009-1-1
Statistical interpretation of data - Techniques of estimation and tests relating to means and variancesGB/T 4889-20082009-1-1
Sampling procedures for inspection by attributes - Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspectionGB/T 2828.2-20082009-1-1
Guide to acceptance sampling inspectionGB/T 13393-20082009-1-1
Re-inspection and re-test procedures for assessment of declared quality levelsGB/T 16306-20082009-1-1
Sampling procedures for inspection by variables - Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single qualGB/T 6378.1-20082009-1-1
Statistical interpretation of data - Detection and treatment of outliers in the sample from exponential distribution GB/T 8056-20082009-1-1
Sequential sampling plans for inspection by attributes GB/T 8051-20082009-1-1
Statistical interpretation of data - Detection and treatment of outliers in the sample from typeⅠextreme value distributionGB/T 6380-20082009-1-1
Statistical interpretation of data Estimation and hypothesis test of parameter in Poisson distributionGB/T 4089-20082009-1-1
Sampling procedures and tables for small lot inspection by attributes for percent nonconforming itemsGB/T 13264-20082009-1-1
Sampling procedures for inspection by attributes - Part 3: Skip-lot sampling proceduresGB/T 2828.3-20082009-1-1
Single sampling procedures and tables for Inspection having desired operating Characteristics by variablesGB/T 8054-20082009-1-1
Sampling procedures for inspection by variables - Part 4: Procedures for assessment of declared quality levels for meanGB/T 6378.4-20082009-1-1
Sampling procedures for inspection by attributes - Part 4: Procedures for assessment of declared quality levelsGB/T 2828.4-20082009-1-1
Rules of rounding off for numerical values & expression and judgement of limiting valuesGB/T 8170-20082009-1-1
Single sampling procedures and tables for inspection having desired operating characteristics by attributes for percent nonconformingGB/T 13262-20082009-1-1
Accuracy(trueness and precision) of measurement methods and results -Part 5: Alternative methods for the determination of the precision of a standard measurement methodGB/T 6379.5-20062007-4-1
Accuracy (trueness and precision) of measurement methods and results - Part 4: Basic methods for the determination of the trueness of a standard measurement method GB/T 6379.4-20062007-4-1
Cumulative Sum charts - Guidance on quality control and data analysis using CUSUM techniquesGB/Z 4887-20062006-10-1
Standard practice for laboratory bias evaluation using single test result from standard materialSN/T 1492-20042005-4-1
Accuracy(trueness and precision) of measurement methods and results - Part 1: General principles and definitionsGB/T 6379.1-20042005-1-1
Accuracy (trueness and precision) ofmeasurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement methodGB/T 6379.2-20042005-1-1
Sampling procedures for inspection by attributea-Part1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspectionGB/T 2828.1-20032004-3-1
Sequential sampling procedures and tables for inspection by attributesGB/T 8051-20022003-1-1
Sampling procedures and tables for periodic inspection by attributes (Apply to inspection of process stability)GB/T 2829-20022003-1-1
Sampling procedures and charts for inspection by variables for percent nonconforming (Applied to inspection of successive lots or batches)GB/T 6378-20022003-1-1
Control charts for arithmetic average with warning limitsGB/T 4886-20022002-12-1
Single and multi - level continuous sampling procedures and tables for inspection by attributesGB/T 8052-20022002-12-1
Shewhart control chartsGB/T 4091-20012001-12-1
Statistical interpretation of data--Normality testsGB/T 4882-20012001-9-1
Control charts--General guide and introductionGB/T 17989-20002000-1-1
Interpretation of statistical data - Estimation of a medianGB/T 17560-19981999-7-1
Function represention of particle size distribution Power-functionGB/T 16742.1-19971997-9-1
Single sampling procedures and tables by attributes for product quality auditGB/T 14437-19971997-1-2
Procedures and the plan of sampling for repeat test or inspection in product quality auditGB/T 16306-19961996-11-1
Statistical sampling inspection method of weight and estimate of mean for import and export commodity in uniform packingSN/T 0510-19951996-5-1
Single sampling procedures and tables for inspection having desired operating characteristics by variables for mean valueGB/T 8054-19951996-1-1
Single sampling procedures and tables for product quality audit of small population by attributesGB/T 15482-19951996-1-1
Sampling procedures and tables for isolated lot inspection by attributesGB/T 15239-19941995-6-1
Methods of random sampling by utilizing electronic sampler of random numberGB/T 15500-19951995-3-1
Random Series Spectral Analysis MethodQJ 2673-19941995-1-1
Single sampling procedures and tables for product quality audit by variables for mean valueGB/T 14900-19941994-8-1
Terms for statistics Part Ⅱ:terms for statisticalquality controlGB/T 3358.2-19931994-5-1
Terms for statistics. Part Ⅰ: Terms for general statisticsGB/T 3358.1-19931994-5-1
