This part specifies the terms and definitions, technical requirements, measurement and test methods, quality assessment procedure, inspection rules and marking, packaging, transport and storage for the type LC family of plastic optical fiber connectors.
This part is applicable to the type LC family of plastic optical fiber connectors (hereinafter referred to as "Type LC connector").
Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 Technical Requirements
4.1 Classification
4.2 Interface Forms and Mate Dimension
4.3 Materials
4.4 Standard Connector
4.5 Optical Performance of Type LC Connector
4.6 Working Temperature of Type LC Connector
4.7 Environmental Protection Conformance
5 Measurement and Testing
5.1 Appearance Inspection
5.2 Boundary Dimensions
5.3 Measurement and Testing Conditions
5.4 Measurement of Insertion Loss
5.5 Testing
6 Procedure of Quality Assessment
6.1 General
6.2 Qualification Approval Procedure
6.3 Quality Conformity Inspection
7 Inspection
7.1 Classification of Inspection
7.2 Delivery Inspection
7.3 Type Inspection
8 Marking, Packaging, Transport and Storage
8.1 Marking
8.2 Packaging
8.3 Transport
8.4 Storage
This part specifies the terms and definitions, technical requirements, measurement and test methods, quality assessment procedure, inspection rules and marking, packaging, transport and storage for the type LC family of plastic optical fiber connectors.
This part is applicable to the type LC family of plastic optical fiber connectors (hereinafter referred to as "Type LC connector").
Contents of YD/T 2554.1-2013
Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 Technical Requirements
4.1 Classification
4.2 Interface Forms and Mate Dimension
4.3 Materials
4.4 Standard Connector
4.5 Optical Performance of Type LC Connector
4.6 Working Temperature of Type LC Connector
4.7 Environmental Protection Conformance
5 Measurement and Testing
5.1 Appearance Inspection
5.2 Boundary Dimensions
5.3 Measurement and Testing Conditions
5.4 Measurement of Insertion Loss
5.5 Testing
6 Procedure of Quality Assessment
6.1 General
6.2 Qualification Approval Procedure
6.3 Quality Conformity Inspection
7 Inspection
7.1 Classification of Inspection
7.2 Delivery Inspection
7.3 Type Inspection
8 Marking, Packaging, Transport and Storage
8.1 Marking
8.2 Packaging
8.3 Transport
8.4 Storage