7.2 Sampling testing or inspection on production site 7
7.3 Market sampling testing or inspection 7
7.4 Frequency and time of post-certification supervision 7
7.5 Record of post-certification supervision 8
7.6 Evaluation of post-certification supervision results 8
8 Certification certificate 8
8.1 Maintenance of certification certificate 8
8.2 Contents and use of certification certificate 8
8.3 Change/extension of certification certificate 8
8.4 Cancellation, suspension and revocation of certification certificate 9
9 Certification mark 9
9.1 Pattern of mark 9
9.2 Use requirements 9
10 Charges 10
11 Responsibilities for certification 10
12 Detailed implementation rules for certification 10
Annex Requirements for CoP inspection 12
0 Introduction
This document is developed based on the safety risks and certification risks of tyres for motor vehicles, and it stipulates the basic principles and requirements for implementation of compulsory product certification for tyres for motor vehicles.
This document shall be used together with general implementation rules including Implementation rules for compulsory product certification - Manufacturing enterprise classification management, certification mode selection and determination, Implementation rules for compulsory product certification - Utilization of testing resources and other certification results of manufacturing enterprises, and Implementation rules for compulsory product certification - General requirements for factory inspection issued by CNCA.
The certification body shall, in accordance with the requirements of general implementation rules and this document, develop detailed implementation rules for certification for use together with general implementation rules and this document.
The applicant shall be able to bear corresponding quality and legal responsibilities related to its products applied for certification, including recall and warranty.
The manufacturing enterprise and the importer shall ensure the continued compliance of the certified products they produce or import with the requirements of the certification and applicable standards.
The compulsory product certification activities in ODM mode shall also meet the requirements of Supplementary provisions concerning ODM mode in the implementation rules for compulsory product certification.
1 Application scope
This document is applicable to new pneumatic tyres for motor vehicles, including passenger car tyres and truck tyres, motorcycle tyres, which are originally designed for motor vehicles of Categories M, N, O and L (see GB/T 15089 for the classification and definition of vehicles).
This document is not applicable to retreaded tyres and tyres specially designed for racing.
Any adjustment to the application scope caused by any change(s) in laws and regulations, related product standards, technologies, industrial polices and other factors shall be subject to the announcement issued by CNCA.
2 Certification standards
GB 9743 Passenger car tyres, GB 9744 Truck tyres and GB 518 Motorcycle tyres.
In principle, the latest editions of the certification standards issued by the national administrative department in charge of standardization shall apply. Any addition of new applicable standards or use of other editions, where necessary, shall be subject to the announcement issued by CNCA stating that corresponding standards are applicable.
3 Certification mode
The basic modes for compulsory certification of tyres for motor vehicles are as follows:
Enterprise quality assurance capacity and product consistency inspection + type test + post-certification supervision;
Note: The enterprise quality assurance capacity and product consistency inspection of tyre products for motor vehicles shall be carried out in the manner of Conformity of Production (CoP) inspection.
The post-certification supervision above refers to the post-certification follow-up inspection, sampling testing or inspection on production site, market sampling testing or inspection, or their combinations.
The certification body shall implement the classified management on the manufacturing enterprises in accordance with the requirements of the Implementation rules for compulsory product certification - Manufacturing enterprise classification management, certification mode selection and determination and add sampling testing or inspection on production site, market sampling testing or inspection and other relevant elements, as appropriate, based on the basic certification modes in combination with the classified management results, so as to determine the applicable certification mode for the applicant.
4 Division of certification unit
In principle, tyres of the same category [Note 1], the same structure [Note 2] and the same series [Note 3], produced by the same producer (manufacturer) and the same manufacturing enterprise (workplace) are divided into one certification unit.
The applicant proposes the certification application according to the unit division principle.
Note 1: Category: passenger car tyres, truck tyres, and motorcycle tyres.
Note 2: Structure: radial tyres, diagonal tyres, and bias-belted tyres.
Note 3: Series: product series specified in GB/T 2978 Size designation, dimensions, inflation pressure and load capacity for passenger car tyres, GB/T 2977 Size designation, dimensions, inflation pressure and load capacity for truck tyres, GB/T 2983 Series of motorcycle tyres, and/or relevant technical documents of the industry.
0 Introduction 1 Application scope 2 Certification standards 3 Certification mode 4 Division of certification unit 5 Certification application 5.1 Submission and acceptance of certification application 5.2 Application documents 5.3 Implementation arrangement 6 Implementation of certification 6.1 Enterprise quality assurance capacity and product consistency (CoP) inspection 6.2 Type test 6.3 Certification evaluation and decision 6.4 Certification time limit 7 Post-certification supervision 7.1 Post-certification follow-up inspection 7.2 Sampling testing or inspection on production site 7.3 Market sampling testing or inspection 7.4 Frequency and time of post-certification supervision 7.5 Record of post-certification supervision 7.6 Evaluation of post-certification supervision results 8 Certification certificate 8.1 Maintenance of certification certificate 8.2 Contents and use of certification certificate 8.3 Change/extension of certification certificate 8.4 Cancellation, suspension and revocation of certification certificate 9 Certification mark 9.1 Pattern of mark 9.2 Use requirements 10 Charges 11 Responsibilities for certification 12 Detailed implementation rules for certification Annex Requirements for CoP inspection
No.: CNCA-C12-01:2024
Implementation rules for compulsory product certification - Tyres for motor vehicles
强制性产品认证实施规则 机动车辆轮胎
(English translation)
Issue date: 2024-12-30 Implementation date: 2025-01-01
Issued by the Certification and Accreditation Administration of the People's Republic of China
Contents
0 Introduction 1
1 Application scope 1
2 Certification standards 1
3 Certification mode 2
4 Division of certification unit 2
5 Certification application 3
5.1 Submission and acceptance of certification application 3
5.2 Application documents 3
5.3 Implementation arrangement 3
6 Implementation of certification 3
6.1 Enterprise quality assurance capacity and product consistency (CoP) inspection 3
6.2 Type test 4
6.3 Certification evaluation and decision 5
6.4 Certification time limit 6
7 Post-certification supervision 6
7.1 Post-certification follow-up inspection 6
7.2 Sampling testing or inspection on production site 7
7.3 Market sampling testing or inspection 7
7.4 Frequency and time of post-certification supervision 7
7.5 Record of post-certification supervision 8
7.6 Evaluation of post-certification supervision results 8
8 Certification certificate 8
8.1 Maintenance of certification certificate 8
8.2 Contents and use of certification certificate 8
8.3 Change/extension of certification certificate 8
8.4 Cancellation, suspension and revocation of certification certificate 9
9 Certification mark 9
9.1 Pattern of mark 9
9.2 Use requirements 9
10 Charges 10
11 Responsibilities for certification 10
12 Detailed implementation rules for certification 10
Annex Requirements for CoP inspection 12
0 Introduction
This document is developed based on the safety risks and certification risks of tyres for motor vehicles, and it stipulates the basic principles and requirements for implementation of compulsory product certification for tyres for motor vehicles.
