Title |
Standard No. |
Implemented On |
Flat head rivets | GB 109-1986 | |
Oval head semi-tubular rivets | GB 873-1986 | |
Double end studs bm=2d | GB 900-1988 | |
Thin head rivets | GB 872-1986 | |
Eye bolts | GB/T 798-2021 | 2022-7-1 |
Square head bolts―Product grade C | GB/T 8-2021 | 2022-7-1 |
Strenthened cup head square neck bolts | GB/T 794-2021 | 2022-7-1 |
Terminology of fasteners—Control, inspection, delivery, acceptance and quality | GB/T 3099.4-2021 | 2022-7-1 |
Countersunk head double nib bolts | GB/T 800-2020 | 2021-6-1 |
Mechanical properties of fasteners—Stainless steel and nickel alloys bolts, screws, studs and nuts for high temperature applications | GB/T 3098.24-2020 | 2021-6-1 |
Hexagon bolts with wire holes on head | GB/T 32.1-2020 | 2021-6-1 |
Hexagon bolts with wire holes on head—Fine pitch thread | GB/T 32.3-2020 | 2021-6-1 |
Mechanical properties of fasteners—Guidance for the selection of stainless steels and nickel alloys for fasteners | GB/T 3098.25-2020 | 2021-6-1 |
Fasteners—Types of inspection documents | GB/T 39310-2020 | 2021-6-1 |
Foundation bolts | GB/T 799-2020 | 2021-6-1 |
“E” rings | GB/T 896-2020 | 2020-10-1 |
Hexagon socket head cap screws-Fine pitch thread | GB/T 70.6-2020 | 2020-10-1 |
Tolerances for fasteners—Plain washers | GB/T 3103.3-2020 | 2020-10-1 |
Mechanical properties of fasteners—Prevailing torque type steel nuts | GB/T 3098.9-2020 | 2020-10-1 |
Hexalobular socket high countersunk head screws | GB/T 2673.2-2020 | 2020-10-1 |
Mechanical properties of fasteners—M42~M72 bolts, screws and studs | GB/T 3098.23-2020 | 2020-10-1 |
Hexalobular socket countersunk flat head screws | GB/T 2673.1-2018 | 2019-7-1 |
Square set screws with cup point | GB/T 84-2018 | 2019-7-1 |
Ring groove rivet assemblies—Specifications | GB/T 36993-2018 | 2019-7-1 |
High-strength structural bolting assemblies for preloading—Part 10:Assembly specifications | GB/T 32076.10-2018 | 2019-7-1 |
Spring-type straight pins—Slotted—Heavy duty | GB/T 879.1-2018 | 2019-7-1 |
Square set screws with long dog point and rounded end | GB/T 83-2018 | 2019-7-1 |
Spring-type straight pins—Coiled—Standard duty | GB/T 879.4-2018 | 2019-7-1 |
Slotted set screws with cup point | GB/T 74-2018 | 2019-7-1 |
Spring-type straight pins—Coiled—Light duty | GB/T 879.5-2018 | 2019-7-1 |
Slotted set screws with long dog point | GB/T 75-2018 | 2019-7-1 |
Slotted set screws with cone point | GB/T 71-2018 | 2019-7-1 |
Spring-type straight pins-Slotted-Light duty | GB/T 879.2-2018 | 2019-7-1 |
Spring-type straight pins—Coiled—Heavy duty | GB/T 879.3-2018 | 2019-7-1 |
Square set screws with long dog point | GB/T 85-2018 | 2019-7-1 |
Bolt or screw and washer assemblies with plain washers | GB/T 9074.1-2018 | 2019-7-1 |
Square set screws with short dog point and cone end | GB/T 86-2018 | 2019-4-1 |
Fastener―Steel bolts,screws and studs with polyamide locking pre-coating technical specification | GB/T 35478-2017 | 2018-7-1 |
Fastener―Steel bolts,screws and studs with microencapsulated adhesive pre-coating technical specification | GB/T 35480-2017 | 2018-7-1 |
Hexalobular internal driving feature for bolts and screws | GB/T 6188-2017 | 2018-4-1 |
Bolt or screw and washer assemblies with conical spring washers | GB/T 9074.32-2017 | 2018-4-1 |
Conical spring washers | GB/T 956.3-2017 | 2018-4-1 |
Terminology of fasteners—Coatings | GB/T 3099.3-2017 | 2018-4-1 |
Hexagon weld nuts with flange | GB/T 13681.2-2017 | 2018-4-1 |
Fasteners―Non-electrolytically applied zinc flake coatings | GB/T 5267.2-2017 | 2018-4-1 |
Conical spring washers for assemblies | GB/T 9074.31-2017 | 2018-4-1 |
Specifications for spring washers―Conical spring washers | GB/T 94.4-2017 | 2018-4-1 |
Hexalobular bolts with flange | GB/T 35481-2017 | 2018-4-1 |
Hexalobular socket head cap screws | GB/T 2671.2-2017 | 2018-2-1 |
Specifications for retaining rings--Circlips | GB/T 959.1-2017 | 2018-2-1 |
Hexalobular socket cheese (short) head screws | GB/T 2671.1-2017 | 2018-2-1 |
Slotted raised countersunk(oval)head tapping screws | GB/T 5284-2017 | 2018-2-1 |
Cross-recessed raised countersunk (oval) head tapping screws | GB/T 847-2017 | 2018-2-1 |
Tapping screw and washer assemblies with plain washers | GB/T 9074.18-2017 | 2018-2-1 |
Slotted set screws with flat point | GB/T 73-2017 | 2018-2-1 |
Retaining rings for bores | GB/T 893-2017 | 2018-2-1 |
Retaining rings for shaft | GB/T 894-2017 | 2018-2-1 |
Slotted countersunk(flat)head tapping screws | GB/T 5283-2017 | 2018-2-1 |
High-strength structural bolting assemblies for preloading. Part 9: Torshear type bolt with hexagon head with large width across flats, and nut assemblies | GB/T 32076.9-2017 | 2018-2-1 |
Cross-recessed countersunk(flat) head tapping screws | GB/T 846-2017 | 2018-2-1 |
Hexalobular socket pan head screws | GB/T 2672-2017 | 2018-2-1 |
Hexalobular socket countersunk head tapping screws | GB/T 2670.2-2017 | 2018-2-1 |
Hexalobular socket pan head tapping screws | GB/T 2670.1-2017 | 2018-2-1 |
Cross-recessed pan head tapping screws | GB/T 845-2017 | 2018-2-1 |
