Title |
Standard No. |
Implemented On |
Safety of machinery―Safety requirements for interlocking devices―Part 3:Trapped key interlocking devices and systems | GB/T 41108.3-2021 | 2022-7-1 |
Safety of machinery—Implementation criteria for safeguarding | GB/T 30574-2021 | 2022-7-1 |
Safety of machinery―Safety requirements for interlocking devices―Part 2:Interlocking devices with guard-locking | GB/T 41108.2-2021 | 2022-7-1 |
Safety of machinery―Guideline for the design of safety control systems | GB/T 41118-2021 | 2022-7-1 |
Safety of machinery―Safety requirements for interlocking devices―Part 1:Direct opening position switches | GB/T 41108.1-2021 | 2022-7-1 |
Safety of machinery—Emergency stop function—Principles for design | GB/T 16754-2021 | 2021-12-1 |
Safety of machinery—Minimum gaps to avoid crushing of parts of the human body | GB/T 12265-2021 | 2021-12-1 |
Safety of machinery—Permanent means of access to machinery—Part 1:Choice of fixed means and general requirements of access | GB/T 17888.1-2020 | 2021-6-1 |
Safety of machinery—Permanent means of access to machinery—Part 3:Stairs,stepladders and guard-rails | GB/T 17888.3-2020 | 2021-6-1 |
Safety of machinery—Permanent means of access to machinery—Part 2:Working platforms and walkways | GB/T 17888.2-2020 | 2021-6-1 |
Safety of machinery—Permanent means of access to machinery—Part 4:Fixed ladders | GB/T 17888.4-2020 | 2021-6-1 |
Electrical safety of machinery—Electrical equipment of machines—Part 7: Requirements of industrial robot | GB/T 5226.7-2020 | 2021-1-1 |
Safety of machinery—Reduction of risks to health resulting from hazardous substances emitted by machinery—Part 1: Principles and specifications for machinery manufacturers | GB/T 18569.1-2020 | 2020-12-1 |
Safety of machinery—Reduction of risks to health resulting from hazardous substances emitted by machinery—Part 2: Methodology leading to verification procedures | GB/T 18569.2-2020 | 2020-12-1 |
Electrical safety of machinery—Electrical equipment of machines—Part 34: Requirements for machine tools | GB/T 5226.34-2020 | 2020-11-1 |
Electrical equipment and system of industrial robot -- Part 3: Requirements for AC servo motor | GB/T 37414.3-2020 | 2020-11-1 |
Electrical equipment and system of industrial robot -- Part 2: Requirements for AC servo driver device | GB/T 37414.2-2020 | 2020-11-1 |
Safety of machinery -- Guidelines for safety upgrading of machinery | GB/T 38272-2019 | 2020-7-1 |
Safety of machinery -- Risk assessment for ignition hazard | GB/T 38367-2019 | 2020-7-1 |
Safety of machinery—Technical requirements for safety relays | GB/T 38225-2019 | 2020-5-1 |
Ladders—Part 5: Telescopic ladders | GB/T 17889.5-2019 | 2020-3-1 |
Ladders—Part 6: Mobile ladders with platform | GB/T 17889.6-2019 | 2020-1-1 |
Electrical safety of machinery—Electrical equipment of machines—Part 1:General requirements | GB/T 5226.1-2019 | 2020-1-1 |
Industrial Robot Electrical Equipment and Systems Part1: Requirements for Controller | GB/T 37414.1-2019 | 2020-1-1 |
Safety of machinery—Fire prevention and protection | GB/T 23819-2018 | 2019-7-1 |
Safety of machinery—Guards—General requirements for the design and construction of fixed and movable guards | GB/T 8196-2018 | 2019-7-1 |
Safety of machinery-Safety-related parts of control systems-Part 1: General principles for design | GB/T 16855.1-2018 | 2019-7-1 |
Safety of machinery--Implementation of ergonomic principles in risk assessment and risk reduction | GB/T 36954-2018 | 2019-7-1 |
Safety of machinery—Evaluation of fault masking serial connection of interlocking devices with potential free contacts | GB/T 37157-2018 | 2019-7-1 |
Stage machinery—Specification for acceptance test | GB/T 36727-2018 | 2019-4-1 |
Mechanical equipment on stages—Fire curtain | GB 36726-2018 | 2019-4-1 |
Safety of machinery—General safety requirements for production equipment | GB/T 35076-2018 | 2018-12-1 |
Safety of machinery—Relationship of type-B and type-C standards to GB/T 15706 | GB/T 35080-2018 | 2018-12-1 |
Safety of machinery—Local exhaust ventilation system—Safety requirements | GB/T 35077-2018 | 2018-12-1 |
