Standard No.:	GB/T 21196.1-2007
English Name:	Textiles—Determination of the abrasion resistance of fabrics by the Martindale method—Part 1:Martindale abrasion testing apparatus
Chinese Name:	纺织品马丁代尔法织物耐磨性的测定第1部分:马丁代尔耐磨试验仪
Chinese Classification:	W04    Basic standards and general methods
Professional Classification:	GB    National Standard
ICS Classification:	59.080.30 59.080.30    Textile fabrics 59.080.30
Issued by:	AQSIQ; SAC
Issued on:	2007-11-12
Implemented on:	2008-7-1
Status:	valid
Language:	English
File Format:	PDF
Word Count:	4000 words
Price(USD):	100.0
Delivery:	via email in 1 business day

1 Scope This part of GB/T 21196 specifies requirements for the Martindale testing apparatus and auxiliary materials for use in the test methods specified in parts 2 to 4 of GB/T 21196 for determination of the abrasion resistance of fabrics. This part is applicable to apparatus for the testing of: a) woven and knitted fabrics; b) pile textiles having a pile height of up to 2 mm; c) nonwovens; d) Coated fabric: base cloth is woven or knitted fabric, and the coating form a continuous film on the fabric surface. Note: The choice of method of abrasion testing is established before the start of the testing and recorded in the test report, since the results of the different methods cannot be compared with each other. The determination of resistance to pilling of fabrics using the Martindale apparatus is given in ISO 12945-2 Textiles — Determination of the resistance to pilling and change of appearance of fabrics — Part 2: Modified Martindale method). 2 Normative References The following normative documents contain provisions which, through reference in this text, constitute provisions of this part of GB/T 21196. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this part are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. GB/T 1800.4 Limits and fits — Tables of standard tolerance grades and limit deviations for holes and shafts (GB/T 1800.4-1999, eqv ISO 286-2:1998) GB/T 2543.1 Textiles — Determination of twist in yarn — Part 1: Direct counting method (GB/T 2543.1-2001, eqv ISO 2061:1995) GB/T 3820 Determination of thickness of textiles and textile products (GB/T 3820-1997, eqv ISO 5084:1996) GB/T 4743 Textiles — Yarn from packages — Determination of linear density (mass per unit length) by the skein method (GB/T 4743-1995, neq ISO 2060:1994) GB/T 4668 Textiles — Woven fabrics — Determination of number of threads per unit length (GB/T 4668-1995, neq ISO 7211-2:1984) GB/T 4669 Textiles — Woven fabrics — Determination of mass per unit length and mass per unit area (GB/T 4669-1995, eqv ISO 3801:1977) GB/T 6343 Cellular plastics and rubbers — Determination of apparent (bulk) density (GB/T 6343-1995, neq ISO 845:1988) GB/T 10685 Test method for determining wool fibres diameter by the projection microscope (GB/T 10685-1989, neq ISO 137:1985) GB/T 21196.2 Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 2: Determination of specimen breakdown (GB/T 21196.2-2007, ISO 12947-2:1998, MOD) GB/T 21196.3 Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 3: Determination of mass loss (GB/T 21196.3-2007, ISO 12947-3:1998, MOD) FZ/T 20018 Wool — Determination of dichloromethane-soluble matter in textiles (FZ/T 20018-2000, eqv ISO 3074:1975) HG/T 3050.3 Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 3: Method for the determination of thickness (HG/T 3050.3-2001, idt ISO 2286-3:1998) 3 Terms and Definitions For the purposes of this part of GB/T 21196, the following terms and definitions apply. 3.1 Abrasion rub