| Title |
Standard No. |
Implemented On |
| Cable used in photovoltaic system Part4:Computer and instrumentaion cable | T/CEEIA 218.4-2012 | |
| Mineral insulated cables with a rated voltage not exceeding 750V | T/ZZB 0107-2016 | |
| Electrical apparatus for explosive atmosphere--Flameproof electrical apparatus d | GB 3836.2-1983 | |
| Polyvinyl chloride insulated cables and wires and cords of rated voltages up to and including 450/750V Part 2:Insulated cables and wires for fixed wiring | JB 8734.2-1998 | |
| Cable used in photovoltaic system Part1:General requirements | T/CEEIA 218.1-2012 | |
| Polyvinyl chloride insulated cables and wires and cords of rated voltages up to and including 450/750V Part 4:Insulated wires for internal wiring of equipment | JB 8734.4-1998 | |
| Halogen free low smoke flame-retardant and low toxicity polyolefin materials for wires and cables | T/SHPTA 008-2021 | |
| Methods of test for enameled wires--General | GB/T 4074.1-1983 | |
| Methods of test for enameled wires--Heat bonding test | GB 4074.27-1983 | |
| Round aluminum rod for electrical purposes | GB/T 3954-1983 | |
| Methods of test for enameled wires--Test for resistance to refrigerants--Extraction with trichloroethylene and methanol | GB/T 4074.28-1983 | |
| Test on gases evolved during combustion of materials from cables or optical fiber cables - Part 2: Determination of acidity (by pH measurement) and conductivity | GB/T 17650.2-2021 | |
| Methods of test for enameled wires--Unidirectional scrape resistance test | GB 4074.14-1983 | |
| Test methods for enamelled wires--Test for continuityof covering | GB/T 4074.20-1991 | |
| Methods of test for enameled wires--Solder test | GB/T 4074.26-1983 | |
| Cable used in photovoltaic system Part2:AC/DC transmission power cable | T/CEEIA 218.2-2012 | |
| Technical specification of high voltage bushings | GB/T 4109-1988 | |
| Implementation Rules for compulsory certification of electric and electronic products - electric wires and cables products- electric wires and cables | CNCA 01C-002-2007 | |
| Tests on electric and optical fibre cables under fire conditions—Part 36：Test for vertical flame spread of vertically-mounted bunched wires or cables—Category D | GB/T 18380.36-2022 | 2022-10-1 |
| Tests on electric and optical fibre cables under fire conditions—Part 11:Test for vertical flame propagation for a single insulated wire or cable—Apparatus | GB/T 18380.11-2022 | 2022-10-1 |
| Circuit integrity test for electric cables or optical fiber cables under fire conditions - Part 2: Test method for fire with shock at a temperature of at least 830 ℃ for cables of rated voltage up to and including 0.6/1 kV and with an overall diameter not | GB/T 19216.2-2021 | 2021-12-1 |
| Circuit integrity test for electric cables or optical fiber cables under fire conditions—Part 3:Test method for fire with shock at a temperature of at least 830℃ for cables of rated voltage up to and including 0.6/1 kV tested in a metal enclosure | GB/T 19216.3-2021 | 2021-12-1 |
| Circuit integrity test for electric cables or optical fiber cables under fire conditions-Part 1:Test method for fire with shock at atemperature of at least 830 ℃ for cables of rated voltage up to and including 0.6/ 1 kV and with an overall diameter exceeding 20 mm | GB/T 19216.1-2021 | 2021-12-1 |
| Measurement of smoke density of cables or optical fiber cables burning under defined conditions - Part 2: Test procedure and requirements | GB/T 17651.2-2021 | 2021-11-1 |
| Measurement of smoke density of cables or optical fiber cables burning under defined conditions-Part 1:Test apparatus | GB/T 17651.1-2021 | 2021-11-1 |
| Test on gases evolved during combustion of materials from cables or optical fiber cables-Part 1:Determination of the halogen acid gas content | GB/T 17650.1-2021 | 2021-11-1 |
| D.C. extruded cables systems for power transmission at a rated voltage up to and including 500 kV—Part 4:Accessories for D.C. cables | GB/T 31489.4-2020 | 2021-7-1 |
| D.C. extruded cable systems for power transmission at a rated voltage up to and including 500 kV—Part 2:D.C. land cables | GB/T 31489.2-2020 | 2021-7-1 |
| D.C. extruded cable systems for power transmission at a rated voltage up to and including 500 kV—Part 3:D.C. submarine cables | GB/T 31489.3-2020 | 2021-7-1 |
| Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um=1.2 kV) up to 35 kV (Um=40.5 kV)—Part 1: Cables for rated voltage of 1 kV(Um=1.2 kV)and 3 kV(Um=3.6 kV) | GB/T 12706.1-2020 | 2020-10-1 |
| Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um=1.2 kV) up to 35 kV (Um=40.5 kV)—Part 2: Cables for rated voltages from 6 kV(Um=7.2 kV) up to 30 kV(Um=36 kV) | GB/T 12706.2-2020 | 2020-10-1 |
| Plastic insulated control cables | GB/T 9330-2020 | 2020-10-1 |
| Power cables with extruded insulation and their accessories for rated voltages from l kV (Um=1.2 kV) up to 35 kV(Um=40.5 kV)—Part 4:Test requirements on accessories for cables with rated voltages from 6 kV(Um=7.2 kV) up to 35 kV(Um=40.5 kV) | GB/T 12706.4-2020 | 2020-10-1 |
| Power cables with extruded insulation and their accessories for rated voltages from 1kV (Um=1.2kV) up to 35kV (Um=40.5kV)—Part 3: Cables for rated voltages of 35kV(Um=40.5kV) | GB/T 12706.3-2020 | 2020-10-1 |
| General rules for flame retardant and fire resistant electric wires and cables or optical fiber cables | GB/T 19666-2019 | 2020-7-1 |
| Internal connecting wires and cables of electrical equipment | GB/T 38296-2019 | 2020-7-1 |
| Carbon-fiber heating cables in building | JG/T 538-2018 | 2018-12-1 |
| Multicore and symmetrical pair/quad cables for digital communications―Part 8:Symmetrical pair/quad cables with transmission characteristics up to 1 200 MHz―Work area wiring sectional specification | GB/T 18015.8-2017 | 2018-7-1 |
| Multicore and symmetrical pair/quad cables for digital communications―Part 1:Generic specification | GB/T 18015.1-2017 | 2018-7-1 |
| Multicore and symmetrical pair/quad cables for digital communications―Part 7:Symmetrical pair/quad cables with transmission characteristics up to 1 200 MHz―Sectional specification for digital and analog communication cables | GB/T 18015.7-2017 | 2018-7-1 |
| Generality of rat and termite proof wires and cables | GB/T 34016-2017 | 2018-2-1 |
| Charging cables for electric vehicles | GB/T 33594-2017 | 2017-12-1 |
| Electrical installations in ships -- Insulating and sheathing materials for shipboard and offshore units, power, control, instrumentation and telecommunication cables | GB/T 33596-2017 | 2017-12-1 |
| Flexible and torsion resistant cables of rated voltages from 6 kV(Um=7.2 kV)up to 35 kV(Um=40.5 kV)for wind power generation | GB/T 33606-2017 | 2017-12-1 |
| Test methods of insulated electric wires for aerospace | GB/T 33343-2016 | 2017-7-1 |
| Power cables with cross-linked polyethylene insulation for rated voltage of 220kV(Um=252kV)— Part 2: Technical requirements | T/ZZB 0154.2-2016 | 2016-12-31 |
| Power cables with cross-linked polyethylene insulation for rated voltage of 220kV(Um=252kV)—Part 1: Test methods and requirements | T/ZZB 0154.1-2016 | 2016-12-31 |
| D.C. extruded cable for power transmission at a rated voltage up to and including 320kV—Part 3: D.C. submarine cables technical requirements | T/ZZB 0165.3-2016 | 2016-12-31 |
| Test methods for communication cable | GB/T 5441-2016 | 2016-11-1 |
| Rubber insulated cords and flexible cables of rated voltages up to and including 450/750 V -Part 2:Tough rubber sheathed flexible cables for general purposes | JB/T 8735.2-2016 | 2016-9-1 |
| Long AC submarine cables with cross-linked polyethylene insulation and their accessories for rated voltage of 220 kV(Um=252 kV)―Part 1:Test methods and requirements | GB/T 32346.1-2015 | 2016-7-1 |
| Long AC submarine cables with cross-linked polyethylene insulation and their accessories for rated voltage of 220 kV(Um=252 kV) - Part 3: Accessories for submarine cables | GB/T 32346.3-2015 | 2016-7-1 |
| Long AC submarine cables with cross-linked polyethylene insulation and their accessoried for rated voltage of 220 kV(Um=252 kV) - Part 2: Long AC submarine cables | GB/T 32346.2-2015 | 2016-7-1 |
| Power cable with silicone rubber insulation silicone rubber sheathed | T/CEEIA 233-2016 | 2016-5-20 |
| Electric cable for computer and instrumentation | T/CEEIA 234-2016 | 2016-5-20 |
| Power cables with cross-linked polyethylene insulation and their accessories for rated voltage of 220 kV(Um=252 kV)―Part 2:Power cables | GB/T 18890.2-2015 | 2016-5-1 |
| Power cables with cross-linked polyethylene insulation and their accessories for rated voltage of 220 kV(Um=252 kV)―Part 3:Accessories | GB/T 18890.3-2015 | 2016-5-1 |
| Power cables with cross-linked polyethylene insulation and their accessories for rated voltage of 220 kV(Um=252 kV)―Part 1:Test methods and requirements | GB/T 18890.1-2015 | 2016-5-1 |
| Halogen free low smoke and flame-retardant compounds for wires and cables | GB/T 32129-2015 | 2016-5-1 |
| Aluminum alloys power cables with extruded insulation for rated voltages from 1 kV(Um=1.2 kV) up to 35 kV(Um=40.5 kV)―Part 3:Cables for rated voltage of 35 kV(Um=40.5 kV) | GB/T 31840.3-2015 | 2016-2-1 |
| Aluminum alloys power cables with extruded insulation for rated voltages from 1 kV(Um=1.2 kV)up to 35 kV(Um=40.5 kV)―Part 1:Cables for rated voltages of 1 kV(Um=1.2 kV)and 3 kV(Um=3.6 kV) | GB/T 31840.1-2015 | 2016-2-1 |
