Code of China Chinese Classification Professional Classification ICS Classification Latest Value-added Services

Chinese National Standard List: Plastic profile

Title Standard No. Implemented On
Microporous PTFE membraneT/ZZB 0067-2016
Plastics—Extruded sheets of polypropylene (PP)—Requirements and test methodsGB/T 39937-20212021-10-1
Plastics pipes and fittings—Equipment for fusion jointing polyethylene systems—Part 3:Operator’s badgeGB/T 20674.3-20202021-6-1
Plastics piping and ducting systems—Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolationGB/T 18252-20202021-6-1
Polyethylene of raised temperature resistance (PE-RT) piping systems for hot and cold water installations—Part 2:PipesGB/T 28799.2-20202021-6-1
Chlorinated poly (vinyl chloride) (PVC-C) piping systems for hot and cold water installations—Part 1:GeneralGB/T 18993.1-20202021-6-1
Polybutene (PB) piping systems for hot and cold water installations—Part 2:PipesGB/T 19473.2-20202021-6-1
Determination of the poly vinyl chloride (PVC) content of unplasticized poly vinyl chloride (PVC-U) pipes and fittings—Method based on total chlorine contentGB/T 39506-20202021-6-1
Test method for buckling resistance of the thermoplastics inspection chamber basesGB/T 39395-20202021-6-1
Plastic composite hose for gas welding,cutting and allied processesGB/T 39389-20202021-6-1
Polybutene (PB) piping systems for hot and cold water installations—Part 3:FittingsGB/T 19473.3-20202021-6-1
Plastics pipes and fittings—Equipment for fusion jointing polyethylene systems—Part 2:ElectrofusionGB/T 20674.2-20202021-6-1
Polybutene (PB) piping systems for hot and cold water installations—Part 1:GeneralGB/T 19473.1-20202021-6-1
Plastics piping and ducting systems—Thermoplastics pipes—Determination of ring flexibilityGB/T 39385-20202021-6-1
Thermoplastics piping systems for soil and waste discharge inside buildings—Test method for airtightness of jointsGB/T 39382-20202021-6-1
Plastics pipes and fittings—Equipment for fusion jointing polyethylene systems—Part 1:Butt fusionGB/T 20674.1-20202021-6-1
Plastic/aluminum/plastic composite pressure pipes—Part 2:Composite pipes butt-welded by aluminum pipeGB/T 18997.2-20202021-6-1
Chlorinated poly (vinyl chloride) (PVC-C) piping systems for hot and cold water installations—Part 3:FittingsGB/T 18993.3-20202021-6-1
Polyethylene of raised temperature resistance (PE-RT) piping systems for hot and cold water installations—Part 3:FittingsGB/T 28799.3-20202021-6-1
Plastic/aluminum/plastic composite pressure pipes—Part 1:Composite pipes overlap-welded by aluminum pipeGB/T 18997.1-20202021-6-1
Thermoplastics piping systems for underground non-pressure applications—Test method for leaktightness of elastomeric sealing ring type jointsGB/T 39383-20202021-6-1
Chlorinated poly (vinyl chloride)(PVC-C)piping systems for hot and cold water installations—Part 5:Fitness for the purpose of systemGB/T 18993.5-20202021-6-1
Thermoplastics piping systems for non-pressure applications—Test method for watertightnessGB/T 39379-20202021-6-1
Plastics pipes and fittings—Equipment for fusion jointing polyethylene systems—Part 4:Traceability codingGB/T 20674.4-20202021-6-1
Polybutene (PB) piping systems for hot and cold water installations—Part 5:Fitness for purpose of the systemGB/T 19473.5-20202021-6-1
Polyethylene of raised temperature resistance (PE-RT) piping systems for hot and cold water installations—Part 5:Fitness for purpose of the systemGB/T 28799.5-20202021-6-1
Polyethylene of raised temperature resistance(PE-RT) piping systems for hot and cold water installations—Part 1:GeneralGB/T 28799.1-20202021-6-1
Spoolable reinforced plastic pipe—Part 2:Fiber reinforced thermoplastic coiled pipeGB/T 38725.2-20202020-11-1
Polyethylene blown covering film for agricultureGB/T 4455-20192020-7-1
Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes,fittings and compoundsGB/T 18251-20192020-3-1
Plastic equipment for water saving irrigation - Part 5: Sub-surface drip irrigation pipeGB/T 19812.5-20192020-3-1
