Code of China Chinese Classification Professional Classification ICS Classification Latest Value-added Services

Chinese National Standard List: Lamp accessories

Title Standard No. Implemented On
LED driver for lightingT/ZZB 0129-2016
Digital addressable lighting interface―Part 103:General requirements―Control devicesGB/T 30104.103-20172018-11-1
General performance requirements of the LED current light bulbDB52/T 1115-20162016-10-1
Single-ended metal halide lamps (Sc13-NaI series) with LC peak lead ballasts. Performance requirementsQB/T 2511-20162016-7-1
Glow-starters for Fluorescent LampsGB 20550-20132015-7-1
Digital Addressable Lighting Interface - Part 209: Particular Requirements for Control Gear - Colour Control (Device Type 8)GB/T 30104.209-20132014-11-1
Digital Addressable Lighting Interface - Part 201: Particular Requirements for Control Gear - Fluorescent Lamps (Device Type 0)GB/T 30104.201-20132014-11-1
Digital Addressable Lighting Interface - Part 206: Particular Requirements for Control Gear - Conversion from Digital Signal Into D. C. Voltage (Device Type 5)GB/T 30104.206-20132014-11-1
Digital Addressable Lighting Interface - Part 208: Particular Requirements for Control Gear - Switching Function (Device Type 7)GB/T 30104.208-20132014-11-1
Digital Addressable Lighting Interface - Part 210: Particular Requirements for Control Gears - Sequencer (Device Type 9)GB/T 30104.210-20132014-11-1
Digital Addressable Lighting Interface - Part 102: General Requirements - Control GearGB/T 30104.102-20132014-11-1
Digital Addressable Lighting Interface - Part 207: Particular Requirements for Control Gear - LED Modules (Device Type 6)GB/T 30104.207-20132014-11-1
Digital Addressable Lighting Interface - Part 204: Particular Requirements for Control Gear - Low Voltage Halogen Lamps (Device Type 3)GB/T 30104.204-20132014-11-1
Digital Addressable Lighting Interface - Part 203: Particular Requirements for Control Gear - Discharge Lamps (Excluding Fluorescent Lamps) (Device Type 2)GB/T 30104.203-20132014-11-1
Digital Addressable Lighting Interface - Part 202: Particular Requirements for Control Gear - Self-contained Emergency Lighting (Device Type 1)GB/T 30104.202-20132014-11-1
Digital addressable lighting interface—Part 101:General requirements—SystemGB/T 30104.101-20132014-11-1
Digital Addressable Lighting Interface - Part 205: Particular Requirements for Control Gear - Supply Voltage Controller for Incandescent Lamps (Device Type 4)GB/T 30104.205-20132014-11-1
Solder-free screw caps—Technical specificationQB/T 4541-20132014-3-1
Electronic controllers for solar photovoltaic (PV) lighting - Performance specifications GB/T 26849-20112011-12-15
Low-frequency square wave electronic ballasts for metal halide lampsGB/T 26697-20112011-12-1
Lamp controlgear—Part 1:General and safety requirementsGB 19510.1-20092010-12-1
Lamp controlgear—Part 10:Particular requirements for ballasts for discharge lamps(excluding fluorescent lamps)GB 19510.10-20092010-12-1
DC or AC supplied electronic control gear for LED modules—Performance requirementsGB/T 24825-20092010-5-1
Miscellaneous lampholders - Part 2-2: Particular requirements - Connectors for LED-modulesGB 19651.3-20082010-4-1
Miscellaneous lampholders - Part 1: General requirements and testsGB 19651.1-20082010-4-1
Capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety requirementsGB/T 18489-20082010-4-1
Capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety requirementsGB 18489-20082010-4-1
Miscellaneous lampholders - Part 2-1: Particular requirements - Lampholders S14GB 19651.2-20082010-4-1
Standard method of measurement of lamp cap temperature riseGB/T 24392-20092010-2-1
Types and dimensions of lampholders—Part 3:Prefocus lampholdersGB/T 19148.3-20092010-2-1
Edison screw lampholders specially used for explosion-proof liminairesGB 1444-20082010-2-1
