| Title |
Standard No. |
Implemented On |
| Implants for surgery—Metallic materials—Part 4: Cobalt-chromium-molybdenum casting alloy | GB 4234.4-2019 | 2021-5-1 |
| Porous tantalum material for surgical implant applications | GB/T 36983-2018 | 2021-1-1 |
| X-ray CT testing method of the porous metal materials for surgical implant applications | GB/T 36984-2018 | 2021-1-1 |
| Joint replacement implants - Shoulder prostheses - Standard test method for static evaluation of glenoid locking mechanism in shear | YY/T 1647-2019 | 2020-10-1 |
| Guide for radial loading of balloon expandable andself expanding vascular stents | YY/T 1660-2019 | 2020-8-1 |
| Implants for osteosynthesis—Standard test method for measuring fretting corrosion of osteosynthesis plates and screws | YY/T 1655-2019 | 2020-6-1 |
| Joint replacement implants―Shoulder prostheses―Standard test methods for dynamic evaluation of glenoid loosening or disassociation | YY/T 1634-2018 | 2020-1-1 |
| Implants for surgery―Standard test method for dissolution testing of calcium phosphate granules,fabricated forms and coatings | YY/T 1640-2018 | 2020-1-1 |
| Surgical implants. Anodizing oxide layers on titanium and titanium alloys. General requirements | YY/T 1615-2018 | 2019-11-1 |
| Cutting tools for electric osseous tissue surgical equipment—Part 2:Cranial perforator | YY/T 1629.2-2018 | 2019-11-1 |
| Implants for surgery—Partial and total hip joint prostheses—Part 4:Determination of endurance properties and performance of stemmed femoral components | YY/T 0809.4-2018 | 2019-10-1 |
| Implants for surgery—Partial and total hip joint prostheses—Part 6:Endurance properties testing and performance requirements of neck region of stemmed femoral components | YY/T 0809.6-2018 | 2019-9-26 |
| Cutting tools for electric osseous tissue surgical equipment—Part 1:Burs | YY/T 1629.1-2018 | 2019-9-26 |
| Assessment of self-care abilities in daily life for persons with disability | GB/T 37103-2018 | 2019-7-1 |
| Standard specification for semi-Crystalline poly ( lactide) polymer and copolymer resin for surgical implants | YY/T 0661-2017 | 2018-10-1 |
| Implants for surgery-Measurements of open-circuit potential to assess corrosion behaviour of metallic implantable materials and medical devices over extended time periods | YY/T 1552-2017 | 2018-10-1 |
| Implants for surgery-Calcium phosphates-Part 3:Hydroxyapatite and beta-tricalcium phosphate bone substitutes | YY/T 1558.3-2017 | 2018-10-1 |
| General technique requirements for osteotome | YY/T 1141-2017 | 2018-10-1 |
| Implants for surgery--Ultra-high-molecular-weight polyethylene--Part 1: Powder form | GB/T 19701.1-2016 | 2018-7-1 |
| Implants for surgery-Ultra-high-molecular-weight polyethylene- Part 2:Moulded forms | GB/T 19701.2-2016 | 2018-7-1 |
| Tissue engineering medical device products--Terminology | YY/T 1445-2016 | 2018-6-1 |
| Implants osteosynthesis--Metallic bone screws | YY 0018-2016 | 2018-6-1 |
| Implants for osteosynthesis - Metallic bone plates | YY 0017-2016 | 2018-6-1 |
| Spinal implant—Standard test methods for occipital-cervical and occipital-cervical-thoracic implant constructs in a vertebrectomy model | YY/T 1560-2017 | 2018-4-1 |
| Tissue engineering medical device products—Terminology,classification and nomination of skin substitute | YY/T 1570-2017 | 2018-4-1 |
| Implants for surgery―Active implantable medical devices―Part 6: Particular requirements for active implantable medical devices intended to treat tachyarrhythmia(including implantable defibrillators) | YY 0989.6-2016 | 2018-1-1 |