Unplasticized polyvinyl chloride (PVC-U) structure wall pipeline system for underground soil waste and drainage—Part 3: Axial hollow-wall construction pipesGB/T 18477.3-20192020-3-1
Polyolefin pipes for the conveyance of fluids—Determination of resistance to crack propagation—Test method for slow crack growth(notch test)GB/T 18476-20192020-3-1
Ethylene-vinyl acetate copolymer(EVA) blown covering film for agricultureGB/T 20202-20192020-3-1
Polyethylene structure wall pipeline system for underground usage—Part 1: Polyethylene double wall corrugated pipesGB/T 19472.1-20192020-3-1
Ball valves of thermoplastics materialsGB/T 37842-20192020-3-1
Plastics pipes used for pipeline rehabilitation—GeneralGB/T 37862-20192020-3-1
Gate valves of thermoplastics materialsGB/T 38008-20192020-3-1
Plastic equipment for water saving irrigation—Part 4:Polyethylene(PE)flexible pipeGB/T 19812.4-20182019-7-1
Polypropylene(PP)structure-wall piping systems for underground drainage and sewerage—Part 2:Polypropylene spirally enwound structure-wall pipesGB/T 35451.2-20182019-7-1
Unplasticized poly(vinyl chloride)(PVC-U)pipes for soil and waste discharge inside buildingsGB/T 5836.1-20182019-7-1
Unplasticized poly(vinyl chloride)(PVC-U) fittings for soil and waste discharge inside buildingsGB/T 5836.2-20182019-7-1
General terms and their definitions of thermoplastic pipes,fittings and valvesGB/T 19278-20182019-7-1
Thermoplastics piping systems for the conveyance of fluids—Determination of the resistance to internal pressureGB/T 6111-20182018-10-1
Polyethylene(PE)piping systems for water supply—Part 3: FittingsGB/T 13663.3-20182018-10-1
Polyethylene(PE) piping systems for water supply—Part2: PipesGB/T 13663.2-20182018-10-1
Polyethylene (PE) piping systems for water supply—Part 5: Fitness for purpose of the systemGB/T 13663.5-20182018-10-1
Polypropylene(PP) structure-wall piping systems for underground drainage and sewerage―Part 1:Polypropylene double wall corrugated pipesGB/T 35451.1-20172018-7-1
Polyethylene structure-wall piping systems for underground usage―Part 2:Polyethylene spirally enwound structure-wall pipesGB/T 19472.2-20172018-7-1
Polyethylene(PE) piping systems for water supply—Part 1: GeneralGB/T 13663.1-20172018-7-1
Polypropylene(PP) piping systems for hot and cold water installations—Part 1:GeneralGB/T 18742.1-20172018-5-1
Plastic equipment for water saving irrigation—Part 1：Drip tape with labyrinth on one sideGB/T 19812.1-20172018-5-1
Polypropylene(PP)piping systems for hot and cold water installations- Part 3:FittingsGB/T 18742.3-20172018-5-1
Polypropylene(PP) piping systems for hot and cold water installations―Part 2:PipesGB/T 18742.2-20172018-5-1
Rigid polyvinyl chloride flooringGB/T 34440-20172018-5-1
Plastic equipment for water saving irrigation-Part 3:Drip pipe and drip tape inlaid with emitters insideGB/T 19812.3-20172018-5-1
Plastic equipment for water saving irrigation—Part 2: Pressure compensating emitter and emitting pipeGB/T 19812.2-20172018-5-1
Unplasticized poly(vinyl chloride)(PVC-U)structured-wall pipes for soil and waste discharge inside buildingsGB/T 33608-20172017-12-1
High performance unplasticized poly(vinyl chloride) pipes and fittings for water supplyCJ/T 493-20162016-12-1
Polyethylene heat-shrinkable film for packaging applicationsGB/T 13519-20162016-11-1
Anti static and acid proof protective filmT/GDEIA 02-20162016-10-1
Transfer of polyester film by heating methodT/GDEIA 01-20162016-10-1
Unplasticizedpoly (vinyl chloride) (PVC-U) piping system for industrial applications―Part 2: FittingsGB/T 4219.2-20152016-7-1
Cross helically wound steel wires reinforced-polyethylene composite pipelines for water supplyGB/T 32439-20152016-7-1
Plastics pipes and fittings―Butt fusion jointing procedures for polyethylene(PE)pipes and fittings used in the construction of gas and water distribution systemsGB/T 32434-20152016-7-1
Thermoplastics pipes―Determination of ring stiffnessGB/T 9647-20152016-7-1