Slotted pan head tapping screws | GB/T 5282-2017 | 2018-2-1 |
Hexagon head tapping screws | GB/T 5285-2017 | 2018-2-1 |
Hexalobular socket raised countersunk head screws | GB/T 2674-2017 | 2018-2-1 |
Hexalobular socket raised countersunk(oval)head tapping screws | GB/T 2670.3-2017 | 2018-2-1 |
Hexagon socket button head screws | GB/T 70.2-2015 | 2017-1-1 |
Fasteners—Bolts, screws, studs and nuts—Symbols and descriptions of dimensions | GB/T 5276-2015 | 2017-1-1 |
Mechanical properties of fasteners—Nuts | GB/T 3098.2-2015 | 2017-1-1 |
Hexagon socket button head screws with collar | GB/T 70.4-2015 | 2017-1-1 |
Countersunk flat head screws with cross recess―Part 2: Property class 8.8, stainless steel screws and non-ferrous metal screws | GB/T 819.2-2016 | 2016-6-1 |
Slotted raised countersunk head screws | GB/T 69-2016 | 2016-6-1 |
Pan head screws with cross recess | GB/T 818-2016 | 2016-6-1 |
High-strength structural bolting assemblies for preloading―Part 3:System HR―Hexagon bolt with large width across flatsand nut assemblies | GB/T 32076.3-2015 | 2016-6-1 |
Hexagon bolts with flange--Small series | GB/T 16674.1-2016 | 2016-6-1 |
Hexagon washer head tapping screws | GB/T 16824.1-2016 | 2016-6-1 |
High-strength structural bolting assemblies for preloading―Part 2:Suitability for preloading | GB/T 32076.2-2015 | 2016-6-1 |
High-strength structural bolting assemblies for preloading―Part 4:System HV―Hexagon bolt with large width across flats and nut assemblies | GB/T 32076.4-2015 | 2016-6-1 |
Slotted cheese head screws | GB/T 65-2016 | 2016-6-1 |
Hexagon flange head tapping screws | GB/T 16824.2-2016 | 2016-6-1 |
Mechanical properties of fasteners-Set screws | GB/T 3098.3-2016 | 2016-6-1 |
Small pan head screws with cross recess | GB/T 823-2016 | 2016-6-1 |
Slotted pan head screws | GB/T 67-2016 | 2016-6-1 |
High strength bolts for joints of space grid structures | GB/T 16939-2016 | 2016-6-1 |
Type 2 all-metal hexagon nuts with flange | GB/T 6187.1-2016 | 2016-6-1 |
Nut design guide | GB/Z 32564-2016 | 2016-6-1 |
High-strength structural bolting assemblies for preloading―Part 5:Plain washers | GB/T 32076.5-2015 | 2016-6-1 |
Countersunk flat head screws with cross recess―Part 1: Property class 4.8 | GB/T 819.1-2016 | 2016-6-1 |
High-strength structural bolting assemblies for preloading―Part 1:General requirements | GB/T 32076.1-2015 | 2016-6-1 |
Prevailing torque type hexagon thin nuts(with non-metallic insert) | GB/T 6172.2-2016 | 2016-6-1 |
Mechanical properties of fasteners - Tapping screws | GB/T 3098.5-2016 | 2016-6-1 |
Hexagon bolts with flange―Fine pitch thread―Small series | GB/T 16674.2-2016 | 2016-6-1 |
Unthreaded stud for short-cycle drawn arc stud welding | GB/T 10432.2-2016 | 2016-6-1 |
Hexagon thin nuts―Fine pitch thread | GB/T 6173-2015 | 2016-4-1 |
Prevailing torque type hexagon nuts (with non-metallic insert),style 1 | GB/T 889.1-2015 | 2016-4-1 |
Raised countersunk head screws with cross recess | GB/T 820-2015 | 2016-4-1 |
Fasteners—Countersinks for countersunk head screws | GB/T 152.2-2014 | 2015-3-1 |
Mechanical Properties of fasteners- Stainless steel bolts, screws and studs | GB/T 3098.6-2014 | 2015-3-1 |
Mechanical properties of fasteners. Stainless steel tapping screws | GB/T 3098.21-2014 | 2015-3-1 |
Tolerances for fasteners―Bolt/nut assemblies for service temperatures from -200℃~+700℃ | GB/T 3103.4-2014 | 2015-3-1 |
Mechanecal properties of fasteners-Nuts made of stainless-steel | GB/T 3098.15-2014 | 2015-3-1 |
Cross recessed pan head thread rolling screws | GB/T 6560-2014 | 2015-3-1 |
Fasteners—Countersinks for countersunk head screws | GB/T 152.5-2014 | 2015-3-1 |
Hexagon head thread rolling screws | GB/T 6563-2014 | 2015-3-1 |
Mechanical properties of fasteners―Stainless steel set screws | GB/T 3098.16-2014 | 2015-3-1 |
Cup head square neck bolts | GB/T 12-2013 | 2014-3-1 |
Square head bolts with small head | GB/T 35-2013 | 2014-3-1 |
Hexagon bolts with slot on head | GB/T 29.1-2013 | 2014-3-1 |
Countersunk head nib bolts | GB/T 11-2013 | 2014-3-1 |
Hexagon bolts with split pin hole on shank | GB/T 31.1-2013 | 2014-3-1 |
Mushroom head square neck bolts | GB/T 14-2013 | 2014-3-1 |
Mushroom head nib bolts | GB/T 15-2013 | 2014-3-1 |
Cup head nib bolts | GB/T 13-2013 | 2014-3-1 |
Countersunk head square neck bolts | GB/T 10-2013 | 2014-3-1 |
Hexagon bolts with cross recess on head | GB/T 29.2-2013 | 2014-3-1 |
Hexagon fit shank bolts | GB/T 27-2013 | 2014-3-1 |
Steel nails | GB 27704-2011 | 2012-12-1 |
Steel nails for timber structures | LY/T 2059-2012 | 2012-7-1 |
Fasteners—Torque/clamp force testing | GB/T 16823.3-2010 | 2011-10-1 |
Unthreaded studs for drawn arc stud welding with ceramic ferrule | GB/T 10432.1-2010 | 2011-10-1 |
Unthreaded studs for capacitor discharge welding | GB/T 10432.3-2010 | 2011-10-1 |
Mechanical properties of fasteners—Bolts,screws and studs | GB/T 3098.1-2010 | 2011-10-1 |
Fasteners—Quality assurance system | GB/T 90.3-2010 | 2011-10-1 |
