CNCA-C11-07:2014 Implementation Rules for Compulsory Product Certification-external lighting and light-signalling devices for motor vehicles (English Version)
The Rules was formulated based on the safety risk and certification risk of external lighting and light-signalling devices for motor vehicles. It specifies the basic principles and requirements for implementation of compulsory product certification of the external lighting and light-signalling devices for motor vehicles.
The Rules shall be used together with the general implementation rules issued by the Certification and Accreditation Administration of the Republic of China (CNCA), e.g., "Implementation Rules for Compulsory Product Certification - Production Enterprise Classification Management, Certification Mode Selection and Determination", "Implementation Rules for Compulsory Product Certification - Utilization of Testing Resources and Other Certification Results of Production Enterprises" and "Implementation Rules for Compulsory Product Certification - General Requirements for Factory Inspection".
The certification authority shall formulate the certification implementation regulations in accordance with the requirements of general implementation rules and the Rules, and shall implement these regulations together with the general implementation rules and the Rules.
The production enterprises shall ensure that their certified products always meet the requirements of certification and applicable standards.
1 Application Scope
The Rules is applicable to the external lighting and light-signalling devices for motor vehicles of Categories M, N, O and L.
The adjustment of application scope caused by the changes of factors such as laws, regulations, relevant product standards, technologies, and industrial policies shall be subject to the announcement issued by CNCA.
2 Terminologies and Definitions
External lighting and light-signalling devices: the devices designed to light roads or send light signal to other road users (hereinafter referred to as "lighting fittings").
The definitions of various types of lighting fittings are detailed in GB 4785 and GB 18100.
3 Reference Standards for Certification
See Attachment 4.
In principle, the latest editions of above standards issued by the administrative department of national standardization shall be implemented. Where other editions of these standards are required, they shall be subject to the CNCA announcements which are applicable to relevant standard requirements.
4 Certification Mode
Basic certification mode for implementing compulsory certification of the external lighting and light-signalling devices for motor vehicles is as follow:
Type test + initial factory inspection + post-certification supervision;
The post-certification supervision in the above-mentioned basic certification mode refers to one of the three kinds of modes: post-certification follow-up inspection, sampling testing or inspection on production site, and market sampling testing/inspection.
0 Introduction 1 Application Scope 2 Terminologies and Definitions 3 Reference Standards for Certification 4 Certification Mode 5 Certification Unit Division 6 Certification Entrustment 6.1 Application and Acceptance of Certification Entrustment 6.2 Application Information 6.3 Implementation Arrangement 7 Certification Implementation 7.1 Type Test 7.2 Initial Factory inspection 7.3 Certification Evaluation and Decision 7.4 Time Limit for Certification 7.5 Maintenance Parts for Off-production Vehicle Type 8 Post-certification Supervision 8.1 Post-certification Follow-up Inspection 8.2 Sampling Testing or Inspection on Production Site 8.3 Market Sampling Testing/Inspection 8.4 Frequency and Time of Post-certification Supervision 8.5 Record of Post-certification Supervision 8.6 Evaluation on Post-certification Supervision Results 9 Certificate 9.1 Certificate Maintenance 9.2 Certificate Contents 9.3 Certificate Changes 9.4 Cancellation, Suspension and Revocation of Certificate 9.5 Certificate Application 10 Certification Mark 10.1 Pattern of Allowable Mark 10.2 Requirements for Application 11 Charges 12 Certification Responsibility 13 Certification Implementation Regulations Attachment 1: Description to External Lighting and Light-signalling Devices for Motor Vehicles Attachment 2: Production Conformity Requirements Attachment 3: Certification Implementation of After-sale Maintenance Spare Parts for Off-production Vehicle Types Attachment 4: Certification Standards
CNCA-C11-07:2014 Implementation Rules for Compulsory Product Certification-external lighting and light-signalling devices for motor vehicles (English Version)
Standard No.
CNCA-C11-07:2014
Status
valid
Language
English
File Format
PDF
Word Count
8000 words
Price(USD)
240.0
Implemented on
2015-1-1
Delivery
via email in 1 business day
Detail of CNCA-C11-07:2014
Standard No.
