1 Scope
This standard specifies the terms and definitions, technical requirements, inspection methods and rules, and marking, rust prevention, packaging, storage and transportation of spheroidal graphite castings (hereinafter referred to as "castings").
This standard is applicable to common and low alloy spheroidal graphite castings of sand mold or mold with equivalent thermal conductivity with sand mold for rolling stock (including railway crane). Spheroidal graphite castings produced by other casting methods (e.g., metal mold casting, shell mold casting, investment casting, continuous casting etc.) may also refer to this standard.
2 Normative References
The following documents for the application of this document are essential. Any dated reference, just dated edition applies to this document. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 223.9 Iron, Steel and Alloy - Determination of Aluminium Content - Chrom Azurol S Photometric Method
GB/T 223.12 Methods for Chemical Analysis of Iron, Steel and Alloy - The Sodium Carbonate Separation - Diphenyl Carbazide Photometric Method for the Determination of Chromium Content
GB/T 223.26 Iron Steel and Alloy - Determination of Molybdenum Content - The Thiocyanate Spectrophotometric Method
GB/T 223.59 Iron Steel and Alloy - Determination of Phosphorus Content - Bismuth Phosphomolybdate Blue Spectrophotometric Method and Antimony Phosphomolybdate Blue Spectrophotometric Method
GB/T 223.60 Methods for Chemical Analysis of Iron, Steel and Alloy - The Perchloric Acid Dehydration Gravimetric Method for the Determination of Silicon Content
GB/T 223.64 Iron, Steel and Alloy - Determination of Manganese Content - Flame Atomic Absorption Spectrometric Method (GB/T 223.64-2008, ISO 10700:1994, IDT)
GB/T 228.1 Metallic Materials - Tensile Testing - Part 1 : Method of Test at Room Temperature (GB/T 228.1-2010, ISO 6892-1: 2009, MOD)
GB/T 229 Metallic Materials - Charpy Pendulum Impact Test Method (GB/T 229-2007, ISO 148-1:2006, MOD)
GB/T 231.1 Metallic Materials - Brinell Hardness Test - Part 1: Test Method (GB/T 231.1-2009, ISO 6506-1:2005, MOD)
GB/T 1348 Spheroidal Graphite Iron Castings (GB/T 1348-2009, ISO 1083: 2004, MOD)
GB/T 5677 Radiographic Testing for Steel Castings (GB/T 5677-2007, ISO 4993:1987, IDT)
GB/T 5678 Sampling Methods of Spectrochemical Analysis for Cast Alloys
GB/T 6414-1999 Castings - System of Dimensional Tolerances and Machining Allowances (eqv ISO 8062:1994)
GB/T 7233.1 Steel Castings - Ultrasonic Examination - Part 1: Steel Castings for General Purposes (GB/T 7233.1-2009, ISO 4992-1:2006, MOD)
GB/T 9441-2009 Metallographic Test for Spheroidal Graphite Cast Iron (ISO 945-1:2008, MOD)
GB/T 9444 Magnetic Particle Testing for Steel Castings (GB/T 9444-2007, ISO 4986:1992, IDT)
GB/T 11351 Mass Tolerances for Castings
GB/T 15056 Evaluation Method on Cast Surface Roughness
GB/T 20066 Steel and Iron - Sampling and Preparation of Samples for the Determination of Chemical Composition (GB/T 20066-2006, ISO 14284:1996, IDT)
GB/T 20123 Steel and Iron - Determination of Total Carbon and Sulfur Content - Infrared Absorption Method after Combustion in an Induction Furnace (Routine Method) (GB/T 20123-2006, ISO 15350:2000, IDT)
GB/T 24234 Cast Iron - Determination of Multi-element Contents - Spark Discharge Atomic Emission Spectrometric Method (Routine Method)
JB/T 5105 Casting Form - Pattern Draft
JY/T 015 General Rules for Inductivity Coupled Plasma-atomic Emission Spectrometry
3 Terminologies and Definitions
For the purposes of this standard, the terminologies and definitions defined in GB/T 1348 apply.
Foreword i
1 Scope
2 Normative References
3 Terminologies and Definitions
4 Technical Requirements
5 Inspection Methods and Rules
6 Marking, Rust Prevention, Packaging, Storage and Transportation
1 Scope
This standard specifies the terms and definitions, technical requirements, inspection methods and rules, and marking, rust prevention, packaging, storage and transportation of spheroidal graphite castings (hereinafter referred to as "castings").