Safety of machinery—Relationship of GB/T 16855.1 to GB/T 15706 | GB/T 35081-2018 | 2018-12-1 |
Safety of machinery—Interlocking devices associated with guards—Principles for design and selection | GB/T 18831-2017 | 2018-7-1 |
Electrical safety of machinery―Electrical equipment of machines―Part 33:Requirements for semiconductor fabrication equipment | GB/T 5226.33-2017 | 2018-5-1 |
Guidelines for the preparation of emergency response plan forspecial equipment accident | GB/T 33942-2017 | 2018-2-1 |
Mobile detachable working towers. Safety technical criterion | GB/T 33944-2017 | 2018-2-1 |
Safety of machinery―Guide for safety design and lean manufacturing | GB/T 33940-2017 | 2018-2-1 |
Safety of machinery -- Control methods of hazardous energy -- Lockout/Tagout | GB/T 33579-2017 | 2017-12-1 |
Safety of machinery―Pressure-sensitive protective devices―Part 2:General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars | GB/T 17454.2-2017 | 2017-12-1 |
Safety of machinery―Pressure-sensitive protective devices―Part 3:General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices | GB/T 17454.3-2017 | 2017-12-1 |
Safety of machinery―Pressure-sensitive protective devices―Part 1:General principles for design and testing of pressure-sensitive mats and pressure sensitive floors | GB/T 17454.1-2017 | 2017-12-1 |
Electrical safety of machinery―Electro-sensitive protective equipment―Part 4: Particular requirements for equipment using vision based protective devices (VBPD) | GB/T 19436.4-2016 | 2016-9-1 |
Safety of machinery―Rules for drafting and presentation of safety standards | GB/T 16755-2015 | 2016-7-1 |
Safety of machinery-Guidelines for the understanding and use of safety of machinery standards | GB/T 20850-2014 | 2015-10-1 |
Safety of machinery - Safety specification for the design of fixed ladders | GB/T 31254-2014 | 2015-7-1 |
Electrical Safety of Machinery - Electrical Equipment of Machines - Part 6: Requirements for Construction Machinery | GB 5226.6-2014 | 2015-6-29 |
Guideline for Establishing Safety Technical Regulation of Special Equipment | TSG 01-2014 | 2015-4-1 |
Safety of Machinery - Implementation Criteria for Safeguarding | GB/T 30574-2014 | 2014-12-1 |
Safety of machinery-Terms | GB/T 30174-2013 | 2014-10-1 |
Safety of machinery—Guidance on the application of GB/T 16855.1and GB 28526 in the design of safety-related control systems | GB/T 30175-2013 | 2014-10-1 |
Electrical safety of machinery—Electro-sensitive protective equipment—Part 1:General requirements and tests | GB/T 19436.1-2013 | 2014-2-1 |
Electrical safety of machinery—Electro-sensitive protective equipment—Part 2:Particular requirements for equipment using active opto-electronic protective devices(AOPDs) | GB/T 19436.2-2013 | 2014-2-1 |
Numerical controller of industrial machines—Part 1:General requirements | GB/T 29771.1-2013 | 2014-2-1 |
Numerical control system of industrial machines—Part 1:General requirments | GB/T 29482.1-2013 | 2013-7-1 |
Electrical safety of machinery—Application of protective equipment to detect the presence of persons | GB/T 29483-2013 | 2013-7-1 |
Safety of machinery - Integral lighting of machines | GB/T 28780-2012 | 2013-3-1 |
Safety of machinery — General principles for design - Risk assessment and risk reduction | GB/T 15706-2012 | 2013-3-1 |
Safety of machinery ― Positioning of safeguards with respect to the approach speeds of parts of the human body | GB/T 19876-2012 | 2013-3-1 |
Ladders—Part 2:Requirements,test,marking | GB/T 17889.2-2012 | 2012-12-1 |
Safety of machinery—Evaluation of the emission of airborne hazardous substances—Part 7:Test bench method for the measurement of the pollutant concentration parameter | GB/T 25749.7-2012 | 2012-12-1 |
Safety of machinery—Evaluation of the emission of airborne hazardous substances—Part 6:Test bench method for the measurement of the separation efficiency by mass of air cleaning systems with ducted outlet | GB/T 25749.6-2012 | 2012-12-1 |