Modified impact resistance poly(vinyl chloride)(PVC-M) pipe system for water supply―Part 2:FittingsGB/T 32018.2-20152016-4-1
Biaxially oriented polypropylene matt filmGB/T 32021-20152016-4-1
Polyvinyl butyral interlayer for laminated glassGB/T 32020-20152016-4-1
Polyethylene/aluminum/polyethylene composite pressure pipe(overlap-welded)CJ/T 108-20152016-4-1
Pendulum impact resistance of plastic filmGB/T 8809-20152016-4-1
Modified impact resistance poly(vinyl chloride)(PVC-M)pipe system for watersupply―Part 1:PipesGB/T 32018.1-20152016-4-1
Test method for attrition rate of transparent plastic filmGB/T 31727-20152016-1-1
Test method for anti-fogging property of plastic filmGB/T 31726-20152016-1-1
Test method for mass per unit area of plastic filmGB/T 31729-20152016-1-1
Ethylene Vinyl Acetate (EVA) Interlayer for Building Photovoltaic ModuleJG/T 450-20142015-4-1
Measuring thickness of plastics pipe by utrasonic methodDB33/T 922-20142014-6-6
Determination of Axial Coefficient of Linear Expansion of Plastics Pipes for Water SupplyGB/T 30086-20132014-3-1
Wood-plastic composite siding for building decorationQB/T 4492-20132013-12-1
Establishing performance ratings for wood-plastic composite deck boards and guardrail system performanceGB/T 29419-20122013-8-1
Fluorinated ethylene-propylene(FEP)filmQB/T 4398-20122013-6-1
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: FittingsGB/T 28799.3-20122013-3-1
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 1: GeneralGB/T 28799.1-20122013-3-1
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 2: PipesGB/T 28799.2-20122013-3-1
Globe valves of thermoplastics materialsGB/T 28494-20122012-11-1
Geosynthetics—Polyethylene geomembraneGB/T 17643-20112012-9-1
Unplasticized polyvinyl chloride (PVC-U) structure wall pipeline system for underground soil waste and draindge—Part 2:Ultra-Rib pipesGB/T 18477.2-20112012-7-1
Valves made of unplasticized poly(vinyl chloride)(PVC-U)for water supplyGB/T 10002.3-20112012-7-1
Cast polypropylene (CPP) filmGB/T 27740-20112012-7-1
Polypropylene(PP) valves for pipes under pressure - Basic dimensions - Metric series GB/T 27734-20112012-5-1
Butterfly valves of thermoplastics materials GB/T 27725-20112012-3-1
Biaxially oriented polystyrene twist filmGB/T 26191-20102011-6-1
Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels—Part 1:Metal fittings for pipes of nominal outside diameter less than or equal to 63 mmGB 26255.1-20102011-6-1
Biaxially oriented polystyrene window filmGB/T 26190-20102011-6-1
Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels—Part 2:Metal fittings for pipes of nominal outside diameter greater than 63 mmGB 26255.2-20102011-6-1
Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels―Part 2:Metal fittings for pipes of nominal outside diameter greater than 63 mmGB/T 26255.2-20102011-6-1
Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels―Part 1:Metal fittings for pipes of nominal outside diameter less than or equal to 63 mmGB/T 26255.1-20102011-6-1
Coatable biaxially oriented polypropylene film for synthetic paperGB/T 26192-20102011-6-1
Thickness limit and test method of mulch film for cotton plantingGB/T 25414-20102011-3-1
Polytetrafluoroethylene RodQB/T 4041-20102010-10-1
Fibre reinforced polypropylene(FRPP) ultra-rip pipes for underground usageQB/T 4011-20102010-10-1
Plasticized polyvinyl chloride(PVC) tubing for medical usesGB/T 10010-20092010-6-1
Plasticized polyvinyl chloride(PVC) tubing for medical usesGB 10010-20092010-6-1
High-density polyethylene silicore plastic ductGB/T 24456-20092010-3-1
Unplasticized polyvinyl chloride (PVC-U) structure wall pipeline system for underground soil waste and drainage—Part 3:Bilayer and hollow-wall construction with axial hollow pipesGB/T 18477.3-20092010-3-1
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings—Chlorinated poly (vinyl chloride)(PVC-C)GB/T 24452-20092010-3-1
Plastics—Unplasticized poly (vinyl chloride) sheets—Types dimensions and characteristics—Part 1:Sheets of thickness not less than 1 mmGB/T 22789.1-20082009-9-1