| Twinax cable for digital communications of 20 GHz and lower | GB/T 31834-2015 | 2016-2-1 |
| Aluminum alloys power cables with extruded insulation for rated voltages from 1 kV(Um=1.2 kV)up to 35 kV(Um=40.5 kV)―Part 2:Cables for rated voltages from 6 kV(Um=7.2 kV) up to 30 kV(Um=36 kV) | GB/T 31840.2-2015 | 2016-2-1 |
| D.C. extruded cable systems for power transmission at a rated voltage up to and including 500 kV―Part 1:Test methods and requirements | GB/T 31489.1-2015 | 2015-12-1 |
| Double-layer Co-extrusion Insulated Irradiation Crosslinked LSZH Flame-retardant Power Cable with Rated Voltage of 0.6/1KV | JG/T 442-2014 | 2015-2-1 |
| Double-layer Co-extrusion Insulated Irradiation Crosslinked LSZH Flame-retardant Wire with Rated Voltage of 450/750v or Below | JG/T 441-2014 | 2015-2-1 |
| Power cables with cross-linked polyethylene insulation and their accessories for rated voltage of 110 kV(Um=126 kV)―Part 1:Test methods and requirements | GB/T 11017.1-2014 | 2015-1-22 |
| Power cables with cross-linked polyethylene insulation and their accessories for rated voltage of 110 kV (Um=126 kV)―Part 2:Power cables | GB/T 11017.2-2014 | 2015-1-22 |
| Power cables with cross-linked polyethylene insulation and their accessories for rated voltage of 110 kV(Um=126 kV)―Part 3:Accessories | GB/T 11017.3-2014 | 2015-1-22 |
| Delivery drums for wires and cables - Part 2: Wood delivery drums | JB/T 8137.2-2013 | 2014-7-1 |
| Delivery drums for wires and cables - Part 3: Steel delivery drums with corrugated plate | JB/T 8137.3-2013 | 2014-7-1 |
| Delivery drums for wires and cables—Part 1:General specifies | JB/T 8137.1-2013 | 2014-7-1 |
| Delivery drums for electric wires and cables. Part 4:Steel shapes composite delivery drums | JB/T 8137.4-2013 | 2014-7-1 |
| MFPT plastics-steel complex cable duct | T/CEEIA 227-2014 | 2014-4-11 |
| Industrial Systems, Installations and Equipment and Industrial Products - Labelling of Cables and Cores | GB/T 30085-2013 | 2014-4-9 |
| Optical fiber composite low-voltage cable for rated voltages up to and including 1 kV(Um=1.2 kV) | GB/T 29839-2013 | 2014-3-7 |
| Flexible and torsion resistant cables of rated voltages up to and including 1.8/3 kV for wind turbine | GB/T 29631-2013 | 2013-12-2 |
| Rubber insulated cables—Rated voltages up to and including 450/750 V—Part 8:Cords for applications requiring high flexibility | GB/T 5013.8-2013 | 2013-12-2 |
| Local telecommunication cables with polyolefin insulation and polyolefin sheath—Part 1:General | GB/T 13849.1-2013 | 2013-12-2 |
| 2.6/9.5 mm composite coaxial cable for telecommunication use | GB/T 4012-2013 | 2013-12-2 |
| 1.2/4.4 mm composite coaxial cable for telecommunication use | GB/T 4011-2013 | 2013-12-2 |
| Polyvinyl chloride insulated cables and wires and cords of rated voltages up to and including 450/750V — Part 5: Screened wires | JB/T 8734.5-2012 | 2012-11-1 |
| Polyvinyl chloride insulated cables and wires and cords of rated voltages up to and including 450/750V — Part 2：Insulated cables and wires for fixed wiring | JB/T 8734.2-2012 | 2012-11-1 |
| Polyvinyl chloride insulated cables and wires and cords of rated voltages up to and including 450/750V — Part 3 : Cords and cables for connecting | JB/T 8734.3-2012 | 2012-11-1 |
| Polyvinyl chloride insulated cables and wires and cords of rated voltages up to and including 450/750V —Part 4 : Insulated wires for internal wiring of equipment | JB/T 8734.4-2012 | 2012-11-1 |
| Polyvinyl chloride insulated cables and wires and cords of rated voltages up to and including 450/750V — Part 1：General requirements | JB/T 8734.1-2012 | 2012-11-1 |
| Polyvinyl chloride insulated cables and wires and cords of rated voltages up to and including 450/750V — Part 6: Lift cables | JB/T 8734.6-2012 | 2012-11-1 |
| Verification procedure for test equipment of rubber plastic wire and cable-Part 11:Low temperature bendingt test device | JB/T 4278.11-2011 | 2011-8-1 |
| Verification procedure for test equipment of rubber plastic wire and cable-Part 6:Natural ventilation thermal aging test oven | JB/T 4278.6-2011 | 2011-8-1 |
| Verification procedure for test equipment of rubber plastic wire and cable-Part 13:Forced air heat aging test oven | JB/T 4278.13-2011 | 2011-8-1 |
| Verification procedure for test equipment of rubber plastic wire and cable-Part 19:Insulation scrape abrasion test device | JB/T 4278.19-2011 | 2011-8-1 |
| Electric submersible pump cables of rating voltages up to and including 3.6/6kV-Part 4:Round power cable | JB/T 5332.4-2011 | 2011-8-1 |
| Test methods for determing mechanical physical and chemical properties of electric cables and wires - Part 10:Rat gnawing test | JB/T 10696.10-2011 | 2011-8-1 |
| Verification procedure for test equipment of rubber plastic wire and cable-Part 2:Low temperature impact test device | JB/T 4278.2-2011 | 2011-8-1 |
| Verification procedure for test equipment of rubber plastic wire and cable-Part 12:High temperature pressure test device | JB/T 4278.12-2011 | 2011-8-1 |
| Verification procedure for test equipment of rubber plastic wire and cable-Part 5:Single insulated wire and cable vertical burning test device | JB/T 4278.5-2011 | 2011-8-1 |
| Metal sheaths for cables -Part 2:Lead sheaths | JB/T 5268.2-2011 | 2011-8-1 |
| Electric submersible pump cables of rating voltages up to and including 3.6/6kV-Part 1:General requirements | JB/T 5332.1-2011 | 2011-8-1 |
| Verification procedure for test equipment of rubber plastic wire and cable-Part 14:Fire-resisting test device | JB/T 4278.14-2011 | 2011-8-1 |
| Verification procedure for test equipment of rubber plastic wire and cable-Part 10:Spark tester | JB/T 4278.10-2011 | 2011-8-1 |
| Type pedigree on accessories for power cables with rated voltages up to 26/35kV | JB/T 6467-2011 | 2011-8-1 |
| Electric submersible pump cables of rating voltages up to and including 3.6/6kV-Part 2:Motor lead | JB/T 5332.2-2011 | 2011-8-1 |
| Verification procedure for test equipment of rubber plastic wire and cable-Part 18:Copper single insulated wire and cable vertical burning test device | JB/T 4278.18-2011 | 2011-8-1 |
| Metal sheaths for cables -Part 1:General requirement | JB/T 5268.1-2011 | 2011-8-1 |
| Verification procedure for test equipment of rubber plastic wire and cable-Part 4:Abrasion test device | JB/T 4278.4-2011 | 2011-8-1 |
| Verification procedure for test equipment of rubber plastic wire and cable-Part 17:Carbon black content test device | JB/T 4278.17-2011 | 2011-8-1 |
| Verification procedure for test equipment of rubber plastic wire and cable-Part 9:Oxygen bomb、air bomb aging test oven | JB/T 4278.9-2011 | 2011-8-1 |
| Test methods for determing mechanical physical and chemical properties of electric cables and wires - Part 9:Termite test | JB/T 10696.9-2011 | 2011-8-1 |
| Verification procedure for test equipment of rubber plastic wire and cable-Part 16:Smoke density test device | JB/T 4278.16-2011 | 2011-8-1 |
| Verification procedure for test equipment of rubber plastic wire and cable-Part 15:Bundle burning test device | JB/T 4278.15-2011 | 2011-8-1 |
| Long AC submarine cables with cross-linked polyethylene insulation and their accessories for rated voltage from 10kV up to 110kV Part2:Long AC submarine cables with cross-linked polyethylene insulation for rated voltages from 10kV up to 100kV | JB/T 11167.2-2011 | 2011-8-1 |
| Rubber insulated cords and flexible cables of rated voltages up to and including 450/750 V Part 3: Rubber insulated braided cords | JB/T 8735.3-2011 | 2011-8-1 |
| Long AC submarine cables with cross-linked polyethylene insulation and their accessories for rated voltage from 10kV (Um=12kV) up to 110kV(Um=126kV) Part 1:Test methods and requirements | JB/T 11167.1-2011 | 2011-8-1 |
| Rubber insulated cords and flexible cables of rated voltages up to and including 450/750 V -Part 2:Tough rubber sheathed flexible cables for general purposes | JB/T 8735.2-2011 | 2011-8-1 |
| Rubber insulated cords and flexible cables of rated voltages up to and including 450/750 V Part 1: General requirements | JB/T 8735.1-2011 | 2011-8-1 |
| Verification procedure for test equipment of rubber plastic wire and cable-Part 3:Flexing test device | JB/T 4278.3-2011 | 2011-8-1 |
| Verification procedure for test equipment of rubber plastic wire and cable-Part 8:Low temperature test oven | JB/T 4278.8-2011 | 2011-8-1 |
| Braided copper wires for electrical purposes- Part 1:General | JB/T 6313.1-2011 | 2011-8-1 |
| Verification procedure for test equipment of rubber plastic wire and cable-Part 1:General | JB/T 4278.1-2011 | 2011-8-1 |
| Verification procedure for test equipment of rubber plastic wire and cable-Part 7:Thermostat water bath | JB/T 4278.7-2011 | 2011-8-1 |
| Cables for coal mine - Part 4: Flexible cables with metallic screen for use with coal cutters of ratedvoltages up to and including 1.9/3.3 kV | MT 818.4-2009 | 2010-7-1 |
| Cables for coal mine - Part 6: Movable flexible cables with metallic screen and monitoring cores of ratedvoltages up to and including 8.7/10 kV. | MT 818.6-2009 | 2010-7-1 |
| Cables for coal mine-Part 12: PVC insulation power cables for coal mine rated voltages up to andincluding 1.8/3kV | MT 818.12-2009 | 2010-7-1 |
| Cables for coal mine - Part 10: Cap lamp flexible cord for coal mine | MT 818.10-2009 | 2010-7-1 |