This standard is applicable to common and low alloy spheroidal graphite castings of sand mold or mold with equivalent thermal conductivity with sand mold for rolling stock (including railway crane). Spheroidal graphite castings produced by other casting methods (e.g., metal mold casting, shell mold casting, investment casting, continuous casting etc.) may also refer to this standard.
2 Normative References
The following documents for the application of this document are essential. Any dated reference, just dated edition applies to this document. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 223.9 Iron, Steel and Alloy - Determination of Aluminium Content - Chrom Azurol S Photometric Method
GB/T 223.12 Methods for Chemical Analysis of Iron, Steel and Alloy - The Sodium Carbonate Separation - Diphenyl Carbazide Photometric Method for the Determination of Chromium Content
GB/T 223.26 Iron Steel and Alloy - Determination of Molybdenum Content - The Thiocyanate Spectrophotometric Method
GB/T 223.59 Iron Steel and Alloy - Determination of Phosphorus Content - Bismuth Phosphomolybdate Blue Spectrophotometric Method and Antimony Phosphomolybdate Blue Spectrophotometric Method
GB/T 223.60 Methods for Chemical Analysis of Iron, Steel and Alloy - The Perchloric Acid Dehydration Gravimetric Method for the Determination of Silicon Content
GB/T 223.64 Iron, Steel and Alloy - Determination of Manganese Content - Flame Atomic Absorption Spectrometric Method (GB/T 223.64-2008, ISO 10700:1994, IDT)
GB/T 228.1 Metallic Materials - Tensile Testing - Part 1 : Method of Test at Room Temperature (GB/T 228.1-2010, ISO 6892-1: 2009, MOD)
GB/T 229 Metallic Materials - Charpy Pendulum Impact Test Method (GB/T 229-2007, ISO 148-1:2006, MOD)
GB/T 231.1 Metallic Materials - Brinell Hardness Test - Part 1: Test Method (GB/T 231.1-2009, ISO 6506-1:2005, MOD)
GB/T 1348 Spheroidal Graphite Iron Castings (GB/T 1348-2009, ISO 1083: 2004, MOD)
GB/T 5677 Radiographic Testing for Steel Castings (GB/T 5677-2007, ISO 4993:1987, IDT)
GB/T 5678 Sampling Methods of Spectrochemical Analysis for Cast Alloys
GB/T 6414-1999 Castings - System of Dimensional Tolerances and Machining Allowances (eqv ISO 8062:1994)
GB/T 7233.1 Steel Castings - Ultrasonic Examination - Part 1: Steel Castings for General Purposes (GB/T 7233.1-2009, ISO 4992-1:2006, MOD)
GB/T 9441-2009 Metallographic Test for Spheroidal Graphite Cast Iron (ISO 945-1:2008, MOD)
GB/T 9444 Magnetic Particle Testing for Steel Castings (GB/T 9444-2007, ISO 4986:1992, IDT)
GB/T 11351 Mass Tolerances for Castings
GB/T 15056 Evaluation Method on Cast Surface Roughness
GB/T 20066 Steel and Iron - Sampling and Preparation of Samples for the Determination of Chemical Composition (GB/T 20066-2006, ISO 14284:1996, IDT)
GB/T 20123 Steel and Iron - Determination of Total Carbon and Sulfur Content - Infrared Absorption Method after Combustion in an Induction Furnace (Routine Method) (GB/T 20123-2006, ISO 15350:2000, IDT)
GB/T 24234 Cast Iron - Determination of Multi-element Contents - Spark Discharge Atomic Emission Spectrometric Method (Routine Method)
JB/T 5105 Casting Form - Pattern Draft
JY/T 015 General Rules for Inductivity Coupled Plasma-atomic Emission Spectrometry
3 Terminologies and Definitions
For the purposes of this standard, the terminologies and definitions defined in GB/T 1348 apply.
Contents of TB/T 1465-2015
Foreword i
1 Scope
2 Normative References
3 Terminologies and Definitions
4 Technical Requirements
5 Inspection Methods and Rules
6 Marking, Rust Prevention, Packaging, Storage and Transportation
