1 Scope
This standard specifies the classification and designation, requirements and test methods, inspection rules, packaging, marking, transportation, storage and safety for petroleum fuels for use in marine diesel engines and boilers (prior to appropriate treatment before use).
The specifications for fuels in this standard can also be applicable to fuels for stationary diesel engines of the same or similar make and type as those used for marine purposes.
This standard specifies four categories of distillate fuel, one of which is for diesel engines for emergency purposes. It also specifies six categories of residual fuel.
Note 1: For the purpose of this standard, the term “petroleum” is used to include oil from tar sands and from shale.
Note 2: Technical requirements for gas turbine fuels used in marine applications are specified in GB/T 29114-2012[1].
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB 190 Packing symbol of dangerous goods
GB/T 260 Determination of water content in petroleum products
GB/T 261 Determination of flash point — Pensky-Martens closed cup method(GB/T 261-2008, ISO 2719:2002, MOD)
GB/T 265 Petroleum products — Determination of kinematic viscosity and calculation of dynamic viscosity
GB/T 387 Dark petroleum products — Determination of sulphur content-Tubular oven method
GB/T 508 Petroleum products — Determination of ash (GB/T 508-1985, eqv ISO 6245:1982)
GB/T 1884 Crude petroleum and liquid petroleum products — Laboratory determination of density — Hydrometer method (GB/T 1884-2000, eqv ISO 3675:1998)
GB/T 1885 Petroleum measurement tables(GB/T 1885-1998, eqv ISO 91-2:1991)
GB/T 3535 Petroleum products — Determination of pour point (GB/T 3535-2006, ISO 3016-1994, MOD)
GB/T 4756 Petroleum liquids — Manual sampling (GB/T 4756-1998, eqv ISO 3170:1988)
GB/T 6986 Petroleum oils — Determination of cloud point (GB/T 6986-1986, eqv ISO 3015:1974)
GB/T 7304 Petroleum products and lubricants — Determination of neutralization number; Potentiometric titration method
GB/T 11137 Black petroleum products — Determination of kinematic viscosity(reverse-flow method) and calculation of dynamic viscosity
GB/T 11140 Standard test method for sulfur in petroleum products by wavelength dispersive X-ray fluorescence spectrometry
GB/T 12575 Liquid fuel oils — Determination of vanadium content-Flameless atomic absorption spectroscopic method
GB 13690 General rule for classification and hazard communication of chemicals
GB/T 17040 Standard test method for sulfur in petroleum and petroleum products by energy dispersive X-ray fluorescence spectrometry
GB/T 17144 Petroleum products — Determination of carbon residue — Micro method (GB/T 17144-1998, eqv ISO 10370:1993)
GB 20581 Safety rules for classification, precautionary labelling and precautionary statements of chemicals — Flammable liquids
GB/T 23801 Determination of fatty acid methyl esters(FAME) in middle distillates by infrared spectroscopy method
GB/T 20828 Biodiesel blend stock (BD100) for diesel engine fuels
SH 0164 Petroleum products — Rules for packaging, storage, transportation, delivery and acceptance
SH/T 0172 Determination of sulfur in petroleum products (high-temperature method)
SH/T 0175 Standard test method for oxidation stability of distillate fuel oil (accelerated method)
SH/T 0604 Crude petroleum and petroleum products — Determination of density-Oscillating U-tube method (SH/T 0604-2000, eqv ISO 12185:1996)
SH/T 0694 Calculation of cetane index of middle-distillate fuels by the four-variable equation (SH/T 0694-2000, eqv ISO 4264:1995)
SH/T 0701 Determination of total sediment in residual fuel oils by hot filtration (SH/T 0701-2001, eqv ISO 10307-1:1993)
SH/T 0702 Determination of total sediment in residual fuel oils (standard procedures for ageing) (SH/T 0702-2001, eqv ISO 10307-2:1993)
SH/T 0706 Petroleum products — Determination of aluminium and silicon in fuel oils-Inductively coupled plasma emission and atomic absorption spectroscopy methods (SH/T 0706-2001, eqv ISO 10478:1994)
SH/T 0715 Standard test methods for determination of nickel vanadium and iron in crude oils and residual fuels by inductively coupled plasma (ICP) atomic emission spectrometry
SH/T 0765 Diesel fuel — Assessment of lubricity using the high-frequency reciprocating rig (HFRR) (SH/T 0765-2005, ISO 12156-1:1997MOD)
ISO 8216-1:2010 Petroleum products-Fuels (class F) classification — Part 1: Categories of marine fuels
ISO 4259:2006 Petroleum products — Determination and application of precision data in relation to methods of test
ISO 14597 Petroleum products — Determination of vanadium and nickel content — Wave length dispersive X-ray fluorescence spectrometry
IP 501 Determination of aluminium, silicon, vanadium, nickel, iron, sodium, calcium, zinc andphosphorus in residual fuel oil by ashing, fusion and inductively coupled plasma emission spectrometry
IP 570 Determination of hydrogen sulfide in fuel oils — Rapid liquid phase extraction method
3 Classification and Designation
Product classification and designation of this standard are consistent with the requirements of ISO 8216-1:2010(E).