| Cables for coal mine - Part 8: Drill cable for coal mine of rated voltage 0.3/0.5 kV | MT 818.8-2009 | 2010-7-1 |
| Cables for coal mine - Part 5: Movable flexible cables of rated voltages up to and including 0.66/1.14 kV | MT 818.5-2009 | 2010-7-1 |
| Cables for coal mine-Part 7: Movable flexible cables with screen of rated voltages up to and including 6/10 kV | MT 818.7-2009 | 2010-7-1 |
| Cables for coal mine - Part 11: General rules for fixed formation power cables of rated voltages up to andincluding 10kV | MT 818.11-2009 | 2010-7-1 |
| Cables for coal mine-Part 9: Light movale flexible cables for coal mine of rated voltage 0.3/0.5 kV | MT 818.9-2009 | 2010-7-1 |
| Cables for coal mine - Part 1: General rules for movable flexible cables | MT 818.1-2009 | 2010-7-1 |
| Cables for coal mine - Part 2: Flexible cables for use with coal cutters of rated voltages up to andincluding 1.9/3.3kV | MT 818.2-2009 | 2010-7-1 |
| Cables for coal mine - Part 3: Reinforced flexible cables with screen and monitoring cores for use withcoal cutters of rated voltages up to and including 1.9/3.3kV. | MT 818.3-2009 | 2010-7-1 |
| Cables for coal mine - Part 13: Cross -linked polyethylene insulation power cables for coal mine of ratedvoltages up to and including 8.7/10kV | MT 818.13-2009 | 2010-7-1 |
| Plastic or rubber insulated telephone cords - Part 2: Polyvinyl chloride insulated telephone cords | GB/T 11016.2-2009 | 2009-12-1 |
| Plastic or rubber insulated telephone cords - Part 3: Polypropylene insulated telephone cords | GB/T 11016.3-2009 | 2009-12-1 |
| High-voltage ignition wires for road vehicles | GB/T 14820-2009 | 2009-12-1 |
| Plastic or rubber insulated telephone cords - Part 4: Rubber insulated telephone cords | GB/T 11016.4-2009 | 2009-12-1 |
| Plastic or rubber insulated telephone cords - Part 1: General | GB/T 11016.1-2009 | 2009-12-1 |
| Electrical installation in ships - Shipboard telecommunication cables and radio-frequency cables - General instrumentation control and communication cables | GB/T 9333-2009 | 2009-12-1 |
| Electrical installation in ships - Shipboard telecommunication cables and radio-frequency cables - Shipboard flexible coaxial cables | GB/T 9334-2009 | 2009-12-1 |
| Tests for electric or optical fibre cables under fire conditions - Circuit integrity - Part 12: Apparatus - Fire with shock at a temperature of at least 830℃ | GB/T 19216.12-2008 | 2009-11-1 |
| Protective coverings for electric cables - Part 3: General protective coverings for cables with non-metallic sheath | GB/T 2952.3-2008 | 2009-11-1 |
| Power cables with extruded insulation and their accessories for rated voltages from 1kV (Um=1.2kV) up to 35kV (Um=40.5kV) - Part 2: Cables for rated voltages from 6kV (Um=7.2kV) up t | GB/T 12706.2-2008 | 2009-11-1 |
| Tests for electric or optical fibre cables under fire conditions - Circuit integrity - Part 31: Procedures and requirements for fire with shock - Cables of rated voltage up to and i | GB/T 19216.31-2008 | 2009-11-1 |
| Power cables with extruded insulation and their accessories for rated voltages from 1kV (Um=1.2kV) up to 35kV (Um=40.5kV) - Part 3: Cables for rated voltage of 35kV(Um=40.5kV) | GB/T 12706.3-2008 | 2009-11-1 |
| Protective coverings for electric cables - Part 1: General | GB/T 2952.1-2008 | 2009-11-1 |
| Protective coverings for electric cables - Part 2: Protective coverings for cables with metallic sheath | GB/T 2952.2-2008 | 2009-11-1 |
| Power cables with extruded insulation and their accessories for rated voltages from lkV (Um=1.2kV) up to 35kV (Um=40.5kV) - Part 4: Test requirements on accessories for cables with r | GB/T 12706.4-2008 | 2009-11-1 |
| Power cables with extruded insulation and their accessories for rated voltages from 1kV (Um=1.2kV) up to 35kV (Um=40.5kV) - Part 1: Cables for rated voltage of 1kV (Um=1.2kV) and 3kV (Um=3.6kV) | GB/T 12706.1-2008 | 2009-11-1 |
| Electrical installations in ships - Cables for control and instrumentation circuits 150/250V (300V) | GB/T 9332-2008 | 2009-11-1 |
| Compression and mechanical connectors for power cables for rated voltages up to 35kV (Um=40.5kV) - Test methods and requirements | GB/T 9327-2008 | 2009-11-1 |
| Compression type terminal lugs and ferrules with copper or aluminum for power cables conductors | GB/T 14315-2008 | 2009-10-1 |
| Conductors of insulated cables | GB/T 3956-2008 | 2009-10-1 |
| Plastic insulated control cables - Part 3: Cross-linked polyethylene insulated control cables | GB/T 9330.3-2008 | 2009-10-1 |
| Class 1E cables for nuclear power generating stations - General requirements | GB/T 22577-2008 | 2009-10-1 |
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V - Part 3: Non-sheathed cables for fixed wiring | GB/T 5023.3-2008 | 2009-5-1 |
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V - Part 4: Sheathed cables for fixed wiring | GB/T 5023.4-2008 | 2009-5-1 |
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V - Part 5: Flexible cables (cords) | GB/T 5023.5-2008 | 2009-5-1 |
| Oil-filled paper or polypropylene paper laminate insulated metal-sheathed cables and accessories for alternating voltages up to and including 500kV - Part 1: Test | GB/T 9326.1-2008 | 2009-5-1 |
| Oil-filled paper or polypropylene paper laminate insulated metal-sheathed cables and accessories for alternating voltages up to and including 500kV - Part 4: Joint | GB/T 9326.4-2008 | 2009-5-1 |
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V - Part 7: Flexible cables screened and unscreened with two or more conductors | GB/T 5023.7-2008 | 2009-5-1 |
| Oil-filled paper or polypropylene paper laminate insulated metal-sheathed cables and accessories for alternating voltages up to and including 500kV - Part 2: Oil-filled paper insulate | GB/T 9326.2-2008 | 2009-5-1 |
| Oil-filled paper or polypropylene paper laminate insulated metal-sheathed cables and accessories for alternating voltages up to and including 500kV - Part 5: Pressure tanks | GB/T 9326.5-2008 | 2009-5-1 |
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V - Part 2: Test methods | GB/T 5023.2-2008 | 2009-5-1 |
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V - Part 1: General requirements | GB/T 5023.1-2008 | 2009-5-1 |
| Oil-filled paper or polypropylene paper laminate insulated metal-sheathed cables and accessories for alternating voltages up to and including 500kV - Part 3: Sealing end | GB/T 9326.3-2008 | 2009-5-1 |
| Tests on electric and optical fibre cables under fire conditions - Part 21: Test for vertical flame propagation for a single small insulated wire or cable - Apparatus | GB/T 18380.21-2008 | 2009-4-1 |
| Test on electric and optical fibre cables under fire conditions - Part 31: Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus | GB/T 18380.31-2008 | 2009-4-1 |
| Common test methods for insulating and sheathing materials of electric and optical cables - Part 12: Methods for general application - Thermal ageing methods | GB/T 2951.12-2008 | 2009-4-1 |
| Common test methods for insulating and sheathing materials of electric and optical cables - Part 13: Methods for general application - Measurement for determining the density - Water | GB/T 2951.13-2008 | 2009-4-1 |
| Flexible rubber-sheathed cables for mining purposes - Part 8：Flexible drill cables for rated voltage of 0.3/0.5kV | GB/T 12972.8-2008 | 2009-4-1 |
| Flexible rubber-sheathed cables for mining purposes - Part 2：Flexible coalcutter cables for rated voltages up to 1.9/3.3kV | GB/T 12972.2-2008 | 2009-4-1 |
| Paper-insulated power cables and their accessories with rated voltages up to and including 35kV - Part 2: General and construction requirements for power cables with rated voltages 35kV | GB/T 12976.2-2008 | 2009-4-1 |
| Common test methods for insulating and sheathing materials of electric and optical cables - Part 21: Methods specific to elastomeric compounds - Ozone resistance, hot set and mineral | GB/T 2951.21-2008 | 2009-4-1 |
| Power cables with cross-linked polyethylene insulation and theiraccessories for rated voltage of 500kV(Um=550kV) - Part 3: Accessories for power cables with cross-linked polyethylene | GB/T 22078.3-2008 | 2009-4-1 |
| Common test methods for insulating and sheathing materials of electric and optical cables - Part 14: Methods for general application - Test at low temperature | GB/T 2951.14-2008 | 2009-4-1 |
| Test on electric and optical fibre cables under fire conditions - Part 12: Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1kW pre-mixed fla | GB/T 18380.12-2008 | 2009-4-1 |
| Common test methods for insulating and sheathing materials of electric and optical cables - Part 11：Methods for general application - Measurement of thickness and overall dimensions | GB/T 2951.11-2008 | 2009-4-1 |
| Flexible rubber-sheathed cables for mining purposes - Part 6：Flexible cables with monitoring core and metallic screens for rated voltages up to 6/10kV | GB/T 12972.6-2008 | 2009-4-1 |
| Tests on electric and optical fibre cables under fire conditions - Part 35: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category C | GB/T 18380.35-2008 | 2009-4-1 |
| Paper-insulated power cables and their accessories with rated voltages up to and including 35kV - Part 3: Test on cables and their accessories | GB/T 12976.3-2008 | 2009-4-1 |
| Plastic Insulated Control Cables - Part 2: Polyvinyl Chloride Insulated and Sheathed Control Cables | GB/T 9330.2-2008 | 2009-4-1 |
