Title |
Standard No. |
Implemented On |
Power supply technical guidelines for AC electric arc furnace. Design of power supply | NB/T 41007-2017 | |
Environmental testing for electric and electronic products. Part 2: Test methods. Test Eg: Impact, spring hammer | GB/T 2423.44-1995 | |
Environmental testing—Part 2:Test methods—Test Ff:Vibration—Time-history and sine-beat method | GB/T 2423.48-2018 | |
Information processing--ISO 7-bit and 8-bit coded character sets--Code extension techniques | GB/T 2311-1990 | |
The testing methods of peak withstand current and short-time withstand current for high-voltage apparatus | GB/T 2706-1989 | |
Environmental testing -- Part 2: Test methods -- Test Fx and guidance: Multi input multi output vibration test | GB/T 2423.62-2018 | |
Environmental testing for electric and electronic and electronic products--Part 2:Test methods--Tests A:Cold | GB/T 2423.1-2001 | |
Testing method of fault location system in plateau distribution network | GB/T 35708-2017 | |
Power supply technical guidelines for AC electric arc furnace. Power quality assessment | NB/T 41008-2017 | |
Basic environmental testing procedures for electric and electronic products—Guidance for mould growthtests | GB/T 2424.9-1990 | |
Basic environmental testing procedures for electric and electronic products--Test U: robustness of terminations and integral mounting devices | GB/T 2423.29-1982 | |
Power quality planning—General | GB/T 40597-2021 | 2022-5-1 |
Electrotechnical terminology—Micro-electromechanical devices | GB/T 2900.104-2021 | 2022-5-1 |
Guidelines for the inclusion of graphical symbols for use on electrical equipment in IEC publications | GB/T 40366-2021 | 2022-5-1 |
Guide for reliability evaluation indices of operational transmissionand transformation installation | GB/T 40862-2021 | 2022-5-1 |
Fire hazard testing for electric and electronic products—Part 2: Guidance for assessing the fire hazard—General guidelines | GB/T 5169.2-2021 | 2022-5-1 |
Technical specification for eco-design product assessment—Luminaries | GB/T 40775-2021 | 2022-5-1 |
Fire hazard testing for electric and electronic products—Part 9:Guidance for assessing the fire hazard—Preselection testing procedures—General guidelines | GB/T 5169.9-2021 | 2022-5-1 |
Assessment technical specification for eco-design product—Motor products | GB/T 40863-2021 | 2022-5-1 |
Standard data element types with associated classification scheme for electric components—Part 6: IEC Common Data Dictionary (IEC CDD) quanlity guidelines | GB/T 17564.6-2021 | 2022-3-1 |
Assessment technical specification for eco-design product—Tranformers | GB/T 40092-2021 | 2021-12-1 |
Data description of intelligent instruments - General requirements of properties database | GB/T 40216-2021 | 2021-12-1 |
Environmental testing—Part 3:Supporting documentation and guidance—Confirmation of the performance of temperature chambers | GB/T 2424.5-2021 | 2021-12-1 |
Environmental testing-Part 2:Test methods-Test R:Water test method and guidance | GB/T 2423.38-2021 | 2021-12-1 |
Environmental testing—Part 2: Test methods—Test Kb:Salt mist, cyclic(sodium chloride solution) | GB/T 2423.18-2021 | 2021-12-1 |
Life cycle assessment method for electric machine | GB/T 40100-2021 | 2021-12-1 |
Environmental testing - Part 2: Test methods - Test Kca: High concentration sulfur dioxid | GB/T 2423.33-2021 | 2021-12-1 |
Environmental testing-Part 3:Supporting documentation and guidance- Confirmation of the performance of temperature/humidity chambers | GB/T 2424.6-2021 | 2021-12-1 |
Life cycle assessment method for transformer | GB/T 40093-2021 | 2021-12-1 |
Terminology for electromagnetic shielding materials | GB/T 26667-2021 | 2021-11-1 |
Electrotechnical terminology—Electric traction | GB/T 2900.36-2021 | 2021-11-1 |
General requirements for electrostatic discharge protection management | GB/T 39587-2020 | 2021-7-1 |
Fire hazard testing for electric and electronic products—Part 29: Heat release—General guidance | GB/T 5169.29-2020 | 2021-6-1 |
Fire hazard testing for electric and electronic products—Part 30: Heat release—Summary and relevance of test methods | GB/T 5169.30-2020 | 2021-6-1 |
Fire hazard testing for electric and electronic products—Part 46: Test flames—Determination of the characteristic heat flux for ignition from a non-contacting flame source | GB/T 5169.46-2020 | 2021-6-1 |
Fire hazard testing for electric and electronic products—Part 5: Test flames—Needle-flame test method—Apparatus, confirmatory test arrangement and guidance | GB/T 5169.5-2020 | 2021-6-1 |
Immunity time testing method under voltage dip for sensitive process rated less than 1 000 V | GB/T 39227-2020 | 2021-6-1 |
Use case methodology—Part 2:Definition of the templates for use cases,actor list and requirements list | GB/T 39260.2-2020 | 2021-6-1 |
Mechanical environment reliability requirements and test methods for industrial robots | GB/T 39266-2020 | 2021-6-1 |
Electrotechnical terminology—Generation,transmission and distribution of electrical energy—Dependability and quality of service of electric power systems | GB/T 2900.103-2020 | 2021-1-1 |
Environmental testing—Part 2: Test methods—Test method and guidance: Combined temperature or temperature and humidity with low air pressure tests | GB/T 2423.27-2020 | 2021-1-1 |
Electrotechnical terminology—Active assisted living | GB/T 2900.102-2020 | 2021-1-1 |
Environmental testing—Part 2: Test methods—Test Ke: Flowing mixed gas corrosion test | GB/T 2423.51-2020 | 2021-1-1 |
Infrared temperature field distribution test method for electric heating element | NB/T 10308-2019 | 2020-5-1 |
Mnemonics and designations of symbols for measuring relays,instruments and related device | GB/Z 38128-2019 | 2020-5-1 |
Guide on inclusion of energy efficiency aspects into electrotechnical product publications | GB/T 38123-2019 | 2020-5-1 |
Identification systems enabling unambiguous information interchange—Requirements—Part 1: Principles and methods | GB/T 38000.1-2019 | 2020-3-1 |
Classification of environmental conditions—Classification of groups of environmental parameters and their severities—Part 1:Storage | GB/T 4798.1-2019 | 2020-3-1 |
Information model covering the contents of GB/T 5094.1 and GB/T 5094.2,GB/T 16679, GB/T 18656 and GB/T 16901.3 | GB/Z 37839-2019 | 2020-3-1 |
Outdoor empirical test requirements for distributed photovoltaic in warm damp climate—Part 3:Grid-connection photovoltaic system | GB/T 37663.3-2019 | 2020-1-1 |
Environmental testing—Part 2:Test methods—Test Fc: Vibration (sinusoidal) | GB/T 2423.10-2019 | 2020-1-1 |
Outdoor empirical test requirements for distributed photovoltaic in warm damp dlimate—Part 2: Photovoltaic backsheet | GB/T 37663.2-2019 | 2020-1-1 |
Outdoor empirical test requirements for distributed photovoltaic in warm damp climate—Part 1: Photovoltaic module | GB/T 37663.1-2019 | 2020-1-1 |
Fire hazard testing for electric and electronic products-Part 45:Guidance for assessing the fire hazard-Fire safety engineering | GB/T 5169.45-2019 | 2020-1-1 |
Environmental testing—Part 2:Tests and guidance—Combined climatic(temperature/humidity)and dynamic(vibration/shock) tests | GB/T 2423.35-2019 | 2020-1-1 |
Guidance on life cycle assessment for electrical and electronic products | GB/T 37552-2019 | 2020-1-1 |
Environmental testing—Part 2:Test methods—Test Ea and guidance:Shock | GB/T 2423.5-2019 | 2019-12-1 |
Environmental testing—Part 2:Test methods—Test:combined temperature(cold and heat)/low air pressure/vibration(mixed mode) | GB/T 2423.63-2019 | 2019-12-1 |
Environmental testing—Part 2:Test methods—Test Fh:Vibration, broadband random and guidance | GB/T 2423.56-2018 | 2019-7-1 |
Environmental testing—Part 2:Test methods—Test Fg:Acoustic vibration | GB/T 2423.47-2018 | 2019-7-1 |
Inspection methods for environmental testing equipments—Part 15:Hydraulic vibrating type system for vibration(sinusoidal) test | GB/T 5170.15-2018 | 2019-7-1 |
Inspection methods for environmental testing equipments—Part 13:Mechanical vibrating type system for vibration(sinusoidal)test | GB/T 5170.13-2018 | 2019-7-1 |
Maturity testing for electric and electronic products | GB/T 37143-2018 | 2019-7-1 |