Threaded studs for drawn arc stud welding with ceramic ferrule | GB/T 902.2-2010 | 2011-10-1 |
Prevailing torque type hexagon nuts(with non-metallic insert),style 2 | GB/T 6182-2010 | 2011-10-1 |
~Mechanical Properties of Fasteners - Parts for Bolted Connections for Use at Temperatures from-200℃~+700℃ | GB/T 3098.8-2010 | 2011-10-1 |
Hexagon weld nuts with flange | GB/T 13681.2-2010 | 2011-10-1 |
Mechanical properties of fasteners—Prevailing torque type steel nuts | GB/T 3098.9-2010 | 2011-10-1 |
Threaded studs with flange(pitch)and stud with internal thread for short-cycle drawn arc stud welding | GB/T 902.4-2010 | 2011-10-1 |
Hexagon cap nuts—Welding type | GB/T 802.4-2009 | 2010-3-1 |
Specification for wire thread inserts | GB/T 24425.6-2009 | 2010-3-1 |
Acorn hexagon nuts with flange—Welding type | GB/T 802.3-2009 | 2010-3-1 |
Prevailing torque type hexagon acorn nuts with non-metallic insert—Welding type | GB/T 802.5-2009 | 2010-3-1 |
Prevailing torque type wire thread inserts for blind hole | GB/T 24425.4-2009 | 2010-3-1 |
Passivation of corrosion-resistant stainless-steel fasteners | GB/T 5267.4-2009 | 2010-3-1 |
Internal thread for wire thread inserts | GB/T 24425.5-2009 | 2010-3-1 |
General type wire thread inserts for blind hole | GB/T 24425.2-2009 | 2010-3-1 |
General type wire thread inserts | GB/T 24425.1-2009 | 2010-3-1 |
Acorn hexagon nuts | GB/T 923-2009 | 2010-3-1 |
Mechanical properties of fasteners made of the fine grain non-heat treatment steel—Bolts,screws and studs | GB/T 3098.22-2009 | 2010-3-1 |
Prevailing torque type wire thread inserts | GB/T 24425.3-2009 | 2010-3-1 |
Expansion anchors for use in concrete - Type and dimension | GB/T 22795-2008 | 2010-1-1 |
Mechanical properties of fasteners - Part 21:Tapping screws of stainless-steel | GB/T 3098.21-2008 | 2009-2-1 |
Hexalobular internal driving feature for bolts and screws | GB/T 6188-2008 | 2009-2-1 |
Weld studs for capacitor discharge welding | GB/T 902.3-2008 | 2009-2-1 |
Connections with waisted stud - Nuts extension sleeves | GB/T 13807.3-2008 | 2009-2-1 |
Specification for spring washers - Single coil lock washers | GB/T 94.1-2008 | 2009-2-1 |
Clevis pin with head | GB/T 882-2008 | 2009-2-1 |
Clevis pins without head | GB/T 880-2008 | 2009-2-1 |
Hexagon socket head cap screws | GB/T 70.1-2008 | 2009-2-1 |
Hexagon socket button head screws | GB/T 70.2-2008 | 2009-2-1 |
Acorn nuts - Assembling type | GB/T 802.1-2008 | 2009-2-1 |
Connections with waisted stud - Studs | GB/T 13807.2-2008 | 2009-2-1 |
Slotted pan head screws - Product grade A | GB/T 67-2008 | 2009-2-1 |
Specification for spring washers - Curved and wave spring washers | GB/T 94.3-2008 | 2009-2-1 |
Weld studs for manual welding | GB/T 902.1-2008 | 2009-2-1 |
Hexagon socket countersunk head screws | GB/T 70.3-2008 | 2009-2-1 |
Transverse vibration testing method for fasteners | GB/T 10431-2008 | 2009-2-1 |
Fasteners - General requirements for bolts screws studs and nuts | GB/T 16938-2008 | 2009-2-1 |
Gauging of hexagon sockets | GB/T 70.5-2008 | 2009-2-1 |
Connections with waisted stud - Tape classification | GB/T 13807.1-2008 | 2009-2-1 |
Terminology of fasteners - Thread fasteners pin and washer | GB/T 3099.1-2008 | 2009-2-1 |
Fasteners - Hot dip galvanized coatings | GB/T 5267.3-2008 | 2009-2-1 |
Sets of torshear type high strength bolt hexagon nut and plain washer for steel structures | GB/T 3632-2008 | 2008-7-1 |
Fastener | GB/T 18981-2008 | 2008-5-1 |
Hexagon socket set screws with dog point | GB/T 79-2007 | 2007-12-1 |
Hexagon lobular socket countersunk head screws | GB/T 2673-2007 | 2007-12-1 |
Slotted headless screws with shank | GB/T 878-2007 | 2007-12-1 |
Hexagon socket set screws with flat point | GB/T 77-2007 | 2007-12-1 |
Hexagon socket set screws with cup point | GB/T 80-2007 | 2007-12-1 |
Hexagon socket set screws with cone point | GB/T 78-2007 | 2007-12-1 |
The general technical standard for concrete nail | DB33/T 652-2007 | 2007-10-18 |
The general technical standard for floor nail | DB33/T 651-2007 | 2007-9-17 |
Hydraulic nut | JB/T 7553-2007 | 2007-9-1 |
Hexagon check nuts with full metal spring ring | JB/T 6545-2007 | 2007-9-1 |
Open End Blind Rivets with Break Pull Mandrel and Protruding Head-Property Class 30 | GB/T 12618.2-2006 | 2006-12-1 |
Open and Blind Rivets with Break Pull Mandrel and Protruding Head - Property Class 40, 41 | GB/T 12618.6-2006 | 2006-12-1 |
Open end blind rivets with break pull mandrel and countersunk head―property class 12 | GB/T 12617.3-2006 | 2006-12-1 |
Open End Blind Rivets with Break Pull Mandrel and Protruding Head - Property Class 51 | GB/T 12618.4-2006 | 2006-12-1 |
Open end blind rivets with break pull mandrel and countersunk head―property class 30 | GB/T 12617.2-2006 | 2006-12-1 |
Open end blind rivets with break pull mandrel and countersunk head―property class 51 | GB/T 12617.4-2006 | 2006-12-1 |
Open and Blind Rivets with Break Pull Mandrel and Protruding Head - Property Class 20, 21, 22 | GB/T 12618.5-2006 | 2006-12-1 |
Open and Blind Rivets with Break Pull Mandrel and Protruding Head-Property Class 12 | GB/T 12618.3-2006 | 2006-12-1 |