Terms for statistics. Part Ⅲ: terms for experimentaldesignGB/T 3358.3-19931994-5-1
Lower confidence limit of normal probability within specified limitsGB/T 14438-19931994-1-1
Sampling procedures and tables for product quality audit(Apply to inspection by attributes for nonconformities per hundred units)GB/T 14162-19931993-10-1
General rules for sampling inspection of bulk materials with uniform sizeGB/T 13732-19921993-6-1
Rectifying sampling procedures and tables for inspections by attributesGB/T 13546-19921993-4-1
Guide for sampling inspectionGB/T 13393-19921992-10-1
Sampling procedures and tables for inspection of small lots or batches by attributes for percent nonconformingGB/T 13264-19911992-8-1
Single sampling procedures and tables for inspection having desired operating characteristics by attributes for percent nonconformingGB/T 13262-19911992-8-1
The procedures for skip-lot sampling inspection by attributesGB/T 13263-19911992-8-1
General rule for representation on network planning techniquesGB/T 13400.2-19921992-1-2
General progam of network planning techniques used in project managementGB/T 13400.3-19921992-1-2
Upper confidence limits of coefficient of variation for normal distributionGB/T 11791-19891990-7-1
Precision of test methods-Check the acceptability of test results obtained under repeatability or reproducibility conditions and to determine final test resultsGB/T 11792-19891990-7-1
The confidence interval of quantile Xp for normal distributionGB 10094-19881989-10-1
Multiple comparison for test resultsGB 10092-19881989-10-1
Probabilistic limit states design (Normal-Normal mode)GB 10093-19881989-10-1
Methodsf for andom sampling by utilizing dices of random numberGB 10111-19881989-8-1
Sampling procedures and tables for periodic inspection by attributes ( Apply to inspection of stability for productive process)GB/T 2829-19871988-5-1
Sampling procedures and tables for lot-by-lot inspection by attributes (Apply to inspection of successive lots or batches)GB/T 2828-19871988-5-1
Single and multi-level continuous sampling procedures and tables for inspection by attributesGB/T 8052-19871988-4-1
Statistical interpretation of data--Detection and handling of outlying observations in exponential sampleGB 8056-19871988-4-1
Statistical interpretation of data Parameter estimation for gamma distribution (Pearson 3 distribution)GB 8055-19871988-4-1
Sequential sampling procedures and tables for inspection by attributesGB/T 8051-19871988-4-1
Rules for rounding off of numberical valuesGB 8170-19871988-3-1
Statistical interpretation of data; Detection and handling of outlying observations in the sample of type I extreme value distributionGB 6380-19861987-5-1
Choice of sample size to estimate the average quality of a lot or processGB 4891-19851985-10-1
Statistical interpretation of data; Techniques of estimation and tests relating to means and variances of normal distributionsGB 4889-19851985-10-1
Control charts for arithmetic mean with warning limitsGB/T 4886-19851985-10-1
Terms and symbols of fault treeGB 4888-19851985-10-1
One-sided reliability confidence lower limit (Normal distribution complete sample)GB 4885-19851985-10-1
Cusum charts for counted/attributes dataGB/T 4887-19851985-10-1
Statistical interpretation of data; Power of tests relating to means and variances of normal distributionsGB 4890-19851985-10-1
Statistical interpretation of data One-sided reliability confidence lower limit (Binomial distribution)GB 4087.3-19851985-10-1
Statistical interpretation of data--Normality testsGB 4882-19851985-10-1
Statistical interpretation of data; Detection and handling of outlying observations in normal sampleGB 4883-19851985-10-1
Tables for statistical distributions;t-distributionGB 4086.3-19831984-10-1
Tables for statistical distributions;F-distributionGB 4086.4-19831984-10-1
ables for statistical distributions;Binomial distributionGB 4086.5-19831984-10-1
Statistical interpretation of data;Interval estimation of parameter in binomial distributionGB 4087.2-19831984-10-1
Tables for statistical distributions;x2-distributionGB 4086.2-19831984-10-1
Tables for statistical distributions;Poisson distributionGB 4086.6-19831984-10-1
Control charts for fraction defectiveGB/T 4091.6-19831984-10-1
Control charts for number of defectivesGB/T 4091.7-19831984-10-1
Statistical interpretation of data--Test for parameter in Poisson distributionGB 4090-19831984-10-1
Tables for statistical distributions;Normal distributionGB 4086.1-19831984-10-1
Statistical interpretation of data;Test for parameter in binomial distributionGB 4088-19831984-10-1
Statistical interpretation of data;Comparison of two means in the case of paired observationsGB 3361-19821984-1-1
Statistical interpretation of data;Determination of a statistical tolerance intervalGB 3359-19821984-1-1
About Us   |    Contact Us   |    Terms of Service   |    Privacy   |    Cancellation & Refund Policy   |    Payment
Tel: +86-10-8572 5655 | Fax: +86-10-8581 9515 Email: coc@codeofchina.com | Send me a messageQQ: 672269886
Copyright: Foryou Tech Co., Ltd. 2008-2040