1 Scope
This standard specifies the security requirements for commercial premises of banking financial institutions (hereinafter referred to as bank commercial premises) and is the reference of the construction, approval and acceptance, routine inspection and security assessment of security facilities in bank commercial premises.
This standard is applicable to bank commercial premises and the commercial premises of other financial institutions may also refer to the provisions of this standard.
2 Normative References
The following documents for the application of this document are essential. For dated references, only the edition cited applies. For undated references, the latest edition of the normative document (including any amendments) applies.
GB 1499.2 Steel for the Reinforcement of Concrete - Part 2: Hot Rolled Ribbed Bars
GB 10409-2001 Burglary Resistant Safes
GB/T 16676-2010 Specification of Alarm and Monitoring Network System for Bank Security and Protection
GB 17565-2007 General Specification for Burglary Resistant Safety Door
GB/T 28181 Security and Protection Video Monitoring Network System - Technical Specification for Information Transport, Switch and Control
GB 50198 Technical Code for Regulation of Civil Closed Circuit Monitoring TV System
GB 50348 Technical Code for Engineering of Security and Protection System
GB 50394 Code of Design for Intrusion Alarm Systems Engineering
GB 50395 Code of Design for Video Monitoring System
GB 50396 Code of Design for Access Control Systems Engineering
GA/T 73-2015 Thief Resistant Machine Locks
GA/T 75 Procedure and Requirements for Security Protection Projects
GA/T 143-1996 General Technical Requirements for Coffer Door
GA 165-1997 Bullet Resisting Glazing
GA 576 General Technical Conditions for Anti-tail Interlock Safety Door
GA 745 Regulations of Security and Protection for Bank Self-service Equipment and Self-service Bank
GA 844-2009 General Specifications of Forced Entry Resistant Glass
GA 858 Security Requirements for Bank Vaults
3 Terms and Definitions
For the purposes of this document, the terms and definitions specified in GA 745 and GA 858 and the following ones apply.
3.1
Bank commercial premises
Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 Security Requirements
Appendix A (Normative) Configuration Requirements of Security Facilities in Bank Commercial Premises
Appendix B (Normative) Counter Body Inspection and Acceptance Requirements
GA 38-2015, GA/T 38-2015, GAT 38-2015, GA38-2015, GA 38, GA38, GA/T38-2015, GA/T 38, GA/T38, GAT38-2015, GAT 38, GAT38
Introduction of GA 38-2015
1 Scope
This standard specifies the security requirements for commercial premises of banking financial institutions (hereinafter referred to as bank commercial premises) and is the reference of the construction, approval and acceptance, routine inspection and security assessment of security facilities in bank commercial premises.
This standard is applicable to bank commercial premises and the commercial premises of other financial institutions may also refer to the provisions of this standard.
2 Normative References
The following documents for the application of this document are essential. For dated references, only the edition cited applies. For undated references, the latest edition of the normative document (including any amendments) applies.
GB 1499.2 Steel for the Reinforcement of Concrete - Part 2: Hot Rolled Ribbed Bars
GB 10409-2001 Burglary Resistant Safes
GB/T 16676-2010 Specification of Alarm and Monitoring Network System for Bank Security and Protection
GB 17565-2007 General Specification for Burglary Resistant Safety Door
GB/T 28181 Security and Protection Video Monitoring Network System - Technical Specification for Information Transport, Switch and Control
GB 50198 Technical Code for Regulation of Civil Closed Circuit Monitoring TV System
GB 50348 Technical Code for Engineering of Security and Protection System
GB 50394 Code of Design for Intrusion Alarm Systems Engineering
GB 50395 Code of Design for Video Monitoring System
GB 50396 Code of Design for Access Control Systems Engineering
GA/T 73-2015 Thief Resistant Machine Locks
GA/T 75 Procedure and Requirements for Security Protection Projects
GA/T 143-1996 General Technical Requirements for Coffer Door
GA 165-1997 Bullet Resisting Glazing
GA 576 General Technical Conditions for Anti-tail Interlock Safety Door
GA 745 Regulations of Security and Protection for Bank Self-service Equipment and Self-service Bank
GA 844-2009 General Specifications of Forced Entry Resistant Glass
GA 858 Security Requirements for Bank Vaults
3 Terms and Definitions
For the purposes of this document, the terms and definitions specified in GA 745 and GA 858 and the following ones apply.
3.1
Bank commercial premises
Contents of GA 38-2015
Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 Security Requirements
Appendix A (Normative) Configuration Requirements of Security Facilities in Bank Commercial Premises
Appendix B (Normative) Counter Body Inspection and Acceptance Requirements