Technical specification for lamp capsGB 2797-20082010-1-1
Lamp controlgear—Part 4:Particular requirements for a.c. supplied electronic ballasts for fluorescent lampsGB 19510.4-20092009-12-1
Lamp controlgear—Part 8:Particular requirements for d.c.supplied electronic ballasts for emergency lightingGB 19510.8-20092009-12-1
Lamp controlgear—Part 14:Particular requirements for d.c.or a.c.supplied electronic controlgear for LED modulesGB 19510.14-20092009-12-1
Lamp controlgear—Part 3:Particular requirements for d.c.or a.c. supplied electronic step-down convertors for filament lampsGB 19510.3-20092009-12-1
Lamp controlgear—Part 9:Particular requirements for ballasts for fluorescent lampsGB 19510.9-20092009-12-1
Lamp controlgear—Part 2:Particular requirements for starting devices (other than glow startersGB 19510.2-20092009-12-1
Types and dimensions of lampholders - Part 4: Miscellaneous lampholdersGB/T 19148.4-20082009-9-1
Preset power controller for high pressure sodium lamps - Performance requirementsGB/T 23142-20082009-9-1
Auxiliaries for lamps—Ballasts for discharge lamps(excluding tubular fluorescent lamps)—Performance requirementsGB/T 15042-20082009-9-1
Ballasts for tubular fluorescent lamps—Performance requirementsGB/T 14044-20082009-9-1
Gauges for caps and lampholders - Part 5: Gauges for bayonet caps and lampholdersGB/T 1483.5-20082009-5-1
Edison screw lampholdersGB 17935-20072009-1-1
Edison screw lampholdersGB/T 17935-20072009-1-1
Bayonet lampholdersGB/T 17936-20072009-1-1
Lampholders for tubular fluorescent lamps and starter holdersGB 1312-20072009-1-1
Lamp controlgear - Part 13: Particular requirements for d.c.or a.c. supplied electronic ballasts for discharge lamps(excluding fluorescent lamps)GB 19510.13-20072009-1-1
Bayonet lampholdersGB 17936-20072009-1-1
Transformers for tubular discharge lamps having a no-load output voltage exceeding 1000V(generally called neon-transformers)—Performance requirementsQB/T 2987-20082008-12-1
Types and dimentions of lamp caps - Part 2：Pin lamp capsGB/T 1406.2-20082008-12-1
Types and dimensions of lampholders - Part 5: Bayonet lampholdersGB/T 19148.5-20082008-12-1
Types and dimensions of lampholders - Part 2:Pin lampholdersGB/T 19148.2-20082008-12-1
Gauges for caps and lampholders - Part 2: Gauges for pin caps and lampholdersGB/T 1483.2-20082008-12-1
Gauges for lamp caps and holders - Part 1 : Gauges for screw caps and holdersGB/T 1483.1-20082008-12-1
Auxiliaries for lamps—Particular requirements for electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps(neon tubes)—Performance requirementsQB/T 2986-20082008-12-1
Types and dimensions of lamp caps - Part 4: Miscellaneous capsGB/T 1406.4-20082008-12-1
Types and dimensions of lampholder - Part 1：Screw lampholderGB/T 19148.1-20082008-12-1
Types and dimensions of lamp caps - Part 5：Bayonet capsGB/T 1406.5-20082008-12-1
Gauges for lamp caps and lampholders - Part 4: Gauges for miscellaneous caps and lampholdersGB/T 1483.4-20092008-12-1
Types and dimensions of lamp caps - Part 3：Prefocus capsGB/T 1406.3-20082008-12-1
Types and dimensions of lamp caps - Part 1：Screw capsGB/T 1406.1-20082008-12-1
Gauges for lamp caps and lampholders - Part 3: Gauges for prefocus caps and lampholdersGB/T 1483.3-20082008-12-1
Type designations for ballastsQB/T 2275-20082008-7-1
Preset-power reactor ballasts for high pressure sodium lampsQB/T 2941-20082008-7-1
Spotlight and reflector photoflood lampsQB/T 2061-20082008-7-1
Lamp caps and holders together with gauges for the control of safety and interchangeability—Part 4:Guidelines and general informationGB/T 21098-20072008-5-1
Rules for the inspection of lighting equipment for import and export - Part 8: Ballasts for tubular fluorescent lampsSN/T 1588.8-20072008-3-1
Rules for the inspection of lighting equipment for import and export-Part 7:Bayonet lampholdsSN/T 1588.7-20072008-3-1