Inspection methods for environmental testing equipments—Part 19:Combined temperature vibration(sinusoidal)testing equipment | GB/T 5170.19-2018 | 2019-7-1 |
Specific environmental condition—Electrical and electronic products for plateau—Part 2:Selective types and testing specification | GB/T 20626.2-2018 | 2019-7-1 |
Inspection methods for environmental testing equipments—Part 16:Centrifugal machines for constant acceleration test | GB/T 5170.16-2018 | 2019-7-1 |
Preparation of instructions for use—Structuring,content and presentation—Part 1:General principles and detailed requirements | GB/T 19678.1-2018 | 2019-7-1 |
Environmental testing—Part 2:Test methods—Test Ee and guidance:Loose cargo testing including bounce | GB/T 2423.39-2018 | 2019-7-1 |
On-site inspections method of a.c. circuit systems for 220 kV substations on plateau | GB/T 37137-2018 | 2019-7-1 |
Fire hazard testing for electric and electronic products—Part 26: Smoke obscuration—Summary and relevance of test methods | GB/T 5169.26-2018 | 2019-4-1 |
Fire hazard testing for electric and electronic products—Part 24: Guidance for assessing the fire hazard—Insulating liquids | GB/T 5169.24-2018 | 2019-4-1 |
Environmentally conscious design for electrical and electronic products | GB/T 23686-2018 | 2019-4-1 |
Fire hazard testing for electric and electronic products—Part 25:Smoke obscuration—General guidance | GB/T 5169.25-2018 | 2019-4-1 |
Graphical symbols for electrical diagrams—Part 4: Basic passive components | GB/T 4728.4-2018 | 2019-2-1 |
Industrial systems,installations and equipment and industrial products—Structuring principles and reference designations—Part 2:Classification of objects and codes for classes | GB/T 5094.2-2018 | 2019-2-1 |
Specifications for technical documentation for the conformity demonstration of electrical and electronic products with respect to the restriction of hazardous substances | GB/T 36560-2018 | 2019-2-1 |
Graphical symbols for electrical diagrams—Part 1:General information | GB/T 4728.1-2018 | 2019-2-1 |
Graphical symbols for electrical diagrams—Part 2:Symbol elements,qualifying symbols and other symbols having general application | GB/T 4728.2-2018 | 2019-2-1 |
Industrial systems,installations and equipment and industrial products—Structuring principles and reference designations—Part 1: Basic rules | GB/T 5094.1-2018 | 2019-2-1 |
Graphical symbols for electrical diagrams—Part 3:Conductors and connecting devices | GB/T 4728.3-2018 | 2019-2-1 |
Graphical symbols for electrical diagrams—Part 5:Semiconductors and electron tubes | GB/T 4728.5-2018 | 2019-2-1 |
Maintainability—Part 5:Testability and diagnostic testing | GB/T 9414.5-2018 | 2019-1-1 |
Environmental testing—Part 2:Test methods—Test and guidance:Dust and sand test for large specimen | GB/T 2423.61-2018 | 2018-12-28 |
Classification of environmental conditions—Environmental conditions appearing in nature—Temperature and humidity | GB/T 4797.1-2018 | 2018-12-1 |
General technology specifications for label conformance testing | GB/T 35969-2018 | 2018-9-1 |
Specification for the sample database of label conformance testing | GB/T 35970-2018 | 2018-9-1 |
Guide for label conformance testing | GB/T 35967-2018 | 2018-9-1 |
Fire hazard testing for electric and electronic products—Part 17: Test flames—500W flame test method | GB/T 5169.17-2017 | 2018-7-1 |
Fire hazard testing for electric and electronic products—Part 21:Abnormal heat—Ball pressure test method | GB/T 5169.21-2017 | 2018-7-1 |
Inspection methods for environmental testing equipments―Part 9:Solar radiation testing equipments | GB/T 5170.9-2017 | 2018-7-1 |
General requirements for automatic testing system of power quality monitoring equipment | GB/T 35725-2017 | 2018-7-1 |
Fire hazard testing for electric and electronic products—Part 10:Glowing/hot-wire based test methods—Glow-wire apparatus and common test procedure | GB/T 5169.10-2017 | 2018-7-1 |
Fire hazard testing for electric and electronic products―Part 16:Test flames―50 W horizontal and vertical flame test methods | GB/T 5169.16-2017 | 2018-7-1 |
Inspection methods for environmental testing equipments―Part 2:Temperature testing equipments | GB/T 5170.2-2017 | 2018-7-1 |
Performance tesing rules of parallel active power quality curing device | GB/T 35726-2017 | 2018-7-1 |
General technical requirements for eleotromagnetic shielding all-round conductive foam | GB/T 35674-2017 | 2018-7-1 |
Inspection methods for environmental testing equipments—Part 11: Corrosive gas testing equipments | GB/T 5170.11-2017 | 2018-7-1 |
Inspection methods for environmental testing equipments―Part 10:Combined high and low temperature/low air pressure testing equipments | GB/T 5170.10-2017 | 2018-7-1 |
Classification of environmental conditions―Environmental conditions appearing in nature―Air pressure | GB/T 4797.2-2017 | 2018-7-1 |
Guideline for standard voltages of medium and low voltage DC distribution system | GB/T 35727-2017 | 2018-7-1 |
Inspection methods for environmental testing equipments―Part 8:Salt mist testing equipments | GB/T 5170.8-2017 | 2018-7-1 |
Fire hazard testing for electric and electronic products―Part 14:Test flames―1 kW nominal pre-mixed flame―Apparatus,confirmatory test arrangement and guidance | GB/T 5169.14-2017 | 2018-7-1 |
Guidelines for the design of interconnected power systems | GB/Z 35728-2017 | 2018-7-1 |
Specific environmental condition - Electric and electronic products for plateau - Part 1: General technical requirements | GB/T 20626.1-2017 | 2018-4-1 |
Electrical safety terminology | GB/T 4776-2017 | 2018-2-1 |
Techaical specification of smart grid operation and control systems -- Part 2: Terminology | GB/T 33590.2-2017 | 2017-12-1 |
Economic evaluation of power quality―Part 2:Economic evaluation method for the distribution network | GB/Z 32880.2-2016 | 2017-7-1 |
Inspection methods for environmental testing equipments for electric and electronic products―Part 5:Damp heat testing equipments | GB/T 5170.5-2016 | 2017-7-1 |
Economic evaluation of power quality―Part 1:Economic evaluation method for the end-users | GB/Z 32880.1-2016 | 2017-7-1 |
Inspection methods for environmental testing equipments for electric and electronic products―Part 1:General | GB/T 5170.1-2016 | 2017-7-1 |
Environmental testing―Part 2:Testing method―Test Cab:Damp heat,steady state | GB/T 2423.3-2016 | 2017-7-1 |
Ships and offshore installations - Electrical products - Rated frequency, rated voltage and rated current | GB/T 4988-2016 | 2017-3-1 |
Power quality and quality assessment - Part 3: Methods of data collection | GB/T 32880.3-2016 | 2017-3-1 |
Material declaration for packaging of electrical and electronic products | GB/T 32882-2016 | 2017-3-1 |
Environmental standardization for electrical and electronic products and systems―Standardization of environmental aspects―Glossary of terms | GB/Z 32582-2016 | 2016-11-1 |
Power quality―Terms | GB/T 32507-2016 | 2016-9-1 |
Guide of design for recycling of electrical and electronic products | GB/T 32356-2015 | 2016-7-1 |
Standard of acceptance for wind turbine generator systems usd on plateau | GB/T 32352-2015 | 2016-7-1 |
Fire hazard testing for electric and eletronic products―Part 15:Test flames―500 W flames―Apparatus and confirmational test methods | GB/T 5169.15-2015 | 2016-5-1 |
Accelerated outdoor weathering test methods for nonmetallic materials using concentrated natural sunlight | GB/T 20236-2015 | 2016-5-1 |
Fire hazard testing for electric and electronic products―Part 41:Toxicity of fire effluent―Estimation of toxic potency―Calculation and interpretation of test results | GB/T 5169.41-2015 | 2016-5-1 |
Fire hazard testing for electric and eletronic products―Part 22:Test flames―50 W flame―Apparatus and confirmational test method | GB/T 5169.22-2015 | 2016-5-1 |
Environmental testing―Part 3:Supporting documentation and guidance―Cold and dry heat tests | GB/T 2424.1-2015 | 2016-5-1 |
Common alarm format for electric power system | GB/T 31992-2015 | 2016-4-1 |
Electrotechnical terminology―Mathematics――Functions | GB/T 2900.92-2015 | 2016-4-1 |