| Power cables with cross-linked polyethylene insulation and their accessories for rated voltage of 500 kV (Um=550 kV) - Part1: Power cable systems-cables with cross-linked polyethylen | GB/T 22078.1-2008 | 2009-4-1 |
| Tests on electric and optical fibre cables under fire conditions - Part 33: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A | GB/T 18380.33-2008 | 2009-4-1 |
| Flexible rubber-sheathed cables for mining purposes - Part 10：Miners cap lamp cords | GB/T 12972.10-2008 | 2009-4-1 |
| Test method on a single wire or cable under fire conditions - Part 1: Vertical specimen flame test | GB/T 12666.1-2008 | 2009-4-1 |
| Single and multicore non-radial field power cables with extruded solid insulation for rated voltages 1kV and 3 kV | GB/T 9331-2008 | 2009-4-1 |
| PVC insulated ribbon cable with a pitch of 1 27 mm suitable for insulation displacement termination | GB/T 14316-2008 | 2009-4-1 |
| Test method on a single wire or cable under fire conditions - Part 2: Horizontal specimen flame test | GB/T 12666.2-2008 | 2009-4-1 |
| Flexible rubber-sheathed cables for mining purposes - Part 4：Flexible coalcutter cables with individual metallic screens for rated voltages up to 1.9/3.3kV | GB/T 12972.4-2008 | 2009-4-1 |
| Tests on electric and optical fibre cables under fire conditions - Part 32: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A F/R | GB/T 18380.32-2008 | 2009-4-1 |
| Flexible rubber-sheathed cables for mining purposes - Part 3：Trailing coalcutter cables with monitoring core and semiconducting screens for rated voltage of 0.66/1.14kV | GB/T 12972.3-2008 | 2009-4-1 |
| Tests on electric and optical fibre cables under fire conditions - Part 11: Test for vertical flame propagation for a single insulated wire or cable - Apparatus | GB/T 18380.11-2008 | 2009-4-1 |
| Paper-insulated power cables and their accessories with rated voltages up to and including 35kV - Part 1: General and construction requirements for power cables with rated voltages up to and including 30kV | GB/T 12976.1-2008 | 2009-4-1 |
| Common test methods for insulating and sheathing materials of electric and optical cables - Part 31: Methods specific to PVC compounds - Pressure test at high temperature - Test for | GB/T 2951.31-2008 | 2009-4-1 |
| Tests on electric and optical fibre cables under fire conditions - Part 34: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category B | GB/T 18380.34-2008 | 2009-4-1 |
| Aerial insulated cables for rated voltage of 10kV | GB/T 14049-2008 | 2009-4-1 |
| Tests on electric and optical fibre cables under fire conditions - Part 36: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category D | GB/T 18380.36-2008 | 2009-4-1 |
| Flexible rubber-sheathed cables for mining purposes - Part 5：Flexible cables for rated voltages up to 0.66/1.14kV | GB/T 12972.5-2008 | 2009-4-1 |
| Flexible rubber-sheathed cables for mining purposes - Part 6：Flexible cables with screens for rated voltages up to 6/10kV | GB/T 12972.7-2008 | 2009-4-1 |
| Flexible rubber-sheathed cables for mining purposes - Part 9：Flexible light-duty cables for rated voltage of 0.3/0.5kV | GB/T 12972.9-2008 | 2009-4-1 |
| Common test methods for insulating and sheathing materials of electric and optical cables - Part 42: Methods specific to polyethylene and polypropylene compounds - Tensile strength a | GB/T 2951.42-2008 | 2009-4-1 |
| Aerial insulated cables for rated voltages up to and including 1kV | GB/T 12527-2008 | 2009-4-1 |
| Test method on a single wire or cable under fire conditions - Part 3: Slanting specimen flame test | GB/T 12666.3-2008 | 2009-4-1 |
| Tests on electric and optical fibre cables under fire conditions - Part 13: Test for vertical flame propagation for a single insulated wire or cable - Procedure for determination of | GB/T 18380.13-2008 | 2009-4-1 |
| Common test methods for insulating and sheathing materials of electric and optical cables - Part 32: Methods specific to PVC compounds - Loss of mass test - Thermal stability test | GB/T 2951.32-2008 | 2009-4-1 |
| Tests on electric and optical fibre cables under fire conditions - Part 22: Test for vertical flame propagation for a single small insulated wire or cable - Procedure for diffusion | GB/T 18380.22-2008 | 2009-4-1 |
| Common test methods for insulating and sheathing materials of electric and optical cables - Part 41: Methods specific to polyethylene and polypropylene compounds - Resistance to envi | GB/T 2951.41-2008 | 2009-4-1 |
| Rail vehicle cables with rated voltages up to and including 3kV | GB/T 12528-2008 | 2009-4-1 |
| Flexible rubber-sheathed cables for mining purposes - Part 1：General requirements | GB/T 12972.1-2008 | 2009-4-1 |
| Power cables with cross-linked polyethylene insulation and their accessories for rated voltage of 500kV (Um=550kV) - Part2: Power cables with cross-linked polyethylene insulation for | GB/T 22078.2-2008 | 2009-4-1 |
| Plastic Insulated Control Cables - Part 1: General Requirements | GB/T 9330.1-2008 | 2009-4-1 |
| Markings for electric wires and cables - Part 4：Identifications of insulated conductors of cables and wires for electrical appliances and equipments | GB/T 6995.4-2008 | 2009-3-1 |
| Markings for electric wires and cables - Part 1: General requirements | GB/T 6995.1-2008 | 2009-3-1 |
| PVC insulated wire for ignition of electric detonators | GB/T 18014-2008 | 2009-3-1 |
| Markings for electric wires and cables - Part 2: Standard colours | GB/T 6995.2-2008 | 2009-3-1 |
| Markings for electric wires and cables - Part 3：Identifications of cables and wires | GB/T 6995.3-2008 | 2009-3-1 |
| Markings for electric wires and cables - Part 5: Identifications of insulated cores of power cables | GB/T 6995.5-2008 | 2009-3-1 |
| Railway digital signaling cable Part 6: Data transmission cable for balise | TB/T 3100.6-2008 | 2008-12-1 |
| The leaky coaxial cables for railway communication | TB/T 3201-2008 | 2008-12-1 |
| Equipments for electric wires and cables—Basic technical requirements—Part 11:Appearance quality | JB/T 7601.11-2008 | 2008-11-1 |
| Equipments for electric wires and cables—Basic technical requirements—Part 6:Machining process | JB/T 7601.6-2008 | 2008-11-1 |
| Equipments for electric wires and cables—Basic parameters—Part 8:Upward continuous casting machines | JB/T 5814.8-2008 | 2008-11-1 |
| Stranding machines for wires and cables—Technical requirements—Part 1:General | JB/T 5818.1-2008 | 2008-11-1 |
| Equipments for electric wires and cables—Basic technical requirements—Part 2:Inspection and acceptance | JB/T 7601.2-2008 | 2008-11-1 |
| Equipments for electric wires and cables—Testing methods—Part 2:LH Series drawing machines | JB/T 6756.2-2008 | 2008-11-1 |
| Equipments for electric wires and cables—Testing methods—Part 6:JLC Type frame stranding machines | JB/T 6756.6-2008 | 2008-11-1 |
| Cabling machines for wires and cables—Technical requirements—Part 5:Drum twisting machines | JB/T 10904.5-2008 | 2008-11-1 |
| Cabling machines for wires and cables—Types and sizes—Parts 5:Drum twisting machines | JB/T 10903.5-2008 | 2008-11-1 |
| Equipments for electric wires and cables—Basic parameters—Part 2:Drawing machines | JB/T 5814.2-2008 | 2008-11-1 |
| Equipments for electric wires and cables—Basic technical requirements—Part 7:Heat treatment | JB/T 7601.7-2008 | 2008-11-1 |
| Stranding machines for wires and cables—Types and sizes—Part 4:Cage stranding machines | JB/T 5817.4-2008 | 2008-11-1 |
| Equipments for electric wires and cables—Diveision and code of product classification—Part 5:Spools and dies | JB/T 5824.5-2008 | 2008-11-1 |
| PNS-type machine spool for processng of electric wire and cable -Part 1 :General | JB/T 7600.1-2008 | 2008-11-1 |
| Equipments for electric wires and cables—Basic technical requirements—Part 9:Assembling | JB/T 7601.9-2008 | 2008-11-1 |
| Terminology for plastic extrusion tooling | JB/T 8744-2008 | 2008-11-1 |
| Equipments for electric wires and cables—Basic parameters—Part 9:Contnuous casting and rolling machines | JB/T 5814.9-2008 | 2008-11-1 |
| Cabling machines for wires and cables—Technical requirements—Part 4:Cage type cabling machines | JB/T 10904.4-2008 | 2008-11-1 |
| Equipments for electric wires and cables—Testing methods—Part 7:JLY Type cage stranding machines | JB/T 6756.7-2008 | 2008-11-1 |
| Cabling machines for wires and cables—Technical requirements—Part 3:Skip type cabling machines | JB/T 10904.3-2008 | 2008-11-1 |
| Equipments for electric wires and cables—Basic parameters—Part 6:Enamelling machines | JB/T 5814.6-2008 | 2008-11-1 |
| Equipments for electric wires and cables—Basic parameters—Part 7:Braiding machines | JB/T 5814.7-2008 | 2008-11-1 |
| Cabling machines for wires and cables—Types and sizes—Parts 1:General | JB/T 10903.1-2008 | 2008-11-1 |
| Equipments for electric wires and cables—Diveision and code of product classification—Part 1:General | JB/T 5824.1-2008 | 2008-11-1 |
| Equipments for electric wires and cables—Basic parameters—Part 4:Cabling machines | JB/T 5814.4-2008 | 2008-11-1 |
| Equipments for electric wires and cables—Basic technical requirements—Part 10:Electrical control equipments | JB/T 7601.10-2008 | 2008-11-1 |
| Stranding machines for wires and cables—Technical requirements—Part 3:Tubular stranding machines | JB/T 5818.3-2008 | 2008-11-1 |