| Implants for surgery―Metallic materials―Part 12:Wrought cobalt-chromium-molybdenum alloy | YY 0605.12-2016 | 2018-1-1 |
| Joint replacement implants―Knee joint prostheses | YY 0502-2016 | 2018-1-1 |
| Joint replacement implants - Hip joint prostheses | YY 0118-2016 | 2018-1-1 |
| Implants for surgery—Active implantable medical devices—Part 7:Particular requirements for cochlear implant systems | YY 0989.7-2017 | 2018-1-1 |
| Implants for surgery—Active implantable medical devices—Part 2: Cardiac pacemakers | GB 16174.2-2015 | 2017-7-1 |
| Spinal implants―Intervertebral body fusion devices | YY/T 1502-2016 | 2017-6-1 |
| Determination the content of impurity element in the implant for surgery ultra-high molecular weight polyethylene powder―Part 3:Determination of calcium by ICP-MS | YY/T 1507.3-2016 | 2017-6-1 |
| Implants for surgery―Test method for driving torque of metallic bone screws | YY/T 1506-2016 | 2017-6-1 |
| Implants for surgery―Test method for determining the axial pullout strength of metallic bone screws | YY/T 1504-2016 | 2017-6-1 |
| Implant for surgery―Test method for determining the self-tapping performance of metallic bone screws | YY/T 1505-2016 | 2017-6-1 |
| Implants for surgery―Test method for determining the bending fatigue properties of metallic bone plates | YY/T 1503-2016 | 2017-6-1 |
| Determination the content of impurity element in the implant for surgery ultra-igh molecular weight polyethylene powder―Part 4:Determination of aluminum by ICP-MS | YY/T 1507.4-2016 | 2017-6-1 |
| Determination the content of impurity element in the implant for surgery ultra-high molecular weight polyethylene powder―Part 2:Determination of chlorine by ion chromatography | YY/T 1507.2-2016 | 2017-6-1 |
| Implants for surgery―Metallic materials―Part 9:Wrought high nitrogen stainless steel | YY 0605.9-2015 | 2017-1-1 |
| Implants for surgery—Wear of total knee-joint prostheses—Part 2:Methods of measurement | YY/T 1426.2-2016 | 2017-1-1 |
| Wear of implant materials—Polymer and metal wear particles—Isolation and characterization | YY/T 0652-2016 | 2017-1-1 |
| Implants for surgery—In vitro evaluation for apatite-forming ability of implant materials | YY/T 1447-2016 | 2017-1-1 |
| Medical electrical equipment―Part 2:Particular requirements for the safety of external cardiac pacemakers with internal power source | YY 0945.2-2015 | 2017-1-1 |
| Electrical surgical equipment for osseous tissue | YY/T 0752-2016 | 2017-1-1 |
| Implants for surgery—Wear of total knee-joint prostheses—Part 1:Loading and displacement parameters for wear-testing machines with load control and corresponding environmental conditions for test | YY/T 1426.1-2016 | 2017-1-1 |
| Spinal implants—Relevant terms | YY/T 1428-2016 | 2017-1-1 |
| Coatings of surgical implants—Part 11:Tension testing method of calcium phosphate coating and metallic coatings | YY/T 0988.11-2016 | 2017-1-1 |
| Implants for surgery—Wear of total hip-joint prostheses—Part 1:Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test | YY/T 0651.1-2016 | 2017-1-1 |
| Implants for surgery—Acrylic resin cement—Flexural fatigue testing of acrylic resin cements used in orthopaedics | YY/T 1429-2016 | 2017-1-1 |
| ardiovascular implants - Cardiac valve prostheses - Part 3: Heart valve substitutes implanted by transcatheter techniques | YY/T 1449.3-2016 | 2017-1-1 |
| Implants for surgery—Medical-grade ultra-high molecular weight polyethylene yarns | YY/T 1431-2016 | 2017-1-1 |
