| Title |
Standard No. |
Implemented On |
| Electromagnetic compatibility—General—Part 3:The effects of high-altitude EMP(HEMP) on civil equipment and systems | GB/Z 17624.3-2021 | |
| Requirements and Measurement Methods of Electromagnetic Compatibility for the PoE port of Information Technology Equipment | YDB 141-2013 | |
| Electromagnetic compatibility—Testing and measurement techniques—Part 31：AC mains ports broadband conducted disturbance immunity test | GB/T 17626.31-2021 | 2022-7-1 |
| Specification for radio disturbance and immunity measuring apparatus and methods—Part 1-4:Radio disturbance and immunity measuring apparatus—Antennas and test sites for radiated disturbance measurements | GB/T 6113.104-2021 | 2022-7-1 |
| Information technology equipment, multimedia equipment and receivers—Electromagnetic compatibility—Part 1: Emission requirements | GB/T 9254.1-2021 | 2022-7-1 |
| Specification for radio disturbance and immunity measuring apparatus and methods—Part 1-1: Radio disturbance and immunity measuring apparatus—Measuring apparatus | GB/T 6113.101-2021 | 2022-7-1 |
| Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment | GB/T 17743-2021 | 2022-7-1 |
| Antennas and reception systems for radio interference—Part 1: Basic measurement—Method for far field measuring in microwave anechoic chamber | GB/T 40602.1-2021 | 2022-5-1 |
| Electromagnetic compatibility—General—Part 6：Guide to the assessment of measurement uncertainty | GB/Z 17624.6-2021 | 2022-5-1 |
| Electromagnetic compatibility—Risk assessment—Part 2:Electronic and electrical systems | GB/T 38659.2-2021 | 2022-5-1 |
| Antennas and reception systems for radio interference—Part 2:Basic measurement—Method for near field measuring high gain antenna pattern in microwave anechoic chamber | GB/T 40602.2-2021 | 2022-5-1 |
| Electrical self-balancing vehicle—Electromagnetic compatibility—Emission and immunity requirements | GB/T 40309-2021 | 2022-3-1 |
| Method for measuring the shielding effectiveness of electromagnetic shielding enclosures | GB/T 12190-2021 | 2021-12-1 |
| Test method on electromagnetic emissions—Part 3:Electronic control gear for LED modules | GB/T 22148.3-2021 | 2021-12-1 |
| Specification for radio disturbance and immunity measuring apparatus and methods—Part 1-3:Radio disturbance and immunity measuring apparatus—Ancillary equipment—Disturbances power | GB/T 6113.103-2021 | 2021-12-1 |
| Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure | GB/T 39640-2020 | 2021-7-1 |
| Specification for radio disturbance and immunity measuring apparatus and methods—Part 2-3:Methods of measurement of disturbances and immunity—Radiated disturbance measurements | GB/T 6113.203-2020 | 2021-7-1 |
| Method for measuring the shielding effectiveness of shielding enclosures having all dimensions between 0.1 m and 2 m | GB/T 39278-2020 | 2021-6-1 |
| Specification for radio disturbance and immunity measuring apparatus and methods—Part 4-3: Uncertainties,statistics and limit modelling—Statistical considerations in the determination of EMC compliance of mass-produced products | GB/Z 6113.403-2020 | 2021-6-1 |
| Antennas and reception systems for radio interference- A ntenna measurement-Vehicle antennas and system | GB/T 38889-2020 | 2020-12-1 |
| Electromagnetic compatibility—Risk assessment—Part 1：Electronic and electrical device | GB/T 38659.1-2020 | 2020-10-1 |
| Industrial,scientific and medical equipment—Radio-frequency disturbance characteristics—Limits and methods of measurement | GB 4824-2019 | 2020-7-1 |
| Industrial, scientific and medical robots -- Electromagnetic compatibility -- Emission methods of measurement and limits | GB/T 38336-2019 | 2020-7-1 |
| Industrial, scientific and medical robots -- Electromagnetic compatibility -- Immunity tests | GB/T 38326-2019 | 2020-7-1 |
| Specification for radio disturbance and immunity measuring apparatus and methods—Part 3:CISPR technical reports | GB/Z 6113.3-2019 | 2020-3-1 |
| Electrostatics—Part 2-3:Methods of test for determining the resistance and resistivity of solid planar materials used to avoid electrostatic charge accumulation | GB/T 37977.23-2019 | 2020-3-1 |
| Electrostatics—Part 3-2:Methods for simulation of electrostatic effects—Machine model(MM) electrostatic discharge test waveform | GB/T 37977.32-2019 | 2020-3-1 |