Open end blind rivets with break pull mandrel and countersunk head―property class 10 11 | GB/T 12617.1-2006 | 2006-12-1 |
Open End Blind Rivets with Break Pull Mandrel and Protruding Head-Property class 10, 11 | GB/T 12618.1-2006 | 2006-12-1 |
Open end blind rivets with break pull mandrel and countersunk head―property class 20 21 22 | GB/T 12617.5-2006 | 2006-12-1 |
High Strength Bolts with Large Hexagon Head for Steel Structures | GB/T 1228-2006 | 2006-11-1 |
Specifications of High Strength Bolts with Large Hexagon Head, Lar | GB/T 1231-2006 | 2006-11-1 |
High Strength Plain Washers for Steel Structures | GB/T 1230-2006 | 2006-11-1 |
High Strength Large Hexagon Nuts for Steel Structures | GB/T 1229-2006 | 2006-11-1 |
Road vehicles - Spin-on fuel filters for combustion-ignition engines - Mounting and dimensions | QC/T 767-2006 | 2006-10-11 |
Pipe type rivets | JB/T 10582-2006 | 2006-10-11 |
The technical guide for high-temperature bolt of fossil-fired power plant | DL/T 439-2006 | 2006-10-1 |
Square set screws with cup point | GB/T 84-1988 | 2006-2-1 |
Square set screws with short dog point and cone end | GB/T 86-1988 | 2005-10-1 |
closed end blind rivets with break pull mandrel and protruding head-property class 11 | GB/T 12615.1-2004 | 2004-8-10 |
Grooved pins-half-length centre grooved | GB/T 13829.4-2004 | 2004-8-10 |
Grooved pins-full-lenth parallel grooved,with pilot | GB/T 13829.1-2004 | 2004-8-1 |
Grooved pins with round head | GB/T 13829.8-2004 | 2004-8-1 |
Groovd pins-Full-length parallel grooved,with chamfer | GB/T 13829.2-2004 | 2004-8-1 |
Mechanical properties of fasteners - Blind rivets with break pull mandrel | GB/T 3098.19-2004 | 2004-8-1 |
Cross recessed hexagon head tapping screw with indentation and washer assemblies with plain washers | GB/T 9074.20-2004 | 2004-8-1 |
Mechanical properties of fasteners - Blind rivets testing | GB/T 3098.18-2004 | 2004-8-1 |
Wing nuts—Round wing | GB/T 62.1-2004 | 2004-8-1 |
Hexalobular socket raised countersunk head screws | GB/T 2674-2004 | 2004-8-1 |
Hexalobular socket raised countersunk (oval) head tapping screws | GB/T 2670.3-2004 | 2004-8-1 |
closed end blind rivets with break pull mandrel and protruding head-property class 06 | GB/T 12615.3-2004 | 2004-8-1 |
Wing nuts—Pressing wing | GB/T 62.3-2004 | 2004-8-1 |
Grooved pins-half-length reverse-taper grooved | GB/T 13829.7-2004 | 2004-8-1 |
Hexalobular socket pan head tapping screws | GB/T 2670.1-2004 | 2004-8-1 |
Groovd pins-Full-length taper grooved | GB/T 13829.5-2004 | 2004-8-1 |
Mechanical properties of fasteners - Wing nuts with specified proof torque | GB/T 3098.20-2004 | 2004-8-1 |
Grooved pins-half-length taper grooved | GB/T 13829.6-2004 | 2004-8-1 |
Closed end blind rivets with break pull mandrel and protruding head-property class 51 | GB/T 12615.4-2004 | 2004-8-1 |
Wing nuts - Square wing | GB/T 62.2-2004 | 2004-8-1 |
Cross recessed small pan head screw and washer assemblies with plain washers | GB/T 9074.5-2004 | 2004-8-1 |
Hexalobular socket cheese (short) head screws | GB/T 2671.1-2004 | 2004-8-1 |
Hexalobular socket head cap screws | GB/T 2671.2-2004 | 2004-8-1 |
Hexalobular socket countersunk head tapping screws | GB/T 2670.2-2004 | 2004-8-1 |
Closed end blind rivets with break pull mandrel and countersunk head-property class 11 | GB/T 12616.1-2004 | 2004-8-1 |
Hexalobular socket pan head screws | GB/T 2672-2004 | 2004-8-1 |
Wing nuts—Die-casting wing | GB/T 62.4-2004 | 2004-8-1 |
Hexagon bolts with flange with metric fine pitch thread - Small series | GB/T 16674.2-2004 | 2004-8-1 |
closed end blind rivets with break pull mandrel and protruding head-property class 30 | GB/T 12615.2-2004 | 2004-8-1 |
Hexagon bolts with flange—Small series | GB/T 16674.1-2004 | 2004-8-1 |
Terminology of fasteners - Blind rivets | GB/T 3099.2-2004 | 2004-8-1 |
for name plate | GB/T 827-1986 | 2003-9-1 |
Fastener | GB/T 18981-2003 | 2003-8-1 |
Cross recessed pan head drilling screws with tapping screw thread | GB/T 15856.1-2002 | 2003-6-1 |
Mechanical properties of fasteners - Drilling screws with taping screw thread | GB/T 3098.11-2002 | 2003-6-1 |
Cross recessed raised countersunk head drilling screws with tapping screw thread | GB/T 15856.3-2002 | 2003-6-1 |
Tapping screws thread | GB/T 5280-2002 | 2003-6-1 |
Plain washers for tapping sew and washer assemblies | GB/T 97.5-2002 | 2003-6-1 |
Large series-Product grade A | GB/T 96.1-2002 | 2003-6-1 |
Plain washers for screw and washer assemblies | GB/T 97.4-2002 | 2003-6-1 |
Plain washers-Product grade A | GB/T 97.1-2002 | 2003-6-1 |
Bolt or screw and washer assemblies with plain washers | GB/T 9074.1-2002 | 2003-6-1 |
Fasteners - Electroplated Coatings | GB/T 5267.1-2002 | 2003-6-1 |
Plain Washers, Chamfered-Product Grade A | GB/T 97.2-2002 | 2003-6-1 |
Cheese head studs for arc stud welding | GB/T 10433-2002 | 2003-6-1 |
Gerneral purpose bolts and screws-Radii under the head | GB/T 3105-2002 | 2003-6-1 |