Safety of machinery—Evaluation of the emission of airborne hazardous substances—Part 5:Test bench method for the measurement of the separation efficiency by mass of air cleaning systems with unducted outlet | GB/T 25749.5-2012 | 2012-12-1 |
Safety of machinery—Evaluation of the emission of airborne hazardous substances—Part 8:Room method for the measurement of the pollutant concentration parameter | GB/T 25749.8-2012 | 2012-12-1 |
Ladders—Part 4:Single or multiple hinge-joint ladders | GB/T 17889.4-2012 | 2012-12-1 |
Ladders—Part 1:Terms,types,functional sizes | GB/T 17889.1-2012 | 2012-12-1 |
Safety of machinery—Evaluation of the emission of airborne hazardous substances—Part 9:Decontamination index | GB/T 25749.9-2012 | 2012-12-1 |
Ladders—Part 3:User instructions | GB/T 17889.3-2012 | 2012-12-1 |
Electrical equipment of industrical machines—Electromagnetic compatibility for the construction machinery with internal electrical power supply | GB/T 28554-2012 | 2012-11-1 |
Electrical safety of machinery - Indication,marking and actuation - Part 3: Requirements for the location and operation of actuators | GB 18209.3-2010 | 2011-12-1 |
Electrical safety of machinery—Indication,marking and actuation—Part 1:Requirements for visual,acoustic and tactile signals | GB 18209.1-2010 | 2011-12-1 |
Electrical safety of machinery―Indication marking and actuation―Part 2:Requirements for marking | GB/T 18209.2-2010 | 2011-12-1 |
Electrical safety of machinery―Indication,marking and actuation―Part 1:Requirements for visual,acoustic and tactile signals | GB/T 18209.1-2010 | 2011-12-1 |
Electrical safety of machinery—Indication marking and actuation—Part 2:Requirements for marking | GB 18209.2-2010 | 2011-12-1 |
Electrical safety of machinery―Indication,marking and actuation―Part 3:Requirements for the location and operation of actuators | GB/T 18209.3-2010 | 2011-12-1 |
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 1: Selection of test methods | GB/T 25749.1-2010 | 2011-10-1 |
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 3: Test bench method for the measurement of the emission rate of a given pollutant | GB/T 25749.3-2010 | 2011-10-1 |
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4: Tracer method for the measurement of the capture efficiency of an exhaust system | GB/T 25749.4-2010 | 2011-10-1 |
Safety of machinery—Assessment and reduction of risks arising from radiation emitted by machinery—Part 2:Radiation emission measurement procedure | GB/T 26118.2-2010 | 2011-10-1 |
Safety of machinery—Assessment and reduction of risks arising from radiation emitted by machinery—Part 1:General principles | GB/T 26118.1-2010 | 2011-10-1 |
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant | GB/T 25749.2-2010 | 2011-10-1 |
Safety of machinery—Assessment and reduction of risks arising from radiation emitted by machinery—Part 3:Reduction of radiation by attenuation or screening | GB/T 26118.3-2010 | 2011-10-1 |
Safety of machinery—Interlocking devices associated with guards—Principles for design and selection | GB/T 18831-2010 | 2010-12-31 |
Electrical Safety of Machinery - Electrical Equipment of Machines - Part 1: General Requirements | GB 5226.1-2008 | 2010-2-1 |
Electrical equipment of industrial machines—Test specifications for voltage dips,short interruptions immunity | GB/T 22841-2008 | 2010-2-1 |
Electrical equipment of industrial machines - Electromagnetic compatibility - Emission limits for machine tools | GB 23712-2009 | 2010-2-1 |
Electrical equipment of industrial machines - Electromagnetic compatibility - Emission limits | GB 23313-2009 | 2010-2-1 |
Safety of machinery—Fire prevention and protection | GB 23819-2009 | 2009-12-1 |
Safety of machinery—Safety distances to prevent hazard zones being reached by upper and lower limbs | GB 23821-2009 | 2009-12-1 |
Safety of machinery—Lubricants with incidental product contact—Hygiene requirements | GB 23820-2009 | 2009-12-1 |
Safety of machinery―Fire prevention and protection | GB/T 23819-2009 | 2009-12-1 |
Safety of machinery―Safety distances to prevent hazard zones being reached by upper and lower limbs | GB/T 23821-2009 | 2009-12-1 |