| Aluminum alloy extruded tubes for non-nuclear grade nuclear power cooling systems | GB/Z 37627.1-2019 | 2020-1-1 |
| Radio interference characteristics of overhead power lines and high-voltage equipment—Part 3:Code of practice for minimizing the generation of radio noise | GB/Z 37627.3-2019 | 2020-1-1 |
| Electromagnetic compatibility—Testing and measurement techniques－Surge immunity test | GB/T 17626.5-2019 | 2020-1-1 |
| Electromagnetic compatibility—Environment—Description and classification of electromagnetic environments | GB/Z 18039.1-2019 | 2020-1-1 |
| Measurement method for total electric field strength and ion current density of DC transmission line and converter station | GB/T 37543-2019 | 2020-1-1 |
| Service robot machine-Electromagnetic compoatibility-Generic standards-Immunity requirements and limits | GB/T 37283-2019 | 2019-10-1 |
| Service robot machine—Electromagnetic compatibility—Generic standards—Emission requirements and limits | GB/T 37284-2019 | 2019-10-1 |
| Specification for radio disturbance and immunity measuring apparatus and methods—Part 1-5:Radio disturbance and immunity measuring apparatus—Antenna calibration sites and refernce test sites for 5 MHz to 18 GHz | GB/T 6113.105-2018 | 2019-7-1 |
| Guide of risk assessment of EMC reliability | GB/Z 37150-2018 | 2019-7-1 |
| Requirements for EMC measurement methods for DC powered equipment | GB/T 37139-2018 | 2019-7-1 |
| Specification for radio disturbance and immunity measuring apparatus and methods—Part 2-1:Methods of measurement of disturbances and immunity—Conducted disturbance measurements | GB/T 6113.201-2018 | 2019-7-1 |
| General requirements and test methods of electromagnetic compatibility for wireless power transmission equipment | GB/T 37132-2018 | 2019-7-1 |
| Specification for radio disturbance and immunity measuring apparatus and methods—Part 1-6:Radio disturbance and immunity measuring apparatus—EMC antenna calibration | GB/T 6113.106-2018 | 2019-7-1 |
| Electromagnetic compatibility requirements for household appliances,electric tools and similar apparatus-Part 1:Emission | GB 4343.1-2018 | 2019-2-1 |
| Specification for radio disturbance and immunity measuring apparatus and methods—Part 1-2:Radio disturbance and immunity measuring apparatus—Coupling devices for conducted disturbance measurements | GB/T 6113.102-2018 | 2019-2-1 |
| Vehicles,boats and internal combustion engines-Radio disturbance characteristics-Limits and methods of measurement for the protection of on-board receivers | GB/T 18655-2018 | 2019-2-1 |
| Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burstimmunity test | GB/T 17626.4-2018 | 2019-1-1 |
| Electromagnetic compatibility—Testing and measurement techniques－Electrostaic discharge immunity test | GB/T 17626.2-2018 | 2019-1-1 |
| Measurement method on conductive properties of electromagnetic shielding material and bonding impedance of metal material for 30 MHz to 1 GHz | GB/T 35033-2018 | 2018-12-1 |
| Electromagnetic compatibility(EMC)—Environment—Description of HEMP environment—Radiated disturbance | GB/T 18039.10-2018 | 2018-12-1 |
| Specification for radio disturbance and immunity measuring apparatus and methods—Part 4-1:Uncertainties,statistics and limit modelling—Uncertainties in standardized EMC tests | GB/Z 6113.401-2018 | 2018-10-1 |
| Specification for radio disturbance and immunity measuring apparatus and methods—Part 4-2:Uncertainties,statistics and limit modelling—Measurement instrumentation uncertainty | GB/T 6113.402-2018 | 2018-10-1 |
| Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment | GB/T 17743-2017 | 2018-7-1 |
| Limits of radio interference from high voltage AC overhead power transmission lines | GB/T 15707-2017 | 2018-7-1 |
| Electromagnetic compatibility—Testing and measurement techniques—Immunity to conducted disturbances,induced by radio-frequency fields | GB/T 17626.6-2017 | 2018-7-1 |
| Electromagnetic compatibility―Environment―Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems | GB/T 18039.3-2017 | 2018-7-1 |
| Electromagnetic compatibility―Environment―Compatibility levels in industrial plants for low-frequency conducted disturbances | GB/T 18039.4-2017 | 2018-7-1 |