Hexagon Flange Head Drilling Screws with Tapping Screw Thread | GB/T 15856.4-2002 | 2003-6-1 |
Tapping screw and washer assemblies with plain washers | GB/T 9074.18-2002 | 2003-6-1 |
Fasteners-Non-electrolytically applied zinc flake coatings | GB/T 5267.2-2002 | 2003-6-1 |
Plain washers - Product grade C | GB/T 95-2002 | 2003-6-1 |
Fasteners--Acceptance inspection | GB/T 90.1-2002 | 2003-6-1 |
Mechanical properties of fasteners--Prevailing torque type steel hexagon unts | GB/T 3098.9-2002 | 2003-6-1 |
Hexagon washer head drilling screws with tapping screw thread | GB/T 15856.5-2002 | 2003-6-1 |
Fasteners--Marking and packaging | GB/T 90.2-2002 | 2003-6-1 |
Cross recessed countersunk head drilling screws | GB/T 15856.2-2002 | 2003-6-1 |
Large series-Product grade C | GB/T 96.2-2002 | 2003-6-1 |
Plain washers-Small series-Product gradeA | GB/T 848-2002 | 2003-6-1 |
Plain washers-Extra large series-Product grade C | GB/T 5287-2002 | 2003-6-1 |
Plain washers for bolts,screws and nuts--General plan | GB/T 5286-2001 | 2002-6-1 |
Fasteners-Ends of parts with external thread | GB/T 2-2001 | 2002-4-1 |
Hexagon Nuts for Structural Bolting, Style 1, Hot-dip Galvaniz | GB/T 18230.6-2000 | 2001-5-1 |
Hexagon nuts for structural bolting-style 2,hot-dip galvanized (oversize tapped)-Product grade A-Property class 9 | GB/T 18230.7-2000 | 2001-5-1 |
Hexagon bolts for high-strength structural bolting with large width across flats(thread lengths according to GB/T 3106)-Product grade C-Property elasses 8.8 and 10.9 | GB/T 18230.1-2000 | 2001-5-1 |
Hexagon nuts for high-strength structural bolting with large width across flats-Product grade B-Property classes 8 and 10 | GB/T 18230.3-2000 | 2001-5-1 |
Plain washers for high-strength structural bolting hardened and tempered | GB/T 18230.5-2000 | 2001-5-1 |
Hexagon bolts for high-strength structural bolting with large width across flats(short thread length)-Product grade C-Property classes 8.8 and 10.9 | GB/T 18230.2-2000 | 2001-5-1 |
Hexagon nuts for structural bolting with large width across flats,style 1-Product grade B-Property class 10 | GB/T 18230.4-2000 | 2001-5-1 |
Prevailing torque type all-metal hexagon nuts,style 1 | GB/T 6184-2000 | 2001-2-1 |
Prevailing torque type all-metal hexagon nuts,style 2,with fine pitch thread | GB/T 6185.2-2000 | 2001-2-1 |
Mechanical Properties of Fasteners - Bolts, Screws and Studs | GB/T 3098.1-2000 | 2001-2-1 |
Hexagon nuts,style 2,with fine pitch thread | GB/T 6176-2000 | 2001-2-1 |
Spring-type straight pins-Slotted,heavy duty | GB/T 879.1-2000 | 2001-2-1 |
Hexagon socket set screws with cone point | GB/T 78-2000 | 2001-2-1 |
Hexagon nuts,style 1,with fine pitch thread | GB/T 6171-2000 | 2001-2-1 |
Hexagon nuts for fine mechanics | GB/T 18195-2000 | 2001-2-1 |
Essential oils and aromatic extracts - Determination of residual benzene content | GB/T 3103.1-2002 | 2001-2-1 |
Mechanical properties of fasteners-Thread rolling screws | GB/T 3098.7-2000 | 2001-2-1 |
Spring-type straight pins-Coiled,heavy duty | GB/T 879.3-2000 | 2001-2-1 |
Plain washers for clevis pins | GB/T 97.3-2000 | 2001-2-1 |
Hexagon nuts-Product grade C | GB/T 41-2000 | 2001-2-1 |
Hexagon head bolts with fine pitch thread - Full thread | GB/T 5786-2000 | 2001-2-1 |
Hexagon thin nuts (unchamfered) | GB/T 6174-2000 | 2001-2-1 |
Prevailing torque type all-metal hexagon nuts with flange with fine pitch thread | GB/T 6187.2-2000 | 2001-2-1 |
Prevailing torque type all-metal hexagon nuts,style 2-Property class 9 | GB/T 6186-2000 | 2001-2-1 |
Hexagon nuts with flange | GB/T 6177.1-2000 | 2001-2-1 |
Prevailing torque type hexagon nuts (with non-metallic insert),style 1 | GB/T 889.1-2000 | 2001-2-1 |
Countersunk slotted raised head screws (common head style) | GB/T 69-2000 | 2001-2-1 |
Spring-type straight pins-Coiled, light duty | GB/T 879.5-2000 | 2001-2-1 |
Hexagon Socket Head Cap Screw | GB/T 70.1-2000 | 2001-2-1 |
Prevaling torque type all-metal hexagon with flange | GB/T 6187.1-2000 | 2001-2-1 |
Pan head screws with cross recess | GB/T 818-2000 | 2001-2-1 |
Parallel pins with internal thread,of unhardened steel and austenitic stainless steel | GB/T 120.1-2000 | 2001-2-1 |
Hexagon Head Bolts | GB/T 5782-2000 | 2001-2-1 |
Designation system for fasteners | GB/T 1237-2000 | 2001-2-1 |
Countersunk raisde head screws (common head style) with cross recess | GB/T 820-2000 | 2001-2-1 |
Prevailing torque type hexagon nuts (with non-metallic insert),style 1,with fine pitch thread | GB/T 889.2-2000 | 2001-2-1 |
Mechanical properties of fasteners—Nuts—Coarse thread | GB/T 3098.2-2000 | 2001-2-1 |
Slottde pan head screws | GB/T 67-2000 | 2001-2-1 |
Mechanical properties of fateners - Set screws | GB/T 3098.3-2000 | 2001-2-1 |
Taper pins | GB/T 117-2000 | 2001-2-1 |
Split Pins | GB/T 91-2000 | 2001-2-1 |
Cheese head screws with cross recess | GB/T 822-2000 | 2001-2-1 |
Hexagon head bolts - Full thread - Product grade C | GB/T 5781-2000 | 2001-2-1 |
Fasteners-Surface discontinuities-Bolts,screws and studs for general requirements | GB/T 5779.1-2000 | 2001-2-1 |