| Equipments for electric wires and cables—Basic parameters—Part 3:Stranding machines | JB/T 5814.3-2008 | 2008-11-1 |
| Equipments for electric wires and cables—Basic technical requirements—Part 1:General | JB/T 7601.1-2008 | 2008-11-1 |
| Equipments for electric wires and cables—Testing methods—Part 7:CLY Type czbling machines | JB/T 6756.8-2008 | 2008-11-1 |
| Equipments for electric wires and cables—Basic technical requirements—Part 3:Casting | JB/T 7601.3-2008 | 2008-11-1 |
| PNS-type machine spool for processing of electric wire and cable—Part 4:Machine spool with corrugated plate | JB/T 7600.4-2008 | 2008-11-1 |
| PNS-type machine spool for processng of electric wire and cable -Part 2 :Machine spool with welded steel plate | JB/T 7600.2-2008 | 2008-11-1 |
| Stranding machines for wires and cables—Technical requirements—Part 4:Cage stranding machines | JB/T 5818.4-2008 | 2008-11-1 |
| Equipments for electric wires and cables—Testing methods—Part 7:QH Series enamelling machines | JB/T 6756.9-2008 | 2008-11-1 |
| Equipments for Electric Wires and Cables - Division and Code of Product Classification - Part 2:Main Machine, Set, Production Line | JB/T 5824.2-2008 | 2008-11-1 |
| Stranding machines for wires and cables—Types and sizes—Part 3:Tubular stranding machines | JB/T 5817.3-2008 | 2008-11-1 |
| Equipments for electric wires and cables—Testing methods—Part 5:JLC Type fork stranding machines | JB/T 6756.5-2008 | 2008-11-1 |
| Equipments for electric wires and cables—Testing methods—Part 1:General rules | JB/T 6756.1-2008 | 2008-11-1 |
| Equipments for electric wires and cables—Testing methods—Part 4:JG Series tubular stranding machines | JB/T 6756.4-2008 | 2008-11-1 |
| Equipments for electric wires and cables—Testing methods—Part 3:JS Series bunching machines | JB/T 6756.3-2008 | 2008-11-1 |
| PNS-type machine spool for processng of electric wire and cable -Part 3 :Machine spool with stamped steel plate | JB/T 7600.3-2008 | 2008-11-1 |
| Stranding machines for wires and cables—Types and sizes—Part 1:General | JB/T 5817.1-2008 | 2008-11-1 |
| Stranding machines for wires and cables—Technical requirements—Part 2:Bunching machines | JB/T 5818.2-2008 | 2008-11-1 |
| Equipments for electric wires and cables—Diveision and code of product classification—Part 4:Testing machine | JB/T 5824.4-2008 | 2008-11-1 |
| Cabling machines for wires and cables—Technical requirements—Part 1:General | JB/T 10904.1-2008 | 2008-11-1 |
| Equipments for electric wires and cables—Diveision and code of product classification—Part 3:Auxiliary equipment | JB/T 5824.3-2008 | 2008-11-1 |
| PNS-type machine spool for processng of electric wire and cable -Part 5 :Plastic machine spool | JB/T 7600.5-2008 | 2008-11-1 |
| Equipments for electric wires and cables—Basic parameters—Part 1:General | JB/T 5814.1-2008 | 2008-11-1 |
| Equipments for electric wires and cables—Basic parameters—Part 5:Extruding machines | JB/T 5814.5-2008 | 2008-11-1 |
| Cabling machines for wires and cables—Types and sizes—Parts 4:Cage type cabling machines | JB/T 10903.4-2008 | 2008-11-1 |
| Stranding machines for wires and cables—Types and sizes—Part 2:Bunching machines | JB/T 5817.2-2008 | 2008-11-1 |
| Drawing machines for wires and cables—Types and sizes | JB/T 5815-2008 | 2008-11-1 |
| Plastic extruding machines for wires and cables—Types and sizes | JB/T 5819-2008 | 2008-11-1 |
| Cabling machines for wires and cables—Types and sizes—Parts 3:Skip type cabling machines | JB/T 10903.3-2008 | 2008-11-1 |
| Equipments for electric wires and cables—Testing methods—Part 7:SP,SL Series plastic extruding machines | JB/T 6756.10-2008 | 2008-11-1 |
| Cabling machines for wires and cables—Types and sizes—Parts 2:Core bunching machines | JB/T 10903.2-2008 | 2008-11-1 |
| Equipments for electric wires and cables—Basic technical requirements—Part 8:Surface treatment | JB/T 7601.8-2008 | 2008-11-1 |
| Equipments for electric wires and cables—Basic technical requirements—Part 5:Forgings | JB/T 7601.5-2008 | 2008-11-1 |
| Cabling machines for wires and cables—Technical requirements—Part 2:Core bunching machines | JB/T 10904.2-2008 | 2008-11-1 |
| Equipments for electric wires and cables—Basic technical requirements—Part 3:Weldments | JB/T 7601.4-2008 | 2008-11-1 |
| Rubber insulated cables of rated voltages up to and including 450/750V - Part 4: Cords and flexible cables | GB/T 5013.4-2008 | 2008-9-1 |
| Rubber insulated cables of rated voltages up to and including 450/750V—Part 2:Test methods | GB/T 5013.2-2008 | 2008-9-1 |
| Multicore and symmetrical pair/quad cables for bbroadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables- Part 1: Generic spe | GB/T 21430.1-2008 | 2008-9-1 |
| Rubber insulated cables of rated voltages up to and including 450/750 V - Part 1:General requiremnts | GB/T 5013.1-2008 | 2008-9-1 |
| Rubber insulated cables of rated voltages up to and including 450/750V - Part 6：Arc welding electrode cables | GB/T 5013.6-2008 | 2008-9-1 |
| Rubber insulated cables of rated voltages up to and including 450/750 V - Part 5: Lift cables | GB/T 5013.5-2008 | 2008-9-1 |
| Rubber insulated cables of rated voltages up to and including 450/750V - Part 3: Heat resistant silicone insulated cables | GB/T 5013.3-2008 | 2008-9-1 |
| Rubber insulated cables of rated voltages up to and including 450/750V - Part 7：Heat resistant ethylene-vinyl acetate rubber insulated cables | GB/T 5013.7-2008 | 2008-9-1 |
| Enamelling machines for round winding wires and rectangular wires—Technical requirement | JB/T 5813-2008 | 2008-7-1 |
| Drawing machines for wires and cables-Technical requirements | JB/T 5816-2008 | 2008-7-1 |
| Enamelling Machines for Round Winding Wires and Rectangular Wires-Types and Sizes | JB/T 5812-2008 | 2008-7-1 |
| Plastic extruding machines for wires and cables-Technical requirements | JB/T 5820-2008 | 2008-7-1 |
| Test methods for electrical properties of electric cables and wires—Part 16:Surface resistance test | GB/T 3048.16-2007 | 2008-5-1 |
| Test methods for electrical properties of electric cables and wires—Part 1:General | GB/T 3048.1-2007 | 2008-5-1 |
| Test methods for electrical properties of electric cables and wires—Part 5:Test of insulation resistance | GB/T 3048.5-2007 | 2008-5-1 |
| Test methods for electrical properties of electric cables and wires—Part 2:Test of electrical resistivity of metallic materials | GB/T 3048.2-2007 | 2008-5-1 |
| Test methods for electrical properties of electric cables and wires—Part 11:Test for dielectric dissipation factor | GB/T 3048.11-2007 | 2008-5-1 |
| Test methods for electrical properties of electric cables and wires—Part 13: Impulse voltage test | GB/T 3048.13-2007 | 2008-5-1 |
| Test methods for electrical properties of electric cables and wires—Part 4:Test of DC resistance of conductors | GB/T 3048.4-2007 | 2008-5-1 |
| Test methods for electrical properties of electric cables and wires—Part 7:Tracking resistance test | GB/T 3048.7-2007 | 2008-5-1 |
| Test methods for electrical properties of electric cables and wires—Part 9:Spark test of insulated cores | GB/T 3048.9-2007 | 2008-5-1 |
| Multicore and symmetrical pair/quad cables for digitai communications to be used in harsh environments-Part 1:Generic specifications | GB/T 21204.1-2007 | 2008-5-1 |
| Test methods for electrical properties of electric cables and wires—Part 10:Spark test of extruded protective sheaths | GB/T 3048.10-2007 | 2008-5-1 |
| Test methods for electrical properties of electric cables and wires—Part 8:AC voltage test | GB/T 3048.8-2007 | 2008-5-1 |
| Test methods for electrical properties of electric cables and wires—Part 3:Test of volume resistivity of semi conducting rubbers and plastics | GB/T 3048.3-2007 | 2008-5-1 |
| Test methods for electrical properties of electric cables and wires—Part 12:Partial discharge test | GB/T 3048.12-2007 | 2008-5-1 |
| Test methods for electrical properties of electric cables and wires—Part 14:DC voltage test | GB/T 3048.14-2007 | 2008-5-1 |
| Laminated Metal Plastic Strip for Communication Cable and Optical Fibre Cable Part 2:Laminated Aluminium Plastic Strip | YD/T 723.2-2007 | 2008-1-1 |
| Laminated Metal Plastic Strip for Communication Cable and Optical Fibre Cable Part 1:General | YD/T 723.1-2007 | 2008-1-1 |
| Qualification test methods and requirements for tree retardant performance of medium voltage XLPE power cables | DL/T 1070-2007 | 2007-12-1 |
| Cold shrinkable accessories for extruded insualtion power cables with rated voltages from 6kV (Um=7.2kV) up to 35kV(Um=40.5kV)-Part 2:Straight joints | JB/T 10740.2-2007 | 2007-11-1 |
| Cold shrinkable accessories for extruded insualtion power cables with rated voltages from 6kV (Um=7.2kV) up to 35kV(Um=40.5kV) - Part 1: Terminations | JB/T 10740.1-2007 | 2007-11-1 |
| Separable connectors for extruded insulation power cables with rated voltages from 6kV (Um=7.2kV) up to 35kV(Um=40.5kV) | JB/T 10739-2007 | 2007-11-1 |
| Multicore and symmetrical pair/quad cables for digital communications-Part 21:Horizontal floor wiring-Blank detail specification | GB/T 18015.21-2007 | 2007-8-1 |
| Multicore and symmetrical pair/quad cables for digital communications-Part 41:Riser cables-Blank detail specification | GB/T 18015.41-2007 | 2007-8-1 |
| Multicore and symmetrical pair/quad cables for digital communications-Part 2:Horizontal floor wiring-Section specification | GB/T 18015.2-2007 | 2007-8-1 |
| Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V—Part 2:Terminations | GB/T 13033.2-2007 | 2007-8-1 |
| Mineral insulated cables and their terminations with a rated voltage not exceeding 750 | GB/T 13033.1-2007 | 2007-8-1 |
| Multicore and symmetrical pair/quad cables for digital communications—Part 6:Symmetrical pair/quad cables with transmission characteristics up to 600 MHz—Work area wiring—Sectional s | GB/T 18015.6-2007 | 2007-8-1 |
| Multicore and symmetrical pair/quad cables for digital communications-Part 3:Work area wiring-Sectional specification | GB/T 18015.3-2007 | 2007-8-1 |
| Multicore and symmetrical pair/quad cables for digital communications-Part 31:Work area wiring-Blank detail specification | GB/T 18015.31-2007 | 2007-8-1 |
| Multicore and symmetrical pair/quad cables for digital ccommunications—Part 42:Riser cables—Capability Approval—Sectional specification | GB/T 18015.42-2007 | 2007-8-1 |
| Multicore and symmetrical pair/quad cables for digital communications—Part 32:Work area wiring—Capability Approval—Sectional specification | GB/T 18015.32-2007 | 2007-8-1 |
| Multicore and symmetrical pair/quad cables for digital communications-Part 11:Capability Approval-Generic specification | GB/T 18015.11-2007 | 2007-8-1 |
| Heating cables with a rated voltage of 300/500 V for comfort heating and prevntion of ice formation | GB/T 20841-2007 | 2007-8-1 |
| Multicore and symmetrical pair/quad cables for digital communications—Part 5:Symmetrical pair/quad cables with transmission characteristics up to 600MHz—Horizontal floor wiring—Secti | GB/T 18015.5-2007 | 2007-8-1 |
| Multicore and symmetrical pair/quad cables for digital communications—Part 4:Riser cables-Sectional specification | GB/T 18015.4-2007 | 2007-8-1 |
| Multicore and symmetrical pair/quad cables for digital communications—Part 22:Horizontal floor wiring—Capability approval—Sectional specification | GB/T 18015.22-2007 | 2007-8-1 |
| Multicore and symmetrical pair/quad cables for digital communications—Part 1:Generic specification | GB/T 18015.1-2007 | 2007-8-1 |
| Test methods for determining mechanical physical and chemical properties of electric cables and wires-Part 8:Test for oxidative inductive time | JB/T 10696.8-2007 | 2007-7-1 |
| Test methods for determining mechanical physical and chemical properties of electric cables and wires-Part 5:Corrosion spread test | JB/T 10696.5-2007 | 2007-7-1 |
| Test methods for determining mechanical physical and chemical properties of electric cables and wires - Part 4: Test for copper naphthenate content of protective coverings | JB/T 10696.4-2007 | 2007-7-1 |
| Flexible cables and cords for winding leads of electric motors-Part2:Flexible cables and cords with maximum continuous operating temperature of 70℃ | JB/T 6213.2-2006 | 2007-7-1 |
| Flexible cables and cords for winding leads of electric motors-Part6:Flexible cables and cords with maximum continuous operating temperature of 125℃ & 150℃ | JB/T 6213.6-2006 | 2007-7-1 |
| Test methods for determining mechanical physical and chemical properties of electric cables and wires - Part 7:Tear test | JB/T 10696.7-2007 | 2007-7-1 |
| Test methods for determining mechanical physical and chemical properties of electric cables and wires - Part 2:Flexing test for flexible cables and wires | JB/T 10696.2-2007 | 2007-7-1 |
| Flexible cables and cords for winding leads of electric motors-Part5:Freon resistant cords | JB/T 6213.5-2006 | 2007-7-1 |
| Flexible cables and cords for winding leads of electric motors-Part3:Flexible cables and cords with maximum continuous operating temperature of 90℃ | JB/T 6213.3-2006 | 2007-7-1 |
| Flexible cables and cords for winding leads of electric motors-Part4:Flexible cables and cords with maximum continuous operating temperature of 180℃ | JB/T 6213.4-2006 | 2007-7-1 |
| Test methods for determining mechanical physical and chemical properties of electric cables and wires - Part 1: General | JB/T 10696.1-2007 | 2007-7-1 |
| Test methods for determining mechanical physical and chemical properties of electric cables and wires - Part 3:Bending test | JB/T 10696.3-2007 | 2007-7-1 |
| Test methods for determining mechanical physical and chemical properties of electric cables and wires-Part 6:Test for abrasion of oversheaths | JB/T 10696.6-2007 | 2007-7-1 |
| Flexible cables and cords for winding leads of electric motors-Part 1:general | JB/T 6213.1-2006 | 2007-7-1 |
| Premolded accessories (slip-on type) for extruded insulation power cables with rated voltages from 6kV (Um=7.2kV) up to 35kV (Um=40.5kV) Part 2:Straight | JB/T 8503.2-2006 | 2007-4-1 |
| Porcelain bushing terminations for power cables with rated voltage of 35kV(Um=40.5kV) | JB/T 6465-2006 | 2007-4-1 |
| Electrical installations in ships - Shipboard power cables - General construction and test requirements | GB/T 20637-2006 | 2007-4-1 |
| Taped straight joints for extruded insulation power cables with rated voltages from 1kV(Um=1.2kV) up to 35kV(Um=40.5kV) | JB/T 6464-2006 | 2007-4-1 |
| Premolded accessories (slip-on type) for extruded insulation power cables with rated voltages from 6kV (Um=7.2kV) up to 35kV (Um=40.5kV) Part | JB/T 8503.1-2006 | 2007-4-1 |
| Copper-conductor extruded plastic insulated cables with pre-fabricated branches for rated voltage of 0.6/1kV(Um=1.2kV) | JB/T 10636-2006 | 2007-4-1 |
| Heat-shrinkable terminations for power cables with rated voltages from 1kV (Um=1.2kV) up to 35kV (Um=40.5kV) | JB/T 7829-2006 | 2007-2-1 |
| Cast resin straight joints for power cables with rated voltages from 1kV (Um=1.2kV) up to 10kV (Um=12kV) | JB/T 7832-2006 | 2007-2-1 |
| Porcelain bushing terminations for paper insulation power cables with rated voltages from 1kV(Um=1.2kV) up to 10kV(Um=12kV) | JB/T 6466-2006 | 2007-2-1 |
| Taped terminations for extruded insulation power cables with rated voltages from 1kV(Um=1.2kV) up to 10kV(Um=12kV) | JB/T 6468-2006 | 2007-2-1 |
| Cast resin terminations for power cables with rated voltages from 1kV (Um=1.2kV) up to 10kV (Um=12kV) | JB/T 7831-2006 | 2007-2-1 |
| Heat-shrinkable straight joints for extruded insulation power cables with rated voltages from 1kV (Um=1.2kV) up to 10kV (Um=12kV) | JB/T 7830-2006 | 2007-2-1 |
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V Part 6: Lift cables and cables for flexible connections | GB/T 5023.6-2006 | 2006-12-1 |
| Technical requirements of heat shrinkable accessories for power cable with rated voltages up to 35kV（Um=40.5kV） | DL/T 413-2006 | 2006-10-1 |
| Flame retardant and fire resistant wires and cables | GB/T 19666-2005 | 2005-8-1 |
| Technical Specifications for Polyurethane Cold Glue of Rubber Sheathed Flexible Cable Used in Mine | MT/T 351.1-2005 | 2005-6-1 |
| Technical qualification resist burning detonate generatrix in coal mine | MT/T 930-2005 | 2005-6-1 |
| Test Methods for Castable of Polyurethane Cold Glue of Rubber Sheathed Flexible Cable Used in Mine | MT/T 351.4-2005 | 2005-5-1 |
| Test Methods for Component A of Polyurethane Cold Glue of Rubber Sheathed Flexible Cable Used in Mine | MT/T 351.3-2005 | 2005-5-1 |
| Preparation Method of Cast Sample of Polyurethane Cold Glue of Rubber Sheathed Flexible Cable Used in Mine | MT/T 351.2-2005 | 2005-5-1 |
| Cross-linked polyolefin insulated wires and cables with rated voltages up to and including 450/750V Part2: | JB/T 10491.2-2004 | 2005-4-1 |
| Cross-linked polyolefin insulated wires and cables with rated voltages up to and including 450/750V Part1: General requirements | JB/T 10491.1-2004 | 2005-4-1 |
| Cross-linked polyolefin insulated wires and cables with rated voltages up to and including 450/750V Part3: | JB/T 10491.3-2004 | 2005-4-1 |
| Cross-linked polyolefin insulated wires and cables with rated voltages up to and including 450/750V Part4 | JB/T 10491.4-2004 | 2005-4-1 |
| Characteristics of termite resistant jacketing materials for electrical cable and optical cable part 2:polyolefin copolymer | YD/T 1020.2-2004 | 2005-1-1 |
| Characteristics of termite resistant jacketing materials for electrical cable and optical cable part 1:polyamide | YD/T 1020.1-2004 | 2005-1-1 |
| Cables radio frequency flexible solid polyethylene dielectric type SYV-50-3-51 and SYYZ-50-3-51 detail specification for | SJ 50973/15-2004 | 2004-12-1 |
| Cables radio frequency flexible solid polyethylene dielectric type SYV-50-7-51 、SYV-50-7-52 、SYYZ-50-7-51 and SYYZ-50-7-52 detail specification for | SJ 50973/18-2004 | 2004-12-1 |
| Cables radio frequency flexible solid polyethylene dielectric type SYV-50-7-53 and SYYZ-50-7-53 detail specification for | SJ 50973/19-2004 | 2004-12-1 |
| Cables radio frequency flexible solid polyethylene dielectric type SYV-75-5-51 and SYYZ-75-5-51 detail specification for | SJ 50973/20-2004 | 2004-12-1 |
| Cables radio frequency flexible solid polyethylene dielectric type SYV-50-5-51 and SYYZ-50-5-51 detail specification for | SJ 50973/17-2004 | 2004-12-1 |
| Cables radio frequency flexible solid polyethylene dielectric type SYV-50-3-52 and SYYZ-50-3-52 detail specification for | SJ 50973/16-2004 | 2004-12-1 |
| Cables radio frequency flexible solid polyethylene dielectric type SYV-50-2-51 and SYYZ-50-2-51 detail specification for | SJ 50973/13-2004 | 2004-12-1 |
| Cables radio frequency flexible solid polyethylene dielectric type SYV-75-7-53 and SYYZ-75-7-53 detail specification for | SJ 50973/21-2004 | 2004-12-1 |