| Electromagnetic compatibility(EMC)―Testing and measurement techniques―Radiated emissions and immunity measurements in fully anechoic rooms(FARs) | GB/T 17626.22-2017 | 2018-7-1 |
| Electromagnetic compatibility―Installation and mitigation guidelines―General considerations | GB/Z 30556.1-2017 | 2018-7-1 |
| Electromagnetic compatibility―Testing and measurement techniques―Damped oscillatory magnetic field immunity test | GB/T 17626.10-2017 | 2018-7-1 |
| Guidelines for electromagnetic compatibility requirements of equipments constituting and access to smart grid | GB/Z 35733-2017 | 2018-7-1 |
| Electromagnetic compatibility―Installation and mitigation guidelines―Earthing and cabling | GB/Z 30556.2-2017 | 2018-7-1 |
| Electric Vehicle Conductive Charging System Part 2: EMC Requirements for Off-board Electric Vehicle Supply Equipment | GB/T 18487.2-2017 | 2018-7-1 |
| Electromagnetic compatibility―Testing and measurement techniques―General guide on harmonics and interharmonics measurements and instrumentation,for power supply systems and equipment connected thereto | GB/T 17626.7-2017 | 2018-2-1 |
| Electromagnetic compatibility. Generic standards. Immunity for power station and substation environments | GB/Z 17799.6-2017 | 2018-2-1 |
| Specification for radio disturbance and immunity measuring apparatus and methods. Part 2-1: Methods of measurement of disturbances and immunity. Conducted disturbance measurements | GB/T 6113.201-2017 | 2018-2-1 |
| Methods of measurement of the suppression characteristics of passive EMC filtering devices | GB/T 7343-2017 | 2018-2-1 |
| Electromagnetic compatibility―Limits―Signalling on low-voltage electrical installations―Emission levels,frequency bands and electromagnetic disturbance levels | GB/T 17625.9-2016 | 2017-7-1 |
| Electromagnetic compatibility--Testing and measurement techniques--Damped oscillatory wave immunity test | GB/T 17626.18-2016 | 2017-7-1 |
| Specification for radio disturbance and immunity measuring apparatus and methods of measurement - Part 2-3: Methods of measurement of radio disturbance and immunity - Radiated disturbance measurements | GB/T 6113.203-2016 | 2016-11-1 |
| Specification for radio disturbance and immunity measuring apparatus and methods of measurement - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring equipment | GB/T 6113.101-2016 | 2016-11-1 |
| Radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Radiated disturbance measuring antenna and test site | GB/T 6113.104-2016 | 2016-11-1 |
| Electromagnetic compatibility―Guide to the drafting of electromagnetic compatibility standards | GB/Z 18509-2016 | 2016-9-1 |
| Electromagnetic compatibility―Limits―Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and ≤75 A per phase | GB/T 17625.8-2015 | 2016-4-1 |
| Electromagnetic compatibility requirement and measurement methods for telecommunication network equipment | GB/T 19286-2015 | 2016-3-9 |
| Information technology equipment―Immunity characteristics―Limits and methods of measurement | GB/T 17618-2015 | 2015-9-1 |
| Equipment for general lighting purposes―EMC immunity requirements | GB/T 18595-2014 | 2015-6-1 |
| Electromagnetic compatibility―Testing and measurement techniques―Emission and immunity testing in transverse electromagnetic(TEM) waveguide | GB/T 17626.20-2014 | 2015-6-1 |
| Electromagnetic shielding effectiveness specification and measuring method for high voltage testing enclosures | GB/T 30842-2014 | 2015-1-22 |
| Industrial, Scientific and Medical Equipment - Radio-frequency Disturbance Characteristics - Limits and Methods of Measurement | GB 4824-2013 | 2015-1-13 |
| Electromagnetic Compatibility - Installation and Mitigation Guidelines - Degrees of Protection Provided by Enclosures against Electromagnetic Disturbances (EM Code) | GB/T 30556.7-2014 | 2014-10-28 |
| Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement | GB 9254-2008/XG1-2013 | 2014-7-28 |
| Electromagnetic environment requirements for aeronautical radio navigation stations | GB 6364-2013 | 2014-7-1 |
| Specification for radio disturbance and immunity measuring apparatus and methods—Part 2-5:In situ measurements of disturbing emissions produced by physically large equipment | GB/Z 6113.205-2013 | 2014-5-14 |
| Electromagnetic compatibility―General―Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena | GB/Z 17624.2-2013 | 2014-4-9 |