CNCA-C11-07:2014
English Name
Implementation Rules for Compulsory Product Certification-external lighting and light-signalling devices for motor vehicles
Chinese Name
强制性产品认证实施规则 机动车外部照明及光信号装置
Chinese Classification
Professional Classification
CN
ICS Classification
Issued by
Issued on
2014-08-21
Implemented on
2015-1-1
Status
valid
Superseded by
Superseded on
Abolished on
Superseding
Language
English
File Format
PDF
Word Count
8000 words
Price(USD)
240.0
Keywords
CNCA-C11-07:2014, , CNCA-C11-07:2014, CNCA,
Introduction of CNCA-C11-07:2014
Introduction
The Rules was formulated based on the safety risk and certification risk of external lighting and light-signalling devices for motor vehicles. It specifies the basic principles and requirements for implementation of compulsory product certification of the external lighting and light-signalling devices for motor vehicles.
The Rules shall be used together with the general implementation rules issued by the Certification and Accreditation Administration of the Republic of China (CNCA), e.g., "Implementation Rules for Compulsory Product Certification - Production Enterprise Classification Management, Certification Mode Selection and Determination", "Implementation Rules for Compulsory Product Certification - Utilization of Testing Resources and Other Certification Results of Production Enterprises" and "Implementation Rules for Compulsory Product Certification - General Requirements for Factory Inspection".
The certification authority shall formulate the certification implementation regulations in accordance with the requirements of general implementation rules and the Rules, and shall implement these regulations together with the general implementation rules and the Rules.
The production enterprises shall ensure that their certified products always meet the requirements of certification and applicable standards.
1 Application Scope
The Rules is applicable to the external lighting and light-signalling devices for motor vehicles of Categories M, N, O and L.
The adjustment of application scope caused by the changes of factors such as laws, regulations, relevant product standards, technologies, and industrial policies shall be subject to the announcement issued by CNCA.
2 Terminologies and Definitions
External lighting and light-signalling devices: the devices designed to light roads or send light signal to other road users (hereinafter referred to as "lighting fittings").
The definitions of various types of lighting fittings are detailed in GB 4785 and GB 18100.
3 Reference Standards for Certification
See Attachment 4.
In principle, the latest editions of above standards issued by the administrative department of national standardization shall be implemented. Where other editions of these standards are required, they shall be subject to the CNCA announcements which are applicable to relevant standard requirements.
4 Certification Mode
Basic certification mode for implementing compulsory certification of the external lighting and light-signalling devices for motor vehicles is as follow:
Type test + initial factory inspection + post-certification supervision;
The post-certification supervision in the above-mentioned basic certification mode refers to one of the three kinds of modes: post-certification follow-up inspection, sampling testing or inspection on production site, and market sampling testing/inspection.
Contents of CNCA-C11-07:2014
0 Introduction
1 Application Scope
2 Terminologies and Definitions
3 Reference Standards for Certification
4 Certification Mode
5 Certification Unit Division
6 Certification Entrustment
6.1 Application and Acceptance of Certification Entrustment
6.2 Application Information
6.3 Implementation Arrangement
7 Certification Implementation
7.1 Type Test
7.2 Initial Factory inspection
7.3 Certification Evaluation and Decision
7.4 Time Limit for Certification
7.5 Maintenance Parts for Off-production Vehicle Type
8 Post-certification Supervision
8.1 Post-certification Follow-up Inspection
8.2 Sampling Testing or Inspection on Production Site
8.3 Market Sampling Testing/Inspection
8.4 Frequency and Time of Post-certification Supervision
8.5 Record of Post-certification Supervision
8.6 Evaluation on Post-certification Supervision Results
9 Certificate
9.1 Certificate Maintenance
9.2 Certificate Contents
9.3 Certificate Changes
9.4 Cancellation, Suspension and Revocation of Certificate
9.5 Certificate Application
10 Certification Mark
10.1 Pattern of Allowable Mark
10.2 Requirements for Application
11 Charges
12 Certification Responsibility
13 Certification Implementation Regulations
Attachment 1: Description to External Lighting and Light-signalling Devices for Motor Vehicles
Attachment 2: Production Conformity Requirements
Attachment 3: Certification Implementation of After-sale Maintenance Spare Parts for Off-production Vehicle Types
Attachment 4: Certification Standards