This document shall be used together with general implementation rules including Implementation rules for compulsory product certification - Manufacturing enterprise classification management, certification mode selection and determination, Implementation rules for compulsory product certification - Utilization of testing resources and other certification results of manufacturing enterprises, and Implementation rules for compulsory product certification - General requirements for factory inspection issued by CNCA.
The certification body shall, in accordance with the requirements of general implementation rules and this document, develop detailed implementation rules for certification for use together with general implementation rules and this document.
The applicant shall be able to bear corresponding quality and legal responsibilities related to its products applied for certification, including recall and warranty.
The manufacturing enterprise and the importer shall ensure the continued compliance of the certified products they produce or import with the requirements of the certification and applicable standards.
The compulsory product certification activities in ODM mode shall also meet the requirements of Supplementary provisions concerning ODM mode in the implementation rules for compulsory product certification.
1 Application scope
This document is applicable to new pneumatic tyres for motor vehicles, including passenger car tyres and truck tyres, motorcycle tyres, which are originally designed for motor vehicles of Categories M, N, O and L (see GB/T 15089 for the classification and definition of vehicles).
This document is not applicable to retreaded tyres and tyres specially designed for racing.
Any adjustment to the application scope caused by any change(s) in laws and regulations, related product standards, technologies, industrial polices and other factors shall be subject to the announcement issued by CNCA.
2 Certification standards
GB 9743 Passenger car tyres, GB 9744 Truck tyres and GB 518 Motorcycle tyres.
In principle, the latest editions of the certification standards issued by the national administrative department in charge of standardization shall apply. Any addition of new applicable standards or use of other editions, where necessary, shall be subject to the announcement issued by CNCA stating that corresponding standards are applicable.
3 Certification mode
The basic modes for compulsory certification of tyres for motor vehicles are as follows:
Enterprise quality assurance capacity and product consistency inspection + type test + post-certification supervision;
Note: The enterprise quality assurance capacity and product consistency inspection of tyre products for motor vehicles shall be carried out in the manner of Conformity of Production (CoP) inspection.
The post-certification supervision above refers to the post-certification follow-up inspection, sampling testing or inspection on production site, market sampling testing or inspection, or their combinations.
The certification body shall implement the classified management on the manufacturing enterprises in accordance with the requirements of the Implementation rules for compulsory product certification - Manufacturing enterprise classification management, certification mode selection and determination and add sampling testing or inspection on production site, market sampling testing or inspection and other relevant elements, as appropriate, based on the basic certification modes in combination with the classified management results, so as to determine the applicable certification mode for the applicant.
4 Division of certification unit
In principle, tyres of the same category [Note 1], the same structure [Note 2] and the same series [Note 3], produced by the same producer (manufacturer) and the same manufacturing enterprise (workplace) are divided into one certification unit.
The applicant proposes the certification application according to the unit division principle.
Note 1: Category: passenger car tyres, truck tyres, and motorcycle tyres.
Note 2: Structure: radial tyres, diagonal tyres, and bias-belted tyres.
Note 3: Series: product series specified in GB/T 2978 Size designation, dimensions, inflation pressure and load capacity for passenger car tyres, GB/T 2977 Size designation, dimensions, inflation pressure and load capacity for truck tyres, GB/T 2983 Series of motorcycle tyres, and/or relevant technical documents of the industry.
Contents of CNCA-C12-01-2024
0 Introduction
1 Application scope
2 Certification standards
3 Certification mode
4 Division of certification unit
5 Certification application
5.1 Submission and acceptance of certification application
5.2 Application documents
5.3 Implementation arrangement
6 Implementation of certification
6.1 Enterprise quality assurance capacity and product consistency (CoP) inspection
6.2 Type test
6.3 Certification evaluation and decision
6.4 Certification time limit
7 Post-certification supervision
7.1 Post-certification follow-up inspection
7.2 Sampling testing or inspection on production site
7.3 Market sampling testing or inspection
7.4 Frequency and time of post-certification supervision
7.5 Record of post-certification supervision
7.6 Evaluation of post-certification supervision results
8 Certification certificate
8.1 Maintenance of certification certificate
8.2 Contents and use of certification certificate
8.3 Change/extension of certification certificate
8.4 Cancellation, suspension and revocation of certification certificate
9 Certification mark
9.1 Pattern of mark
9.2 Use requirements
10 Charges
11 Responsibilities for certification
12 Detailed implementation rules for certification
Annex Requirements for CoP inspection