| Implants for Surgery―Ceramic materials―Part 2:Composite materials based on a high purity alumina matrix with zirconia reinforcemen | YY/T 1294.2-2015 | 2016-1-1 |
| Implants for surgery―Bioglass and glass ceramic biomaterials | YY/T 0964-2014 | 2015-7-1 |
| Implants for surgery―Components for partial and total knee joint prostheses―Part 1:Classification, definitions and designation of dimensions | YY/T 0924.1-2014 | 2015-7-1 |
| Implants for surgery―Skeletal pins and wires―Part 2:Steinmann skeletal pins―Dimensions | YY/T 0345.2-2014 | 2015-7-1 |
| Spinal implants―Components used in the surgical fixation of the spinal skeletal system―Part 4:Metallic spinal rods | YY/T 0119.4-2014 | 2015-7-1 |
| Implants for surgery―Components for partial and total knee joint prostheses―Part 2:Articulating surfaces made of metal,ceramic and plastics materials | YY/T 0924.2-2014 | 2015-7-1 |
| Implants for surgery―Metallic materials―Unalloyed tantalum | YY/T 0966-2014 | 2015-7-1 |
| Standard guide for evaluating the static and fatigue properties of interconnection mechanisms and subassemblies used in spinal arthrodesis implants | YY/T 0961-2014 | 2015-7-1 |
| Implants for surgery―Partial and total hip joint prostheses―Part 10:Determination of resistance to static load of modular femoral heads | YY/T 0809.10-2014 | 2015-7-1 |
| Orthopaedic instruments―Drive connections―Part 1:Keys for use with screws with hexagon socket heads | YY/T 0957.1-2014 | 2015-7-1 |
| Implant for surgury―Staples with parallel legs for orthopaedic use―General requirements | YY/T 0956-2014 | 2015-7-1 |
| Spinal implants―Test methods for mechanical property of intervertebral body fusion devices | YY/T 0959-2014 | 2015-7-1 |
| Non-active surgical implants―Joint replacement implants―Specific requirements for hip-joint replacement implants | YY/T 0920-2014 | 2015-7-1 |
| Spinal implants―Components used in the surgical fixation of the spinal skeletal system―Part 3:Metallic spinal plates | YY/T 0119.3-2014 | 2015-7-1 |
| Implants for surgery―Skeletal pins and wires―Part 3:kirschner skeletal wires | YY/T 0345.3-2014 | 2015-7-1 |
| Spinal implants―Components used in the surgical fixation of the spinal skeletal system―Part 1:General requirements | YY/T 0119.1-2014 | 2015-7-1 |
| Joint replacement implants―Shoulder prostheses | YY/T 0963-2014 | 2015-7-1 |
| Spinal implants―Components used in the surgical fixation of the spinal skeletal system―Part 2:Metallic spinal screws | YY/T 0119.2-2014 | 2015-7-1 |
| External limb prostheses and external orthoses―Requirements and test methods | GB/T 30659-2014 | 2015-7-1 |
| Orthopaedic instruments―Drive connections―Part 2:Screwdrivers for single slot head screws,screws with cruciate slot and cross-recessed head screws | YY/T 0957.2-2014 | 2015-7-1 |
| Implants for neurosurgery―Preformed cranioplasty plates | YY/T 0928-2014 | 2015-7-1 |
| Prostheses and orthoses - Factors to be considered when specifying a prosthesis for a person who has had a lower limb amputation | GB/T 30658-2014 | 2015-7-1 |
| Prosthetics and orthotics - Vocabulary - Part 1:Normal gait | GB/T 30660.1-2014 | 2015-7-1 |
| Spinal implants―Components used in the surgical fixation of the spinal skeletal system―Part 5:Test method for measure the static and fatigue bending strength of metallic screws | YY/T 0119.5-2014 | 2015-7-1 |
| Orthopaedic drilling instruments―Part 1:Drill bits,taps and countersink cutters | YY/T 0958.1-2014 | 2015-7-1 |
| Non-active surgical implants―Joint replacement implants―Specific requirements for knee-joint replacement implants | YY/T 0919-2014 | 2015-7-1 |