Electrotechnical terminology―Physics for electrotechnology | GB/T 2900.93-2015 | 2016-4-1 |
Fire hazard testing for electric and eletronic products―Part 1:Terminology concerning fire tests | GB/T 5169.1-2015 | 2016-2-1 |
Environmentally conscious design for electrical and electronic products - Materials selection | GB/T 31249-2014 | 2015-4-16 |
General requirements on environmental information of electrical and electronic products | GB/T 31250-2014 | 2015-4-16 |
Fire hazard testing for electric and electronic products―Part 34:Guidance for assessing the fire hazard―Ignitability―Summary and relevance of test methods | GB/Z 5169.34-2014 | 2015-4-1 |
Fire hazard testing for electric and electronic products―Part 33:Guidance for assessing the fire hazard―Ignitability―General guidance | GB/Z 5169.33-2014 | 2015-4-1 |
Environment specifications of wind-power generation equipments for plateau | GB/T 31140-2014 | 2015-4-1 |
Fire hazard testing for electric and electronic products―Part 38:Toxicity of fire effluent―Summary and relevance of test methods | GB/T 5169.38-2014 | 2015-4-1 |
Environmental testing - Part 2:Test methods - Guidance to test Kd:Hydrogen sulphide test for contacts and connections | GB/T 2424.12-2014 | 2015-4-1 |
Application of symbols for binary logic and analogue elements | GB/T 20295-2014 | 2015-4-1 |
Questionnaire Survey of Material declaration of electronic and electrical products Basic Guide | GB/Z 30373-2013 | 2015-3-1 |
Guidance for evaluation of products with respect to substance-use restrictions in electrical and electronic products | GB/Z 30374-2013 | 2015-3-1 |
Ships and Marine Technology - Propeller Shaft Revolution Indicators - Electric Type and Electronic Type | GB/T 30369-2013 | 2015-3-1 |
Acceptance code of new rural hyower electrification | GB/T 15659-2014 | 2015-1-9 |
Secondary Cells and Batteries Containing Alkaline or Other Non-acid Electrolytes - Secondary Lithium Cells and Batteries for Portable Applications | GB/T 30426-2013 | 2014-8-15 |
Environmental Testing - Part 2: Test Methods - Test Cx: Damp Heat, Steady State (Unsaturated Pressurized Vapour) | GB/T 2423.40-2013 | 2014-7-13 |
Fire Hazard Testing for Electric and Electronic Products - Part 9: Guidance for Assessing the Fire Hazard - Pre-selection Testing Procedures - General Guidelines | GB/T 5169.9-2013 | 2014-7-13 |
Fire Hazard Testing for Electric and Electronic Products - Part 18: Toxicity of Fire Effluent - General Guidance | GB/T 5169.18-2013 | 2014-7-13 |
Fire Hazard Testing for Electric and Electronic Products - Part 20: Surface Spread of Flame - Summary and Relevance of Test Methods | GB/T 5169.20-2013 | 2014-7-13 |
Fire Hazard Testing for Electric and Electronic Products - Part 2: Guidance for Assessing the Fire Hazard - General Guidelines | GB/T 5169.2-2013 | 2014-7-13 |
Environmental testing—Part 2:Test methods—Test XA and guidance:Immersion in cleaning solvents | GB/T 2423.30-2013 | 2014-6-14 |
Power Quality - Voltage Dips and Short Interruptions | GB/T 30137-2013 | 2014-5-10 |
General specification for industrial electromagnetic shielding fabric | GB/T 30139-2013 | 2014-5-10 |
Electrotechnical terminology—Electrical insulating solids,liquids and gases | GB/T 2900.5-2013 | 2014-4-9 |
Basic principles for graphical symbols for use on electrical equipment―Part 1: Creation of graphical symbols for registration | GB/T 23371.1-2013 | 2014-4-9 |
Fire Hazard Testing for Electric and Electronic Products - Part 12: Glowing/Hot-wire Based Test Methods - Glow-wire Flammability Index (GWFI) Test Method for Materials | GB/T 5169.12-2013 | 2014-4-9 |
Fire hazard testing for electric and electronic products—Part 42:Test flames—Confirmatory tests—Guidance | GB/Z 5169.42-2013 | 2014-4-9 |
Standard data element types with associated classification scheme for electric components―Part 2:EXPRESS dictionary schema | GB/T 17564.2-2013 | 2014-4-9 |
Electrotechnical terminology—Time relays | GB/T 2900.64-2013 | 2014-4-9 |
Fire hazard testing for electric and electronic products - Part 13: Basic test methods for glowing filament/hot wire - Test methods for glow wire ingnition temperature (GWIT) | GB/T 5169.13-2013 | 2014-4-9 |
Fire Hazard Testing for Electric and Electronic Products - Part 44: Guidance for Assessing the Fire Hazard - Fire Hazard Assessment | GB/T 5169.44-2013 | 2014-4-9 |
Electrotechnical Terminology - Electric Cables | GB/T 2900.10-2013 | 2014-4-9 |
Fire Hazard Testing for Electric and Electronic Products - Part 32: Heat Release - Heat Release of Insulating Liquids | GB/Z 5169.32-2013 | 2014-4-9 |
Environmental testing—Part 2:Test methods—Wind pressure | GB/T 2423.41-2013 | 2014-3-7 |
Environmental testing - Part 2:Test methods - Test Q: Sealing | GB/T 2423.23-2013 | 2014-3-7 |
Environmental testing—Part 2:Test methods—Test Kc:Sulphur dioxide test for contacts and connections | GB/T 2423.19-2013 | 2014-3-7 |
Enviromental testing—Part 2:Test methods—Test Sa:Simulated solar radiation at ground level and guidance for solar radiation testing | GB/T 2423.24-2013 | 2014-3-7 |
Environmental testing―Part 2:Test methods―Guidance to test Kc:Sulphur dioxide test for contacts and connections | GB/T 2424.11-2013 | 2014-3-7 |
Environmental testing―Supporting documentation and guidance―Calculation of uncertainty of conditions in climatic test chambers | GB/T 2424.27-2013 | 2014-3-7 |
Environmentally conscious design guide for electrical cables and wires | GB/T 29782-2013 | 2014-2-1 |
Technical specification of the temperature & humidity control system for the mobile laboratory | GB/T 29600-2012 | 2013-7-31 |
Environmental testing - General guidance of accelerated testing for atmospheric corrosion | GB/T 2424.10-2012 | 2013-6-1 |
Environmental testing - Part 2: Test methods - Test Z/AD: Composite temperature/humidity cyclic test | GB/T 2423.34-2012 | 2013-6-1 |
Accelerated stress testing procedures for electric and electronic products—Guidance for highly accelerated life test | GB/T 29309-2012 | 2013-6-1 |
Environmental testing - Part 2: Tests methods - Test N: Change of temperature | GB/T 2423.22-2012 | 2013-6-1 |
Maintainability of equipment—Part 3:Verification and collection,analysis and presentation of data | GB/T 9414.3-2012 | 2013-6-1 |
Environmental testing - Part 2: Test methods - Test Z/ABDM: Climatic sequence | GB/T 2423.45-2012 | 2013-6-1 |
Maintainability of equipment—Part 2:Maintainability requirements and studies during the design and development phase | GB/T 9414.2-2012 | 2013-6-1 |
Intelligrid methodology for developing requirements for energy systems | GB/Z 28805-2012 | 2013-5-1 |
Environmental testing - Part 2: Test methods - Test Kb: Salt mist, cyclic (sodium chloride solution) | GB/T 2423.18-2012 | 2013-2-1 |
Environmental testing - Part 2: Test methods - Test Cy: Damp heat,steady state,accelerated test primarily intended for components | GB/T 2423.50-2012 | 2013-2-1 |
Method of the measuring environmental parameters for electric and electronic products - Part 2:Salt mist | GB/T 10593.2-2012 | 2013-2-1 |
Environmental testing - Part 2: Test methods - Test Ke: Flowing mixed gas corrosion test | GB/T 2423.51-2012 | 2013-2-1 |
Guide for Modeling Generator Excitation System | DL/T 1167-2012 | 2012-12-1 |
Power Quality Terms | DL/T 1194-2012 | 2012-12-1 |
Metal-oxide Varistors for Series Capacitor Banks | DL/T 1156-2012 | 2012-12-1 |
Terminology for Flexible Power Transmission | DL/T 1193-2012 | 2012-12-1 |
Environmentally conscious design for electrical and electronic product—Indentification of environmental aspects | GB/T 28179-2011 | 2012-6-1 |
Guide of eco-design for power and distribution transformers | GB/T 28180-2011 | 2012-6-1 |
Terminology for electromagnetic shielding materials | GB/T 26667-2011 | 2011-12-1 |
Electrotechnical terminology - Organisation/market of electricity | GB/T 2900.87-2011 | 2011-12-1 |
Guide of eco-design for medium and small size electric motors | GB/T 26670-2011 | 2011-12-1 |
Environmentally conscious design for electrical and electronic products - Glossary | GB/T 26669-2011 | 2011-12-1 |
Classification and designation of documents for plants, systems and equipment - Part 1: Rules and classification tables | GB/T 26853.1-2011 | 2011-12-1 |
