1 Scope
This standard specifies the radial internal clearance value of insert bearing and measuring principles.
This standard is not applicable to the insert bearing without extend inner ring, which should refer to GB/T 4604-2006.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments to (excluding amending errors in the text), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of the normative document is applicable. For undated references, the latest edition of the normative document applies.
GB/T 3882-1995 Rolling Bearings - Insert Bearings and Eccentric Looking Collars - Boundary Dimensions (neq ISO 9628:1992)
GB/T 4604-2006 Rolling Bearings - Radial Internal Clearance (ISO 5753:1991, MOD)
GB/T 6930-2002 Rolling Bearings - Vocabulary (ISO 5593:1997, IDT)
GB/T 7811-2007 Rolling Bearings - Symbols for Quantities (ISO 15241:2001, IDT)
JB/T 6640-2007 Rolling Bearings - Insert Bearing Units - Identification Code
Contents
Foreword I
1 Scope
2 Normative References
3 Definition
4 Symbols
5 Code
6 Radial Internal Clearance Value
7 Measuring Principles for Radial Internal Clearance
1 Scope
This standard specifies the radial internal clearance value of insert bearing and measuring principles.
This standard is not applicable to the insert bearing without extend inner ring, which should refer to GB/T 4604-2006.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments to (excluding amending errors in the text), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of the normative document is applicable. For undated references, the latest edition of the normative document applies.
GB/T 3882-1995 Rolling Bearings - Insert Bearings and Eccentric Looking Collars - Boundary Dimensions (neq ISO 9628:1992)
GB/T 4604-2006 Rolling Bearings - Radial Internal Clearance (ISO 5753:1991, MOD)
GB/T 6930-2002 Rolling Bearings - Vocabulary (ISO 5593:1997, IDT)
GB/T 7811-2007 Rolling Bearings - Symbols for Quantities (ISO 15241:2001, IDT)
JB/T 6640-2007 Rolling Bearings - Insert Bearing Units - Identification Code
Contents of GB/T 25766-2010
Contents
Foreword I
1 Scope
2 Normative References
3 Definition
4 Symbols
5 Code
6 Radial Internal Clearance Value
7 Measuring Principles for Radial Internal Clearance