4 Requirements and Test Methods
4.1 The fuel shall conform to the characteristics and limits given in Table 1 or Table 2, as appropriate, when tested in accordance with the methods specified.
Foreword II
1 Scope
2 Normative References
3 Classification and Designation
4 Requirements and Test Methods
5 Inspection Rules
6 Packing, Marking, Transportation and Storage
7 Safety
8 Precision and Interpretation of Test Results
Appendix A (Informative) Bio-derived products and Fatty Acid Methyl Esters (FAMEs)
Appendix B (Informative) Deleterious Materials
Appendix C (Informative) Sulfur Content
Appendix D (Informative) Hydrogen Sulfide
Appendix E (Informative) Specific Energy
Appendix F (Informative) Ignition Characteristics of Residual Marine Fuels
Appendix G (Informative) Flash Point
Appendix H (Informative) Acidity
Appendix I (Informative) Sodium and Vanadium
Appendix J (Informative) Catalyst Fines
Appendix K (Informative) Used Lubricating Oils
Appendix L (Informative) Precision and Interpretation of Test Results
Appendix M (Informative) The Main Changes between This Standard and GB/T 17411-1998
Appendix N (Informative) Comparison of Chapter and Article Numbers, Technical Differences between This Standard and ISO 8217:2010(E) and Their Reasons
Bibliography
1 Scope
This standard specifies the classification and designation, requirements and test methods, inspection rules, packaging, marking, transportation, storage and safety for petroleum fuels for use in marine diesel engines and boilers (prior to appropriate treatment before use).
The specifications for fuels in this standard can also be applicable to fuels for stationary diesel engines of the same or similar make and type as those used for marine purposes.
This standard specifies four categories of distillate fuel, one of which is for diesel engines for emergency purposes. It also specifies six categories of residual fuel.
Note 1: For the purpose of this standard, the term “petroleum” is used to include oil from tar sands and from shale.
Note 2: Technical requirements for gas turbine fuels used in marine applications are specified in GB/T 29114-2012[1].
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB 190 Packing symbol of dangerous goods
GB/T 260 Determination of water content in petroleum products
GB/T 261 Determination of flash point — Pensky-Martens closed cup method(GB/T 261-2008, ISO 2719:2002, MOD)
GB/T 265 Petroleum products — Determination of kinematic viscosity and calculation of dynamic viscosity
GB/T 387 Dark petroleum products — Determination of sulphur content-Tubular oven method
GB/T 508 Petroleum products — Determination of ash (GB/T 508-1985, eqv ISO 6245:1982)
GB/T 1884 Crude petroleum and liquid petroleum products — Laboratory determination of density — Hydrometer method (GB/T 1884-2000, eqv ISO 3675:1998)
GB/T 1885 Petroleum measurement tables(GB/T 1885-1998, eqv ISO 91-2:1991)
GB/T 3535 Petroleum products — Determination of pour point (GB/T 3535-2006, ISO 3016-1994, MOD)
GB/T 4756 Petroleum liquids — Manual sampling (GB/T 4756-1998, eqv ISO 3170:1988)
GB/T 6986 Petroleum oils — Determination of cloud point (GB/T 6986-1986, eqv ISO 3015:1974)
GB/T 7304 Petroleum products and lubricants — Determination of neutralization number; Potentiometric titration method
GB/T 11137 Black petroleum products — Determination of kinematic viscosity(reverse-flow method) and calculation of dynamic viscosity
GB/T 11140 Standard test method for sulfur in petroleum products by wavelength dispersive X-ray fluorescence spectrometry
GB/T 12575 Liquid fuel oils — Determination of vanadium content-Flameless atomic absorption spectroscopic method
GB 13690 General rule for classification and hazard communication of chemicals
GB/T 17040 Standard test method for sulfur in petroleum and petroleum products by energy dispersive X-ray fluorescence spectrometry