Requirements concerning the interoperability between electromechanical and electrical applications in CAx-systems | GB/T 26852-2011 | 2011-12-1 |
Material declaration of electronic and electrical products | GB/Z 26668-2011 | 2011-12-1 |
Standardising the characteristics of electricity | GB/Z 26854-2011 | 2011-12-1 |
Standard data element types with associated classification scheme for electric items - Part 1: Definitions - Principles and methods | GB/T 17564.1-2011 | 2011-12-1 |
Guide for environmentally conscious design assessment of electrical and electronic products | GB/T 26671-2011 | 2011-12-1 |
Electrotechnical terminology - Ultrasonics | GB/T 2900.88-2011 | 2011-12-1 |
Environmental climatic conditions appearing in different altitudes for electrical products | GB/T 14597-2010 | 2011-5-1 |
Guide of environmental design for electrical accessories—Part 6:Appliance couplers for household and similar purposes | GB/T 24976.6-2010 | 2011-2-11 |
Guide of environmental design for electrical accessories—Part 5:Plugs and socket-outlets for household and similar purposes | GB/T 24976.5-2010 | 2011-2-1 |
Guide of environmental design for low-voltage apparatus—Part 2:Disconnectors | GB/T 24975.2-2010 | 2011-2-1 |
Guide of environmental design for low-voltage apparatus - Part 6: Button lamp | GB/T 24975.6-2010 | 2011-2-1 |
Guide of environmental design for low-voltage apparatus—Part 1:General rules | GB/T 24975.1-2010 | 2011-2-1 |
Guide of environmental design for electrical accessories—Part 4:Plugs,socket-outlets and couplers for industrial purposes | GB/T 24976.4-2010 | 2011-2-1 |
Guide of environmental design for electrical accessories—Part 2:Cable conduiting system and cable trunking and ducting system for cable management | GB/T 24976.2-2010 | 2011-2-1 |
Guide of environmental design for electrical accessories—Part 1:General rules | GB/T 24976.1-2010 | 2011-2-1 |
Guide of environmental design for low-voltage apparatus—Part 4:Contact | GB/T 24975.4-2010 | 2011-2-1 |
Guide of environmental design for electrical accessories—Part 3:Cable reels for household application and similar purposes | GB/T 24976.3-2010 | 2011-2-1 |
Guide of environmental design for electrical accessories—Part 8:Switches for household and similar fixed electrical installations | GB/T 24976.8-2010 | 2011-2-1 |
Guide of environmental design for electrical accessories—Part 7:Connecting devices for low-voltage circuits for household and similar purposes | GB/T 24976.7-2010 | 2011-2-1 |
Guide of environmental design for low-voltage apparatus—Part 2:Disconnectors | GB/T 24975.3-2010 | 2011-2-1 |
Guide of environmental design for low-voltage apparatus—Part 5:Fuse | GB/T 24975.5-2010 | 2011-2-1 |
Guide of environmental design for low-voltage apparatus—Part 7:Terminal blocks | GB/T 24975.7-2010 | 2011-2-1 |
Coding for voltage class | DL/T 396-2010 | 2010-10-1 |
Type completion method of electric and electronic products for plateau | JB/T 11039-2010 | 2010-7-1 |
Power quality—Interharmonics in public supply network | GB/T 24337-2009 | 2010-6-1 |
Guide of eco - Design for energy - using products | GB/T 23688-2009 | 2009-12-20 |
Guide of environmentally conscious design for ICT & CE products | GB/T 23687-2009 | 2009-12-1 |
Environmentally conscious design guide for electrical and electronic products | GB/T 23686-2009 | 2009-12-1 |
Guide of environmentally conscious declaration for ICT & CE products | GB/T 23689-2009 | 2009-12-1 |
Procedure for the declaration of materials in products of the electrotechnical and electronic industry | GB/T 23690-2009 | 2009-12-1 |
Electrotechnical terminology - Tariffs for electricity | GB/T 2900.84-2009 | 2009-11-1 |
Inspection methods for basic parameters of environmental testing equipments for electric and electronic products—Electrodynamic vibrating type machines for vibration(sinusoidal)test | GB/T 5170.14-2009 | 2009-11-1 |
Environmental testing - Part 2: Tests - Test U: Robustness of terminations and integral mounting devices | GB/T 2423.60-2008 | 2009-11-1 |
Environmental testing - Part 2: Test methods - Test Z/ABMFh: Combined temperature (cold and heat)/low air pressure/vibration (random) | GB/T 2423.59-2008 | 2009-11-1 |
Electrotechnical terminology - Measuring relays | GB/T 2900.17-2009 | 2009-11-1 |
Standard data element types with associated classification scheme for electric components - Part 4: IEC reference collection of standard data element types and component classes | GB/T 17564.4-2009 | 2009-11-1 |
Electrotechnical terminology - Insulators | GB/T 2900.8-2009 | 2009-11-1 |
Classification of environmental conditions - Environmental conditions of nature - Earthquake vibration and shock | GB/T 4797.7-2008 | 2009-11-1 |
Basic principles for graphical symbols for use on electrical equipment - Part 3: Guidelines for the application of graphical symbols | GB/T 23371.3-2009 | 2009-11-1 |
Environmental testing - Part 2: Tests methods guidance on - Test T: Soldering Test | GB/T 2424.17-2008 | 2009-11-1 |
Graphical symbols for use on electrical equipment - Part 1: Overview and classification | GB/T 5465.1-2009 | 2009-11-1 |
Guidelines for the addition of environmental aspects in product standards specific to electrical accessories | GB/Z 22695-2008 | 2009-11-1 |
Electrotechnical terminology - Mathematics - General concepts and linear algebra | GB/T 2900.85-2009 | 2009-11-1 |
Inspection methods for basic parameters of environmental testing equipments - Hydraulic vibrating type machines for vibration (random) test | GB/T 5170.21-2008 | 2009-11-1 |
Basic principles for graphical symbols for use on electrical equipment - Part 2: Form and use of arrows | GB/T 23371.2-2009 | 2009-11-1 |
Code for designation of colours | GB/T 13534-2009 | 2009-11-1 |
Classification of environmental conditions - Environmental conditions of nature - Precipitation and wind | GB/T 4797.5-2008 | 2009-11-1 |
Rules for the presentation of graphical symbols - Graphical symbols for use in the technical documentation of products - Part 3: Classification of connect notes networks and their en | GB/T 16901.3-2009 | 2009-11-1 |
Electrotechnical terminology - Acoustics and electroacoustics | GB/T 2900.86-2009 | 2009-11-1 |
Environmental testing - Part 2: Test methods - Test J and guidance: Mold growth | GB/T 2423.16-2008 | 2009-10-1 |
Fire hazard testing for electric and electronic products - Part 29: Heat release - General guidance | GB/T 5169.29-2008 | 2009-10-1 |
Fire hazard testing for electric and electronic products - Part 30: Heat release - Summary and relevance of test methods | GB/T 5169.30-2008 | 2009-10-1 |
Environmental testing - Part 2: Tests methods - Test Z/AM: Combined cold/low air pressure tests | GB/T 2423.25-2008 | 2009-10-1 |
Fire hazard testing for electric and electronic products - Part 24: Guidance for assessing the fire hazard - Insulating liquids | GB/T 5169.24-2008 | 2009-10-1 |
Fire hazard testing for electric and electronic products - Part 27: Smoke obscuration - Small-scale static test - Description of the apparatus | GB/T 5169.27-2008 | 2009-10-1 |
Environmental testing - Supporting documentation and guidance - Selecting amongst vibration tests | GB/T 2424.26-2008 | 2009-10-1 |
Environmental testing - Part 2: Test methods - Tests B: Dry heat | GB/T 2423.2-2008 | 2009-10-1 |
Fire hazard testing for electric and electronic products - Part 28: Smoke obscuration - Small-scale static test - Materials | GB/T 5169.28-2008 | 2009-10-1 |
Environmental testing - Part 2: Tests methods - Test Z/BM: Combined dry heat/low air pressure tests | GB/T 2423.26-2008 | 2009-10-1 |
Fire hazard testing for electric and electronic products - Part 5: Test flames - Needle test method - Apparatus confirmatory arrangement and guidance | GB/T 5169.5-2008 | 2009-10-1 |
Fire hazard testing for electric and electronic products - Part 25: Smoke obscuration - General guidance | GB/T 5169.25-2008 | 2009-10-1 |
Fire hazard testing for electric and eletronic products - Part 31: Surface spread of flame - General guidance | GB/T 5169.31-2008 | 2009-10-1 |
Fire hazard testing for electric and electronic products - Part 23: Test flames - 500W vertical flame test method for tubular polymeric materials | GB/T 5169.23-2008 | 2009-10-1 |