Biaxially oriented polypropylene (BOPP) film for general useGB/T 10003-20082009-9-1
Polyethylene blown film for packaging applicationsGB/T 4456-20082009-9-1
Plastic Laminated Films and Pouches for Packaging - Dry Lamination and Extrusion LaminationGB/T 10004-20082009-8-1
Thermoplastics pipes for the conveyance of fluids - Nominal outside diameters and nominal pressuresGB/T 4217-20082009-5-1
Plastics piping systems - Plastics components - Determination of dimensionsGB/T 8806-20082009-5-1
Plastics pipes and fittings used for irrigation basic parameters and technical requirementsGB/T 23241-20092009-5-1
Plastics piping and ducting systems - Determination of the long - term hydrostatic strength of thermoplastics materials in pipe form by extrapolation GB/T 18252-20082009-5-1
Unplasticized polyvinyl chloride (PVC-U) pipes with a cellular core for drainageGB/T 16800-20082009-5-1
Geosynthetics - Plastic geogridsGB/T 17689-20082008-10-1
Plastics piping system for industrial applications - Unplasticized poly (vinyl chloride) (PVC-U) - Specifications for components and the system - Part 1: PipesGB/T 4219.1-20082008-10-1
Unplasticized polyvinyl chloride(PVC-U) pipes—Dichloromethane resistance test methodGB/T 13526-20072008-9-1
Test method for unplasticized polyvinyl chloride(PVC-U)fittings by fallingGB/T 8801-20072008-9-1
plastic equipment for water saving irrigarion - Drip pipe and tape inlaid with emitters insideGB/T 19812.3-20082008-9-1
General rules of laminated films & pouches for packagingGB/T 21302-20072008-9-1
Plastics pipes and fittings—Determination of opacityGB/T 21300-20072008-9-1
Unplasticized polyvinyl chloride (PVC-U) structure wall pipline system for underground soil waste and drainage - Part 1: double wall corrugated pipesGB/T 18477.1-20072008-9-1
Creep testing and evaluating method on plastic georidsQB/T 2854-20072007-12-1
Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 2: ElectrofusionGB/T 20674.2-20062007-5-1
Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 1：Butt fusionGB/T 20674.1-20062007-5-1
Define,classify,marking and degradability requirement of degradable plasticGB/T 20197-20062007-1-1
Low density polyethylene pipes for water supplyQB/T 1930-20062006-12-1
Buried spirally wound steelreinforced plastic pipes for sewerage engineeringQB/T 2783-20062006-12-1
Buried polypropylene pipes for water supplyQB/T 1929-20062006-12-1
Determination of deflection for rigid plastic pipesQB/T 2803-20062006-10-11
Unplasticized poly(vinyl chloride)(PVC-U)pipes for non-pressure buried drainage and sewerage systemsGB/T 20221-20062006-10-1
Unplasticized poly(vinyl chloride)(PVC-U)pipes for low-pressure conveyance in irrigationGB/T 13664-20062006-10-1
Mechanical joint fittings for use with polyethylene pressure pipes for irrigation purposes GB/T 20201-20062006-8-1
Ethylene-vinyl acetate copolymer blown covering film for agricultureGB/T 20202-20062006-8-1
Unplasticized poly(vinyl chloride)(PVC-U) pipes for water supplyGB/T 10002.1-20062006-8-1
Acrylonitrile-butadiene-styrene (ABS) pressure piping systems - Part 1: Pipes GB/T 20207.1-20062006-8-1
Unplasticized poly (vinyl chloride) (PVC-U) pipes for soil and waste discharge inside buildings GB/T 5836.1-20062006-8-1
Polyehylene (PE)pipes for irrigation laterals - Test method and specification of susceptibility to environmental stress cracking induced by insert-type fittingsGB/T 15819-20062006-8-1
Acrylonitrile-butadiene-styrene (ABS) pressure piping systems—Part 2:FittingsGB/T 20207.2-20062006-8-1
Unplasticized poly (vinyl chloride) (PVC-U) fittings for soil and waste inside buildings GB/T 5836.2-20062006-8-1
Polyethylene blown covering film for agricultureGB 4455-20062006-8-1
Thermoplastics piping systems for hot and cold water supply—Test method for the resistance of pipes and fittings mounted assemblies to thermal cyclingGB/T 19993-20052006-5-1
Plastic pipes in coal mining Part 2: Polyvinyl chloride pipesMT 558.2-20052006-2-1