Electrical equipment of industrial machines—Electrical fast transient/burst immunity test specifications | GB/T 24111-2009 | 2009-11-1 |
Electrical equipment of industrial machines - Electromagnetic compatibility - Immunity requirements for machine tools | GB/T 22663-2008 | 2009-11-1 |
Electrical equipment of industrial machines—Electrostatic discharge immunity test specifications | GB/T 24112-2009 | 2009-11-1 |
Electrical equipment of industrial machines - Test specifications for surge immunity | GB/T 22840-2008 | 2009-9-1 |
Safety of machinery - Rules for drafting and presentation of safety standards | GB/T 16755-2008 | 2009-7-1 |
Safety of machinery - Risk assessment - Part 2: Practical guidance and examples of methods | GB/T 16856.2-2008 | 2009-7-1 |
Electrical safety of machinery - Electro-sensitive protective equipment - Part 3: Particular requirements for Active Opto-electronic Protective Devices responsive to Diffuse Reflection(AOPDDR) | GB 19436.3-2008 | 2009-6-1 |
Safety of machinery - Emergency stop - Principles for design | GB 16754-2008 | 2009-4-1 |
Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design | GB/T 16855.1-2008 | 2009-4-1 |
Safety of machinery - Risk assessment - Part 1: Principles | GB/T 16856.1-2008 | 2009-4-1 |
Safety of machinery - Permanent means of access to machinery - Part 1: Choice of a fixed means of access between two levels | GB 17888.1-2008 | 2008-10-1 |
Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways | GB/T 17888.2-2008 | 2008-10-1 |
Safety of machinery - Permanent means of access to machinery - Part 3: Stairs stepladders and guard-rails | GB 17888.3-2008 | 2008-10-1 |
Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders | GB 17888.4-2008 | 2008-10-1 |
Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways | GB 17888.2-2008 | 2008-10-1 |
Safety of machinery - Pressure-sensitive protective devices - Part 3: General principles for design and testing of pressure-sensitive bumpers plates wires and similar devices | GB/T 17454.3-2008 | 2008-10-1 |
Safety of machinery - Permanent means of access to machinery - Part 3: Stairs stepladders and guard-rails | GB/T 17888.3-2008 | 2008-10-1 |
Safety of machinery - Pressure-sensitive protective devices - Part 2: General principles for the design and testing of pressure-sensitive edges and pressure-sensitive bars | GB/T 17454.2-2008 | 2008-10-1 |
Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders | GB/T 17888.4-2008 | 2008-10-1 |
Safety of machinery - Permanent means of access to machinery - Part 1: Choice of a fixed means of access between two levels | GB/T 17888.1-2008 | 2008-10-1 |
Safety of machinery - Pressure - sensitive protective devices - Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors | GB/T 17454.1-2008 | 2008-10-1 |
Electrical equipment of industrial machines—Electromagnetic compatibility—— | GB/T 21067-2007 | 2008-3-1 |
Safety of machinery- Safety-related parts of control systems- Part 2: Validation | GB/T 16855.2-2007 | 2007-9-1 |
Safety of machinery- Basic concepts general principles for design- Part 1: Basic terminology methodology | GB/T 15706.1-2007 | 2007-9-1 |
Safety of machinery-Basic concepts general principles for design-Part 2:Technical principles | GB/T 15706.2-2007 | 2007-9-1 |
Safety of machinery-Guidelines for the understanding and use of safety of machinery standards | GB/T 20850-2007 | 2007-9-1 |
Level switch | JB/T 7340-2007 | 2007-9-1 |
Safety requirements for the use of mechanical press | AQ 7001-2007 | 2007-4-1 |
Safety of machinery—Electrical equipment of machines—Part 31:Particular safety and EMC requirements for sewing machines,units and systems | GB 5226.4-2005 | 2006-9-1 |
Safety of machinery - Electrical equipment of machines - Part 11: Requirements for HV equipment for voltages above 1000V a.c. or 1500V d.c. and not exceeding 36kV | GB 5226.3-2005 | 2006-9-1 |
Safety of machinery--Hygiene requirements for the design of machinery | GB 19891-2005 | 2006-7-1 |
Guidelines for environmental protection at pressworking shops | JB/T 6056-2005 | 2005-9-1 |
Safety of machinery--Prevention of unexpected start-up | GB/T 19670-2005 | 2005-7-1 |
