| Title |
Standard No. |
Implemented On |
| Secondary utilization of lead-acid batteries Part 3:Restoration technical specifications of batteries | T/CEC 131.3-2016 | |
| Radio frequency identification(RFID) for lead-acid battery electronic tags technical specification | GB/T 38333-2019 | 2020-7-1 |
| Technical specification of auxiliary material for lead-acid batteries | GB/T 38279-2019 | 2020-7-1 |
| Container and lid for lead-acid storage batteries | GB/T 23754-2019 | 2020-7-1 |
| Technical specification for recycling waste lead acid battery | GB/T 37281-2019 | 2019-10-1 |
| Lead-acid traction batteries—Part 1:Technical conditions | GB/T 7403.1-2018 | 2019-7-1 |
| Lead-acid traction batteries—Part 2:Product types and specifications | GB/T 7403.2-2018 | 2019-7-1 |
| Valve-regulated lead-acid batteries for moped―Part 1:Technical conditions | GB/T 22199.1-2017 | 2018-7-1 |
| Valve-regulated lead-acid batteries for moped―Part 2:Kinds of products and specifications | GB/T 22199.2-2017 | 2018-7-1 |
| Plate for lead-acid battery | GB/T 23636-2017 | 2017-12-1 |
| Technical specification of operation of environment protection facilities for lead-acid battery manufacturers―Part 1:Lead dust and fume treatment system | GB/T 32068.1-2015 | 2016-11-1 |
| Lead-acid batteries used for electric road vehicles―Part 2:Kinds of products and specifications | GB/T 32620.2-2016 | 2016-9-1 |
| Civil lead-acid battery technical code for safety | GB/T 32504-2016 | 2016-9-1 |
| Lead-acid batteries used for electric road vehicles―Part 1:Technical condition | GB/T 32620.1-2016 | 2016-9-1 |
| General purpose valve-regulated lead-acid batteries―Part 1:Technical conditions | GB/T 19639.1-2014 | 2015-7-1 |
| The Technical conditions of lead-acid batteries for start-stop | T/CEEIA 228-2015 | 2015-2-1 |
| Lead-acid batteries for stationary valve-regulated―Part 1: Technical requirements | GB/T 19638.1-2014 | 2015-1-22 |
| Lead-acid batteries for stationary valve-regulated—Part 2: Kinds of products and specification | GB/T 19639.2-2014 | 2015-1-22 |
| Lead-acid batteries for stationary valve-regulated—Part 2: Kinds of products and specification | GB/T 19638.2-2014 | 2015-1-22 |
| Nickel-metal hydride barreries used for energy storage | DB43/T 918-2014 | 2014-9-19 |
| Preparation method of sample for determination of mercury,cadmium,lead in secondary battery | DB43/T 920-2014 | 2014-9-19 |
| Reliability test methods for electric vehicles power battery system | DB43/T 919-2014 | 2014-9-19 |
| Lead-acid battery for locomotives and rolling stock—Part 1:Valve-regulate lead acid for electric and subway locomotives | GB/T 7404.1-2013 | 2013-12-2 |
| Lead-acid battery for locomotives and rolling stock—Part 2:Valve regulated lead-acid for diesel locomotives | GB/T 7404.2-2013 | 2013-12-2 |
| Lead-acid starter batteries—Part 2:Dimensions of batteries and dimensions and marking of terminals | GB/T 5008.2-2013 | 2013-7-1 |
| Lead-acid starter batteries—Part 1:Technical conditions and methods of test | GB/T 5008.1-2013 | 2013-7-1 |
| Electrolyte for vented nickel-cadmium cells | GB/T 18270-2012 | 2013-6-1 |
| Valve-regulated lead-acid battery safety valve —Part 4：Rubber facing ring, rubber loop | JB/T 11340.4-2012 | 2012-11-1 |