| Electromagnetic compatibility―Testing and measurement techniques―Ring wave immunity test | GB/T 17626.12-2013 | 2014-4-9 |
| Electromagnetic compatibility―Environment―Compatibility levels for low-frequency conducted disturbances and signaling in public medium-voltage power supply systems | GB/T 18039.9-2013 | 2014-3-7 |
| Requirements and measurement methods of electromagnetic compatibility for 800 MHz/2 GHz cdma2000 digital cellular mobile telecommunications system— Part 1:User equipment and ancillary equipment | GB/T 19484.1-2013 | 2014-2-1 |
| Electromagnetic compatibility—Limits—Limitation of voltage changes,voltage fluctuations and flicker in public low-voltage supply systems for equipment with rated current≤75 A and subject to conditional connection | GB/T 17625.7-2013 | 2013-12-2 |
| Electromagnetic compatibility(EMC)—Generic standards—Emission standard for industrial environments | GB 17799.4-2012 | 2013-7-1 |
| Electromagnetic compatibility(EMC)—Generic standards—Emission standard for industrial environments | GB 17799.3-2012 | 2013-7-1 |
| Electromagnetic compatibility—Limits—Limits for harmonic current emissions(equipment input current ≤16 A per phase) | GB 17625.1-2012 | 2013-7-1 |
| Sound and television broadcast receivers and associated equipment—Radio disturbance characteristics—Limits and methods of measurement | GB 13837-2012 | 2013-7-1 |
| Electromagnetic environment requirements for short-wave radio receiving and direction finding stations | GB 13614-2012 | 2013-4-1 |
| Electromagnetic compatibility - Environment - Description of HEMP environment - Conducted disturbance | GB/T 18039.8-2012 | 2013-2-1 |
| Electromagnetic compatibility - Testing and measurement techniques - Power quality measurement methods | GB/T 17626.30-2012 | 2013-2-1 |
| Electromagnetic compatibility - Testing and measurement techniques - Test methods for protective devices for HEMP conducted disturbance | GB/T 17626.24-2012 | 2013-2-1 |
| Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices—Human models,instrumentation,and procedures—Part 1:Procedure to determine the specific absorption rate(SAR)for hand-held devices used in close proxim | GB/T 28446.1-2012 | 2012-10-1 |
| Electromagnetic compatibility(EMC)—Generic standards—HEMP immunity for indoor equipment | GB/T 17799.5-2012 | 2012-9-1 |
| Electromagnetic compatibility—Testing and measurement techniques—Voltage dips,short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase | GB/T 17626.34-2012 | 2012-9-1 |
| Electromagnetic compatibility—Testing and measurement techniques—Pulse magnetic field immunity test | GB/T 17626.9-2011 | 2012-8-1 |
| Electromagnetic compatibility—Testing and measurement techniques—Flickermeter—Functional and design specifications | GB/T 17626.15-2011 | 2012-8-1 |
| Electromagnetic compatibility—Environment—Voltage dips and short interruptions on public electric power supply systems with statistical measurement results | GB/Z 18039.7-2011 | 2012-6-1 |
| Vehicles, boats and internal combustion engine - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers | GB 14023-2011 | 2012-1-1 |
| Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-5: Uncertainties statistics and limit modelling - Conditions for the use of alternative tes | GB/Z 6113.405-2010 | 2011-6-1 |
| Vehicles boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers | GB/T 18655-2010 | 2011-6-1 |
| Electromagnetic environment protection requirements and measurement methods for VHF/UHF band radio monitoring station | GB/T 25003-2010 | 2010-12-1 |
| Electromagnetic compatibility - Requirements for household appliances electric tools and similar apparatus - Part 1: Emission | GB 4343.1-2009 | 2010-4-1 |
| Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment | GB 17743-2007 | 2009-11-1 |
| Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement | GB 9254-2008 | 2009-9-1 |
| Test method on electromagnetic emissions from electronic ballasts for single-and double-capped fluorescent lamps | GB/T 22148-2008 | 2009-7-1 |
| Common requirements of electromagnetic compatibility for radio communication equipment | GB/T 22451-2008 | 2009-4-1 |