| Implants for neurosurgery―Preformed cranioplasty plates that can be altered | YY/T 0917-2014 | 2015-7-1 |
| Prostheses and orthoses―Factors to be included when describing physical activity of a person who has had a lower limb amputation(s) or who has a deficiency of a lower limb segment(s) present at birth | GB/T 30657-2014 | 2015-7-1 |
| Spinal implants―Standard test method for measuring load induced subsidence of intervertebral body fusion device under static axial compression | YY/T 0960-2014 | 2015-7-1 |
| Prosthetics―Testing of ankle-foot devices and foot units―Requirements and test methods | GB/T 31181-2014 | 2015-1-1 |
| Implants for surgery—Intramedullary nailing systems—Part 1:Intramedullary nails with cloverleaf or V-shaped cross-section | YY/T 0019.1-2011 | 2013-6-1 |
| Implants for orthosynthesis—Metallic lockable intramedullary nail | YY/T 0591-2011 | 2013-6-1 |
| Implants for surgery—Skeletal pins and wires—Part 1:Material and mechanical requirements | YY/T 0345.1-2011 | 2013-6-1 |
| YY/T 0019.2-2011 | YY/T 0019.2-2011 | 2013-6-1 |
| Standard test method for in situ determination of network parameters of crosslinked ultra high molecular weight polyethylene(UHMWPE) | YY/T 0813-2010 | 2012-6-1 |
| Implants for surgery—Partial and total hip joint prostheses—Part 6:Determination of endurance properties of head and neck region of stemmed femoral components | YY/T 0809.6-2010 | 2012-6-1 |
| Implants for surgery—Partial and total hip joint prostheses—Part 2:Articulating surfaces made of metallic,ceramic and plastics materials | YY/T 0809.2-2010 | 2012-6-1 |
| Implants for surgery—Metallic implantable strands and cables | YY/T 0812-2010 | 2012-6-1 |
| Standard test method for measurement of enthalpy of fusion percent crystallinity and melting point of ultra-high-molecular weight polyethylene by means of differential scanning calorimetry | YY/T 0815-2010 | 2012-6-1 |
| Implants for surgery—Malleable wires for use as sutures and other surgical applications | YY/T 0816-2010 | 2012-6-1 |
| Standard guide for extensively irradiation—Crosslinked ultrahigh molecular weight polyethylene fabricated forms for surgical implant applications | YY/T 0811-2010 | 2012-6-1 |
| Implants for surgery—Partial and total hip joint prostheses—Part 8:Endurance performance of stemmed femoral components with application of torsion | YY/T 0809.8-2010 | 2012-6-1 |
| Implants for surgery—Total knee-joint prostheses—Part 1:Determination of endurance properties of knee tibial trays | YY/T 0810.1-2010 | 2012-6-1 |
| Implants for surgery—Partial and total hip joint prostheses—Part 4:Determination of endurance properties of stemmed femoral components | YY/T 0809.4-2010 | 2012-6-1 |
| Implants for surgery—Hydroxyapatite—Part 3:Chemical analysis and characterization of crystallinity and phase purity | GB 23101.3-2010 | 2011-8-1 |
| General technological requirements for non-active metallic surgical implants for osteosynthesis | YY 0341-2009 | 2011-6-1 |
| Implants for surgery - Metal intramedullary nailing systems - Part 3: Connection devices and reamer diameter measurements | YY/T 0727.3-2009 | 2010-12-1 |
| Implants for surgery - Metal intramedullary nailing systems - Part 1: Intramedullary nails | YY/T 0727.1-2009 | 2010-12-1 |
| Implants for surgery - Metal intramedullary nailing systems - Part 2: Locking components | YY/T 0727.2-2009 | 2010-12-1 |
| Instrumentation for use in association with non-active surgical implants—General requirements | YY/T 0726-2009 | 2010-12-1 |