GB/T 17144 Petroleum products — Determination of carbon residue — Micro method (GB/T 17144-1998, eqv ISO 10370:1993)
GB 20581 Safety rules for classification, precautionary labelling and precautionary statements of chemicals — Flammable liquids
GB/T 23801 Determination of fatty acid methyl esters(FAME) in middle distillates by infrared spectroscopy method
GB/T 20828 Biodiesel blend stock (BD100) for diesel engine fuels
SH 0164 Petroleum products — Rules for packaging, storage, transportation, delivery and acceptance
SH/T 0172 Determination of sulfur in petroleum products (high-temperature method)
SH/T 0175 Standard test method for oxidation stability of distillate fuel oil (accelerated method)
SH/T 0604 Crude petroleum and petroleum products — Determination of density-Oscillating U-tube method (SH/T 0604-2000, eqv ISO 12185:1996)
SH/T 0694 Calculation of cetane index of middle-distillate fuels by the four-variable equation (SH/T 0694-2000, eqv ISO 4264:1995)
SH/T 0701 Determination of total sediment in residual fuel oils by hot filtration (SH/T 0701-2001, eqv ISO 10307-1:1993)
SH/T 0702 Determination of total sediment in residual fuel oils (standard procedures for ageing) (SH/T 0702-2001, eqv ISO 10307-2:1993)
SH/T 0706 Petroleum products — Determination of aluminium and silicon in fuel oils-Inductively coupled plasma emission and atomic absorption spectroscopy methods (SH/T 0706-2001, eqv ISO 10478:1994)
SH/T 0715 Standard test methods for determination of nickel vanadium and iron in crude oils and residual fuels by inductively coupled plasma (ICP) atomic emission spectrometry
SH/T 0765 Diesel fuel — Assessment of lubricity using the high-frequency reciprocating rig (HFRR) (SH/T 0765-2005, ISO 12156-1:1997MOD)
ISO 8216-1:2010 Petroleum products-Fuels (class F) classification — Part 1: Categories of marine fuels
ISO 4259:2006 Petroleum products — Determination and application of precision data in relation to methods of test
ISO 14597 Petroleum products — Determination of vanadium and nickel content — Wave length dispersive X-ray fluorescence spectrometry
IP 501 Determination of aluminium, silicon, vanadium, nickel, iron, sodium, calcium, zinc andphosphorus in residual fuel oil by ashing, fusion and inductively coupled plasma emission spectrometry
IP 570 Determination of hydrogen sulfide in fuel oils — Rapid liquid phase extraction method
3 Classification and Designation
Product classification and designation of this standard are consistent with the requirements of ISO 8216-1:2010(E).
4 Requirements and Test Methods
4.1 The fuel shall conform to the characteristics and limits given in Table 1 or Table 2, as appropriate, when tested in accordance with the methods specified.
Contents of GB/T 17411-2012
Foreword II
1 Scope
2 Normative References
3 Classification and Designation
4 Requirements and Test Methods
5 Inspection Rules
6 Packing, Marking, Transportation and Storage
7 Safety
8 Precision and Interpretation of Test Results
Appendix A (Informative) Bio-derived products and Fatty Acid Methyl Esters (FAMEs)
Appendix B (Informative) Deleterious Materials
Appendix C (Informative) Sulfur Content
Appendix D (Informative) Hydrogen Sulfide
Appendix E (Informative) Specific Energy
Appendix F (Informative) Ignition Characteristics of Residual Marine Fuels
Appendix G (Informative) Flash Point
Appendix H (Informative) Acidity
Appendix I (Informative) Sodium and Vanadium
Appendix J (Informative) Catalyst Fines
Appendix K (Informative) Used Lubricating Oils
Appendix L (Informative) Precision and Interpretation of Test Results
Appendix M (Informative) The Main Changes between This Standard and GB/T 17411-1998
Appendix N (Informative) Comparison of Chapter and Article Numbers, Technical Differences between This Standard and ISO 8217:2010(E) and Their Reasons
Bibliography