| Limits and measurement methods of electromagnetic compatibility for 900/1800MHz TDMA digital cellular telecommunications system - Part 1: Mobile station and ancillary equipment | GB/T 22450.1-2008 | 2009-4-1 |
| Electromagnetic compatibility - Testing and measurement techniques - Surge immunity test | GB/T 17626.5-2008 | 2009-1-1 |
| Electromagnetic compatibility - Testing and measurement techniques - Immunity to conducted disturbances induced by radio-frequency fields | GB/T 17626.6-2008 | 2009-1-1 |
| Electromagnetic compatibility - Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation for power supply systems and equip | GB/T 17626.7-2008 | 2009-1-1 |
| Electromagnetic compatibility--Testing and measurement techniques--Voltage dips,short interruptions and voltage variations immunity tests | GB/T 17626.11-2008 | 2009-1-1 |
| Electromagnetic compatibility (EMC) - Part 8: Testing and measurement techniques - Power frequency magnetic field immunity test | GB/T 17626.8-2006 | 2009-1-1 |
| Electromagnetic compatibility - Testing and measurement techniques - Electrical fast transient/burst immunity test | GB/T 17626.4-2008 | 2009-1-1 |
| Electromagnetic environment parameters limit for ±800kV UHV DC transmission lines | DL/T 1088-2008 | 2008-11-1 |
| Standard of immunity for secondary equipment in ±800kV UHV DC converter stations | DL/T 1087-2008 | 2008-11-1 |
| The Limit Requirement and Test Method of the Acoustic Noise Emitted by the Telecommunication Equipment | YD/T 1816-2008 | 2008-11-1 |
| Measurement method for total electric field strength and ion current density of the converter station and DC transmission lines | DL/T 1089-2008 | 2008-10-1 |
| Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-4: Methods of measurement of disturbances and immunity - Immunity measurements | GB/T 6113.204-2008 | 2008-9-1 |
| Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-2: Methods of measurement of disturbances and immunity - Measurement of disturbance power | GB/T 6113.202-2008 | 2008-9-1 |
| Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements | GB/T 6113.203-2008 | 2008-9-1 |
| Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus | GB/T 6113.101-2008 | 2008-9-1 |
| Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-3: Radio disturbance and immunity measuring apparatus-Ancillary equipment - Disturbances po | GB/T 6113.103-2008 | 2008-9-1 |
| Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity measuring apparatus-Ancillary equipment - Radiated distur | GB/T 6113.104-2008 | 2008-9-1 |
| Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-5: Radio disturbance and immunity measuring apparatus - Antenna calibration test sites for | GB/T 6113.105-2008 | 2008-9-1 |
| Specification for radio disturbance and immunity measuring apparatus and methods Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements | GB/T 6113.201-2008 | 2008-9-1 |
| Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Conducted dis | GB/T 6113.102-2008 | 2008-9-1 |
| Specification for radio disturbance and immunity measuring apparatus and methods—Part 4-1:Uncertainties statistics and limit modelling—Uncertainties in standardized EMC tests | GB/Z 6113.401-2007 | 2008-4-1 |
| Specification for radio disturbance and immunity measuring apparatus and methods—Part 4-3:Uncertainties statistics and limit modelling—Statistical considerations in the determinatio | GB/Z 6113.403-2007 | 2008-4-1 |
| Specification for radio disturbance and immunity measuring apparatus and methods—Part 4-4:Uncertainties statistics and limit modelling—Statistics of complaints and a model for the c | GB/Z 6113.404-2007 | 2008-4-1 |
| Electromagnetic compatibility (EMC)—Limits—Limitation of voltage changes,voltage fluctuations and flicker in public low-voltage supply systems,for equipment with rated current ≤16 A pe | GB 17625.2-2007 | 2008-1-1 |
| Interior of Telecommunication Equipment-Measurement of Electromagnetic Emissions-150kHz to 1GHz Part 1:General Conditions and Definitions | YD/T 1690.1-2007 | 2008-1-1 |
| Interior of Telecommunication Equipment-Measurement of Electromagnetic Emissions-150kHz to 1GHz Part 6:Measurement of Conducted Emissions-Magnetic Probe Method | YD/T 1690.6-2007 | 2008-1-1 |
| Interior of Telecommunication Equipment-Measurement of Electromagnetic Emissions-150kHz to 1GHz Part 4:Measurement of Conducted Emissions-1Ω/150Ω Direct Coupling Method | YD/T 1690.4-2007 | 2008-1-1 |
