1 Scope
This Part of JB/T 8137 specifies materials, model and specification, basic technical requirements and inspection items of the wood delivery drums (hereinafter referred to as "delivery drums").
This Part is applicable to the wood delivery drums.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated reference, only the edition cited applies. For undated reference, the latest edition (including all the amendments) applies.
GB/T 153 Coniferous Sawn Timber
GB/T 4817 Broadleaved Sawn Timber
GB/T 9846.3 Plywood - Part 3: General Specification for Plywood for General Use
JB/T 8137.1-2013 Delivery Drums for Wires and Cables - Part 1: General Specifies
3 Materials
Foreword I
1 Scope
2 Normative References
3 Materials
4 Model
5 Specification Range
6 Basic Technical Requirements
6.1 Selection of Structure
6.2 Dimension Deviation
6.3 Side Plate Batten
6.4 Drum
6.5 Side Plate
6.6 Appearance Quality
6.7 Bearing Load
6.8 Other Requirements
7 Inspection Items
Figure 1 Wood Delivery Drums
Table 1 Model of the Delivery Drums
Table 2 Dimension Deviation of the Delivery Drums In mm
Table 3 Dimension of the Side Plate Batten In mm
Table 4 Inspection Items and the Requirements
1 Scope
This Part of JB/T 8137 specifies materials, model and specification, basic technical requirements and inspection items of the wood delivery drums (hereinafter referred to as "delivery drums").
This Part is applicable to the wood delivery drums.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated reference, only the edition cited applies. For undated reference, the latest edition (including all the amendments) applies.
GB/T 153 Coniferous Sawn Timber
GB/T 4817 Broadleaved Sawn Timber
GB/T 9846.3 Plywood - Part 3: General Specification for Plywood for General Use
JB/T 8137.1-2013 Delivery Drums for Wires and Cables - Part 1: General Specifies
3 Materials
Contents of JB/T 8137.2-2013
Foreword I
1 Scope
2 Normative References
3 Materials
4 Model
5 Specification Range
6 Basic Technical Requirements
6.1 Selection of Structure
6.2 Dimension Deviation
6.3 Side Plate Batten
6.4 Drum
6.5 Side Plate
6.6 Appearance Quality
6.7 Bearing Load
6.8 Other Requirements
7 Inspection Items
Figure 1 Wood Delivery Drums
Table 1 Model of the Delivery Drums
Table 2 Dimension Deviation of the Delivery Drums In mm
Table 3 Dimension of the Side Plate Batten In mm
Table 4 Inspection Items and the Requirements