Rules for the inspection of lighting equipment for import and export-Part 9:Starter for fluorescent lampsSN/T 1588.9-20072008-3-1
Auxiliaries for lamps-D.C. or A.C.supplied electronic ballasts for discharge lamps(excluding fluorescent lamps)-performance requirementsQB/T 2878-20072008-1-1
AC-supplied electronic ballasts for electrodeless fluorescent lampsQB/T 2871-20072007-8-1
Glow-starters for fluorescent lampsGB 20550-20062007-7-1
Barrel thread for E14 and E27 lampholders with shade holder ringGB/T 20144-20062006-11-1
Technical requirement for environmental labeling products Ballasts for tubular fluorescent lampsHJ/T 232-20062006-3-1
Miscellaneous Lampholders-part2:Particular requirements－Section1:Lampholders S14GB 19651.2-20052005-8-1
Lamp controlgear-Part5：Particular requirements for d.c.supplied electronic ballasts for general lightingGB 19510.5-20052005-8-1
Ballasts for tubular fluorescent lamps -GB/T 14044-20052005-8-1
Lamp controlgear-Part7：Particular requirements for d.c. supplied electronic ballasts for aircraft lightingGB 19510.7-20052005-8-1
Lamp controlgear-Part 2:Particular requirements for starting devices(other than glow starters)GB 19510.2-20052005-8-1
Miscellaneous Lampholders-Part1: General requirements and testsGB 19651.1-20052005-8-1
Lamp controlgear-Part8：Particular requirements for d.c. supplied electronic ballasts for emergency lightingGB 19510.8-20052005-8-1
A.C. supplied electronic ballasts for tubular fluorescent lamps-GB/T 15144-20052005-8-1
Auxiliaries for lamps - Starting devices (other than glow starters) - Performance requirementsGB/T 19655-20052005-8-1
Lamp controlgear - Part12: Particular requirements for miscellaneous electronic circuits used with luminairesGB 19510.12-20052005-8-1
DC supplied electronic ballasts for tubular fluorescent lamps-GB/T 19656-20052005-8-1
Auxiliaries for lamps - D.C.or A.C.supplied electronic step-down convertors for filament lamps - Performance requirementsGB/T 19654-20052005-8-1
Lamp controlgerar―Part 4:Particular requirements for a.c.supplied electronic ballasts for fluorescent lampsGB 19510.4-20052005-8-1
Lamp controlgear―Part 10:Particular requirements for ballasts for discharge lamps(excluding fluorescent lamps)GB 19510.10-20042005-2-1
Lamp controlgear―Part 1:General and safety requirementsGB 19510.1-20042005-2-1
Lamp controlgear-Part 3:Particular requirements for d.c.or a.c.supplied electronic step-down convertors for filament lampsGB 19510.3-20042005-2-1
Lamp controlgear―Part 9:Particular requirements for ballasts for fluorescent ampsGB 19510.9-20042005-2-1
Lamp controlgear - Particular requirements for electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps(neon tubes)GB 19510.11-20042005-2-1
Types and dimensions of cylindrical and recessed capsGB 1406.4-20032004-2-1
Gauges for lamp caps andholders--Part 6:Bayonet lampholdersGB/T 1483.6-20032004-2-1
Types and dimensions of lampholders―Part 5:Bayonet lampholdersGB 19148.5-20032004-2-1
Types and dimensions of pin lampholdersGB 19148.2-20032004-1-1
Types and dimensions of prefocus capsGB 1406.3-20032004-1-1
Transformers for tubular discharge lamps having a no-load output voltage exceeding 1 000 V(generally called neon-transformers)—General and safety requirementsGB 19149-20032004-1-1
Types and dimenstions of Edision lampholodersGB 19148.1-20032004-1-1
Transformers for tubular discharge lamps having a no-load output voltage exceeding 1 000 V(generally called neon-transformers)―General and safety requirementsGB/T 19149-20032004-1-1
Gauges of Edison screw lampholdersGB/T 1483.2-20022003-4-1
Gauges of prefocus capsGB/T 6998-20022003-4-1
Gauges for pin lampholdersGB/T 1483.3-20022003-4-1
Lampholders for tubular fluorescent lamps and starterholdersGB/T 1312-20022003-4-1
Capacitors for use in rubular fluorescent and other discharge lamp circuits--General and safety requirementsGB 18489-20012002-6-1
