GB/T 7165.4-2008 Equipment for Continuous Monitoring of Radioactivity in Gaseous Effluents - Part 4: Specific Requirements for Radioactive Iodine Monitors (English Version)
This part of GB/T 7165 is applicable to equipment intended for the simultaneous, delayed or discrete sequential measurement of radioactive iodine in all forms. When the effluent is sampled for measurement, iodine bound on aerosols is generally collected on a prefilter which shall be analyzed separately in a laboratory to provide a complete measurement.
It is applicable to equipment designed to fulfill the following functions:
——The measurement of the volumic activity of iodine and compounds of radioactive iodine in gaseous effluents or of the released iodine total activity;
——The actuation of an alarm signal when either a predetermined concentration or a predetermined total released activity due to iodine or its compounds is exceeded.
This equipment is intended for measurement over a wide range of activity in the presence of other radionuclides in the gaseous effluent, including naturally occurring radioactive nuclides. Discrimination against other radionuclides can be important in measuring low levels of radioactive iodine.
This part considers both the use of iodine collection media such as activated charcoal and the direct measurement of iodine in stacks or ventilation ducts.
The object of this part is to lay down specific standard requirements, including technical characteristics and general test conditions, and to give examples of acceptable methods for iodine monitors as defined in Chapter4.
The general requirements, technical characteristics, test procedures, radiation characteristics, electrical, mechanical, safety and environmental characteristics are given in GB/T 7165.1-2005. Unless otherwise stated, these requirements apply in this part.
Foreword I
1 Scope
2 Normative References
3 Terms and Definitions
4 Classification of iodine monitors
5 Sampling and Detection Assembly (where applicable)
6 Check source
7 Expression of Measurement
8 Response to Other Ionizing Radiations
9 Discrimination against Natural Activity
10 Standard Test Conditions
11 Tests Performed with Variation of the Influence Quantities
12 Reference and Special Sources
13 Radiation Performance Test
14 Tests of the Air Circuit
15 Type Test Report and Certificate
GB/T 7165.4-2008 Equipment for Continuous Monitoring of Radioactivity in Gaseous Effluents - Part 4: Specific Requirements for Radioactive Iodine Monitors (English Version)
Standard No.
GB/T 7165.4-2008
Status
valid
Language
English
File Format
PDF
Word Count
4500 words
Price(USD)
110.0
Implemented on
2009-4-1
Delivery
via email in 1 business day
Detail of GB/T 7165.4-2008
Standard No.
GB/T 7165.4-2008
English Name
Equipment for Continuous Monitoring of Radioactivity in Gaseous Effluents - Part 4: Specific Requirements for Radioactive Iodine Monitors
This part of GB/T 7165 is applicable to equipment intended for the simultaneous, delayed or discrete sequential measurement of radioactive iodine in all forms. When the effluent is sampled for measurement, iodine bound on aerosols is generally collected on a prefilter which shall be analyzed separately in a laboratory to provide a complete measurement.
It is applicable to equipment designed to fulfill the following functions:
——The measurement of the volumic activity of iodine and compounds of radioactive iodine in gaseous effluents or of the released iodine total activity;
——The actuation of an alarm signal when either a predetermined concentration or a predetermined total released activity due to iodine or its compounds is exceeded.
This equipment is intended for measurement over a wide range of activity in the presence of other radionuclides in the gaseous effluent, including naturally occurring radioactive nuclides. Discrimination against other radionuclides can be important in measuring low levels of radioactive iodine.
This part considers both the use of iodine collection media such as activated charcoal and the direct measurement of iodine in stacks or ventilation ducts.
The object of this part is to lay down specific standard requirements, including technical characteristics and general test conditions, and to give examples of acceptable methods for iodine monitors as defined in Chapter4.
The general requirements, technical characteristics, test procedures, radiation characteristics, electrical, mechanical, safety and environmental characteristics are given in GB/T 7165.1-2005. Unless otherwise stated, these requirements apply in this part.
Contents of GB/T 7165.4-2008
Foreword I
1 Scope
2 Normative References
3 Terms and Definitions
4 Classification of iodine monitors
5 Sampling and Detection Assembly (where applicable)
6 Check source
7 Expression of Measurement
8 Response to Other Ionizing Radiations
9 Discrimination against Natural Activity
10 Standard Test Conditions
11 Tests Performed with Variation of the Influence Quantities
12 Reference and Special Sources
13 Radiation Performance Test
14 Tests of the Air Circuit
15 Type Test Report and Certificate
