GB/T 1503-2024 Cast steel rolls
1 Scope
This document specifies the technical requirements, test methods, inspection rules, markings, packaging and quality certificate of cast steel rolls.
This document is applicable to cast steel rolls used for metal material processing and composite rolls (including roll rings) with cast steel working layers.
2 Normative references
The following documents contain requirements which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 145 Center holes
GB/T 222 Permissible tolerances for chemical composition of steel products
GB/T 223.11 Iron, steel and alloy - Determination of chromium content - Visual titration or potentiometric titration method
GB/T 223.13 Methods for chemical analysis of iron, steel and alloy - The ammonium ferrous sulfate titration method for the determination of vanadium content
GB/T 223.23 Iron, steel and alloy - Determination of nickel content - The dimethylglyoxime spectrophotometric method
GB/T 223.25 Methods for chemical analysis of iron, steel and alloy - The dimethylglyoxime gravimetric method for the determination of nickel content
GB/T 223.26 Iron steel and alloy - Determination of molybdenum content - The thiocyanate spectrophotometric method
GB/T 223.28 Methods for chemical analysis of iron steel and alloy - The α-benzoinoxime gravimetric method for the determination of molybdenum content
GB/T 223.38 Methods for chemical analysis of iron, steel and alloy - The anion-exchange separation-gravimetric method for the determination of niobium content
GB/T 223.40 Iron, steel and alloy - Determination of niobium content by the sulphochlorophenol S spectrophotometric method
GB/T 223.43 Iron steel and alloy - Determination of tungsten content - Gravimetric method and spectrophotometric method
GB/T 223.59 Iron, steel and alloy - Determination of phosphorus content - Bismuth phosphomolybdate blue spectrophotometric method and antimony phosphomolybdate blue spectrophotometric method
GB/T 223.60 Methods for chemical analysis of iron, steel and alloy - The perchloric acid dehydration gravimetric method for the determination of silicon content
GB/T 223.62 Methods for chemical analysis of iron, steel and alloy - The butyl acetate extraction photometric method for the determination of phosphorus content
GB/T 223.63 Iron, steel and alloy - Determination of manganese content - Sodium (potassium) periodate spectrophotometric method
GB/T 223.64 Iron, steel and alloy - Determination of manganese content - Flame atomic absorption spectrometric method
GB/T 223.66 Methods for chemical analysis of iron, steel and alloy - The thiocyanate-chlorpromazine hydrochloride-chloroform extraction photometric method for the determination of tungsten content
GB/T 223.67 Iron, steel and alloy - Determination of sulfur content - Methylene blue spectrophotometric method
GB/T 223.71 Methods for chemical analysis of iron, steel and alloy - The gravimetric method after combustion in the pipe furnace for the determination of carbon content
GB/T 223.76 Methods for chemical analysis of iron, steel and alloy - The flame atomic absorption spectrometric method for the determination of vanadium content
GB/T 223.79 Iron and steel - Determination of multi-element contents - X-ray fluorescence spectrometry (routine method)
GB/T 228.1 Metallic materials - Tensile testing - Part 1: Method of test at room temperature
GB/T 1804 General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
GB/T 9445 Non-destructive testing - Qualification and certification of personnel
GB/T 12604.1 Non-destructive testing - Terminology - Ultrasonic testing
GB/T 13313 Methods of shore and leeb hardness testing for rolls
GB/T 14203 General rules for spark discharge atomic emission spectrometry
GB/T 15546 Terms of mill rolls
JB/T 10061 Commonly used specification for A-mode ultrasonic flaw detector using pulse echo technique
JB/T 10062 Testing methods for performance of probes used in ultrasonic flaw detection
3 Terms, definitions and symbols
3.1 Terms and definitions
For the purposes of this document, the terms and definitions given in GB/T 12604.1, GB/T 15546 and the following apply.
3.1.1
outer layer thickness
thickness of the same material of the working layer of a composite roll
3.2 Symbols
For the purposes of this document, the following symbols apply.
B——bottom echo or bottom echo height
F——defect echo or defect echo height
H——distance from the defect echo to the detection surface
S——indicated area of a defect measured with a specified sensitivity echo height as a boundary
f.s——scale of full screen height of the instrument
4 Technical requirements
4.1 General requirements
4.1.1 Rolls shall be manufactured in accordance with this document according to the use of the rolls and the order drawing confirmed by the supplier and purchaser.
4.1.2 Technical requirements other than those in this document shall be determined by the supplier and the purchaser through negotiation.
4.2 Chemical composition and surface hardness
4.2.1 The chemical composition and surface hardness shall meet the requirements of Table 1.
4.2.2 The core of cast steel composite roll (ring) may be made of spheroidal graphite cast iron, graphite steel, low-alloy steel or forged steel.
4.2.3 The chemical composition of the core is designed by the manufacturer according to the performance requirements.
Contents
1 Scope
2 Normative references
3 Terms, definitions and symbols
4 Technical requirements
5 Test methods
6 Inspection rules
7 Marking, packaging and quality certificate
Annex A (Normative) Ultrasonic testing method for cast steel rolls
GB/T 1503-2024 Cast steel rolls
1 Scope
This document specifies the technical requirements, test methods, inspection rules, markings, packaging and quality certificate of cast steel rolls.
