General Technical Specification for the Bogies of Railway Passenger Coach
铁路客车转向架通用技术条件
1 Scope
This standard specifies the contents of classifications, general technical requirements, overall requirements, the characteristic requirements of all parts, completion requirements, test methods, inspection rules, marking and other aspects of the bogies of railway passenger coach.
This standard is applicable to the bogies of new railway passenger coach whose design speed of standard-gage railway is not greater than 200km/h, and it also can be taken as reference to the bogies of electric multiple units.
2 Normative References
The following standards contain provisions which, through reference in this standard, constitute provisions of this standard. For dated reference, subsequent amendments (excluding corrections) to, or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of these documents applies. For undated references, the latest edition applies to this document.
GB 146.1-1983 Rolling Stock Gauge for Standard Gauge Railways
GB/T 5599-1985 Railway Rolling Stock; Specification for Evaluation the Dynamic Performance and Accreditation Test
GB/T 12814-2002 Axles for Railway Cars - Types and Basic Dimensions
TB/T 54-1993 Finished Round Pin
TB/T 55-1993 Semifinished Round Pin
TB/T 1025-2000 Technical Specifications for Hot Rolling Helical Compression Spring Supply Used for Rolling Stock
TB/T 1240-1991 Steel Sleeve
TB/T 1335-1996 Strength Design and Test Evaluation Specifications for Rolling Stock
TB/T 1491 General Technical Specification for Oil Damper of Locomotive and Rolling Stock
TB/T 1661-1991 High Phosphor Brake Shoe for Rolling Stock
TB/T 1716-1986 Technical Specification for Journal Box Used in Cylindrical Rolling Bearing of Railway Newly-made Rolling Stock
TB/T 1718-2003 Technical Requirements of Railway Rolling Stock's Wheelset Installation
TB/T 2235-2002 Technical Specification of Rolling Bearing in the Railway Passenger Car and Wagon
TB/T 2425-1993 Cleanliness of Rolling Bearing in the Railway Passenger Car and Wagon
TB/T 2427-1993 Technical Specification for Journal Box Used in Rolling Bearing of Railway Passenger Car
TB/T 2562-1995 Test Method for Static Balance of Wheel and Dynamic Balance of Wheelset of Railway Passenger Car
TB/T 2637-1995 Technical Specification for Bogie Frame and Bolster of Railway Passenger Car
TB/T 2708-1996 Technical Specifications for Rolled Solid Wheels of Railway Rapid Passenger Car
TB/T 2817-1997 Technical Specifications for Rolled Solid Wheels for Railway Rolling Stock
TB/T 2841 Test Methods for Air Spring of Railway Rolling Stock
TB/T 2843-1997 General Technical Specification for Rubber Elastic Element of Rolling Stock
TB/T 2945-1999 Technical Specifications for LZ 50 Steel Axle and Steel Billet of Railway Rolling Stock
TB/T 2949-1999 General Technical Specifications for Height Adjustment Valve of Rolling Stock
TB/T 2980-2000 Technical Specifications for Brake Disc of Railway Passenger Car
3 Classification of Bogies
3.1 Bogies with a design speed of v≤120 km/h
The main structural types include:
a) Adopt the suspension structure with/without swing bolsters;
b) Adopt the axle-mounted disc braking (it may be complemented by tread cleaner and brake electronic antiskid device) or the tread brake;
c) It may be complemented by the axle end grounding device, automatic empty and load brake equipment, etc.
3.2 Bogies with a design speed of 120km/h
Contents of TB/T 1490-2004
Foreword II
1 Scope
2 Normative References
3 Classification of Bogies
4 General Technical Requirements
5 General Requirements
6 Characteristic Requirements of All Parts
7 Completion Requirements
8 Test Methods
9 Inspection Rules
10 Marking and Others