Standard No.:	GB 16895.26-2005
English Name:	Electrical installations of buildings - Part 7-740: Requirements for special installations or locations - Structures, amusement devices and booths at fairgrouds, amusement parks and c
Chinese Name:	建筑物电气装置第7-740部分：特殊装置或场所的要求 游乐场和马戏场中的构筑物、娱乐设施和棚屋
Chinese Classification:	Q77    Building electrical equipment and disaster prevention equipment and instrument
Professional Classification:	GB    National Standard
ICS Classification:	91.140.50 91.140.50    Electricity supply systems 91.140.50
Issued by:	AQSIQ; SAC
Issued on:	2005-7-29
Implemented on:	2006-6-1
Status:	valid
Language:	English
File Format:	PDF
Word Count:	3000 words
Price(USD):	100.0
Delivery:	via email in 1 business day

740.1 Scope, Object and Fundamental Principles 740.1.1 Scope This Part specifies the minimum electrical installation requirements to facilitate the safe design, installation and operation of mobile, temporarily or permanently installed electrical machines and structures which incorporate electrical installations. The electrical machines and structures are intended to be installed repeatedly, without loss of safety, temporarily or permanently, at fairgrounds, circuses or any other places. The object of this Part is to define the electrical installation requirements for such structures and machines, both being either integral parts or constituting the total amusement device. This part does not apply to the electrical equipment of machines (see IEC 60204-1). 740.1.2 Normative References The following normative documents contain provisions which, through reference in this text, constitute provisions of this Part. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this Part are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. GB 14048.2-2001 Low-voltage Switchgear and Controlgear - Low-voltage Circuit Breakers (idt IEC 60947-2: 1996) GB 16895.3-2004 Electrical Installations of Buildings - Part 5-54: Selection and Erection of Electrical Equipment - Earthing Arrangements, Protective Conductors and Protective Bonding Conductors (IEC 60364-5-54: 2002, IDT) GB 16895.21-2004 Electrical Installations of Buildings - Part 4-41: Protection for Safety - Protection Against Electric Shock (IEC 60364-4-41: 2001, IDT) GB 16916.1-2003 Residual Current Operated Circuit-breakers without Integral Overcurrent Protection for Household and Similar Uses (RCCB) - Part 1: General Rules (IEC 61008-1: 1996, MOD) GB 16917.1-2003 Residual Current Operated Circuit-breakers without Integral Overcurrent Protection for Household and Similar Uses(RCCB) - Part 1: General Rules (idt IEC 61009-1: 1996, MOD) GB/T 17651 (all the parts) Measurement of Smoke Density of Cables Burning under Defined Conditions (idt IEC 61034) GB/T 18380.1-2001 Tests on Electric Cables under Fire Conditions - Part 1: Test on a Single Vertical Insulated Wire or Cable (idt IEC 60332-1: 1993) IEC 60038: 1983 IEC Standard Voltages IEC 60050(826): 1982 International Electrotechnical Vocabulary (IEV) – Part 826: Electrical Installations of Buildings IEC 60204-1: 1997 Electrical Equipment of Machines - Part 1: General Requirements IEC 60332-3: 1992 Tests on Electric Cables under Fire Conditions - Part 3: Test on Bunched Wires or Cable IEC 60364-3: 1993 Electrical Installations of Buildings - Part 3: Assessment of General Characteristics 1EC 60364-4 481: 1993 Electrical Installations of Buildings - Part 4: Protection for Safety. Chapter 48: Choice of Protective Measures as a Function of External Influences – Section 481: Selection of Measures for Protection against Electric Shock in Relation to External Influences IEC 61046: 1993 DC or AC Supplied Electronic Step-down Convertors for Filament Lamps IEC 61558-2-6: 1997 Safety of Power Transformers, Power Supply Units and Similar - Part 2: Particular Requirements for Safety Isolating Transformers for General Use IEC 62020: 1998 Electrical Accessories-Residual Current Monitors (RCM) for Household and Similar Uses (RCMs) CENTC152 Non-permanent Structures and Equipment for Fairgrounds and Amusement Parks: Safety 740.2 Definitions

Foreword I Introduction II 740.1 Scope, Object and Fundamental Principles 740.1.1 Scope 740.1.2 Normative References 740.2 Definitions 740.3 Assessment of General Characteristics 740.31 Purpose, Suppliers and Structure 740.4 Protection for Safety 740.41 Protection Against Electric Shock 740.47 Application of Protective Measures for Safety 740.48 Selection of Protective Measures as a Function of External Influences 740.5 Selection and Erection of Electrical Equipment 740.51 Common Rules 740.52 Wiring Systems 740.53 Switchgear and Controlgear 740.55 Other Equipment 740.6 Verification