GB 10827.1-2014 ndustrial trucks—Safety requirements and verification—Part 1:Self-propelled industrial trucks, other than driverless trucks,variable-reach trucks and burden-carrier trucks (English Version)
ndustrial trucks—Safety requirements and verification—Part 1:Self-propelled industrial trucks, other than driverless trucks,variable-reach trucks and burden-carrier trucks
This part of GB 10827 gives safety requirements and the means for their verification for the following types of self-propelled industrial trucks (hereafter referred to as trucks), as defined in ISO 5053:
a) Industrial counterbalanced trucks;
b) Reach trucks with retractable mast or retractable fork arm carriage;
c) Straddle trucks;
d) Pallet-stacking trucks;
e) High-lift platform trucks;
f) Trucks with elevating operator position up to 1200 mm;
g) Side-loading trucks (one side only);
h) Lateral-stacking trucks (both sides), and lateral- and front-stacking trucks;
i) Pallet trucks;
j) Bidirectional and multidirectional trucks;
k) Tractors with a drawbar pull up to and including 20 000 N;
l) Rough-terrain counterbalanced trucks;
m) Industrial trucks powered by battery, diesel, gasoline or LPG (liquefied petroleum gas).
Note 1: Trucks powered by CNG (compressed natural gas) are not dealt with. It is intended that CNG and other power sources be addressed in future revisions of this part.
For trucks with an elevating operator position of more than 1 200 mm and/or trucks designed to travel with an elevated load of more than 1 200 mm, this part is intended to be used in conjunction with ISO 3691-3.
Note 2: ISO 3691-3 is not applicable to counterbalanced fork lift trucks or trucks intended for container handling.
Note 3: Some low-level order pickers with an elevating operator's position up to and including 1200 mm lift height can be equipped with an additional lifting device to lift the load to a maximum lift height of 1800 mm.
This part is not applicable to self-propelled variable-reach trucks, driverless trucks or burden carriers, which are covered in ISO 3691-2, ISO 3691-4 and ISO 3691-6, respectively.
It is not applicable to industrial trucks operating in severe conditions (e.g. extreme climates, freezer applications, hazardous environments), where special precautions can be necessary.
This part deals with all significant hazards, hazardous situations or hazardous events, as listed in Annex B, with the exception of the following, relevant to the applicable machines when used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.
It does not establish requirements for hazards that can occur:
——during construction;
——when handling suspended loads that can swing freely;
——when using trucks on public roads;
——when operating in potentially explosive atmospheres;
——when using trucks in very narrow aisles with clearance of less than 500 mm to the racks;
——arising from a non-ergonomic body attitude when driving sit-on trucks, load trailing;
——during travelling with unladen trucks having a rated capacity of more than 10000kg, due to visibility concerns;
——due to overload.
Note 4: For the purposes of this part, fork arms, load platforms and integrated attachments are considered to be parts of the industrial truck. Attachments mounted on the load carrier or on the fork arms which are removable by the user are not considered to be part of the industrial truck. Requirements for attachments are given in the appropriate clauses.
Foreword I
Introduction III
1 Scope
2 Normative References
3 Terms and Definitions
4 Safety Requirements and/or Protective Measures
5 Verification of Safety Requirements and/or Protective Measures
6 Information for Use
Annex A (Normative) Determination of Driving Direction and Rated Capacity
Annex B (Informative) List of Significant Hazards
References
GB 10827.1-2014 ndustrial trucks—Safety requirements and verification—Part 1:Self-propelled industrial trucks, other than driverless trucks,variable-reach trucks and burden-carrier trucks (English Version)
Standard No.
GB 10827.1-2014
Status
superseded
Language
English
File Format
PDF
Word Count
16000 words
Price(USD)
140.0
Implemented on
2014-12-1
Delivery
via email in 1 business day
Detail of GB 10827.1-2014
Standard No.
GB 10827.1-2014
English Name
ndustrial trucks—Safety requirements and verification—Part 1:Self-propelled industrial trucks, other than driverless trucks,variable-reach trucks and burden-carrier trucks
This part of GB 10827 gives safety requirements and the means for their verification for the following types of self-propelled industrial trucks (hereafter referred to as trucks), as defined in ISO 5053:
a) Industrial counterbalanced trucks;
b) Reach trucks with retractable mast or retractable fork arm carriage;
c) Straddle trucks;
d) Pallet-stacking trucks;
e) High-lift platform trucks;
f) Trucks with elevating operator position up to 1200 mm;
g) Side-loading trucks (one side only);
h) Lateral-stacking trucks (both sides), and lateral- and front-stacking trucks;
i) Pallet trucks;
j) Bidirectional and multidirectional trucks;
k) Tractors with a drawbar pull up to and including 20 000 N;
l) Rough-terrain counterbalanced trucks;
m) Industrial trucks powered by battery, diesel, gasoline or LPG (liquefied petroleum gas).
Note 1: Trucks powered by CNG (compressed natural gas) are not dealt with. It is intended that CNG and other power sources be addressed in future revisions of this part.
For trucks with an elevating operator position of more than 1 200 mm and/or trucks designed to travel with an elevated load of more than 1 200 mm, this part is intended to be used in conjunction with ISO 3691-3.
Note 2: ISO 3691-3 is not applicable to counterbalanced fork lift trucks or trucks intended for container handling.
Note 3: Some low-level order pickers with an elevating operator's position up to and including 1200 mm lift height can be equipped with an additional lifting device to lift the load to a maximum lift height of 1800 mm.
This part is not applicable to self-propelled variable-reach trucks, driverless trucks or burden carriers, which are covered in ISO 3691-2, ISO 3691-4 and ISO 3691-6, respectively.
It is not applicable to industrial trucks operating in severe conditions (e.g. extreme climates, freezer applications, hazardous environments), where special precautions can be necessary.
This part deals with all significant hazards, hazardous situations or hazardous events, as listed in Annex B, with the exception of the following, relevant to the applicable machines when used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.
It does not establish requirements for hazards that can occur:
——during construction;
——when handling suspended loads that can swing freely;
——when using trucks on public roads;
——when operating in potentially explosive atmospheres;
——when using trucks in very narrow aisles with clearance of less than 500 mm to the racks;
——arising from a non-ergonomic body attitude when driving sit-on trucks, load trailing;
——during travelling with unladen trucks having a rated capacity of more than 10000kg, due to visibility concerns;
——due to overload.
Note 4: For the purposes of this part, fork arms, load platforms and integrated attachments are considered to be parts of the industrial truck. Attachments mounted on the load carrier or on the fork arms which are removable by the user are not considered to be part of the industrial truck. Requirements for attachments are given in the appropriate clauses.
Contents of GB 10827.1-2014
Foreword I
Introduction III
1 Scope
2 Normative References
3 Terms and Definitions
4 Safety Requirements and/or Protective Measures
5 Verification of Safety Requirements and/or Protective Measures
6 Information for Use
Annex A (Normative) Determination of Driving Direction and Rated Capacity
Annex B (Informative) List of Significant Hazards
References