Fire hazard testing for electric and electronic products - Part 26: Smoke obscuration - Summary and relevance of test methods | GB/T 5169.26-2008 | 2009-10-1 |
Environmental testing - Guide for combined temperature/low air pressure tests | GB/T 2424.15-2008 | 2009-10-1 |
Environmental testing - Part 2: Test methods - Test M: Low air pressure | GB/T 2423.21-2008 | 2009-10-1 |
Electrotechnical terminology - Generation transmission and distribution of electricity - Substations | GB/T 2900.59-2008 | 2009-5-1 |
Electrotechnical terminology - Equipment for explosive atmospheres | GB/T 2900.35-2008 | 2009-5-1 |
Power quality—Three-phase voltage | GB/T 15543-2008 | 2009-5-1 |
Electrotechnical terminology - Fundamental terms | GB/T 2900.1-2008 | 2009-5-1 |
Electrotechnical terminology - Generation transmission and distribution of electricity - Generation | GB/T 2900.52-2008 | 2009-5-1 |
Electrotechnical terminology - Generation transmission and distribution of electricity - Operation | GB/T 2900.57-2008 | 2009-5-1 |
Power quality - Deviation of supply voltage | GB/T 12325-2008 | 2009-5-1 |
Electrotechnical terminology - Control technology | GB/T 2900.56-2008 | 2009-5-1 |
Electrotechnical terminology - Generation transmission and distribution of electricity - Power system planning and management | GB/T 2900.58-2008 | 2009-5-1 |
Electrotechnical terminology - Generation transmission and distribution of electricity - General | GB/T 2900.50-2008 | 2009-5-1 |
Electrotechnical terminology - Primary and secondary cells and batteries | GB/T 2900.41-2008 | 2009-5-1 |
Electrotechnical engineering drawings rules of CAD | GB/T 18135-2008 | 2009-5-1 |
Electrotechnical terminology - Electrical and magnetic devices | GB/T 2900.83-2008 | 2009-5-1 |
Electrotechnical terminology - Dependability and quality of service | GB/T 2900.13-2008 | 2009-4-1 |
Electrical installations for outdoor Sites under heavy conditions - Part 1: Scope and definitions | GB/T 9089.1-2008 | 2009-3-1 |
Environmental testing for electric and electronic products - Part 2: Test methods - Test R: Water test method and guidance | GB/T 2423.38-2008 | 2009-3-1 |
Inspection methods for environmental testing equipments for electric and electronic products - Combined high and low temperature/low air pressure testing equipments | GB/T 5170.10-2008 | 2009-3-1 |
Inspection methods for environmental testing equipments for electric and electronic products - General | GB/T 5170.1-2008 | 2009-3-1 |
Inspection methods for environmental testing equipments for electric and electronic products—Salt mist testing equipments | GB/T 5170.8-2008 | 2009-3-1 |
Inspection methods for environmental testing equipments for electric and electronic products - Damp heat testing equipments | GB/T 5170.5-2008 | 2009-3-1 |
Environmental testing for electric and electronic products - Part 2: Test methods - Test Ff: Vibration- Time-history method | GB/T 2423.48-2008 | 2009-3-1 |
Inspection methods for environmental testing equipments for electric and electronic products - Temperature testing equipments | GB/T 5170.2-2008 | 2009-3-1 |
Environmental testing for electric and electronic products - Part 2: Test methods - Test Ee: Bounce | GB/T 2423.39-2008 | 2009-3-1 |
Inspection methods for environmental testing equipments for electric and electronic products - Corrosive gas testing equipments | GB/T 5170.11-2008 | 2009-3-1 |
Graphical Symbols for Diagrams - Part 12: Binary Logic Elements | GB/T 4728.12-2008 | 2009-1-1 |
Graphical Symbols for Diagrams - Part 13: Analogue Elements | GB/T 4728.13-2008 | 2009-1-1 |
Electrotechnical terminology - Physics and chemistry | GB/T 2900.61-2008 | 2009-1-1 |
Graphical Symbols for Use on Electrical Equipment - Part 2: Graphical Symbols | GB/T 5465.2-2008 | 2009-1-1 |
Fire hazard testing for electric and eletronic products - Part 15: Test flames - 500W flames - Apparatus and confirmational test methods | GB/T 5169.15-2008 | 2009-1-1 |
Graphical symbols for diagrams - Part 10: Telecommunications: Transmission | GB/T 4728.10-2008 | 2009-1-1 |
Fire hazard testing for electric and electronic products - Part 16: Test flames - 50W horizontal and vertical flame test methods | GB/T 5169.16-2008 | 2009-1-1 |
Electrotechnical terminology - Small-power motor | GB/T 2900.27-2008 | 2009-1-1 |
Fire hazard testing for electric and electronic products - Part 17: Test flames - 500W flame test methods | GB/T 5169.17-2008 | 2009-1-1 |
Electrotechnical terminology - Earthing and protection against electric shock | GB/T 2900.73-2008 | 2009-1-1 |
Environmental testing for electric and electronic products - Part 2: Test methods - Mounting of specimens for vibration impact and similar dynamic tests | GB/T 2423.43-2008 | 2009-1-1 |
Graphical symbols for diagrams - Part 7: Switchgear, control gear and protective devices | GB/T 4728.7-2008 | 2009-1-1 |
Environmental testing for electric and electronic products - Part 2: Test method - Test Db: Damp heat,cyclic ( 12h+12h cycle) | GB/T 2423.4-2008 | 2009-1-1 |
Envrionmental testing for electric and electronic products - Part 2: Test method - Test Ka: Salt mist | GB/T 2423.17-2008 | 2009-1-1 |
Fire hazard testing for electric and eletronic products - Part 22: Test flames - 50W flames - Apparatus and confirmational test methods | GB/T 5169.22-2008 | 2009-1-1 |
Environmental testing for electric and electronic products - Part 2: Tests - Test Ei: Shock - Shock response spectrum synthesis | GB/T 2423.57-2008 | 2009-1-1 |
Environmental testing for electric and electronic products - Part 2: Tests -Test Fi: Vibration - Mixed Mode | GB/T 2423.58-2008 | 2009-1-1 |
Graphical Symbols for Diagrams - Part 9: Telecommunications: Switching and Peripheral Equipment | GB/T 4728.9-2008 | 2009-1-1 |
Graphical Symbols for Diagrams - Part 8: Measuring Instruments, Lamps and Signaling Devices | GB/T 4728.8-2008 | 2009-1-1 |
Electrotechnical terminology - Polyphase systems and circuits | GB/T 2900.72-2008 | 2009-1-1 |
Graphical symbols for diagrams - Part 11: Architectural and topographical installation plans and diagrams | GB/T 4728.11-2008 | 2009-1-1 |
Electrotechnical terminology - Circuit theory | GB/T 2900.74-2008 | 2009-1-1 |
Graphical symbols for diagrams - Part 6: Production and conversion of electrical energy | GB/T 4728.6-2008 | 2009-1-1 |
Environmental testing for electric and electronic products - Part 2: Test methods - Test: combined temperature (cold and heat)/low air pressure/vibration (sinusoidal) | GB/T 2423.102-2008 | 2008-12-1 |
Specific environment condition - Environmental test methods - Part 2: Artificial environment test method and guidance - Electric and electronic products (including communication prod | GB/T 20643.2-2008 | 2008-12-1 |
Environmental testing for electric and electronic products - Part 2: Test methods - Test: inclinations and swings | GB/T 2423.101-2008 | 2008-12-1 |
Electrical safety terminology | GB/T 4776-2008 | 2008-12-1 |
Preparation of documents used in electrotechnology - Part 1: Rules | GB/T 6988.1-2008 | 2008-11-1 |
Environmental testing for electric and electronic products - Part 2: Test methods - Test Ta: Solderability test by the wetting balance method | GB/T 2423.32-2008 | 2008-10-1 |
Environmental testing for electric and electronic products - Part 2: Tests methods - Test Fc: Vibration (sinusoidal) | GB/T 2423.10-2008 | 2008-10-1 |
Environmental testing for electric and electronic products - Part 2: Test methods - Test Ga and guidance: Acceleration steady | GB/T 2423.15-2008 | 2008-10-1 |
Electrotechnical terminology - Electrical installations | GB/T 2900.71-2008 | 2008-10-1 |
Electrotechnical terminology - Electrical accessories | GB/T 2900.70-2008 | 2008-9-1 |
Inspection methods for environmental testing equipments for electric and electronic products - Solar radiation testing equipments | GB/T 5170.9-2008 | 2008-9-1 |
Environmentally conscious design - Integrating environmental aspects into design and development of electrotechnical products | GB/T 21273-2007 | 2008-6-1 |
Fire hazard testing for electric and eletronic products—Part 1:Terminology concerning fire tests | GB/T 5169.1-2007 | 2008-3-1 |