Safety fo machinery--Safety-related parts of control systems--Part100:Guidelines for the use and aplication of GB/T 16855.1 | GB/T 16855.100-2005 | 2005-7-1 |
Safety of machinery - Two-hand control device - Functional aspects and design principles | GB/T 19671-2005 | 2005-7-1 |
Electrical safety of machinery - Electro-sensitive protective equipmemt - Part 1: General requirements and test | GB/T 19436.1-2004 | 2004-6-1 |
Safety of machinery-Indication,marking and actuation-Part 3:Requirements for the locatoin and operation of actuators | GB 18209.3-2002 | 2003-10-1 |
Safety of machinery--Interlocking devices associated with guards--Principles for design and selection | GB/T 18831-2002 | 2003-4-1 |
Ergonomic design for the safety of machinery--Part 2:Principles for determining the dimensions required for openings for access of parts of the body into machinery | GB/T 18717.2-2002 | 2002-12-1 |
Ergonomic design for the safety of machinery--Part 1:Principles for determining the dimensions required for openings for whole-body access into machinery | GB/T 18717.1-2002 | 2002-12-1 |
Ergonomic design for the safety of machinery--Part 3:Anthropometric data | GB/T 18717.3-2002 | 2002-12-1 |
Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 2:Methodology leading to verification procedures | GB/T 18569.2-2001 | 2002-8-1 |
Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers | GB/T 18569.1-2001 | 2002-8-1 |
Safety of machinery--Indication,marking and actuation--Part 1:Requirements for visual,auditory and tactile signals | GB 18209.1-2000 | 2001-7-1 |
Safety of machinery--Indication,marking and actuation--Part 2:Requirements for marking | GB 18209.2-2000 | 2001-7-1 |
Safety of machinery --Safety distances to prevent danger zones being reached by the lower limbs | GB 12265.2-2000 | 2000-12-1 |
Safety of machinery Permanent means of access to machines and industrial plants Part 1:Choice of a fixed means of access between two levels | GB 17888.1-1999 | 2000-10-1 |
Safety of machinery --Permanent means of access to machines and industrial plants --Part 2:Working platforms and gangways | GB 17888.2-1999 | 2000-10-1 |
Safety of machinery -Permanent means of access to machines and industrial plants -Part 3:Stairways ,stepladders and guard-rails | GB 17888.3-1999 | 2000-10-1 |
Safety of machinery --Permanent means of access to machines and industrial plants --Part 4: fixed ladders | GB 17888.4-1999 | 2000-10-1 |
Safety of machinery--Temperatures of touchable surfaces--Ergonomics data to establish temperature limit values for hot surfaces | GB/T 18153-2000 | 2000-1-2 |
Safety of machinery--Pressure sensitive protective device--Part 1: General principles for the design and testing of pressure sensing mats and pressure sensing floors | GB/T 17454.1-1998 | 1999-7-1 |
Safety of machinery--Minimum gaps to avoid crushing of parts of the human body | GB 12265.3-1997 | 1998-2-1 |
Safety of machinery--safety distances to prevent danger zones being reached by the uppar limbs | GB 12265.1-1997 | 1998-2-1 |
Safety of machinery--Minimum gaps to avoid crushing of parts of the human body | GB/T 12265.3-1997 | 1998-2-1 |
Safety of machinery―Emergency stop Principles for design | GB 16754-1997 | 1997-9-1 |
Safety of machinery―Rules for the drafting and presentation of safety STANDARDs | GB/T 16755-1997 | 1997-9-1 |
Sawing machines―Safeguarding specification | GB 16454-1996 | 1997-2-1 |
Safety of machinery-Basic concept, general principles for design-Part 1: Basic terminology, methodology | GB/T 15706.1-1995 | 1996-6-1 |
Safety of machinery-Basic concepts, general principles for design Part 2: Technical principles and specifications | GB/T 15706.2-1995 | 1996-6-1 |
Safety Monitoring of Lifting Machinery - Content and Method | LD 67-1994 | 1995-1-1 |
Limits on Harmful Substance in Air at Heat Treatment Workshop | JB/T 5073-1991 | 1992-7-1 |
Dust control code for foundry | GB 8959-1988 | 1989-1-1 |
General rules to safety production of pressing shop | GB 8176-1987 | 1988-1-1 |
Classification and specification for bag filters | GB/T 6719-1986 | 1987-5-1 |