Plastic net protecting top-plane in coal miningMT 141-20052006-2-1
Buried chlorinated polyvinyl chloride (PVC-C) pipes for high-tension power cableQB/T 2479-20052006-1-1
Plastic pipes in coal mining Part 3: Fibre-reinforced plastic pipesMT 558.3-20052006-1-1
Plastic pipes in coal mining Part 1: Polyethylene pipesMT 558.1-20052006-1-1
Plastic equipment for water saving irrigation - Part 1 ：Drip tape with labyrinth on one sideGB/T 19812.1-20052005-12-1
Plastic equipment for water saving irrigation--Part 2:Pressure compensating emitter and emitting pipeGB/T 19812.2-20052005-12-1
Buried polyethylene (PE) piping systems for the supply of gaseous fuels—Part 2:FittingsGB 15558.2-20052005-12-1
Polyethylene (PE) pipe and fittings—Determination of the tensile strength and failure mode of test pieced from a butt-fused jointGB/T 19810-20052005-10-1
Plastics pipes and fittings - Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90mmGB/T 19808-20052005-10-1
Plastics pipes and fittings--Crushing decohesion test for polyethylene (PE) electrofusion assembliesGB/T 19806-20052005-10-1
Polyethylene (PE) pipings systems for water supply - Part 2: FittingsGB/T 13663.2-20052005-10-1
Plastics pipes and fittings - Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusionGB/T 19809-20052005-10-1
Single wall corrugated plastics pipes for agricultural drainageGB/T 19647-20052005-9-1
Plastics pipes and fittings--Polyethylene (PE) tapping tees--Test method for impact resistanceGB/T 19712-20052005-9-1
Heat-resistant polyethylene terephthalate (PET) bottleQB/T 2665-20042005-6-1
Packing label of biaxially oriented polypropylene plain filmQB/T 2666-20042005-6-1
Define making and biodegradable requirement of biodegradable plastic sheetQB/T 2671-20042005-6-1
Polyethylene terephthalate (PET) bottle for carbonation drinkQB/T 1868-20042005-6-1
Unplasticized polyvinyl chloride (PVC-U) double wall corrugated pipesQB/T 1916-20042005-6-1
Buried multi-hole plastics for communication Part 1: Unplasticized polyvinyl chloride (PVC-U) multi-hole pipesQB/T 2667.1-20042005-6-1
Ultra-high-molecular-weight polyethylene (PE-UHMW) pipesQB/T 2668-20042005-6-1
Define classify marking and degradability requirement of degradable plastic sheetQB/T 2670-20042005-6-1
Define making and compost ability requirement of compostable plastic sheetQB/T 2672-20042005-6-1
Buried multi-hole plastics pipes for communication Part 2: Polyethylene (PE) multi-hole pipesQB/T 2667.2-20042005-6-1
Test method for drop-proof properties of drop-proof plastic filmsGB/T 19603-20042005-5-1
Low pressure fiberglass line pipe and fittingsSY/T 6266-20042004-11-1
Polyethylene structure-wall piping system for underground usage part 2:Polyethylene spirally enwound structure-wall pipesGB/T 19472.2-20042004-10-1
Polybutylene(PB) piping systems for hot and cold water installations - Part 1: GeneralGB/T 19473.1-20042004-10-1
Polyethylene structure wall pipeline system for underground usage Part 1:Polyethylene double wall corrugated pipesGB/T 19472.1-20042004-10-1
Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride)(PVC-U) pipes - Test method for leaktighness under internal pressGB/T 19471.1-20042004-10-1
Polybutylene (PB) piping systems for hot and cold wter installations - Part 2:PipesGB/T 19473.2-20042004-10-1
Polybutylene(PB)piping systems for hot and cold water installations - Part 3: fittingsGB/T 19473.3-20042004-10-1
Geosythetic - Plastic geonetGB/T 19470-20042004-10-1
Plastics piping systems - Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride)(PVC-U) for use with PVC-U pipes - Test method for leaktightness under negaGB/T 19471.2-20042004-10-1
Buried polyethylene (PE) piping systems for the supply of gaseous fuels - Part 1: PipesGB 15558.1-20032004-6-1
Fittings made of unplasticized poly(vinyl chloride)(PVC-U) for water supplyGB/T 10002.2-20032004-6-1
Polyethylene pipes—Resistance to slow crack growth—Cone test methodGB/T 19279-20032004-2-1
