General technical conditions of the system for the management of the underground personnel in a coal mine
1 Scope
This standard specifies the terms and definitions, product classification, technical requirements, test methods and inspection rules of management system for the underground personnel in a coal mine.
This standard is applicable to the management system for the underground personnel in a coal mine (hereinafter referred to as “the system”) and its products used for coal mines.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections) to, or revisions of, any of these publications do not apply to this standard. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition applies.
GB/T 2887 General specification for computer field
GB 3836.1 Explosive atmospheres - Part 1: Equipment - General requirements (eqv IEC 60079-0)
GB 3836.2 Explosive atmospheres - Part 2: Equipment protection by flameproof enclosures “d” (eqv IEC 60079-1)
GB 3836.3 Explosive atmospheres - Part 3: Equipment protection by increased safety “e” (eqv IEC 60079-7)
GB 3836.4 Explosive atmospheres - Part 4: Equipment protection by intrinsic safety “i” (eqv IEC 60079-4)
GB/T 10111 Generation of random numbers and procedures applied to sampling inspection for product quality
AQ 6201 General technical requirements of coal mine safety supervision
MT 209 General technical requirements of electric and electronic products used for communication, detection and control in coal mine
MT/T 286 Compilation methods and management measures for models of communication and automation products for coal mine
MT/T 772-1998 Measuring methods for the primary performances of coal mine supervision systems
MT/T 899 Information transmission device for coal mine
MT/T 1004 General technical conditions of coal mine productive safety supervision system
MT/T 1005 Substation for coal mine
MT/T 1007 Information transmission interface for coal mine
MT/T 1008 General technical requirements of software for productive safety supervision system in coal mine
3 Terms and definitions
For the purposes of this standard, the following terms and definitions apply:
3.1
management system for the underground personnel in a coal mine
system which is used for monitoring the position of underground personnel and has the functions of monitoring, displaying, printing, storing, inquiring, alarming, managing the exit/entry time of card-carrying personnel, the exit/entry time of key areas, the exit/entry time of forbidden areas, working time, the number of personnel underground and in key areas, and the activity route of underground personnel
3.2
identification card
card storing electronic data in the agreed format which is carried by the personnel going underground and used for sending data for personnel identification to the substation when the personnel enter the identification scope of the location monitoring substation
3.3
location monitoring substation
substation that reads information used for personnel identification in the identification card through wireless mode and transmits the information to the ground transmission interface
3.4
transmission interface
interface that receives the signal from substation and sends it to the host for processing; receives the host signal and sends it to the corresponding substation; controls the sending and receiving of substation, the modulation and demodulation of multiplexed signals, and has the functions of system self-inspection
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Product classification
5 Technical requirements
6 Test method
7 Inspection rules
Annex A (Normative) Characteristic requirements of test instruments and equipment
AQ 6210-2007 General technical conditions of the system for the management of the underground personnel in a coal mine (English Version)
Standard No.
AQ 6210-2007
Status
valid
Language
English
File Format
PDF
Word Count
7000 words
Price(USD)
210.0
Implemented on
2007-7-1
Delivery
via email in 1 business day
Detail of AQ 6210-2007
Standard No.
AQ 6210-2007
English Name
General technical conditions of the system for the management of the underground personnel in a coal mine
Chinese Name
煤矿井下作业人员管理系统通用技术条件
Chinese Classification
D09
Professional Classification
AQ
ICS Classification
Issued by
0
Issued on
2007-3-30
Implemented on
2007-7-1
Status
valid
Superseded by
Superseded on
Abolished on
Superseding
Language
English
File Format
PDF
Word Count
7000 words
Price(USD)
210.0
Keywords
AQ 6210-2007, AQ/T 6210-2007, AQT 6210-2007, AQ6210-2007, AQ 6210, AQ6210, AQ/T6210-2007, AQ/T 6210, AQ/T6210, AQT6210-2007, AQT 6210, AQT6210
Introduction of AQ 6210-2007
General technical conditions of the system for the management of the underground personnel in a coal mine
1 Scope
This standard specifies the terms and definitions, product classification, technical requirements, test methods and inspection rules of management system for the underground personnel in a coal mine.
This standard is applicable to the management system for the underground personnel in a coal mine (hereinafter referred to as “the system”) and its products used for coal mines.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections) to, or revisions of, any of these publications do not apply to this standard. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition applies.
GB/T 2887 General specification for computer field
GB 3836.1 Explosive atmospheres - Part 1: Equipment - General requirements (eqv IEC 60079-0)
GB 3836.2 Explosive atmospheres - Part 2: Equipment protection by flameproof enclosures “d” (eqv IEC 60079-1)
GB 3836.3 Explosive atmospheres - Part 3: Equipment protection by increased safety “e” (eqv IEC 60079-7)
GB 3836.4 Explosive atmospheres - Part 4: Equipment protection by intrinsic safety “i” (eqv IEC 60079-4)
GB/T 10111 Generation of random numbers and procedures applied to sampling inspection for product quality
AQ 6201 General technical requirements of coal mine safety supervision
MT 209 General technical requirements of electric and electronic products used for communication, detection and control in coal mine
MT/T 286 Compilation methods and management measures for models of communication and automation products for coal mine
MT/T 772-1998 Measuring methods for the primary performances of coal mine supervision systems
MT/T 899 Information transmission device for coal mine
MT/T 1004 General technical conditions of coal mine productive safety supervision system
MT/T 1005 Substation for coal mine
MT/T 1007 Information transmission interface for coal mine
MT/T 1008 General technical requirements of software for productive safety supervision system in coal mine
3 Terms and definitions
For the purposes of this standard, the following terms and definitions apply:
3.1
management system for the underground personnel in a coal mine
system which is used for monitoring the position of underground personnel and has the functions of monitoring, displaying, printing, storing, inquiring, alarming, managing the exit/entry time of card-carrying personnel, the exit/entry time of key areas, the exit/entry time of forbidden areas, working time, the number of personnel underground and in key areas, and the activity route of underground personnel
3.2
identification card
card storing electronic data in the agreed format which is carried by the personnel going underground and used for sending data for personnel identification to the substation when the personnel enter the identification scope of the location monitoring substation
3.3
location monitoring substation
substation that reads information used for personnel identification in the identification card through wireless mode and transmits the information to the ground transmission interface
3.4
transmission interface
interface that receives the signal from substation and sends it to the host for processing; receives the host signal and sends it to the corresponding substation; controls the sending and receiving of substation, the modulation and demodulation of multiplexed signals, and has the functions of system self-inspection
Contents of AQ 6210-2007
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Product classification
5 Technical requirements
6 Test method
7 Inspection rules
Annex A (Normative) Characteristic requirements of test instruments and equipment