Detail of GB 24539-2009

Introduction of GB 24539-2009

Protective clothing—Performance requirements of chemical protective clothing 1 Scope This standard specifies classification by type and class, and labeling, and establishes the basic technical requirements and test methods for chemical protective clothing. This standard applies to chemical protective clothing required by operating personnel in workplaces and emergency rescue work. This standard is not applicable to chemical protective clothing used in fire fighting and other applications. This standard does not address performance requirements for personal protective equipment such as gloves, protective boots/shoes, face masks, sight windows, eye protection and respiratory devices, unless they are an integral part of the protective clothing and provide corresponding chemical protective performance. Note: The protection objects covered by this standard include gaseous, liquid and solid chemicals. For the purposes of this standard, chemical protective clothing is classified based on the application and protection object, and basic requirements and test methods for the performance of protective clothing at various levels are specified. 2 Normative references The following documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding any corrigendum), or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. For undated references, the latest edition of the document referred to applies. GB 2626-2006 Respiratory protective equipment—Non-powered air-purifying particle respirator GB/T 3820 Determination of thickness of textiles and textile products (GB/T 3820-1997, eqv ISO 5084:1996) GB/T 3917.3 Textiles—Tear properties of fabrics—Part 3: Determination of tear force of trapezoid-shaped test specimens (GB/T 3917.3-1997, eqv ISO 9073-4:1989) GB/T 3923.1 Textiles—Tensile properties of fabrics—Part 1: Determination of maximum force and elongation at maximum force using the strip method (GB/T 3923.1-1997, neq ISO/DIS 13934-1:1994) GB/T 4669 Textiles—Woven fabrics—Determination of mass per unit length and mass per unit area (GB/T 4669-2008, ISO 3801:1977, MOD) GB/T 4744 Textiles—Testing and evaluation for water resistance—Hydrostatic pressure method (GB/T 4744-1997, eqv ISO 811:1981) GB/T 12586 Rubber- or plastics-coated fabrics—Determination of resistance to damage by flexing (ISO 7854:1995, IDT) GB/T 13773.1 Textiles—Seam tensile properties of fabrics and made-up textile articles—Part 1: Determination of maximum force to seam rupture using the strip method (GB/T 13773.1-2008, ISO 13935-1:1999, IDT) GB/T 20655 Protective clothing—Mechanical properties—Determination of the resistance to puncture (GB/T 20655-2006, ISO 13996:1999, IDT) GB/T 21196.2 Textiles—Determination of the abrasion resistance of fabrics by the Martindale method—Part 2: Determination of specimen breakdown (GB/T 21196.2-2007, ISO 12947-2:1998, MOD) GB/T 21294-2007 Testing method of the garments intrinsic quality GB/T 23462 Protective clothing—Test method for chemical protective materials to permeation by chemicals 3 Terms and definitions For the purposes of this standard, the following terms and definitions apply. 3.1 chemical protective clothing clothing worn to protect the body against chemicals Note: These garments may cover the whole, or greater part of the body, i.e. trunk, arms and legs. A chemical protective suit can consist of garments combined together to provide protection to the body. A suit can also have various types of additional protection. 3.2 fully encapsulated clothing clothing that can completely cover the wearer and respiratory equipment and can provide airtight and/or liquid-tight protection 3.3 non-encapsulated clothing clothing that protects greater part of the body, including at least trunk, arms and legs It is unnecessary to cover the respiratory equipment used by the wearer. It includes one-piece coveralls or two-piece suits. 3.4 limited use protective clothing protective clothing that has low requirements imposed on the strength and abrasion resistance of clothing materials and can be used only once or for a limited number of times until it is contaminated 3.5 reusable protective clothing protective clothing that has high requirements imposed on the strength and abrasion resistance of clothing materials, and once used, can still provide effective protection after necessary decontamination treatment and qualification 3.6 emergency response team ET type of chemical protective clothing required by operating personnel in emergency rescue work 3.7 gas-tight protective ensembles for emergency response team type of one-piece chemical protective clothing with hoods, sight windows and hand and foot protection required by operating personnel in emergency rescue work, which provides the wearer with protection against gaseous, liquid and solid toxic and harmful chemicals Note 1: Gas-tight protective ensembles for emergency response team shall be equipped with self-contained breathing apparatus or long-tube breathing apparatus. Note 2: Gas-tight protective ensembles for emergency response team shall meet the requirements of air tightness test. 3.8 non-gas-tight protective ensembles for emergency response team type of one-piece chemical protective clothing with hoods, sight windows and hand and foot protection required by operating personnel in emergency rescue work, which provides the wearer with protection against liquid and solid toxic and harmful chemicals Note: Non-gas-tight protective ensembles for emergency response team shall be equipped with self-contained breathing apparatus or long-tube breathing apparatus. 3.9 liquid tight protective clothing clothing providing protection against liquid chemicals

Contents of GB 24539-2009

Foreword i Introduction iii 1 Scope 2 Normative references 3 Terms and definitions 4 Classification and codification 5 Technical requirements 6 Test methods 7 Labeling Annex A (Normative) Test method for airtightness of gas-tight protective clothing Annex B (Normative) Test method for liquid penetration resistance of chemical protective clothing Annex C (Normative) Test method for liquid-tight performance of chemical protective clothing Annex D (Normative) Test method for resistance to penetration by chemical protective clothing material under pressure Annex E (Normative) Test method for liquid repellency of chemical protective clothing material Annex F (Normative) Requirements for abrasive paper used in the abrasion resistance test of chemical protective clothing material Annex G (Normative) Test method for high and low temperature resistance of chemical protective clothing material Bibliography