This document is applicable to cast steel rolls used for metal material processing and composite rolls (including roll rings) with cast steel working layers.
2 Normative references
The following documents contain requirements which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 145 Center holes
GB/T 222 Permissible tolerances for chemical composition of steel products
GB/T 223.11 Iron, steel and alloy - Determination of chromium content - Visual titration or potentiometric titration method
GB/T 223.13 Methods for chemical analysis of iron, steel and alloy - The ammonium ferrous sulfate titration method for the determination of vanadium content
GB/T 223.23 Iron, steel and alloy - Determination of nickel content - The dimethylglyoxime spectrophotometric method
GB/T 223.25 Methods for chemical analysis of iron, steel and alloy - The dimethylglyoxime gravimetric method for the determination of nickel content
GB/T 223.26 Iron steel and alloy - Determination of molybdenum content - The thiocyanate spectrophotometric method
GB/T 223.28 Methods for chemical analysis of iron steel and alloy - The α-benzoinoxime gravimetric method for the determination of molybdenum content
GB/T 223.38 Methods for chemical analysis of iron, steel and alloy - The anion-exchange separation-gravimetric method for the determination of niobium content
GB/T 223.40 Iron, steel and alloy - Determination of niobium content by the sulphochlorophenol S spectrophotometric method
GB/T 223.43 Iron steel and alloy - Determination of tungsten content - Gravimetric method and spectrophotometric method
GB/T 223.59 Iron, steel and alloy - Determination of phosphorus content - Bismuth phosphomolybdate blue spectrophotometric method and antimony phosphomolybdate blue spectrophotometric method
GB/T 223.60 Methods for chemical analysis of iron, steel and alloy - The perchloric acid dehydration gravimetric method for the determination of silicon content
GB/T 223.62 Methods for chemical analysis of iron, steel and alloy - The butyl acetate extraction photometric method for the determination of phosphorus content
GB/T 223.63 Iron, steel and alloy - Determination of manganese content - Sodium (potassium) periodate spectrophotometric method
GB/T 223.64 Iron, steel and alloy - Determination of manganese content - Flame atomic absorption spectrometric method
GB/T 223.66 Methods for chemical analysis of iron, steel and alloy - The thiocyanate-chlorpromazine hydrochloride-chloroform extraction photometric method for the determination of tungsten content
GB/T 223.67 Iron, steel and alloy - Determination of sulfur content - Methylene blue spectrophotometric method
GB/T 223.71 Methods for chemical analysis of iron, steel and alloy - The gravimetric method after combustion in the pipe furnace for the determination of carbon content
GB/T 223.76 Methods for chemical analysis of iron, steel and alloy - The flame atomic absorption spectrometric method for the determination of vanadium content
GB/T 223.79 Iron and steel - Determination of multi-element contents - X-ray fluorescence spectrometry (routine method)
GB/T 228.1 Metallic materials - Tensile testing - Part 1: Method of test at room temperature
GB/T 1804 General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
GB/T 9445 Non-destructive testing - Qualification and certification of personnel
GB/T 12604.1 Non-destructive testing - Terminology - Ultrasonic testing
GB/T 13313 Methods of shore and leeb hardness testing for rolls
GB/T 14203 General rules for spark discharge atomic emission spectrometry
GB/T 15546 Terms of mill rolls
JB/T 10061 Commonly used specification for A-mode ultrasonic flaw detector using pulse echo technique
JB/T 10062 Testing methods for performance of probes used in ultrasonic flaw detection
3 Terms, definitions and symbols
3.1 Terms and definitions
For the purposes of this document, the terms and definitions given in GB/T 12604.1, GB/T 15546 and the following apply.
3.1.1
outer layer thickness
thickness of the same material of the working layer of a composite roll
3.2 Symbols
For the purposes of this document, the following symbols apply.
B——bottom echo or bottom echo height
F——defect echo or defect echo height
H——distance from the defect echo to the detection surface
S——indicated area of a defect measured with a specified sensitivity echo height as a boundary
f.s——scale of full screen height of the instrument
4 Technical requirements
4.1 General requirements
4.1.1 Rolls shall be manufactured in accordance with this document according to the use of the rolls and the order drawing confirmed by the supplier and purchaser.
4.1.2 Technical requirements other than those in this document shall be determined by the supplier and the purchaser through negotiation.
4.2 Chemical composition and surface hardness
4.2.1 The chemical composition and surface hardness shall meet the requirements of Table 1.
4.2.2 The core of cast steel composite roll (ring) may be made of spheroidal graphite cast iron, graphite steel, low-alloy steel or forged steel.
4.2.3 The chemical composition of the core is designed by the manufacturer according to the performance requirements.
Contents of GB/T 1503-2024
Contents
1 Scope
2 Normative references
3 Terms, definitions and symbols
4 Technical requirements
5 Test methods
6 Inspection rules
7 Marking, packaging and quality certificate
Annex A (Normative) Ultrasonic testing method for cast steel rolls