| Valve-regulated lead-acid battery safetyvalve — Part 3：Rubber cap, valve core | JB/T 11340.3-2012 | 2012-11-1 |
| Miniature valve-regulated lead-acid battery | JB/T 11338-2012 | 2012-11-1 |
| Operating technical specifications for VRLA batteries forusing in electric-assisted vehicles | JB/T 11339-2012 | 2012-11-1 |
| Valve-regulated lead-acid battery safetyvalve — Part 5：Microporous acid filter | JB/T 11340.5-2012 | 2012-11-1 |
| Valve-regulated lead-acid battery safety valve —Part 1：Safety valve | JB/T 11340.1-2012 | 2012-11-1 |
| Name, Type Organization and Naming Convention of Lead-acid Battery | JB/T 2599-2012 | 2012-11-1 |
| Separators for lead-acid batteries | GB/T 28535-2012 | 2012-11-1 |
| Valve-regulated lead-acid battery safety valve — Part 2：Plastic shell | JB/T 11340.2-2012 | 2012-11-1 |
| General specification for alkaline nickel-iron rechargeable batteries | GB/T 12725-2011 | 2012-7-1 |
| Container and cover sealing for lead-acid battery —Technical specifications | JB/T 11256-2011 | 2012-4-1 |
| Determination method for cadmium in lead-acid battery | JB/T 11236-2011 | 2012-4-1 |
| Stationary lead-acid batteries - Vented types - Part 1: Technical conditions | GB/T 13337.1-2011 | 2011-12-1 |
| Stationary lead-acid batteries - Vented types - Part 2: Capacity specifications and size | GB/T 13337.2-2011 | 2011-12-1 |
| General requirement of lithium-ion phosphate battery module | JB/T 11140-2011 | 2011-8-1 |
| General requirement of lithium-ion manganese oxide battery module | JB/T 11139-2011 | 2011-8-1 |
| General requirement for module case of lithium-ion battery | JB/T 11141-2011 | 2011-8-1 |
| Interface and communication protocol of lithum-ion battery assembly | JB/T 11138-2011 | 2011-8-1 |
| Special explosion-prood lead-acid batteries for coal mine power source device | JB/T 8200-2010 | 2010-7-1 |
| Water for lead-acid batteries | JB/T 10053-2010 | 2010-7-1 |
| Eletroyte for lead-acid storage batteries | JB/T 10052-2010 | 2010-7-1 |
| Glass fiber tubes for lead-acid batteries | JB/T 9654-2010 | 2010-7-1 |
| Polyester fiber gauntlets for lead-acid batteries | JB/T 10054-2010 | 2010-7-1 |
| Primary batteries - Part 4: Safety of lithium batteries | GB 8897.4-2008 | 2010-3-1 |
| Lead-acid batteries used for electric road vehicles | GB/T 18332.1-2009 | 2009-11-1 |
| Plate for lead-acid battery | GB/T 23636-2009 | 2009-11-1 |
| Container for lead acid storage batteries | GB/T 23754-2009 | 2009-11-1 |
| Lead-acid storage batteries used for energy storage | GB/T 22473-2008 | 2009-10-1 |
| Sealed lead-acid battery used for moped | GB/T 22199-2008 | 2009-4-1 |
| Lead-Acid Battery Used For Passenger Trains | GB/T 13281-2008 | 2009-3-1 |
| Lead-acid traction batteries—Part 1:Technical conditions | GB/T 7403.1-2008 | 2008-9-1 |
| Lead-acid traction batteries - Part 2: Product types and specifications | GB/T 7403.2-2008 | 2008-9-1 |
| Microporous polyethylene separators for lead-acid batteries | JB/T 7630.5-2008 | 2008-7-1 |
| Sintered polyvinyl chloride separators for lead-acid batteries | JB/T 7630.3-2008 | 2008-7-1 |
| Glass micro-fiber for lead-acid batteries | JB/T 7630.1-2008 | 2008-7-1 |