General terms and their definitions of thermoplastic pipes,fittings and valvesGB/T 19278-20032004-2-1
Geosynthetics - Plastic geocellGB/T 19274-20032004-2-1
Thermoplastics pipes for the conveyance of fluids—Determination of resistance to rapid crack propagation（RCP）—Small-scale steady-state test （S4 test）GB/T 19280-20032004-2-1
Polyethylene/Aluminium/Polyethylene composite pressure pipe - Part 2: PE/AL/PE pipe butt - Welded by aluminium pipeGB/T 18997.2-20032003-10-1
Chlorinated poly (vinyl chloride)(PVC-C) piping systems for industrial applications--Part 3:FittingsGB/T 18998.3-20032003-10-1
Chlorinated poly (vinyl chlorid) (PVC-C) piping systems for industrial applications - Part 1: GeneralGB/T 18998.1-20032003-10-1
Polyethylene/Aluminium/Polyethylene composite pressure pipe--Part 1:PE/AL/PE pipe overlap-welded by aluminium pipeGB/T 18997.1-20032003-10-1
Chlorinated poly(vinyl chloride)(PVC-C) piping systems for industrial applicatoins--Part 2:PipesGB/T 18998.2-20032003-10-1
Crosslined polyethylene (PE-X）管道系统 第2部分：管材GB/T 18992.2-20032003-8-1
Chlorinated poly(vinyl chloride)piping system for hot and cold water installations--Part 1:GeneralGB/T 18993.1-20032003-8-1
Chlorinated poly(vinyl chloride)piping systems for hot and cold water installations—Part 3:FittingsGB/T 18993.3-20032003-8-1
Thermoplastics pipes and fittings for hot and cold water systemsGB/T 18991-20032003-8-1
Crosslined polyethylene(PE-X)piping systems for hot and cold water installatins--Part 1:GeneralGB/T 18992.1-20032003-8-1
Thermoplastics pipes for the conveyance of fluids - Resistance to internal pressure - Test methodGB/T 6111-20032003-8-1
Thermoplastics pipes--Determination of ring stiffnessGB/T 9647-20032003-8-1
Chlorinated poly(vinyl chloride)piping systems for hot and cold water installations--Part 2:PipesGB/T 18993.2-20032003-8-1
Thermoplastics pipes for the transport of fluids--Determination of impact by the charpy methodGB/T 18743-20022003-1-1
Polypropylene piping systems for hot and cold water installation--Part 3:FittingsGB/T 18742.3-20022003-1-1
Polypropylene piping systems for hot and cold water installation--Part 2:PipesGB/T 18742.2-20022003-1-1
Polypropylene piping systems for hot and cold water installation - Part 1: GeneralGB/T 18742.1-20022003-1-1
Geosynthetics--Plastic three dimensional erosion control matGB/T 18744-20022003-1-1
pipes - Determination of resistance to external blows - Round - The - Clock methodGB/T 14152-20012002-5-1
Table of universal wall thickness of thermoplastics pipeGB/T 10798-20012002-5-1
Thermoplastics materials for pipes and fittings for pressure applications - Classification and designation - Overall service (design) coefficientGB/T 18475-20012002-5-1
Polyolefin pipes for the conveyance of fluids - Determination of resistance to crack propagation - Test method for slow crack growth on notched pipes (notch test)GB/T 18476-20012002-5-1
Pipes and fittings made of crosslinked polythylene (PE-X) - Estimation of the degree of crossinking by determination of the gel contentGB/T 18474-20012002-5-1
Fittings of injection-moulded unplasticized polyvinyl chloride (PVC-U)--Hot oven testGB/T 8803-19882002-5-1
Thermoplastics pipes - Determination of longitudinal reversionGB/T 6671-20012002-5-1
Thermoplastics pipes for the conveyance of fluids--Nominal outside diameters and nominal pressuresGB/T 4217-20012002-5-1
Unplasticized polyvinyl chloride(PVC-U) double wall corrugated pipes for underground soill,waste and drainageGB/T 18477-20012002-5-1
Polyetylene pipes for water supplyGB/T 13663-20002001-5-1
Method for the assessment of pigment or carbon black dispersion in polyolefin pipes, fittings and compoundsGB/T 18251-20002001-5-1
Plastics piping and ducting systems--Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolationGB/T 18252-20002001-5-1
Biaxially oriented polypropylene film for heat-sealGB/T 12026-20002001-5-1
Polyethylene (PE) Extruded PlatesQB/T 2490-20002001-2-1
Rigid PVC (PVC-U) Pipe and Pipe Fittings for Building QB/T 2480-20002000-10-1