| Cables radio frequency flexible solid polyethylene dielectric type SYV-50-2-52 and SYYZ-50-2-52 detail specification for | SJ 50973/14-2004 | 2004-12-1 |
| The specification of the field audio frequency cable | SJ 20899-2004 | 2004-12-1 |
| Railway digital signaling cable Part 1: General | TB/T 3100.1-2004 | 2004-10-23 |
| Railway digital signaling cable Part 5: Railway digital signaling cable with screened unit | TB/T 3100.5-2004 | 2004-10-23 |
| Railway digital signaling cable Part 3: Railway digital signaling cable with composite sheath | TB/T 3100.3-2004 | 2004-10-23 |
| Railway digital signaling cable Part 4: Railway digital signaling cable with Al sheath | TB/T 3100.4-2004 | 2004-10-23 |
| Railway digital signaling cable Part 2: Railway digital signaling cable with plastic sheath | TB/T 3100.2-2004 | 2004-10-23 |
| Cross-linked polyvinyl chloride insulated wires and cables of rated voltages up to and including 450/750V | JB/T 10438-2004 | 2004-8-1 |
| Inspection methods for partial discharge testing system of electric cables | JB/T 10435-2004 | 2004-8-1 |
| Tests for electric cables under fire conditions - Circuit integrity - Part 11: Apparatus - Fire alone at a flame temperature of at least 750℃ | GB/T 19216.11-2003 | 2004-2-1 |
| Tests for electric cables under fire conditions - Circulit integrity - Part 25: Procedures and requirements - Optical fibre cables | GB/T 19216.25-2003 | 2004-2-1 |
| Tests for electric cables under fire conditions - Circuit integrity - Part 23: Procedures and requirements - Electric data cables | GB/T 19216.23-2003 | 2004-2-1 |
| Tests for electric cables under fire conditions - Circuit integrity - Part 21: Procedures and requirements - Cable of rated voltage up to and including 0.6/1.0 kV | GB/T 19216.21-2003 | 2004-2-1 |
| Electrical installations in ships - Choice and installation of cables for low-voltage power systems | GB/T 13029.1-2003 | 2004-1-1 |
| Cable supports system | QB/T 1453-2003 | 2003-10-1 |
| Laminated metal plastic foil for telecommunication cable shielding | SJ/T 11284-2003 | 2003-10-1 |
| Iocal telecommunications cable for broadband applications polyolefin insulated copper conductors laminated aluminium polyethylene sheath | YD/T 1281-2003 | 2003-7-7 |
| Insulated cables (wires) for railway vehicles of rated voltages up to and including 3 kV Amendment 1: Cross-linked polyolefin insulated cables (wires) for railway vehicles | GB 12528.11-2003 | 2003-7-1 |
| Electric cables-test methods for accessories for power cables with rated voltage from 6kV (Um=7.2kV) up to 35kV (Um=40.5kV) | GB/T 18889-2002 | 2003-6-1 |
| Power cables with cross-linked polyethylene insulation and their accessories for rated voltage of 220kV(Um=252kV) - Part 3: Accessories for power cables with cross-linked polyethylen | GB/Z 18890.3-2002 | 2003-6-1 |
| Power cables with cross-linked polyethylene insulation and their accessories for rated voltage of 220kV (Um=252kV) - Part 1: Power cable systems-cables with cross-linked polyethylene | GB/Z 18890.1-2002 | 2003-6-1 |
| Power cables with cross-linked polyethylene insulation and their accessories for rated voltage of 220kV (Um=252kV) - Part 2: Power cables with cross-linked polyethylene insulation fo | GB/Z 18890.2-2002 | 2003-6-1 |
| Power cables with cross-linded polyethylene insulation and their accessories for rated voltage of 110 kv - Part 2: Power cables with cross-linded polyethylene insulation for rated vo | GB/T 11017.2-2002 | 2003-4-1 |
| Power cables with cross-linded polyethylene insulation and their accessories for rated voltage of 110 kV - Part 3: Accessories for power cables with cross-linded polyethylene insulat | GB/T 11017.3-2002 | 2003-4-1 |
| Power cables with extruded insulation and their accessories for rated voltages from 1kV (Um=1.2kV) up to 35kV (Um=40.5kV)-Part 3:Cables for rated voltages of 35kV(Um=40.5kV) | GB/T 12706.3-2002 | 2003-4-1 |
| Power cables with cross-linked polyethylene insulation and their accessories for rated voltage of 110kV - Part 1: Test methods and requirements | GB/T 11017.1-2002 | 2003-4-1 |
| Power cables with extruded insulation and their accessories for rated voltages from 1kV (Um=1.2kV) up to 35kV (Um=40.5kV)-Part 1:Cables for rated voltages of 1kV(Um=1.2kV) and 3kV(Um=3.6kV) | GB/T 12706.1-2002 | 2003-4-1 |
| Power cables with extruded insulation and their accessories for rated voltages from 1kV (Um=1.2kV) up to 35kV (Um=40.5kV)-Part 1:Cables for rated voltages from 6kV(Um=7.2kV) up to 30kV(Um=36kV) | GB/T 12706.2-2002 | 2003-4-1 |
| Power cables with extruded insulation and their accessories for rated voltages from 1kV (Um=1.2kV) up to 35kV (Um=40.5kV)-Part 4:Test requirmeents on accessories for cables with rated voltages from 6kV(Um=7.2kV) up to 35kV(Um=40.5kV) | GB/T 12706.4-2002 | 2003-4-1 |
| Tests on electric cables under fire conditions-Part 2:Test on a single small vertical insulated copper wire or cable | GB/T 18380.2-2001 | 2001-12-1 |
| Calculation of maximum external diameter of cables for indoor installations | GB/T 18212-2000 | 2001-7-1 |
| Telecommunication cable. Foamed polyethylene dielectric leaky coaxial cable | YD/T 1120-2001 | 2001-7-1 |
| Guide to the calculation of resistance of plain and coated copper conductor of low-frequency cables and wires | GB/T 18213-2000 | 2001-7-1 |
| Technological standards for making heat-shrinkable cable heads used in metallurgical enterprises | YB/T 182-2000 | 2001-3-1 |
| Tests on electric cables under fire conditions-Part 3:Tests on bunched wires or cables | GB/T 18380.3-2001 | 2001-1-2 |
| Tests on electric cables under fire conditions-Part 1:Test on a single vertical insulated wire or cable | GB/T 18380.1-2001 | 2001-1-2 |
| Basic technical requirements for power cable accessories with voltages up to 26/35kV--Power cable terminations | GB 11033.2-1989 | 2000-8-1 |
| Basic technical requirements for power cable accessories with rated voltages up to 26/35kV--Power cable joints | GB 11033.3-1989 | 2000-8-1 |
| Multicore and symmetrical pair/quad cables for digital communications-Part 2:Horizontal floor wiring-Sectional specification | GB/T 18015.2-1999 | 2000-5-1 |
| Multicore and symmetrical pair/quad cables for digital communications-Part 7:Riser cables-Blank detail specification | GB/T 18015.7-1999 | 2000-5-1 |
| Multicore and symmetrical pair/quad cables for digital communications-Part 4:Work area wiring-Sectional specification | GB/T 18015.4-1999 | 2000-5-1 |
| Multicore and symmetrical pair/quad cables for digital communications-Part 3:Horizontal floor wiring-Blank detail specification | GB/T 18015.3-1999 | 2000-5-1 |
| Multicore and symmetrical pair/quad cables for digital communications-Part 1:Generic specification | GB/T 18015.1-1999 | 2000-5-1 |
| Multicore and symmetrical pair/quad cables for digital communications-Part 6:Riser cables-Sectional specification | GB/T 18015.6-1999 | 2000-5-1 |
| Multicore and symmetrical pair/quad cables for digital communications-Part 5:Work area wiring-Blank detail specification | GB/T 18015.5-1999 | 2000-5-1 |
| Low-frequency telecommunication cable and wires with PVC insulation and PVC sheath - Part 2: Cables in pairs, triples, quads and quintuples for inside installation | GB/T 11327.2-1999 | 2000-3-1 |
| Low-frequency telecommunication cables and wires with PVC insulation and PVC sheath - Part 1: General test and measuring methods | GB/T 11327.1-1999 | 2000-3-1 |
| Low-frequency telecommunication cables and wires with PVC insulation and PVC sheath-Part 3: Terminating cables in pairs | GB/T 11327.3-1999 | 2000-3-1 |
| Delivery Drums for Electric Wires and Cables - Part 4: Steel Shapes Composite Delivery Drums | JB/T 8137.4-1999 | 2000-1-1 |
| Guide to the Selection of High-voltage Cables | JB/T 8996-1999 | 2000-1-1 |
| Load bearable detective cable | JB/T 3302-1999 | 2000-1-1 |
| Road vehicles-low voltage cables(wires) | JB/T 8139-1999 | 2000-1-1 |
| Delivery Drums for Electric Wires and Cables - Part 2: Wood Delivery Drums | JB/T 8137.2-1999 | 2000-1-1 |
| Measurement of smoke density of cables burning under defined conditions - Part 2 : Test procedure and requirements | GB/T 17651.2-1998 | 1999-10-1 |
| Test on gases evolved during combustion of materials from cables - Part 2: Determination of degree of acidity of gases by measuring pH and conductivity | GB/T 17650.2-1998 | 1999-10-1 |
| Measurement of smoke density of cables burning under defined conditions - Part 1 : Test apparatus | GB/T 17651.1-1998 | 1999-10-1 |
| Test on gases evolved during combustion of materials from cables - Part 1: Determination of the amount of halogen acid gas | GB/T 17650.1-1998 | 1999-10-1 |
| Flame retardant cables intended to be used in coal mines Unit 3: Flame retardant communication cables intended to be used in coal mines | MT 818.14-1999 | 1999-8-1 |
| Flame retardant cables intended to be used in coal mines Unit 2: Copper-cored flame retardant power supply cables laid out in a fixed way in coal mines with rated voltage of 10kV and below Part 1 General regulations | MT 818.11-1999 | 1999-8-1 |
| Specifications and methods of measurement on coaxial cable with physically - Foamed polyethylene insulation used in CATV systems | GY/T 135-1998 | 1999-4-1 |
| Specifications and methods of measurement on coaxial cable with bamboo type polyethylene insulation used in CATV systems | GY/T 136-1998 | 1999-4-1 |