Hexagon Head Bolts-Full Thread | GB/T 5783-2000 | 2001-2-1 |
Slotted cheese head screws | GB/T 65-2000 | 2001-2-1 |
Hexagon head bolts with fine pitch thread | GB/T 5785-2000 | 2001-2-1 |
Mechanical properties of fasteners-Set screws made of stainless-steel | GB/T 3098.16-2000 | 2001-2-1 |
Prevailing torque type all-metal hexagon nuts,style 2 | GB/T 6185.1-2000 | 2001-2-1 |
Mechanical properties of fasteners - Tapping screws | GB/T 3098.5-2000 | 2001-2-1 |
Prevailing torque type hexagon nuts (with non-metallic insert),style 2 | GB/T 6182-2000 | 2001-2-1 |
Hexagon Head Bolts-Product Grade C | GB/T 5780-2000 | 2001-2-1 |
Fasteners - Surface discontinuities - Nuts | GB/T 5779.2-2000 | 2001-2-1 |
Mechanical properties of fasteners-Nuts-Fine pitch thread | GB/T 3098.4-2000 | 2001-2-1 |
Hexagon thin nuts (chamfered) with fin pitch thread | GB/T 6173-2000 | 2001-2-1 |
Slotted countersunk flat head screws (common head style) | GB/T 68-2000 | 2001-2-1 |
Prevailing torque type hexagon nuts with flange (with non-metallic insert) | GB/T 6183.1-2000 | 2001-2-1 |
Tolerances for fasteners - Plain washers | GB/T 3103.3-2000 | 2001-2-1 |
Rivet shank diameters | GB/T 18194-2000 | 2001-2-1 |
Hexagon socket countersunk head screws | GB/T 70.3-2000 | 2001-2-1 |
Parallel pins with internal thread,of hardened steel and martensitic stainless steel | GB/T 120.2-2000 | 2001-2-1 |
Mechanical properties of fasteners-Preloading test for the detection of hydrogen embrittlement-Parallel bearing surface method | GB/T 3098.17-2000 | 2001-2-1 |
Mechanical properties of corrosion-resistant stainless-steel fasteners-Part 1:Bolts,screws and studs | GB/T 3098.6-2000 | 2001-2-1 |
Hexagon nuts with flange-Fine pitch thead | GB/T 6177.2-2000 | 2001-2-1 |
Hexagon nuts,style 2 | GB/T 6175-2000 | 2001-2-1 |
Hexagon thin nuts (chamfered) | GB/T 6172.1-2000 | 2001-2-1 |
Taper pins with internal thread | GB/T 118-2000 | 2001-2-1 |
Countersunk flat head screws (common head style) with cross-Part 1:Steel of property class 4.8 | GB/T 819.1-2000 | 2001-2-1 |
Parallel Pins,of unhardened steel and austenitic stainless steel | GB/T 119.1-2000 | 2001-2-1 |
Fasteners - Surface discontinities - Bolts, screws and studs for special requirements | GB/T 5779.3-2000 | 2001-2-1 |
Hexagon nuts,style 1 | GB/T 6170-2000 | 2001-2-1 |
Mechanical properties of fasteners - Widening test on nuts | GB/T 3098.14-2000 | 2001-2-1 |
Prevailing torque type hexagon nuts with flange (with non-metallic insert) with fine pitch thread | GB/T 6183.2-2000 | 2001-2-1 |
Mechanecal properties of fasteners - Nuts made of stainless-steel | GB/T 3098.15-2000 | 2001-2-1 |
Spring-type straight pins-Coiled,STANDARD duty | GB/T 879.4-2000 | 2001-2-1 |
Taper pins with external thread | GB/T 881-2000 | 2001-2-1 |
Hexalobular internal driving feature for bolts and screws | GB/T 6188-2000 | 2001-2-1 |
Specifications for riveted nuts | GB/T 17880.6-1999 | 2000-5-1 |
120℃ Small countersunk head riveted nuts | GB/T 17880.4-1999 | 2000-5-1 |
Flat head riveted nuts | GB/T 17880.1-1999 | 2000-5-1 |
Flat head hexagon riveted nuts | GB/T 17880.5-1999 | 2000-5-1 |
Countersunk head riveted nuts | GB/T 17880.2-1999 | 2000-5-1 |
Small countersunk head riveted nuts | GB/T 17880.3-1999 | 2000-5-1 |
Preventing loose bolt connecting assembly | JB/T 9150-1999 | 2000-1-1 |
Method of verification for fastenes - Size and geometry - Tapping screws | JB/T 9151.3-1999 | 2000-1-1 |
Method of verification for fastenes - Size and geometry - Rings | JB/T 9151.7-1999 | 2000-1-1 |
Method of verification for fastenes - Size and geometry - Bolts,screws,studsand nuts | JB/T 9151.1-1999 | 2000-1-1 |
Method of verification for fastenes - Size and geometry - Wood screws | JB/T 9151.2-1999 | 2000-1-1 |
Method of verification for fastenes - Size and geometry - Rivets | JB/T 9151.6-1999 | 2000-1-1 |
Method of verification for fastenes - Size and geometry - Pins | JB/T 9151.5-1999 | 2000-1-1 |
Method of verification for fastenes - Size and geometry - Washers | JB/T 9151.4-1999 | 2000-1-1 |
Cup head square neck bolts with small head and short neck-Product grade B | GB/T 801-1998 | 1999-7-1 |
Weight of Standard Fastener | JB/T 9149-1999 | 1999-4-5 |
Cross recessed countersunk flat head screws(common head style)-Grade A-Part 2: Steel of property class 8.8,stainless and non-ferrous metals | GB/T 819.2-1997 | 1998-4-1 |
Countersunk flat head screws-Part 2: Penetration depth of cross recesses | GB/T 5279.2-1997 | 1998-4-1 |
High strength bolts for joints of space grid structures | GB/T 16939-1997 | 1998-4-1 |
Fasteners―General requirements for blots,screws,studs and nuts | GB/T 16938-1997 | 1998-4-1 |
Method of tightening test for threaded fasteners | GB/T 16823.3-1997 | 1997-12-1 |
Alloy & Stainless Steel Bolts and Screws with Mj Threads General Specification | HB 7454-1997 | 1997-10-1 |
Mechanical properties of fasteners —Cone proof load test on nuts | GB/T 3098.12-1996 | 1997-7-1 |
Mechanical properties of fasteners—Torsional test and minimum torques for bolts and screws with nominal diameters 1mm to 10mm | GB/T 3098.13-1996 | 1997-7-1 |