Plastics - Film and Sheeting - Determination of Gas Transmission - Differential-pressure MethodGB/T 1038-20002000-9-1
Thermoplastics pipes--Determination of creep ratioGB/T 18042-20002000-9-1
Agricultural Flexible PVC Calendering and Stentering Film QB/T 2472-20002000-8-1
Specification for Cast Acrylic Sheet for Baths and Shower Trays for Domestic PurposesJC/T 858-20002000-8-1
Polyacrylonitrile (PP) Extrusion SheetQB/T 2471-20002000-8-1
Specification for Nonoriented Polyethylene and Polypropylene Plastic FilmQB/T 1125-20002000-8-1
UnPlasticized Polyvinyl Chloride Low Foaming Sheet - Celuka MethodQB/T 2463.2-19992000-3-1
Coextrusion of Rigid PVC with Low Foaming SheetQB/T 2463.3-19992000-3-1
Degradable Polyethylene Films for PackagingQB/T 2461-19992000-3-1
UnPlasticized Polyvinyl Chloride Low Foaming Sheet - Free Foaming Method QB/T 2463.1-19992000-3-1
Geosynthetics - Polyvinyl chloride geomembraneGB/T 17688-19991999-7-1
Geosynthetics--Plastic geogridGB/T 17689-19991999-7-1
Geosynthetics--Plastic woven film yarn geotextileGB/T 17690-19991999-7-1
Low density polyethylene(LDPE) pipes for sprinkler irrigationQB/T 3803-19991999-4-21
Polytetrafluoroethylene (PTFE) Tapes for Thread SealingQB/T 3628-19991999-4-21
Unplasticized polyvinyl chloride(PVC)fittings for chemical industryQB/T 3802-19991999-4-21
Test method of corrosion on the unplasticized polyvinyl chloride(PVC)pipes for chemical industryQB/T 3801-19991999-4-21
Polytetrafluoroethylene FilmQB/T 3627-19991999-4-21
Polytetrafluoroethylene TubeQB/T 3624-19991999-4-21
Polyvinyl Chloride Plastic Corrugated Wiring Tube QB/T 3631-19991999-4-21
Polytetrafluoroethylene PlateQB/T 3625-19991999-4-21
Polyvinyl Choride Heat-shrinkable Film and TubeQB/T 3632-19991999-4-21
Polytetrafluoroethylene RodQB/T 3626-19991999-4-21
Biaxially oriented polypropylene laminated polyethylene (BOPP/LDPE) films and pouchesGB/T 10005-19981999-2-1
Test method for thermal stability of polyethylene pipes and fittings GB/T 17391-19981999-2-1
Laminated retort film and pouchGB/T 10004-19981999-2-1
Unplasticized polyvinyl chloride (PVC-U) pipes with a cellular core for drainage and sewerage systemsGB/T 16800-19971998-1-1
Rigid polyvinyl chloride laminated platesGB/T 4454-19961997-7-1
Unplasticized polyvinyl chloride (PVC-U) pipes for buried drainage and sewerage systemsGB/T 10002.3-19961997-5-1
Unplasticized polyvinyl chloride (PVC-U)pipe for water supplyGB/T 10002.1-19961997-5-1
Table of universal wall thickness of thermoplastics pipeGB/T 10798-19891996-8-1
Rigid Polyvinyl Chloride (PVC-U) Extruded SectionsQB/T 2133-19951996-4-1
Hard polyvinyl chloride (PVC-U) pipes for chemical industry GB/T 4219-19961996-1-2
Coated Knitted fabrics from expanded PVCGB/T 6668-19941995-10-1
ABS/PVC Sheet Material QB/T 2029-19941995-6-1
SPVC Decorative Film QB/T 2028-19941995-6-1
Rigid polyvinyl chloride sheet and film for foodstuff packingGB/T 15267-19941995-4-1
Buried polyethylene (PE) fittings for the supply of gaseous fuelsGB 15558.2-19951995-1-2
Standard test method for short - Time hydraulic failure and resistance to constant internal pressure of the plastics pipes for the transport of fluidsGB/T 15560-19951995-1-2
Calendered film(sheet) from flexible PVCGB/T 3830-19941994-12-1
Polypropylene (PP) Pipes for Water SupplyQB/T 1929-19931994-8-1
Low Density Polyethylene (LDPE, LLDPE) Pipes for Water SupplyQB/T 1930-19931994-8-1
Unplasticized Polyvinyl Chloride (PVC-C) Double Wall Corrugated PipesQB/T 1916-19931994-8-1
Method for Determination of Tensile Properties of Polyester Films Used for TapesHG/T 2538-19931994-7-1
High Impact Polystyrene Extruded PlatesQB 1869-19931994-7-1
test method for impact resistance of rigid plastics by means of falling weightGB/T 14153-19931993-10-1
Plastics－Film and sheeting－Test method for wetting tensionGB/T 14216-19931993-10-1
Thermoplastic pipes -Determination of resistance to external impact -True impact rate methodGB/T 14152-19931993-10-1