Fire hazard testing for electric and eletronic products—Part 14:Test flames—1 kW nominal pre-mixed flame—Apparatus confirmatory test arrangement and guidance | GB/T 5169.14-2007 | 2008-3-1 |
Rated voltages for medium frequency equipment | GB/T 3926-2007 | 2008-3-1 |
Standard voltage | GB/T 156-2007 | 2008-3-1 |
Basic principles for graphical symbols for use on electrical equipment—Part 1:Creation of symbol originals | GB/T 5465.11-2007 | 2008-1-1 |
Standard data element types with associated classification scheme for electric components—Part 5:Extensions to the EXPRESS dictionary schema | GB/T 17564.5-2007 | 2008-1-1 |
Environmental tests for electric and electronic products - Confirmation of the performance of temperature chambers | GB/T 2424.5-2006 | 2007-9-1 |
Fire hazard testing for electric and electronic products - Part 10: Glow/hot-wire based test methods - Glow-wire apparatus and common test procedure | GB/T 5169.10-2006 | 2007-9-1 |
Environmental testing for electric and electronic products - Part 2: Test methods - Test L: Dust and sand | GB/T 2423.37-2006 | 2007-9-1 |
Fire hazard testing for electric and electronic products - Part 11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products | GB/T 5169.11-2006 | 2007-9-1 |
Environmental testing for electric and electronic products - Confirmation of the performance of temperature/humidity chambers | GB/T 2424.6-2006 | 2007-9-1 |
Environmental conditions appearing in nature for electric and electronic products - Solar radiation and temperature | GB/T 4797.4-2006 | 2007-9-1 |
Environmental tests for electric and electronic products - Measurements in temperature chambers for tests A and tests B (with load) | GB/T 2424.7-2006 | 2007-9-1 |
Environmental testing for electric and electronic products - Part 2: Testing method test Cab: Damp heat Steady state | GB/T 2423.3-2006 | 2007-9-1 |
Fire hazard testing for electric and eletronic products - Part 21: Abnormal heat - Ball pressure test | GB/T 5169.21-2006 | 2007-9-1 |
Special environmental condition - Environmental test method - Part 3: Artificial environmental test method and guidance - Polymer material | GB/T 20643.3-2006 | 2007-4-1 |
Special environment condition - Technical requirements of high voltage apparatus used for plateau | GB/T 20635-2006 | 2007-4-1 |
Special environmental condition - Environmental test method - Part 1: General and guidance | GB/T 20643.1-2006 | 2007-4-1 |
Special environmental condition - Terminology | GB/T 20625-2006 | 2007-4-1 |
Specific environmental condition - Electric and electronic products for plateau - Part 1: General technical requirements | GB/T 20626.1-2006 | 2007-4-1 |
Specific environmental condition - Electrical and electronic products for plateau - Part 2: Selective types and testing specification | GB/T 20626.2-2006 | 2007-4-1 |
Specific environmental condition - Electric and electronic products for plateau - Part 3: Protection requiremrnt of thunder and lightning filth condensation | GB/T 20626.3-2006 | 2007-4-1 |
Guide for partial discharge measuring of power equipment | DL/T 417-2006 | 2007-3-1 |
Code for designing of radio stations against effects from Power transmission lines | DL/T 5040-2006 | 2007-3-1 |
Preparation of documents used in electrotechnology - Part 5: Index | GB/T 6988.5-2006 | 2007-1-1 |
Application of GB/T4728.12 and GB/T4728.13 standards | GB/T 20295-2006 | 2007-1-1 |
Electrotechnical terminology--Special equipment for electro-ceramics | JB/T 10587-2006 | 2006-10-11 |
Guide for insulation test on site insulation resistance、 dielectric absorption ratio and polarization index test | DL/T 474.1-2006 | 2006-10-1 |
Guide for insulation test on site DC high voltage test | DL/T 474.2-2006 | 2006-10-1 |
Guide for insulation test on site dielectric dissipation factor test | DL/T 474.3-2006 | 2006-10-1 |
Guide for insulation test on site lightning arrester tests | DL/T 474.5-2006 | 2006-10-1 |
Guide for insulation test on site AC voltage withstanding test | DL/T 474.4-2006 | 2006-10-1 |
Fire hazard testing for electric and electronic products - Part 19: Abnormal heat - Mould stress relief distortion test | GB/T 5169.19-2006 | 2006-9-1 |
Inspection methods for basic paratmeters of environmental testing equipments for electric and electronic products - Composite temperature/humidity cyclic testing equipments | GB/T 5170.18-2005 | 2006-6-1 |
Environmental testing for electric and electronic products - Part 2: Test methods - Test Eh: hammer tests | GB/T 2423.55-2006 | 2006-6-1 |
Environment tests for electric and electronic products - Guidance for damp heat tests | GB/T 2424.2-2005 | 2006-6-1 |
Environmental conditions for electric ans electronic products appearing in nature - Part 2: Altitude and air pressure, deepness and water pressure | GB/T 4797.2-2005 | 2006-4-1 |
Standard frequencues | GB/T 1980-2005 | 2006-4-1 |
Environmental testing for electric and electronic products Part 2: Test methods Test R: Water test methods and guidelines | GB/T 2423.38-2005 | 2006-4-1 |
Inspection methods for basic parameters of environmental testing equipments for electric and electronic products - Combined sequential cold low air pressure and damp heat testing equ | GB/T 5170.17-2005 | 2006-4-1 |
Basic environmental testing procedures for electric and electronic products - Part2: Test methods - Test T: Soldering | GB/T 2423.28-2005 | 2006-4-1 |
Standard data element types with associated classification scheme for electric components―Part 1: Definitions―Principles and methods | GB/T 17564.1-2005 | 2006-4-1 |
Inspection methods for basic parameters of environmental testing equipments for electric and electronic products - Combined temperature/vibration (sinusoidal) testing equipment | GB/T 5170.19-2005 | 2006-4-1 |
Electrotechnical terminology - Electric welding machine | GB/T 2900.22-2005 | 2006-4-1 |
Environmental testing for electric and electronic products - Part 2: Test Methods - Test Z/AFc: Combined cold/vibration (sinusoidal) tests for both heat-dissipating and non-heat-diss | GB/T 2423.35-2005 | 2006-4-1 |
Inspection methods for basic parameters of environmental testing equipments for electric and electronic products - Water testing equipments | GB/T 5170.20-2005 | 2006-4-1 |
Environmental testing for electric and electronic products - Part 2: Test Methods - Test Z/BFc: Combined dry heat/vibration (vibration) (sinusoidal) tests for both heat-dissipating a | GB/T 2423.36-2005 | 2006-4-1 |
Environmental testing for electric and electronic products - Part 2: Test Methods Test Z/AMD: Combined sequential cold, low air pressure and damp heat test | GB/T 2423.27-2005 | 2006-4-1 |
Measuring methods of environmental parameters for electric and electronic products - Part 1: Vibration | GB/T 10593.1-2005 | 2006-4-1 |
Industrial systems, installations and equipment and industrial products - Structuring principles and reference designations - Part 3: Application guidelines | GB/T 5094.3-2005 | 2005-12-1 |
Environment tests for electric and electronic porducts - Guidance on the application of the environmental test to simulate the effects of storage | GB/T 2424.19-2005 | 2005-8-1 |
Encironmental condition for electric and electronic products - Terminologies | GB/T 11804-2005 | 2005-8-1 |
Environmental conditions appearing in nature of electric and electronic products - Temperature and humidity | GB/T 4797.1-2005 | 2005-8-1 |
Graphical symbols for electrical diagrams - Part 4: Basic passive components | GB/T 4728.4-2005 | 2005-8-1 |
Environmental conditions existing in the application of electric and electronic products - Section 1: Storage | GB/T 4798.1-2005 | 2005-8-1 |
Graphical symbols for diagrams - Part 5: Semiconductors and electron tubes | GB/T 4728.5-2005 | 2005-8-1 |
Information technology - Coded graphic character set for use in the Preparation of documents used in electrotechnology and for information interchange | GB/T 19679-2005 | 2005-8-1 |
Graphical symbols for electrical diagrams - Part 3: Conductors and connecting devices | GB/T 4728.3-2005 | 2005-8-1 |
Graphical Symbols for Electrical Diagrams - Part 1: General Information | GB/T 4728.1-2005 | 2005-8-1 |