Hexagon flange bolts--Small series | GB/T 16674-1996 | 1997-7-1 |
Stress area and bearing area for theraded fasteners | GB/T 16823.1-1997 | 1997-1-2 |
Hexagon flange head tapping screws | GB/T 16824.2-1997 | 1997-1-2 |
Hexagon head tapping screws with collar | GB/T 16824.1-1997 | 1997-1-2 |
General rules of tightening for theraded fasteners | GB/T 16823.2-1997 | 1997-1-2 |
MJ Threaded Hexagonal Head Screw | HB 7446-1996 | 1997-1-1 |
MJ Threaded Oblate Cephalic Cone Terminal Bolt | HB 7436-1996 | 1997-1-1 |
Theoretical Weight of MJ Threaded Bolt | HB 7443-1996 | 1997-1-1 |
General-purpose Insert,blind Threaded | HB 5514-1996 | 1997-1-1 |
MJ Thread Polish Rod Tolerance Zone R6 Short Thread Cross-recessed 100° Countersunk Bolt | HB 7442-1996 | 1997-1-1 |
MJ Threaded Hexagonal Head Screw | HB 7445-1996 | 1997-1-1 |
MJ Threaded Hexagonal Head Screw | HB 7447-1996 | 1997-1-1 |
MJ Threaded Raised Head Bolt | HB 7434-1996 | 1997-1-1 |
MJ Threaded Polish Rod Tolerance Zone H8 Short Thread Cross-recessed 100° Countersunk Bolt | HB 7441-1996 | 1997-1-1 |
MJ Threaded Cross Recessed Flat Head Bolt | HB 7431-1996 | 1997-1-1 |
MJ Threaded Cross Recessed Flat Head Bolt | HB 7433-1996 | 1997-1-1 |
MJ Threaded Oblate Head Screw | HB 7450-1996 | 1997-1-1 |
General-purpose Insert, Through Threaded | HB 5513-1996 | 1997-1-1 |
Technical Specification for General-purpose Wire Thread Inserts | HB 5516-1996 | 1997-1-1 |
MJ Threaded Hexagonal Head Screw | HB 7444-1996 | 1997-1-1 |
MJ Threaded Cross Slot 100° Countersunk Cone-end Bolt | HB 7440-1996 | 1997-1-1 |
MJ Threaded Polish Rod Tolerance Zone h6 Short Thread Small Hexagonal Head Bolt for Hinged Connection | HB 7430-1996 | 1997-1-1 |
MJ Threaded Cross Recessed Pan Head Screws | HB 7448-1996 | 1997-1-1 |
Specifications for drive rivets | GB/T 15855.3-1995 | 1996-8-1 |
Countersunk head drive rivets | GB/T 15855.2-1995 | 1996-8-1 |
Mechanical properties of fasteners Self-drilling tapping screws | GB/T 3098.11-1995 | 1996-8-1 |
Flat round head drive rivets | GB/T 15855.1-1995 | 1996-8-1 |
Hexagon flange head self-drilling tapping screws | GB/T 15856.4-1995 | 1996-8-1 |
Cross recessed pan head self-drilling tapping screws | GB/T 15856.1-1995 | 1996-8-1 |
Cross recessed raised countersunk head self-drilling tapping screws | GB/T 15856.3-1995 | 1996-8-1 |
Cross recessed countersunk head self-drilling tapping screws | GB/T 15856.2-1995 | 1996-8-1 |
Technical requirement for sets of torshear type high strength bolt hexagon nut and plain washer for steel structures | GB/T 3633-1995 | 1996-8-1 |
Type and dimension for sets of torshear type high strength bolt hexagon nut and plain washer for steel structures | GB/T 3632-1995 | 1996-8-1 |
Threaded rods | GB/T 15389-1994 | 1995-10-1 |
Fasteners Small Diameter Caliper for Wood Screw Threads | JB/T 7384.14-1994 | 1995-7-1 |
Fasteners Countersunk and Raised Countersunk Head Height Test Modules | JB/T 7384.2-1994 | 1995-7-1 |
Lifting Eye Nuts | JB/T 7382-1994 | 1995-7-1 |
Fasteners Test Modules for Head Height and Thickness Between the Slot and the Supporting Surface | JB/T 7384.3-1994 | 1995-7-1 |
Fasteners Test Modules for Wrenching and Screwing Height | JB/T 7384.4-1994 | 1995-7-1 |
Fasteners Plug Gauge for Slot Depth | JB/T 7384.8-1994 | 1995-7-1 |
Fasteners Caliper for the Thickness Between the Slot Bottom and the Bearing Surface of Slotted Nut | JB/T 7384.9-1994 | 1995-7-1 |
Fasteners Plug Gauge for Slot Width | JB/T 7384.7-1994 | 1995-7-1 |
Fasteners Diameter Gauge for Circumcircle of Self-tapping Locking Screws | JB/T 7384.13-1994 | 1995-7-1 |
Mechanical properties of fasteners. Prevailing torque type steel hexagon nuts | GB/T 3098.9-1993 | 1994-7-1 |
Mechanical properties of fasteners - Bolts, scrows, studs and nuts made of non-ferrous metals | GB/T 3098.10-1993 | 1994-7-1 |
12 point flange screw; bihexagonal head screw | JB/T 6686-1993 | 1994-1-1 |
12-spline Flange Nut | JB/T 6687-1993 | 1994-1-1 |
Specification for 12-spline Flange Nut and 12 Point Flange Nut | JB/T 6688-1993 | 1994-1-1 |
Strengthened cap head square neck bolts | GB/T 794-1993 | 1993-12-1 |
High-strength rail joint bolts and nuts | TB/T 2347-1993 | 1993-10-1 |
Rail joint spring lock washers | TB/T 2348-1993 | 1993-10-1 |
Connections with waisted stud. Nuts,extension sleeves | GB/T 13807.3-1992 | 1993-6-1 |
Mechanical properties of fasteners―Components for blted connections made mainly from materials with a high temperature strength | GB/T 3098.8-1992 | 1993-6-1 |
for fine mechanics - Cross recessed screws | GB/T 13806.1-1992 | 1993-6-1 |
Connections with waisted stud. Tape classification | GB/T 13807.1-1992 | 1993-6-1 |
load fatigue testing for threaded fasteners | GB/T 13682-1992 | 1993-6-1 |
weld nuts | GB/T 13680-1992 | 1993-6-1 |
weld nuts | GB/T 13681-1992 | 1993-6-1 |
Connections with waisted stud. Studs | GB/T 13807.2-1992 | 1993-6-1 |
and grooved pins - Shear test | GB/T 13683-1992 | 1993-6-1 |