| Electric surgical equipment for osseous tissue | YY/T 0752-2009 | 2010-12-1 |
| Implants for surgery—Usage of the terms “valgus” and “varus” in orthopaedic surgery | YY/T 0728-2009 | 2010-12-1 |
| Implants for osteosynthesis - Metallic bone plates | YY 0017-2008 | 2010-6-1 |
| Implants for osteosynthesis—Metallic bone screws | YY 0018-2008 | 2010-6-1 |
| Implants for surgery—Guidance on care and handling of orthopaedic implants | GB/T 24629-2009 | 2010-5-1 |
| Implants for surgery - Metallic materials - Wrought titanium -6aluminium-7niobium alloy | GB 23102-2008 | 2010-3-1 |
| Implants for surgery - Hydroxyapatite - Part 2: Coatings of hydroxyapatite | GB 23101.2-2008 | 2010-3-1 |
| Implants for surgery - Hydroxyapatite - Part 1: Ceramic hydroxyapatite | GB 23101.1-2008 | 2010-3-1 |
| Implants for surgery - Hydroxyapatite - Part 4: Determination of coating adhesion strength | GB 23101.4-2008 | 2010-3-1 |
| Test method for measuring output characteristics of the nerve and muscle stimulators | YY/T 0696-2008 | 2010-1-1 |
| Standard specification for beta-tricalcium phosphate for surgical implantation | YY/T 0683-2008 | 2010-1-1 |
| Bone scissor | YY/T 1135-2008 | 2010-1-1 |
| Standard test method for measuring intrinsic elastic recoil of balloon-expandable stents | YY/T 0694-2008 | 2010-1-1 |
| Implants for surgery - Minimum data sets for surgical implants | YY/T 0682-2008 | 2010-1-1 |
| Standard guide for characterization and presentation of the dimensional attributes of vascular stents | YY/T 0693-2008 | 2010-1-1 |
| Neurosurgical implants - Marking and packaging of implantable neural stimulators | YY/T 0684-2008 | 2010-1-1 |
| Neurosurgical implants—Self-closing intracranial aneurysm clips | YY/T 0685-2008 | 2010-1-1 |
| Standard test method for conducting cyclic potentiodynamic polarization measurements to determine the corrosion susceptibility of small lmplant devices | YY/T 0695-2008 | 2010-1-1 |
| Non-active surgical implants - Mammary implants - Particular requirements | YY 0647-2008 | 2009-12-1 |
| Implants for surgery—Ceramic materials based on high purity alumina | GB/T 22750-2008 | 2009-12-1 |
| Cardiovasular implants - Cardiac valve prostheses | GB 12279-2008 | 2009-12-1 |
| Standard test method for transformation temperature of nickel—Titanium alloys by thermal analysis | YY/T 0641-2008 | 2009-6-1 |
| Standard specification for virgin poly(L-lactic acid) resin for surgical implants | YY/T 0661-2008 | 2009-6-1 |
| Wear of implant materials—Polymer and metal wear particles—Isolation characterization and quantification | YY/T 0652-2008 | 2009-6-1 |
| Implant for surgery—Wear of total hip-joint prostheses—Part 1:Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test | YY/T 0651.1-2008 | 2009-6-1 |
| Implant for surgery - Wear of total hip-joint prostheses - Part 2: Methods of measurment | YY/T 0651.2-2008 | 2009-6-1 |
| Implants for surgery-Metal bone screws with asymmetrical thread and spherical under-surface-Mechanical requirements and test methods | YY/T 0662-2008 | 2009-6-1 |
| Standard Specification for Polyetheretherketone(PEEK) polymers for Surgical Implant Applications | YY/T 0660-2008 | 2009-6-1 |
| Implants for surgery - Metallic materials - Part 12: Wrought cobalt-chromium - Molybdenum alloy | YY 0605.12-2007 | 2008-2-1 |
| Implants for surgery-Metallic materials-Part 9:Wrought high nitrogen stainless steel | YY 0605.9-2007 | 2008-2-1 |
| Implants for surgery-Metallic materials-Part 8: Wrought cobalt-nickel-chromium-molybdenum-tungsten-iron alloy | YY/T 0605.8-2007 | 2008-1-1 |