Environmental testing for electric and electronic products - Guidance for high temperature and low temperature tests | GB/T 2424.1-2005 | 2005-8-1 |
Graphical symbols for electrical diagrams - Part 2: Symbol elements, qualifying symbols and other symbols having general application | GB/T 4728.2-2005 | 2005-8-1 |
Industrial sysytems - Installations and equipment and industrial products - Structuring principles and reference designations - Part 4: Discussion of concepts | GB/T 5094.4-2005 | 2005-8-1 |
Inspection methods for basic parameters of environmental testing equipments for electric and electronic products - Mechanical vibrating type machines for vibration (sinusoidal) test | GB/T 5170.13-2005 | 2005-8-1 |
Inspection methods for parameters of environmental testing equipments for electic and electronic products - Centrifugal machines for constant acceleration test | GB/T 5170.16-2005 | 2005-8-1 |
Inspection methods for basic parameters of environmental testing equipments for electric and electronic products - Hydraulic vibrating type machines for vibration (sinusoidal) test | GB/T 5170.15-2005 | 2005-8-1 |
Preparation of Instructions - Structuring, Content and Presentation | GB/T 19678-2005 | 2005-8-1 |
Environmental testing for electronic products - Part2: Test method - Test Kca: High concentration sulfur dioxide | GB/T 2423.33-2005 | 2005-8-1 |
The drawing rules of electrical diagrams--Part 7:General arrangement diagram | QJ 1931.7A-2005 | 2005-7-1 |
Environmental testing for electric and electronic products - Part 2: Test methods - Test Xc: Fluid contamination | GB/T 2423.54-2005 | 2005-6-1 |
Environmental testing for electric and electronic products - Part 2: Test methods Test Xb: Abrasion of markings and letterings caused by rubbing of fingers and hands | GB/T 2423.53-2005 | 2005-6-1 |
Structuration of technical information and documentation | GB/T 19529-2004 | 2005-1-1 |
Electrotechnical terminology - Semiconductor devices and integrated circuits | GB/T 2900.66-2004 | 2004-12-1 |
Electrotechnical terminology - Power system protection | GB/T 2900.49-2004 | 2004-12-1 |
Electrotoechnical terminology - Power electronics | GB/T 2900.33-2004 | 2004-12-1 |
Environmental testing for electric and electrionic products - Part 2: Test methods - Test 77: Body strength and impact shock | GB/T 2423.52-2003 | 2004-8-1 |
Methods of measurement of touch current and protective conductor current | GB/T 12113-2003 | 2004-8-1 |
Power quality--Admissible deviation of supply voltage | GB/T 12325-2003 | 2004-3-1 |
STANDARD voltages | GB 156-2003 | 2004-3-1 |
Industrial systems, installations and equipment and industrial products - Structuring principles and reference designations - Part 2: classificatoin of objects and codes for classes | GB/T 5094.2-2003 | 2003-12-1 |
Preparation of parts lists | GB/T 19045-2003 | 2003-10-1 |
Industrial systemsinstallations and equipment and industrial products - Identification of terminals within a system | GB/T 18656-2002 | 2003-8-1 |
Electrotechnical terminology - Superconductivity | GB/T 13811-2003 | 2003-6-1 |
Electrotechnical terminology--Primary cells and batteries | GB/T 2900.62-2003 | 2003-6-1 |
Electrotechnical terminology - Elementary relays | GB/T 2900.63-2003 | 2003-6-1 |
Ratings of frequency, voltage and current of electric products for ships and offshore units | GB/T 4988-2002 | 2003-4-1 |
Electrotechnical terminology--Physics and chemistry | GB/T 2900.61-2002 | 2003-4-1 |
Fire hazard testing for electric and electronic products-Part 17: 500W flame test methods | GB/T 5169.17-2002 | 2003-4-1 |
Electrotechnical terminology - Electromagnetism | GB/T 2900.60-2002 | 2003-4-1 |
Industrial systems,installations and equipment and industrial products--Structuring principles and reference designations--Part 1:Basic rules | GB/T 5094.1-2002 | 2003-1-1 |
Fire hazard testing for electric and electronic products--Part 16:50 W horizontal and vertical flame test methods | GB/T 5169.16-2002 | 2003-1-1 |
Electrotechnical terminology--Generation,transmission and distribution of electricity--Power system planning and management | GB/T 2900.58-2002 | 2003-1-1 |
Electrotechnical terminology--Generation,transmission and distribution of electricity--Operation | GB/T 2900.57-2002 | 2003-1-1 |
Eletrotechnical terminology--Automatic control | GB/T 2900.56-2002 | 2003-1-1 |
Electrotechnical terminology--Generation,transmission and distribution of electricity--Substations | GB/T 2900.59-2002 | 2003-1-1 |
Standard current ratings | GB/T 762-2002 | 2002-12-1 |
Electrotechnical terminology - Magnetic materials and components | GB/T 9637-2001 | 2002-8-1 |
Preparation of documents used in electrotechnology--Part 4:Location and installation documents | GB/T 6988.4-2002 | 2002-8-1 |
Environmental testing for electric and electronic products--Part 2:Test methods--Tests B:Dry heat | GB/T 2423.2-2001 | 2002-6-1 |
Environmental testing for electric and electronic products--Part 2:Test methods--Test Cb:Damp heat,steady state,primarily for equipment | GB/T 2423.9-2001 | 2002-6-1 |
Tolerance and physical imperfections of permanent ferrite tegular magnets | SJ/T 11247-2001 | 2002-5-1 |
STANDARD data element types with associated classification scheme for electric components--Part 4:IEC reference collection of STANDARD data element types,component classes and terms | GB/T 17564.4-2001 | 2002-5-1 |
Environmental testing - Part 2: Test methods - Tests A: Cold | GB/T 2423.1-2008 | 2001-12-1 |
Classification of environmental parameters and their severities of electric and electronic products | GB/T 4796-2001 | 2001-12-1 |
Electrotechnical terminology--Generation,transmission and distribution of electricity--Generation | GB/T 2900.52-2000 | 2001-10-1 |
Graphical symbols for diagrams--Part 11:Architectural and topographical installation plans and diagrams | GB/T 4728.11-2000 | 2001-8-1 |
Graphical symbols for diagrams--Part 8:Measuring instruments,lamps and signalling devices | GB/T 4728.8-2000 | 2001-8-1 |
Environmental testing for electric and electronic products Part 3: Test guidance Seismic test methods | GB/T 2424.25-2000 | 2001-6-1 |
Fire hazardtesting for electric and electronic products--Test methods--500W nominal test flame and guidance | GB/Z 5169.15-2001 | 2001-1-2 |
Fire hazard testing for electric and electronic products--Test methods--1 kW nominal pre-mixed test flame and guidance | GB/T 5169.14-2001 | 2001-1-2 |
Environmental testing for electric and electronic products -Part 2: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution) | GB/T 2423.18-2000 | 2000-8-1 |
Graphical symbols for diagrams--Part 7:Switchgear,controlgear and protective devices | GB/T 4728.7-2000 | 2000-7-1 |
Environmental testing for electric and electronic products-- Part 2: Tests--Test J and guidance: Mould growth | GB/T 2423.16-1999 | 2000-6-1 |
Environmental testing for electric and electronic products--Part 1:General and guidance | GB/T 2421-1999 | 2000-5-1 |
Fire hazard testing for electric and electronic products-Test methods-Glow-wire ignitability test on materials | GB/T 5169.13-1999 | 2000-5-1 |
Fire hazard testing for electric and electronic products-Test methods-Glow -wire flammability test on materials | GB/T 5169.12-1999 | 2000-5-1 |
Graphical symbols for diagrams-Part 9:Telecommunications:Switching and peripheral equipment | GB/T 4728.9-1999 | 1999-10-1 |
Graphical symbols for diagrams. Part 4: Basic passive components | GB/T 4728.4-1999 | 1999-10-1 |
Standard data element types with associated classification scheme for electric components - Part 3: Maintenance and validation procedures | GB/T 17564.3-1999 | 1999-10-1 |
Graphical symbols for diagrams-Part 10:Telecommunications:Transmission | GB/T 4728.10-1999 | 1999-10-1 |
Electrotechnical terminologyGeneration , transmission and distribution of electricity--General | GB/T 2900.50-1998 | 1999-6-1 |
Standard data element types with associated classification scheme for electric components-Part 1: Detinitions-Principles and methods | GB/T 17564.1-1998 | 1999-6-1 |
Environmental testing for electric and electronic products. Part 2: Test methods. Test Ff: Vibration--Time-history method | GB/T 2423.48-1997 | 1998-10-1 |