| Polyvinyl chloride insulated cables and wires and cords of rated voltages up to and including 450/750V Part 5: Screened wires | JB 8734.5-1998 | 1998-11-5 |
| Polyvinyl chloride insulated cables and wires and cords of rated voltages up to and including 450/750V Part 3: Cords for connecting | JB 8734.3-1998 | 1998-11-3 |
| Conductors of insulated cables | GB/T 3956-1997 | 1998-11-1 |
| Polyvinyl chloride insulated cables and wires and cords of rated voltages up to and including 450/750V Part 1: General requirements | JB 8734.1-1998 | 1998-11-1 |
| Rubber insulated cables of rated voltages up to and including 450/750V Part 7:Heat resistant ethylene-vinyl acetate rubber insulated cables | GB 5013.7-1997 | 1998-10-1 |
| Common test methods for insulating and sheathing materials of electric cables-Part 4: Methods specific to polyethylene and polypropylene compounds-Section one:Resistance to environmental stress cracking-Wrapping test after thermal ageing ageing in | GB/T2951.8-1997 | 1998-10-1 |
| Rubber insulated cables of rated voltages up to and including 450/750V Part 3:Heat resistant silicone insulated cables | GB 5013.3-1997 | 1998-10-1 |
| Rubber insulated cables of rated voltages up to and including 450/750V Part 1:General requirements | GB 5013.1-1997 | 1998-10-1 |
| Common test methods for insulating and sheathing materials of electric cable Part 4: Methods specific to polyethylene and polypropylene compounds Section two: Elongation at break after pre-conditioning―Wrapping test after pre-conditioning―Wrapping test | GB/T 2951.9-1997 | 1998-10-1 |
| Rubber insulated cables of rated voltages up to and including 450/750V Part 4：Cords and flexible cables | GB 5013.4-1997 | 1998-10-1 |
| Common test methods for insulating and sheathing materials of electric cables--Part 2: Methods specific to elastomeric compounds section one--Ozone resistance test--Hot set test--Mineral oil immersion test | GB/T 2951.5-1997 | 1998-10-1 |
| Rubber insulated cables of rated voltages up to and including 450/750V Part 6:Arc welding cables | GB 5013.6-1997 | 1998-10-1 |
| Common test methods for insulating and sheathing materials of electric cables Part 5: Methods specific to filling compounds Section one: Drop-point―Separation of oil―Lower temperature brittleness―Total acid number―Absence of corrosive components―Perm | GB/T 2951.10-1997 | 1998-10-1 |
| Common test methods for insulating and sheathing materials of electric cables Part 3: Methods specific to PVC compounds Section two：Loss mass test―Thermal stability test | GB/T 2951.7-1997 | 1998-10-1 |
| Common test methods for insulating and sheathing materials of electric cables Part 3: Methods specific to PVC compounds section one：Pressure test at high temperature―Test for resistance to cracking | GB/T 2951.6-1997 | 1998-10-1 |
| Common test methods for insulating and sheathing materials of electric cable--Part 1: Methods for general application--Section three: Methods for determining the density--Water absorption tests--Shrinkage test | GB/T 2951.3-1997 | 1998-10-1 |
| Rubber insulated cables of rated voltages up to and including 450/750V Part 2:Test methods | GB 5013.2-1997 | 1998-10-1 |
| Common test methods for insulating and sheating materials of electric cables Part 1:Methods for general application Section one:Measurement of thickness and overall dimensions―Tests for determining the mechanical properties | GB/T 2951.1-1997 | 1998-10-1 |
| Common test methods for insulating and sheating materials of electric cables--Part 1: Methods for general application--Section two: Thermal ageing methods | GB/T 2951.2-1997 | 1998-10-1 |
| Common test methods for insulating and sheathing materials of electric cables Part 1: Methods for general application | GB/T 2951.4-1997 | 1998-10-1 |
| Rubber insulated cables of rated voltages up to and including 450/750V Part 5:Lift cables | GB 5013.5-1997 | 1998-10-1 |
| Polyvinyl chloride insulated cables with rated voltage 450/750V and below - part 1: General requirements | GB 5023.1-1997 | 1998-9-1 |
| Polyvinyl chloride insulated cables of rated voltages up to and including 450 / 750V - Part 5: Flexible cables (flexible cords) | GB 5023.5-1997 | 1998-9-1 |
| Polyvinyl chloride insulated cables of rated voltages up to and including 450 / 750V - Part 3: Unshielded cables for fixed wiring | GB 5023.3-1997 | 1998-9-1 |
| Polyvinyl chloride insulated cables of rated voltages up to and including 450 / 750V - Part 2: Test methods | GB 5023.2-1997 | 1998-9-1 |
| Polyvinyl chloride insulated cables of rated voltages up to and including 450 / 750V - Part 6: Cables for elevator cables and flexible connections | GB 5023.6-1997 | 1998-9-1 |
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 7: 2-core or multi-conductor shielded and unshielded flexible cables | GB 5023.7-1997 | 1998-9-1 |
| Polyvinyl chloride insulated cables of rated voltages up to and including 450 / 750V - Part 4: Sheathed cables for fixed wiring | GB 5023.4-1997 | 1998-9-1 |
| 27.5 kV Single-phase Copper-cored Crosslinked Polyethylene Insulated Cable for Electric Railway | TB/T 2822-1997 | 1998-4-1 |
| Filling Paste for Communication Cables | JB/T 8502-1996 | 1997-7-1 |
| Optical Cable Connectors-Part 2: Outdoor Optical Cable Connectors | JB/T 8310.2-1996 | 1996-10-1 |
| Optical Cable Connectors-Part 1: General Rules | JB/T 8310.1-1996 | 1996-10-1 |
| Optical Cable Connectors-Part 3: Optical Fiber Cable Termination Junction Box | JB/T 8310.3-1996 | 1996-10-1 |
| Shipboard control cables--Shipboard natural-styrenebutadiene rubber insulated control cables | JB/T 8141.3-1995 | 1996-4-14 |
| Basic technical requirements for power cable accessories with rated voltages up to 26/35kV Power cable joints | JB/T 8144.3-1995 | 1995-10-10 |
| Basic technical requirements for power cable accessories with voltages up to 26/35kV Power cable terminations | JB/T 8144.2-1995 | 1995-10-10 |
| Insulated cables ( wires ) for railway vehicles of rated voltages up to and including 3 kV Chlorosulphonated polyethylene insulated cables ( wires ) for railway vehicles | JB/T 8145.2-1995 | 1995-10-10 |
| Leading Wire. Technical Specification | MT 376-1995 | 1995-5-1 |
| Test methods for determining electrical properties of electric cables and wires-A.C. voltage tests | GB/T 3048.8-1994 | 1995-1-1 |
| Test methods for properties of electric wire and cable | GB/T 3048.1-1994 | 1995-1-1 |
| Test methods for determining electrical properties of electric cables and wires-Measurement of resistivity of metallic conductive materials | GB/T 3048.2-1994 | 1995-1-1 |
| Test method for determining mechanical and physical properties of electric cables and wires General | GB/T 2951.1-1994 | 1995-1-1 |
| Test methods for determining electrical properties of electric cables and wires-Spark of extruded anti-corrosion protective sheaths | GB/T 3048.10-1994 | 1995-1-1 |
| Test methods for determining electrical properties of electric cables and wires-Determining insulation resistance-Voltmeter-ammeter method | GB/T 3048.6-1994 | 1995-1-1 |
| Test methods for determining electrical properties of electric cables and wires-Measurement of D.C. resistance of conductors | GB/T 3048.4-1994 | 1995-1-1 |
| Test methods for determining electrical properties of electric cables and wires-Dielectric dissipation factor measurement | GB/T 3048.11-1994 | 1995-1-1 |
| Test methods for determining electrical properties of electric cables and wires-Measurement of volumeresistivity of semi-conducting rubbers and plastics | GB/T 3048.3-1994 | 1995-1-1 |
| Test methods for determining electrical properties of electric cables and wires--Surface resistance test | GB/T 3048.16-1994 | 1995-1-1 |
| Test methods for determining electrical properties of electric cables and wires-Determining insulation resistance-Comparison-galvanometer method | GB/T 3048.5-1994 | 1995-1-1 |
| Test methods for determining electrical properties of electric cables and wires-Tracking resistance test | GB/T 3048.7-1994 | 1995-1-1 |
| Thermocouple Cables of Fluorine-Plastic Package - General Technical Conditions | QJ 2656-1994 | 1994-10-1 |
| Local telecommunication cables with polyolefin insulation and polyolefin sheath - Part 4: Unfilled,moisture barrier polyethylene sheathed local telecommunication cables with copper c | GB/T 13849.4-1993 | 1994-8-1 |
| telecommunication cables with polyolefin insulation and polyolefin sheath - Part 5: Moisture barrier polyethylene sheathed and seperated (inner-screened) local telecommunication | GB/T 13849.5-1993 | 1994-8-1 |
| Local telecommunication cables with polyolefin insulation and polyolefin sheath - Part 2: Unfilled, moisture barrier polyethylene sheathed local telecommunication cables with copper | GB/T 13849.2-1993 | 1994-8-1 |
| Local telecommunication cables with polyolefin insulation and polyolefin sheath - Part 3: Filled, moisture barrier polyethylene sheathed local telecommunication cables with copper co | GB/T 13849.3-1993 | 1994-8-1 |
| Railway Signal Plastic-sheathed Signal Cables | TB/T 2476.2-1993 | 1994-7-1 |
| Railway Signal Cables Aluminum-sheathed Signal Cables | TB/T 2476.4-1993 | 1994-7-1 |
| Railway Signal Cables Integrated Sheathed Signal Cables | TB/T 2476.3-1993 | 1994-7-1 |
| Railway Signal Cables General Regulations | TB/T 2476.1-1993 | 1994-7-1 |