| Implants for surgery—Metallic materials—Part 7: Forgeable and cold-formed cobalt-chromium-nickel-molybdenum-iron alloy | YY/T 0605.7-2007 | 2008-1-1 |
| Implants for surgery - Metallic materials - Part 5: Wrought cobalt-chromium-tungsten-nickel alloy | YY/T 0605.5-2007 | 2008-1-1 |
| Implants for surgery - Metallic materials - Part 6: Wrought cobalt-nickel-chromium - Molybdenum alloy | YY/T 0605.6-2007 | 2008-1-1 |
| Rongeur | YY/T 1127-2006 | 2007-5-1 |
| Implants for surgery -- Metallic clip | YY/T 0079-2006 | 2007-5-1 |
| Implants for osteosynthesis - Metallic lockable Intramedullary nail | YY 0591-2005 | 2006-12-1 |
| Implants for surgery-Forgings, castings for bone joint prostheses-ZTi6Al4V titanium alloy castings | YY 0117.2-2005 | 2006-12-1 |
| Hip joint prostheses | YY 0118-2005 | 2006-12-1 |
| General technique requirements for orthopaedics clamp(scissor) | YY 1122-2005 | 2006-12-1 |
| Implants for surgery-Forgings, castings for bone joint prostheses Cobalt chromium molybdenum alloy castings | YY 0117.3-2005 | 2006-12-1 |
| Knee joint prostheses | YY 0502-2005 | 2006-12-1 |
| General technique requirements for orthopaedics saw | YY 1137-2005 | 2006-12-1 |
| Implants for surgery - Forgings, castings for bone joint prostheses - Ti6Al4V titanium alloy forgings | YY 0117.1-2005 | 2006-12-1 |
| Implants for surgery - Ultra-high molecular weight polyethylene part 1:powder form | GB/T 19701.1-2005 | 2005-12-1 |
| Implants for surgery Ultra-high molecular weight polyethylene--Part 2:Moulded forms | GB/T 19701.2-2005 | 2005-12-1 |
| Hygienic standard for edible vegetable oil | GB 2716-2005 | 2005-10-1 |
| Implants for surgery—Acrylic resin cements | YY 0459-2003 | 2004-1-1 |
| Implants for osteosynthesis - Metallic intramedullary nailing systems | YY 0019-2002 | 2003-4-1 |
| Implants for osteoxynethesis--Metallic bone plates | YY 0017-2002 | 2003-4-1 |
| Implants for osteosynthesis - Metal bone pins | YY 0345-2002 | 2003-4-1 |
| Implants for osteosynthesis--Metallic bone screws | YY 0018-2002 | 2003-4-1 |
| Implants for osteosynethesis - Metal correctional stick | YY 0120-2002 | 2003-4-1 |
| General technological requirements for non-active metallic surgery implants of osteosynthesis | YY 0341-2002 | 2003-4-1 |
| Modular units of the endoskeletal cosmetic arm | MZ/T 007-2000 | 2000-7-1 |
| Forceps for othopaedy | YY/T 0295.2-1997 | 1998-1-1 |
| Wrought TC4 titanium alloy for surgical implants | GB 13810-1992 | 1993-6-1 |
| Lower limb orthosis with uprights | MZ 003-1993 | 1993-5-1 |
| Body - Powered upper limb prosthesis | MZ 002-1993 | 1993-5-1 |
| Electric arm | MZ 001-1993 | 1993-5-1 |
| Synthetic resin blow knee prostheses | GB/T 13461-1992 | 1992-1-2 |
| The general technological conditions of surgical metal implant | GB 12417-1990 | 1991-2-1 |
| Non-active surgical implants - Osteosynthesis and joint replacement implants - Part 2: Particular requirements for joint replacement implants | GB/T 12417.2-2008 | 1991-2-1 |
| Non-active surgical implants - Osteosynthesis and joint replacement implants - Part 1: Particular requirements for osteosynthesis implants | GB/T 12417.1-2008 | 1991-2-1 |
| Cardiac valve prostheses general technical specification | GB 12279-1990 | 1990-1-2 |
| Pistol-type hand bone drill | YY 91133-1999 | 1988-11-1 |
| General technical conditions for osteotomes | YY/T 91141-1999 | 1986-1-1 |
| Methods of test for cutting performance of chisels - Osteotomes Gouges | YY 91073-1999 | 1985-5-1 |
| Osteotomes | YY 91071-1999 | 1985-5-1 |
| Gouges | YY 91072-1999 | 1985-5-1 |