Environmental testing for electric and electronic products. Part 2: Test methods. Test Fda: Random vibration wide band--Reproducibility high | GB/T 2423.12-1997 | 1998-10-1 |
Environmental testing for electric and electronic products. Part 2: Test methods. Test Fd: Random vibration wide band--General requirements | GB/T 2423.11-1997 | 1998-10-1 |
Environmental testing for electric and electronic products. Part 2: Test methods. Test Fdb: Random vibration wide band--Reproducibility medium | GB/T 2423.13-1997 | 1998-10-1 |
Environmental testing for electric and electronic products. Part 2: Test methods. Test Fdc: Random vibration wide band--Reproducibility low | GB/T 2423.14-1997 | 1998-10-1 |
Environmental testing for electric and electronic products Part 2: Test methods Test Fe: Vibration-sine-beat method | GB/T 2423.49-1997 | 1998-10-1 |
Environmental testing for electric and electronic products Part 2: Test methods Test Fg: Vibration, acoustically induced | GB/T 2423.47-1997 | 1998-10-1 |
Preparation of documents used in electrotechnology -Part 1: General requirements | GB/T 6988.1-1997 | 1998-8-1 |
Preparation of documents used in electrotechnology-Part 3: Connection diagrams, tables and lists | GB/T 6988.3-1997 | 1998-8-1 |
Preparation of documents used in electrotechnology-Part 2: Function-oriented diagrams | GB/T 6988.2-1997 | 1998-8-1 |
Fire hazard testing for electric and electronic products--Part 4: Terminology concerning fire tests | GB/T 5169.1-1997 | 1998-5-1 |
Insulation co-ordination for high voltage transmission and distribution equipment | GB 311.1-1997 | 1998-5-1 |
Fire hazard testing for electric and electronic products-Test methods-Glow-wire end-product test and guidance | GB/T 5169.11-1997 | 1998-1-2 |
Electrotechnical terminology Electrical apparatus for explosive atmospheres | GB/T 2900.35-1998 | 1998-1-2 |
Graphical symbols for diagrams. Part 2: Symbol elements, qualifying symbols and other symbols having general application | GB/T 4728.2-1998 | 1998-1-2 |
Graphical symbols for diagrams. Part 3 Conductors and connecting devices | GB/T 4728.3-1998 | 1998-1-2 |
Fire hazard testing for electric and electronic products-Test methods-Glow-wire test methods-General | GB/T 5169.10-1997 | 1998-1-2 |
Standard frequencies for centralized network control installations | GB/T 16700-1996 | 1997-12-1 |
Inspection methods for basic parameters of environmental testing equipments for electric and electronic products-Corrosive gas testing equipments | GB/T 5170.11-1996 | 1997-11-1 |
Inspection methods for basic parameters of environmental testing equipments for electric and electronic products-Damp heat testing equipments | GB/T 5170.5-1996 | 1997-11-1 |
Inspection methods for basic parameters of environmental testing equipments for electric and electronic products-Salt mist testing equipments | GB/T 5170.8-1996 | 1997-11-1 |
Graphical symbols for electrical diagrams-Part 13: Analogue elements | GB/T 4728.13-1996 | 1997-7-1 |
Inspection methods for basic parameters of environmental testing equipments for electric and electronic products -Solar radiation testing equipments | GB/T 5170.9-1996 | 1997-7-1 |
Environmental conditions existing in the application of electric and electronic products-Transportation | GB/T 4798.2-1996 | 1997-7-1 |
Inspection methods for basic parameters of environmental testing equipments for electric and electronic products -Combined high and low temperature/low air pressure testing�equipments | GB/T 5170.10-1996 | 1997-7-1 |
Graphical symbols for electrical diagrams--Part 12:Binary logic elements | GB/T 4728.12-1996 | 1997-7-1 |
Electrotechnical terminology Electrical carbon | GB/T 2900.7-1996 | 1997-7-1 |
Inspection methods for basic parameters of environmental testing equipments for electric and electronic products -Temperature testing equipments | GB/T 5170.2-1996 | 1997-7-1 |
General principles for the creation of graphical symbols for use on electrical equipment | GB/T 5465.1-1996 | 1997-5-1 |
Graphical symbols for use on electrical equipment | GB/T 5465.2-1996 | 1997-5-1 |
Standard frequencies | GB/T 1980-1996 | 1997-1-2 |
Standard current | GB/T 762-1996 | 1996-10-1 |
Environmental testing for electric and electronic products - Part 2: Test methods Test Ec and guidance: Drop and topple Primarily for equipment-type specimens | GB/T 2423.7-1995 | 1996-8-1 |
Environmental testing for electric and electronic products Part 2:Test methods Test Ea and guidance:Shock | GB/T 2423.5-1995 | 1996-8-1 |
Environmental testing for electric and electronic products-Part 2: Test methods-Test Eb and guidance: Bump | GB/T 2423.6-1995 | 1996-8-1 |
Environmental testing for electric and electronic productsPart 2: test methodsMounting of components, equipment and other articles for dynamic tests including shock(Ea), bump(Eb), vibration(Fc and Fd) and steady-state acceleration(Ga) and guidanc | GB/T2423.43-1995 | 1996-8-1 |
Environmental testing for electric and electronic products Part 2:Test methods Test Ed:Free fall | GB/T 2423.8-1995 | 1996-8-1 |
Environmental testing for electric and electronic products-Part 2: Test methods Test Fc and guidance: Vibration (Sinusoidal) | GB/T 2423.10-1995 | 1996-8-1 |
Technical Guide of Supervision for Manufacturing Equipment of Electric Power by User | DL/T 586-1995 | 1996-5-1 |
Inspection methods for basic parameters of environmental testing equipments for electric and electronic products-General | GB/T 5170.1-1995 | 1996-1-1 |
Electrotechnical terminology Industrial electro-heat installation | GB/T 2900.23-1995 | 1996-1-1 |
Electrotechnical terminology Insulator | GB/T 2900.8-1995 | 1996-1-1 |
Electrotechnical terminology Small-power motor | GB/T 2900.27-1995 | 1996-1-1 |
Basic environmental testing procedures for electric and electronic products Guidance for combined temperature(cold and heat)/low air pressure/vibration (sinusoidal)test | GB/T 2424.24-1995 | 1995-12-1 |
Environmental testing for electric and electronic products Guidance on soldering test | GB/T 2424.17-1995 | 1995-8-1 |
Electrotechnical terminology Special alloys for electrical equipment | GB/T 2900.4-1994 | 1995-5-1 |
Environmental testing for electric and electronic products Combined low temperature/low air pressure/vibration(sinusoidal)test | GB/T 2423.42-1995 | 1995-1-2 |
Electrotechnical terminology - Power semiconductor device | GB/T 2900.32-1994 | 1995-1-1 |
Electrotechnical terminology Electric tool | GB/T 2900.28-1994 | 1995-1-1 |
Electrotechnical terminology - Spark plug | GB/T 2900.9-1994 | 1995-1-1 |
Electrotechnical terminologies--Power system protection | GB/T 2900.49-1994 | 1995-1-1 |
Electrotechnical terminologies Electrical relays | GB/T 2900.17-1994 | 1995-1-1 |
Electrotechnical terminology - High- voltage test technique and insulation co-ordination | GB/T 2900.19-1994 | 1995-1-1 |
Electrotechnical terminology-Control motors and feedback components | GB/T 2900.26-1994 | 1994-12-1 |
Electrotechnical terminology High-voltage switchgear | GB/T 2900.20-1994 | 1994-12-1 |
Electrotechnical terminology Special equipment for electrical machine and transformer | GB/T 2900.39-1994 | 1994-12-1 |
Electrotechnical terminology--Rotating electrical machines | GB/T 2900.25-1994 | 1994-12-1 |
Electrotechnical terminology--Power electronics | GB/T 2900.33-1993 | 1994-9-1 |
Basic environmental testing procedures for electric and electronic products Guidance for damp heat tests | GB/T 2424.2-1993 | 1994-7-1 |
Basic environmental testing procedures for electric and electronic products-Test Ca: Damp heat, steady state | GB/T 2423.3-1993 | 1994-7-1 |
Basic environmental testing procedures for electric and electronic products-Test Db: Damp heat, cyclic | GB/T 2423.4-1993 | 1994-7-1 |
Preparation of function charts for control systems | GB/T 6988.6-1993 | 1994-3-1 |
Voltage Range of Electrical Installations | JB/T 5980-1992 | 1993-7-1 |
Environmental conditions appearing in nature of electric and electronic products-Precipitation and wind | GB/T 4797.5-1992 | 1993-4-1 |
Electrotechnical terminology Fundamental terms | GB/T 2900.1-1992 | 1993-3-1 |