Polyethylene Plastic Hollow Board QB/T 1651-19921993-9-1
Unplasticized polyvinyl chloride fittings for drainage in buildingsGB/T 5836.2-19921993-8-1
Unplasticized polyvinyl chloride pipes for drainage in buildingsGB/T 5836.1-19921993-8-1
High density polyethylene pipes for water supplyGB/T 13663-19921993-6-1
Thin wall unplasticized polyvinyl chloride(PVC-U) pipes for low-pressure conveyance in irrigationGB/T 13664-19921993-6-1
Tracer Method for Measurement of Surface Roughness of Polyester Film for TapeHG/T 2348-19921993-3-1
Unplasticized polyvinyl chloride extruded platesGB/T 13520-19921993-3-1
Heat shrinkable polyethylene filmGB/T 13519-19921993-3-1
Plasticized polyvinyl chloride tubing for transport of fluidsGB/T 13527.1-19921993-3-1
Polyester Film for Broadcast Audio TapeHG 2346-19921993-3-1
Unplasticized polyvinyl chloride (PVC－) pipes－Dichloromethane testGB/T 13526-19921993-3-1
Performed insulating pipes for polyurethane [PUR] foamed plasticsCJ/T 3002-19921993-2-1
Polyvinyl Choride Microporous Clapboard for Lead-acid BatteryQB 1258-19911992-6-1
Determination for the carbon black content of polyethylene pipes and fittings by calcination and pyrolysisGB 13021-19911992-4-1
Plastics-Determination of tensile properties of filmsGB 13022-19911992-4-1
Polyethylene Blown Film for Liquid PackagingQB 1231-19911992-4-1
Determination for the carbon black content of polyethylene pipes and fittings by calcination and pyrolysisGB/T 13021-19911992-4-1
Polyvinyl Choride Nylon Fabric Based Artificial LeatherQB 1230-19911992-4-1
SPVC Blown FilmQB 1257-19911992-3-1
Polyethylene Air Cushion FilmQB/T 1259-19911992-1-1
Test method for dimensional stability of plastic filmsGB/T 12027-19891990-10-1
Plasticized polyvinyl chloride (PVC)tubing for medical usesGB 10010-19881989-7-1
Acrylonitrile-butadiene-styrene (ABS) plastics extru-sion platesGB 10009-19881989-7-1
Biaxiality oriented polypropylene laminated polyethylene (BOPP/LDPE) films and packagesGB 10005-19881989-7-1
Unplasticized polyvinyl chloride (PVC-U) fitting for water supplyGB/T 10002.2-19881989-7-1
Thermoplastic pipes - Determination of tensile properties - Party 1: General test methodGB/T 8804.1-20031989-2-1
Thermoplastics pipes and fitting - Determination of vicat softening temperatureGB/T 8802-20011989-2-1
Test method for extemal loading resistance for plastic pipeGB/T 9647-19881989-2-1
Test methods of tensile properties for thermoplastic pipes--Polyvinyl chloride (PVC) pipesGB/T 8804.1-19881988-7-1
Method for dimension measuring of plastic pipesGB 8806-19881988-7-1
Test method for unplasticized PVC fittings by fallingGB 8801-19881988-7-1
Determination of deflection for rigid plastic pipesGB/T 8805-19881988-7-1
Cellular plastics; Determination of shear strength of rigid materialsGB 10007-19881988-5-1
Plastics; Film and sheeting-Determination of the coefficients of frictionGB 10006-19881988-5-1
Poly (methyl methacrylate) cast pearlized sheetsGB 7135-19861987-10-1
Thermoplastic pipes - Determination of tensile properties - Part 3: Polyolefin pipesGB/T 8804.3-20031987-6-1
Determination of vicat softeining temperature for unplasticized polyvinylchloride (PVC-U) pipes and fittingsGB/T 8802-19881987-6-1
Injection-moulded unplasticized poly(vinyl chloride)(PVC-U), chlorinated poly(vinyl chloride)(PVC - C), acrylonitrile-butadiene-styrene(ABS) and acrylonitrile-styrene-acrylester (ASA) fGB/T 8803-20011987-6-1
Standard test method for impact resistance of thermoplastic pipe and fittings by means of a tup (falling weight)GB/T 6112-19851986-2-1
Polyethylene blown film for packagingGB 4456-19841985-2-1
Unplasticized polyvinyl chloride (PVC)fittings for chemical industryGB 4220-19841984-12-1
Calendered film (sheet)from flexible PVCGB 3830-19831984-6-1
About Us   |    Contact Us   |    Terms of Service   |    Privacy   |    Cancellation & Refund Policy   |    Payment
Tel: +86-10-8572 5655 | Fax: +86-10-8581 9515 Email: coc@codeofchina.com | Send me a messageQQ: 672269886
Copyright: TransForyou Co., Ltd. 2008-2020