| Microporous rubber separators for lead-acid batteries | JB/T 7630.2-2008 | 2008-7-1 |
| Melt-spray polypropylene separators for lead-acid batteries | JB/T 7630.4-2008 | 2008-7-1 |
| Product classification of small-sized valve-regulated lead-acid batteries | GB/T 19639.2-2007 | 2007-8-1 |
| Lead-acid battery plate | JB/T 10679-2006 | 2007-7-1 |
| Lead-acid batteries for motorcycles | JB/T 4282-2007 | 2007-7-1 |
| General specification li-ion rechargeable cell | SJ 20941-2005 | 2006-6-1 |
| Lead-Acid Starter Batteries - Technical Conditions | GB/T 5008.1-2005 | 2005-8-1 |
| Lead-acid batteries for stationary valve-regulated | GB/T 19638.2-2005 | 2005-8-1 |
| Technical conditions of small-sized valve-regulated lead-acid batteries | GB/T 19639.1-2005 | 2005-8-1 |
| Safety inspection of import and export secondary cells and batteries - Part 1 : General | SN/T 1414.1-2004 | 2004-12-1 |
| Small-sized valve-regulated lead-acid batteries Part 2:Technical conditions | JB/T 6457.2-2004 | 2004-6-1 |
| Primary batteries--Part 4:Safety of lithium batteries | GB 8897.4-2002 | 2003-3-1 |
| Sealed Lead-Acid Battery Used for Electric Moped | JB/T 10262-2001 | 2001-10-1 |
| Lead-acid batteries for electric road vehicles | GB/T 18332.1-2001 | 2001-9-1 |
| Zinc-air batteries for electric road vehicles | GB/Z 18333.2-2001 | 2001-9-1 |
| Nickel-metal hydride batteries for electric road vehicles | GB/T 18332.2-2001 | 2001-9-1 |
| Lithium-ion batteries for electric road vehicles | GB/Z 18333.1-2001 | 2001-9-1 |
| Container for lead acid storage batteries | JB/T 3076-1999 | 2000-1-1 |
| Package of Lead. Acid Storage Battery | JB/T 3941-1999 | 2000-1-1 |
| Water For Lead Acid Storage Batteries | JB/T 10053-1999 | 2000-1-1 |
| Zinc-manganese dry batteries of R03,R1,R6,R14 and R20 Alkaline zinc-manganese dry batteries of LR03,LR1,LR6,LR14 and LR20 | GB/T 7112-1998 | 1999-6-1 |
| Microglass rubber separator for lead acid storage batteries | JB/T 7630.2-1998 | 1998-11-1 |
| Melt-blown polyvinylchloride separator for lead acid storage batteries | JB/T 7630.4-1998 | 1998-11-1 |
| DC Power Supply Device with Cadmium Nickel Storage Battery of Medium Multiplying Factor for Electric Railway | TB/T 2892-1998 | 1998-9-1 |
| Specifications for ordering valve-controlled sealed battery of plumbic acid | DL/T 637-1997 | 1998-6-1 |
| Lead-acid traction batteries | GB/T 7403.1-1996 | 1997-1-1 |
| Rules for the inspection of lead-acid storage batteries for export | SN/T 0361-1995 | 1995-10-1 |
| General specification for alkaline nickle-metal hydride cylindrical sealed rechargeable batteries | GB/T 15100-1994 | 1995-1-1 |
| 0 | JB/T 2599-1993 | 1993-10-1 |
| Lead-acid batteries used for passenger trains | GB 13281-1991 | 1992-8-1 |
| Stationary acidspray-proof lead-acid batteries-Technical conditions | GB 13337.1-1991 | 1992-6-1 |
| Stationary acidspray-proof lead-acid batteries-Capacity specifications and size | GB/T 13337.2-1991 | 1992-6-1 |
| Lead-acid starter batteries--Technical conditions | GB/T 5008.1-1991 | 1992-6-1 |
| Terminology of (secondary) cell or battery | GB 2900.11-1988 | 1989-7-1 |
| Lead-acid batteries for diesel locomotives | GB/T 7404-1987 | 1987-11-1 |