| Interior of Telecommunication Equipment-Measurement of Electromagnetic Emissions-150kHz to 1GHz Part 5:Measurement of Conducted Emissions-Workbench Faraday Cage Method | YD/T 1690.5-2007 | 2008-1-1 |
| Interior of Telecommunication Equipment-Measurement of Electromagnetic Emissions-150kHz to 1GHz Part 3:Measurement of Radiated Emissions-Surface Scan Method | YD/T 1690.3-2007 | 2008-1-1 |
| Interior of Telecommunication Equipment-Measurement of Electromagnetic Emissions-150kHz to 1GHz Part 2:Measurement of Radiated Emissions TEM Cell and Wideband TEM Cell Method | YD/T 1690.2-2007 | 2008-1-1 |
| Electromagnetic compatibility - Testing and measurement techniques - Test for immunity to conducted common mode disturbances in the frequency range 0 Hz to 150 kHz | GB/T 17626.16-2007 | 2007-9-1 |
| Electromagnetic compatibility (EMC) - Testing and measurement techniques - Voltage dips short interruptions and voltage variations on d.c. input power port immunity tests | GB/T 17626.29-2006 | 2007-9-1 |
| Electromagnetic compatibility - Testing and measurement techniques - Radiated radio-frequency electromagnetic field immunity test | GB/T 17626.3-2006 | 2007-9-1 |
| Electromagnetic compatibility（EMC） - Testing and measurement techniques - Electrostatic discharge immunity test | GB/T 17626.2-2006 | 2007-9-1 |
| Electromagnetic compatibility (EMC) - Testing and measurement techniques - Unbalance immunity test | GB/T 17626.27-2006 | 2007-7-1 |
| Electromagnetic compatibility (EMC) - Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port low frequency immunity test | GB/T 17626.13-2006 | 2007-7-1 |
| Electromagnetic compatibility (EMC) - Testing and measurement techniques - Variation of power frequency immunity test | GB/T 17626.28-2006 | 2007-7-1 |
| Electromagnetic compatibility - Testing and measurement techniques - Overview of immunity tests | GB/T 17626.1-2006 | 2007-6-1 |
| Qualification and measurement methods of Electromagnetic Compatibility(EMC) for Mobile Communications Repeater | GB/T 20549-2006 | 2007-5-1 |
| Vehicles,boats,and internal combustion engine driven devices―Radio disturbance characteristics―Limits and methods of measurement | GB 14023-2006 | 2007-5-1 |
| EMC specification and test methods for land mobile communication equipment | GB/T 15540-2006 | 2007-5-1 |
| Specification for radio disturbance and immunity measuring apparatus and methods - Part3: CISPR technical report | GB/Z 6113.3-2006 | 2007-1-1 |
| Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty | GB/T 6113.402-2006 | 2006-11-1 |
| Method for measuring the shielding effectiveness of electromagnetic shielding enclosures | GB/T 12190-2006 | 2006-11-1 |
| Methods of judging degradation for interference to mobile radiocommunication in the presence of impulsive noise | GB/T 15152-2006 | 2006-11-1 |
| Technical requirement and measurement method of spurious emission of radio equipments | YD/T 1483-2006 | 2006-10-1 |
| Classification of electromagnetic environmental conditions for telecommunication equipments | YD/T 1482-2006 | 2006-10-1 |
| Methods of measurement of the suppression characteristics of passive interference-free pin signal filters | SJ 20943-2005 | 2006-6-1 |
| General requirements for built-in hop anti-jamming module of ultrashort waves | SJ 20944-2005 | 2006-6-1 |
| General specification of testing method for electrostatic protection in electronic production manufacturing and using system | SJ/T 10694-2006 | 2006-2-1 |
| Electromagetic Compatibility --Environment Low frequency magnetic fields in various environments | GB/Z 18039.6-2005 | 2005-12-1 |
| Electromagetic Compatibility - Testing and measurement techniques - Voltage fluctuation immunity test | GB/T 17626.14-2005 | 2005-12-1 |
| Electromagetic Compatibility - Testing and measurement techniques - Ripple on d.c. input power port immunity test | GB/T 17626.17-2005 | 2005-12-1 |
| Industrial，scientific and medical(ISM)radio-frequency equipment--Electromagnetic disturbance characteristics--Limits and methods of measurement | GB 4824-2004 | 2005-2-1 |
| Industrial,scientific and medical equipment(ISM) - Guidelines for emission levels within the bands designated by the ITU | GB/Z 19511-2004 | 2005-2-1 |