Types and dimensions of Edison screw lamp capsGB 1406-20012002-5-1
Types and dimensions of pin lamp capsGB 2799-20012002-5-1
Glass Tubes and Glass Stems for General Lighting LampsQB/T 2514-20012001-11-1
Performance Requirements on LC Peak Lead Ballasts for Single-ended Metal Halide Lamps QB/T 2511-20012001-11-1
General Technical Requirements for Glass Envelopes of Electrical Light SourcesQB/T 2513-20012001-11-1
Edison screw lampholdersGB 17935-19992000-8-1
Bayonet lampholdersGB 17936-19992000-8-1
General technical specifications for energy saving time-delay switchJG/T 7-19991999-6-4
Methods of measurement of lamp cap temperature riseQB/T 3733-19991999-4-21
Technical requirements of flexible pipe for luminairesQB/T 3740-19991999-4-21
Glass lampshade for civil use and building calibre sizeQB/T 3737.1-19991999-4-21
Types and dimensions of screw lamp holdersQB/T 3590-19991999-4-21
Glass lampshade for civil use and building calibre size of base frameQB/T 3737.2-19991999-4-21
Inspection Gauge for Bayonet Lamp HoldersQB/T 3589-19991999-4-21
Types and Dimensions of Bayonet Lamp HoldersQB/T 3588-19991999-4-21
Gauges of Edison Screw LampholdersQB/T 3591-19991999-4-21
Starters Intended to be Used in Fluorescent LampsQB 2276-19961997-9-1
Types and dimentions of bayonet lamp capsGB 1407-19961997-9-1
Type Designations for BallastsQB 2275-19961997-9-1
Types and Dimensions of Lampholders for Single-capped Fluorescent LampQB 2219-19961997-3-1
Model designation method of lamp caps and lamp holdersQB 2218-19961997-3-1
Glass Envelope of Electric Light Source Dimension of K Model Glass EnvelopeQB/T 2049.5-19941995-8-1
Glass Envelope of Electric Light Source - Dimension of BT Model Glass EnvelopeQB/T 2049.3-19941995-8-1
Glass Envelope of Electric Light Source - Dimension of G Model Glass EnvelopeQB/T 2049.4-19941995-8-1
Glass Envelope of Electric Light Source - Dimension of A Model Glass EnvelopeQB/T 2049.1-19941995-8-1
Glass Envelope of Electric Light Source - Dimension of M Model Glass Envelope QB/T 2049.6-19941995-8-1
Glass Envelope of Electric Light Source - Dimension of B Model Glass EnvelopeQB/T 2049.2-19941995-8-1
Glass Envelope of Electric Light Source - Dimension of R Model Glass EnvelopeQB/T 2049.8-19941995-8-1
Glass Envelope of Electric Light Source - Dimension of T Model Glass EnvelopeQB/T 2049.9-19941995-8-1
Glass Envelope of Electric Light Source - Dimension of P Model Glass EnvelopeQB/T 2049.7-19941995-8-1
A.Csupplied electronic ballests for tubuler fluorescent lamps. General and safety requirenentsGB 15143-19941995-1-1
A.C. supplied electronic ballasts for tubular fluorescent lamps－Performance requirementsGB/T 15144-19941995-1-1
Ballasts for tubular fluorescent lamps--Performance requirementsGB/T 14044-19931993-8-1
Ballasts for tubular fluorescent lamps general and safety requirementsGB 2313-19931993-8-1
Technical requiremnts of lampholders for tubular fluorescent lamps and starterholdersGB 1312-19911992-8-1
Gauges of lampholders for tubular fluorescent lamps and starterholdersGB/T 13261-19911992-8-1
Typs and dimensions of lampholders for tubular fluorescent lamps and starterholdorsGB 13260-19911992-8-1
Household and similar use light switchesGB/T 10979-19891990-1-1
Gauges of prefocus capsGB/T 6998-19861987-10-1
Gauges of pin capsGB/T 6997-19861987-10-1
Types and dimensions of cylindrical and recessed capsGB/T 2798-19811982-4-1
Types and dimensions of pin capsGB/T 2799-19811982-4-1
Types and dimensions of prefocus capsGB/T 2800-19811982-4-1
Lamp caps--Methods of type designationGB 1405-19781979-1-1
About Us   |    Contact Us   |    Terms of Service   |    Privacy   |    Cancellation & Refund Policy   |    Payment
Tel: +86-10-8572 5655 | Fax: +86-10-8581 9515 Email: coc@codeofchina.com | Send me a messageQQ: 672269886
Copyright: TransForyou Co., Ltd. 2008-2020