Standard No.:	SH 3501-2002
English Name:	Specification for construction and acceptance of hypertoxic and combustible medium piping engineering in petrochemical industry
Chinese Name:	石油化工有毒、可燃介质管道工程施工及验收规范
Professional Classification:	SH    Professional Standard - Petrochemical
Issued by:	SETC
Implemented on:	2003-5-1
Status:	superseded
Superseded by:	SH 3501-2011 Construction and acceptance Specification for toxic and combustible medium steel piping engineering in petrochemical industry
Superseded on:	2011-6-1
Language:	English
File Format:	PDF
Word Count:	20000 words
Price(USD):	500.0
Delivery:	via email in 1 business day

1．General 1.0.1 This specification applies to the construction and acceptance of newly built, renovated and expanded projects of supertoxic (the degree of toxicity is extreme hazard and high hazard) and flammable medium steel piping with design pressure of 400Pa (absolute pressure) ~ 42 Mpa (gauge indicated pressure) and design temperature of –196 ~ 850℃ in petrochemical industrial enterprises. 1.0.2 This specification does not apply to the construction and acceptance of long distance delivery piping and township utility fuel gas piping. 1.0.3 For the construction of supertoxic and flammable medium piping, it shall also, in addition to implementing the regulations of this specification, be in conformity with stipulations of design documents and relevant standards in force. 1.0.4 During the construction of supertoxic and flammable medium piping, any alteration of design or material substitution shall be approved by the designer. 1.0.5 The safety techniques and labor protection in piping construction shall implement stipulations in State relevant codes and standards in force as well as Technical Regulations for Safety Techniques in Petrochemical Construction SH 3505. When the construction is made in an area where the production has been put into operation, technical measures for safety construction shall be worked out and provided in the light of the characteristics of the production area. 1.0.6 The contractor undertaking the construction of supertoxic and flammable medium piping shall have obtained license for installation of relevant pressure piping issued by administration department for quality technical supervision. 1.0.7 The welder engaging in the construction of supertoxic and flammable medium piping shall be tested and have obtained qualification certificate in accordance with Management Regulations for Welder Test of Boiler and Pressure Vessel Piping. The personnel for non-destructive inspection shall be tested and have obtained qualification certificate in accordance with Regulations for Qualification Test of Boiler and Pressure Vessel Non-destructive Inspection Test Personnel. 2. Piping Classification 2.0.1 The classification of supertoxic and flammable medium piping shall be in conformity with stipulations in Table 2.0.1.

1． General………………………………………………………………………………… 2． Piping Classification………………………………………………………………… 3． Inspection of Piping Components…………………………………………………… 3.1 General Regulations…………………………………………………………………… 3.2 Pipe Inspection………………………………………………………………………… 3.3 Valve Inspection……………………………………………………………………… 3.4 Inspection of Other Piping Components……………………………………………… 4． Piping Prefabrication and Installation……………………………………………… 4.1 Piping Prefabrication………………………………………………………………… 4.2 Piping Installation…………………………………………………………………… 5． Piping Welding……………………………………………………………………… 5.1 General Regulations………………………………………………………………… 5.2 Preparation before Welding and Mating of Joints…………………………………… 5.3 Welding Process Requirements……………………………………………………… 5.4 Preheating and Heat Treatment……………………………………………………… 5.5 Quality Inspection…………………………………………………………………… 6． Test of Piping System……………………………………………………………… 6.1 Pressure Test of Piping System……………………………………………………… 6.2 Purging of Piping System…………………………………………………………… 6.3 Gas Leakage Test and Vacuum Test………………………………………………… 7． Documentation for Hand Over…………………………………………………… Appendix A Common Use Supertoxic and Combustible Mediums………………………… Appendix B Record for Bend Processing of SHA Class Piping…………………… Appendix C Type of Bevels of Welding Joints and Requirements for Mating……… Description of Wording………………………………………………………………… Attachment Description of articles