| Requirements and measurement methods of electromagnetic compatibility for cordless telephone | GB 19483-2004 | 2004-10-1 |
| Electromagnetic Compatibility Requirement and measurement methods for Telecommunication Network Equipment | GB 19286-2003 | 2004-5-1 |
| The General Immunity requirements for telecommunication equipment | GB/T 19287-2003 | 2004-5-1 |
| Low and High Frequency EMC Mitigation Techniques for Telecommunication and Systems | YDC 029-2003 | 2004-4-6 |
| Electromagnetic compatibility--Environment--Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems | GB/T 18039.3-2003 | 2003-8-1 |
| Electromagnetic compatibility--Limits--Limitation of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater than 16A | GB/Z 17625.6-2003 | 2003-8-1 |
| Electromagnetic compatibility--Environment--Electromagnetic environment for low-frequency conducted distrubances and signalling in public power supply systems | GB/Z 18039.5-2003 | 2003-8-1 |
| Electromagnetic compatibility--Environment--Compatibility levels in industrial plants for low-frequency conducted disturbances | GB/T 18039.4-2003 | 2003-8-1 |
| Electromagnetic compatibility--Generic standars--Immunity for industrial environments | GB/T 17799.2-2003 | 2003-8-1 |
| Electromagnetic compatibility—Limits—Limits for harmonic current emissions(equipment input current≤16A per phase) | GB 17625.1-2003 | 2003-5-1 |
| Electrotechnical terminology--Electromagnetic compatibility | GB/T 4365-2003 | 2003-5-1 |
| Limits and methods of measurement of radio disturbance characteristics for the protection of receivers used on board wehicles | GB 18655-2002 | 2003-3-1 |
| Electromagnetic compatibility - Generic Standards - Emission Standard for industrial environments | GB 17799.4-2001 | 2003-1-2 |
| Determination of limits for industrial,scientific and medical equipment (CISPR 23:1987,IDT) | GB/Z 18732-2002 | 2003-1-1 |
| Requirement and measurement methods of electromagnetic compatibility for xDSL equipment | YD/T 1244-2002 | 2002-12-10 |
| Industrial,scientific and medical(ISM) radio-frequency equipment--Electromagnetic disturbance characteristics--Limits and methods of measurement | GB 4824-2001 | 2002-11-5 |
| Requirements and methods of measurement of electromagnetic compatibility for telecommunication terminal equipment | YD/T 968-2002 | 2002-10-29 |
| of measurement of radio interference from high voltage overhead power transmission line and substation | GB/T 7349-2002 | 2002-8-1 |
| Equipment for general lighting purposes - EMC immunity requirements | GB/T 18595-2001 | 2002-8-1 |
| Protecting distance of radio radiation interference from AC electrified railway to television relay broadcasting and transposer station(s) | GY/T 181-2002 | 2002-5-1 |
| General specification for military electromagnetic shielding foil | SJ 20814-2002 | 2002-5-1 |
| Electromagnetic compatibility-Guide to the drafting of electromagnetic compatibility standards | GB/Z 18509-2001 | 2002-5-1 |
| Electromagnetic compatibility - Limits - Assessment of emission limits for fluctuating loads in MV and HV power systems | GB/Z 17625.5-2000 | 2000-12-1 |
| Electromagnetic compatibility--Limits--Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 16A | GB/Z 17625.3-2000 | 2000-12-1 |
| Electromagnetic compatibility--Environment--Classification of electromagnetic environments | GB/Z 18039.1-2000 | 2000-12-1 |
| Electromagnetic compatibility--Environment--Assessment of the emission levels in the power supply of industrial plants as regards low-frequency conducted disturbances | GB/Z 18039.2-2000 | 2000-12-1 |
| Electromagnetic compatibility-Limits-Assessment of emission limits for distorting loads in MV and HV power systems | GB/Z 17625.4-2000 | 2000-12-1 |
| Electromagnetic compatibility Testing and measurement techniques Voltage dips,short interruptions and voltage variations immunity tests | GB/T 17626.11-1999 | 2000-6-1 |
| Electromagnetic compatibility limits Limitation of voltage fluctuations and flicker in low-voltage supply systems for equipment with rated current≤16A | GB 17625.2-1999 | 2000-6-1 |
| Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment | GB 17743-1999 | 2000-5-1 |
| Electromagnetic compatibility - Generic Standards - Immunity for residential, commercial and light-industrial environments | GB/T 17799.1-1999 | 2000-3-1 |
