Detail of GA 450-2013

Introduction of GA 450-2013

1 Scope This Standard specifies technical specifications, test methods, test rules, as well as marking, packaging, transportation and storage of desktop readers of resident ID card. This Standard is applicable to desktop readers of resident ID card (hereinafter referred to as reader). 2 Normative References The following referenced documents are indispensable for the application of this Document. For dated references, only the dated versions are applicable to this Standard. For undated references, the latest edition of the normative document (including all the amendments) is applicable to this Standard. GB/T 191 Packaging-Pictorial Marking for Handling of Goods GB/T 2421.1-2008 Environmental Testing - General and Guidance GB/T 2423 1-2008 Environmental testing - Part 2: Test methods - Tests A: Cold GB/T 2423 2-2008 Environmental Testing - Part 2: Test Methods - Tests B: Dry Heat GB/T 2423.3-2006 Environmental Testing For Electric And Electronic Products - Part 2: Testing Method Test Cab: Damp Heat Steady State GB/T 2423.5-1995 Environmental Testing for Electric and Electronic Products Part 2: Test Methods Test Ea and Guidance: Shock GB/T 2423 6-1995 Environmental Testing for Electric and Electronic Products - Part 2: Test methods - Test Eb and Guidance: Bump GB/T 2423.8-1995 Environmental Testing for Electric and Electronic Products - Part 2: Test Methods - Test Ed: Free Fall GB/T 2423.10-2008 Environmental Testing for Electric and Electronic Products - Part 2: Tests Methods - Test Fc: Vibration (Sinusoidal) GB 4943 1-2011 Information Technology Equipment—Safety - Part 1: General Requirements GB/T 5080.7-1986 Equipment Reliability Testing - Compliance Test Plans for Failure Rate and Mean Time between Failures Assuming Constant Failure Rate GB/T 5271.14-2008 Information Technology - Vocabulary Part 14: Reliability，Maintainability and Availability GB 9254-2008 Information Technology Equipment-Radio Disturbance Characteristics-Limits and Methods of Measurement GB/T 14916-2006 Identification Card - Physical Characteristics GB/T 17626. 2-2006 Electromagnetic Compatibility (EMC) - Testing and Measurement Techniques-Electrostatic Discharge Immunity Test GB/T 17626.3-2006 Electromagnetic Compatibility - Testing and Measurement Techniques-Radiated, Radio-Frequency, Electromagnetic Field Immunity Test GB/T 17626.4-2008 Electromagnetic Compatibility (EMC) - Testing and Measurement Techniques - Electrical Fast Transient/Burst Immunity Test GB/T 17626.5-2008 Electromagnetic Compatibility - Testing and Measurement Techniques - Surge Immunity Test GB/T 17626.6-2008 Electromagnetic Compatibility - Testing nd Measurement Techniques - Immunity to Conducted Disturbances Induced by Radio - Frequency Fields GB/T 17626.8-2006 Electromagetic Compatibility - Testing and Measurement Techniques - Power Frequency Magnetic Field Immunity Test GB/T 17626.11-2008 Electromagnetic Compatibility - Testing and Measurement Techniques - Voltage Dips, Short Interruptions and Voltage Variations Immunity Tests GA 449 Terms of Resident Identity Card ISO/IEC 14443-2 Identification Cards - Contactless Integrated Circuit(s) Cards- Proximity Cards- Part 2 - Radio Frequency Power and Signal Interface ISO/IEC 14443-3 Identification Cards -Contactless integrated circuit(s) Cards - Proximity cards - Part 3 Initialization and Anti-collision 3 Terms, Definitions and Abbreviations 3.1 Terms and Definitions For the purposes of this Standard, the following terms and definitions defined in GA 449 apply. 3.1.1 Desktop readers of the resident ID card

Contents of GA 450-2013

Foreword I 1 Scope 1 2 Normative References 1 3 Terms, Definitions and Abbreviations 2 4 Technical Requirements 3 5 Test Methods 6 6 Inspection Rules 13 7 Marking, Packaging, Transportation and Storage 14 Appendix A (Normative) Test Devices for Desktop Readers of the Resident ID Card 16 Appendix B (Normative) Function Inspection Program for Desktop Readers of the Resident ID Card 26