Tolerances for fasteners - Components for bolted connections made mainly from materials with a high temperture strength | GB/T 3103.4-1992 | 1993-6-1 |
Grooved pins. With round head or countersunk head | GB/T 13829.3-1992 | 1993-6-1 |
Grooved pins. Taper grooved | GB/T 13829.2-1992 | 1993-6-1 |
Grooved pins | GB/T 13829.1-1992 | 1993-6-1 |
Weld nuts | GBT13680~13681-1992 | 1993-6-1 |
for fine mechanics cross recessed tapping screws - Scrape point | GB/T 13806.2-1992 | 1993-6-1 |
wall screws | GB/T 14210-1993 | 1993-1-2 |
Rule for inspection of tasteners for export | SN 0030-1992 | 1993-1-1 |
Pan Head Spiral Groove Nails | JB/T 6361.3-1992 | 1993-1-1 |
Technical Specification for Ring Groove Nail and Spiral Groove Nails | JB/T 6361.5-1992 | 1993-1-1 |
Panhead Ring Groove Nails | JB/T 6361.1-1992 | 1993-1-1 |
Countersunk Head Spiral Groove Nails | JB/T 6361.4-1992 | 1993-1-1 |
Countersunk Head Ring Groove Nails | JB/T 6361.2-1992 | 1993-1-1 |
Slotted Countersunk Head Screws | QJ 2373-1992 | 1992-11-1 |
Slotted Spherical Cheese Head Shoulder Screws | QJ 2382-1992 | 1992-11-1 |
Cup-head Screws | QJ 2386-1992 | 1992-11-1 |
Hexagon Thin Nuts | QJ 2395-1992 | 1992-11-1 |
Double End Studs | QJ 2389-1992 | 1992-11-1 |
Hexagon Nuts | QJ 2394-1992 | 1992-11-1 |
Technical Specification for Threaded Fastener Made of Brass and Aluminum Alloy - Bolts, Screws and Studs | QJ 2397.1-1992 | 1992-11-1 |
Slotted Hexagon Nuts | QJ 2396-1992 | 1992-11-1 |
Slotted Cheese Head Positioning Screw | QJ 2379-1992 | 1992-11-1 |
Slotted Spherical Large Cheese Head Screws | QJ 2383-1992 | 1992-11-1 |
Hexagon Head Bolt with Hole | QJ 2365-1992 | 1992-11-1 |
Cross Recessed Raised Countersunk Head Screws | QJ 2378-1992 | 1992-11-1 |
Butterfly Nuts | QJ 2390-1992 | 1992-11-1 |
Slotted Pan Head Screws with Waisted Shank | QJ 2380-1992 | 1992-11-1 |
Cross Recessed Pan Head Screws | QJ 2376-1992 | 1992-11-1 |
Cross Recessed Countersunk Head Screws | QJ 2377-1992 | 1992-11-1 |
Hexagon Locknuts for Non-Metal Inserts | QJ 2393-1992 | 1992-11-1 |
Cheese Head Screw with Hole | QJ 2385-1992 | 1992-11-1 |
Knurled Thumb Screws with Waisted Shank | QJ 2381-1992 | 1992-11-1 |
Slotted Set Screws with Cone Point | QJ 2374-1992 | 1992-11-1 |
Flat Raised Head Screw | QJ 2387-1992 | 1992-11-1 |
Technical Specification for Threaded Fastener Made of Brass and Aluminum Alloy - Nuts | QJ 2397.2-1992 | 1992-11-1 |
Knurled Thumb Screws | QJ 2384-1992 | 1992-11-1 |
90° Raised Countersunk Head Screws | QJ 2388-1992 | 1992-11-1 |
Cheese Head Bolt with Hole | QJ 2368-1992 | 1992-11-1 |
Slotted Cheese Head Screws | QJ 2371-1992 | 1992-11-1 |
Hexagon Head Bolts | QJ 2366-1992 | 1992-11-1 |
Cup-head Bolts | QJ 2369-1992 | 1992-11-1 |
Slotted Set Screws with Flat Point | QJ 2375-1992 | 1992-11-1 |
Eye Bolts for Hexagon Head Screw Rods | QJ 2367-1992 | 1992-11-1 |
Slotted Round Nuts | QJ 2392-1992 | 1992-11-1 |
Knurled Thumb Nuts with Collar | QJ 2391-1992 | 1992-11-1 |
Slotted Pan Head Screws | QJ 2372-1992 | 1992-11-1 |
Fasteners in British System - Heavy Type Hexagon Thick Nut | JB/DQ 1545.12-1989 | 1992-7-1 |
Fasteners in British System - Narrow Type Washer (Type N) | JB/DQ 1545.16-1989 | 1992-7-1 |
Wide Type Washer (W-type) | JB/DQ 1545.17-1989 | 1992-7-1 |
Fasteners in British System - Countersunk Bolt with Cross Recess | JB/DQ 1545.18-1989 | 1992-7-1 |
Ordinary Type Wire Thread Insert | JB/DQ 1545.21-1989 | 1992-7-1 |
Fasteners in British System - Hexagon Nut | JB/DQ 1545.11-1989 | 1992-7-1 |
Fasteners in British System - Hexagon Flat Nut | JB/DQ 1545.10-1989 | 1992-7-1 |
Fasteners in British System - Countersunk Bolt | JB/DQ 1545.19-1989 | 1992-7-1 |
Fasteners in British System - Hexagon Head Bolt (Rough) | JB/DQ 1545.13-1989 | 1992-7-1 |
Fasteners in British System - Spring Washer (Light Type) | JB/DQ 1545.15-1989 | 1992-7-1 |
Brake Washer | JB/DQ 1545.20-1989 | 1992-7-1 |
Fasteners in British System - Spring Gasket Spring Coil (Ordinary Type) | JB/DQ 1545.14-1989 | 1992-7-1 |
Nylon Insert Locking Nut and Screw Locking Part Structural Elements and Locking Torque | JB/T 5399-1991 | 1992-7-1 |
The Technical Guide for High-Temperature Bolt of Fossil-Fired Power Plant | DL 439-1991 | 1992-5-1 |
High strength bolts with large hexagon head for steel structures | GB/T 1228-1991 | 1992-1-1 |
High strength large hexagon nuts for steel structures | GB/T 1229-1991 | 1992-1-1 |
High strength plain washers for steel structures | GB/T 1230-1991 | 1992-1-1 |
Specifications of high strength bolts with large hexagon head, large hexagon nuts,plain washers for steel structures | GB/T 1231-1991 | 1992-1-1 |
120 deg flush head break mandrel blind rivets | GB/T 12617-1990 | 1991-10-1 |
Mushroom head break mandrel closed end blind rivets | GB/T 12615-1990 | 1991-10-1 |
Mushroom head break mandrel blind rivets | GB 12618-1990 | 1991-10-1 |
Specification for break mandrel blind rivets | GB/T 12619-1990 | 1991-10-1 |
120 deg flush head break mandrel closed end blind rivets | GB/T 12616-1990 | 1991-10-1 |
Weld studs for capacitor discharge welding | GB/T 902.3-1989 | 1990-1-1 |