| Electromagnetic compatibility--Testing and measurement techniques--Surge immunity test | GB/T 17626.5-1999 | 2000-3-1 |
| Vehicles，motorboats and spark-ignited engine-driven devices--Radio disturbance characteristics--Limits and methods of measurement | GB 14023-2000 | 2000-1-2 |
| Electromagnetic compatibility - Testing and measurement techniques - Damped oscillatory magnetic field immunity test | GB/T 17626.10-1998 | 1999-12-1 |
| Electromagnetic compatibility-- Testing and measurement techniques --Electrical fast transient/burst immunity test | GB/T 17626.4-1998 | 1999-12-1 |
| The limits for the harmonic current emissions caused by low-voltage electrical and electronic equipments (equipment input current≤16A per phase) | GB 17625.1-1998 | 1999-12-1 |
| Electromagnetic compatibility - Testing and measurement techniques - Oscillatory waves immunity test | GB/T 17626.12-1998 | 1999-12-1 |
| Information technology equipment--Radio disturbance characteristics--Limits and methods of measurement | GB 9254-1998 | 1999-1-2 |
| Electromagnetic compatibility--Testing and measurement techniques--Electrostatic discharge immunity test | GB/T 17626.2-1998 | 1999-1-2 |
| Methods of measurement of radio disturbance and immunity | GB/T 6113.2-1998 | 1999-1-2 |
| Electromagnetic compatibility --Testing and measurement techniques --Overview of immunity tests | GB/T 17626.1-1998 | 1999-1-2 |
| Electromagnetic compatibility--Testing and measurement techniques-- Radiated,radio-frequency,electromagnetic field immunity test | GB/T 17626.3-1998 | 1999-1-2 |
| Limits and methods of testing for immunity of electrical / electronic sub-assemblies in vehicles to electromagnetic radiation | GB/T 17619-1998 | 1999-1-2 |
| Electromagnetic compatibility--Testing and measurement techniques--Power frequency magnetic field immunity test | GB/T 17626.8-1998 | 1999-1-2 |
| Electromagnetic compatibility --Testing and measurement techniques --General guide on harmonics and interharmonics measurements and instrumentation ，for power supply systems and equipment connected thereto | GB/T 17626.7-1998 | 1999-1-2 |
| Information technology equipment - Immunity characteristics - Limits and methods of measurement | GB/T 17618-1998 | 1999-1-2 |
| Electromagnetic compatibility--Testing and measurement techniques--Pulse magnetic field immunity test | GB/T 17626.9-1998 | 1999-1-2 |
| Electromagnetic compatibility --Testing and measurement techniques --Immunity to conducted disturbances,induced by radio-frequency fields | GB/T 17626.6-1998 | 1999-1-2 |
| Methods of measurement of radiated interference from microwave ovens for frequencies above 1GHz | GB/T 16607-1996 | 1997-10-1 |
| Terminology for electromagnetic compatibility | GB/T 4365-1995 | 1996-3-1 |
| EMC specification and test methods for land mobile communication equipment | GB 15540-1995 | 1995-12-1 |
| Methods of judging degradation for interference to mobile rodiocommunication in the presence of impulsive noise | GB/T 15152-1994 | 1995-2-1 |
| Protecting Distance of Radio Interference of AC Electric Railway to AM Broadcasting Radio Stations | TB/T 2464-1993 | 1994-7-1 |
| Electromagnetic compatibility for industrial-process measurement and control equipment -Electrical fast transient burst requirements | GB/T 13926.4-1992 | 1993-6-4 |
| Electromagnetic compatibility for industrial-process electromagnetic field requirements | GB/T 13926.3-1992 | 1993-6-4 |
| Electromagnetic compatibility for induatrial-process measurement and control equipment -Electrostatic discharge requirements | GB/T 13926.2-1992 | 1993-6-4 |
| Calculation Method for Noise Disturbance of A.C Electrified Railway Effects Telecommunication lines | CECS 67-1994 | 1993-3-1 |
| Test Method for the Susceptibility of Electromagnetic Measurement By Radiation Transverse Electromagnetic Cell | QJ 2350-1992 | 1992-10-3 |
| Measurement of shielding effectiveness of high-performance shielding enclosures | GB/T 12190-1990 | 1990-8-1 |
| Methods of measurement of radio interference from high voltage overhead power transmission lines and substations | GB/T 7349-1987 | 1987-11-1 |
| protecting distance between overhead power line and receiving station of AM broadcasting | GB 7495-1987 | 1987-11-1 |
