GB 2099.4-2008 Plugs and socket-outlets for household and similar purposes - Part 2: Particular requirements for switched socket-outlets without interlock for fixed installations (English Version)
Plugs and socket-outlets for household and similar purposes - Part 2: Particular requirements for switched socket-outlets without interlock for fixed installations
1 Scope
This clause of GB 2099.1 is applicable except as follows.
Replacement of the first paragraph:
This part applies to switched socket-outlets without interlock, for fixed installation, for a.c. only, with or without earthing contact, with a rated voltage not exceeding 440 V and a rated current not exceeding 32A, intended for household and similar purposes, either indoors or outdoors.
NOTE 101: Switched socket-outlets can also be produced by combining a socket-outlet of GB 2099.1 and a switch of GB 16915.1
2 Normative references
The following documents contain provisions which, through reference in this part of GB 2099, constitute provisions of this part. For dated reference, subsequent amendments to (excluding correction contents), any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. For undated references, the latest edition of the normative document is applicable to this part.
This clause of GB 2099.1 is applicable.
3 Terms and Definitions
This clause of GB 2099.1 is applicable except as follows.
Addition:
3.101 switched socket-outlet
factory assembled unit consisting of a socket-outlet with a switch controlling the socket-outlet.
3.102 multiple switched socket-outlet
accessory incorporating more than one switched socket-outlet, each socket-outlet being
controlled by its own switch.
NOTE: Single socket-outlet or multiple socket-outlet can be controlled by one switch in China.1)
3.103 switch
device designed to make or break the current in one or more electric circuits.
3.104 one operation
transfer of the moving contacts from one operating position to another.
4 General requirements
This clause of GB 2099.1 is applicable.
Foreword
IEC Foreword
1 Scope
2 Normative references
3 Terms and Definitions
4 General requirements
5 General notes on tests
6 Ratings
7 Classification
8 Marking
9 Checking of dimensions
10 Protection against electric shock
11 Provision for earthing
12 Terminals and terminations
13 Construction of fixed socket-outlets
14 Construction of plugs and portable socket-outlets
15 Interlocked socket-outlets
16 Resistance to ageing, protection provided by enclosures, and resistance to humidity
17 Insulation resistance and electric strength
18 Operation of earthing contacts
19 Temperature rise
20 Breaking capacity
21 Normal operation
22 Force necessary to withdraw the plug
23 Flexible cables and their connection
24 Mechanical strength
25 Resistance to heat
26 Screws, current-carrying parts and connections
27 Creepage distances, clearances and distances through sealing compound
28 Resistance of insulating material to abnormal heat, to fire and to tracking
29 Resistance to rusting
30 Additional tests on pins provided with insulating sleeves
GB 2099.4-2008 Plugs and socket-outlets for household and similar purposes - Part 2: Particular requirements for switched socket-outlets without interlock for fixed installations (English Version)
Standard No.
GB 2099.4-2008
Status
valid
Language
English
File Format
PDF
Word Count
5000 words
Price(USD)
120.0
Implemented on
2009-8-1
Delivery
via email in 1 business day
Detail of GB 2099.4-2008
Standard No.
GB 2099.4-2008
English Name
Plugs and socket-outlets for household and similar purposes - Part 2: Particular requirements for switched socket-outlets without interlock for fixed installations
1 Scope
This clause of GB 2099.1 is applicable except as follows.
Replacement of the first paragraph:
This part applies to switched socket-outlets without interlock, for fixed installation, for a.c. only, with or without earthing contact, with a rated voltage not exceeding 440 V and a rated current not exceeding 32A, intended for household and similar purposes, either indoors or outdoors.
NOTE 101: Switched socket-outlets can also be produced by combining a socket-outlet of GB 2099.1 and a switch of GB 16915.1
2 Normative references
The following documents contain provisions which, through reference in this part of GB 2099, constitute provisions of this part. For dated reference, subsequent amendments to (excluding correction contents), any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. For undated references, the latest edition of the normative document is applicable to this part.
This clause of GB 2099.1 is applicable.
3 Terms and Definitions
This clause of GB 2099.1 is applicable except as follows.
Addition:
3.101 switched socket-outlet
factory assembled unit consisting of a socket-outlet with a switch controlling the socket-outlet.
3.102 multiple switched socket-outlet
accessory incorporating more than one switched socket-outlet, each socket-outlet being
controlled by its own switch.
NOTE: Single socket-outlet or multiple socket-outlet can be controlled by one switch in China.1)
3.103 switch
device designed to make or break the current in one or more electric circuits.
3.104 one operation
transfer of the moving contacts from one operating position to another.
4 General requirements
This clause of GB 2099.1 is applicable.
Contents of GB 2099.4-2008
Foreword
IEC Foreword
1 Scope
2 Normative references
3 Terms and Definitions
4 General requirements
5 General notes on tests
6 Ratings
7 Classification
8 Marking
9 Checking of dimensions
10 Protection against electric shock
11 Provision for earthing
12 Terminals and terminations
13 Construction of fixed socket-outlets
14 Construction of plugs and portable socket-outlets
15 Interlocked socket-outlets
16 Resistance to ageing, protection provided by enclosures, and resistance to humidity
17 Insulation resistance and electric strength
18 Operation of earthing contacts
19 Temperature rise
20 Breaking capacity
21 Normal operation
22 Force necessary to withdraw the plug
23 Flexible cables and their connection
24 Mechanical strength
25 Resistance to heat
26 Screws, current-carrying parts and connections
27 Creepage distances, clearances and distances through sealing compound
28 Resistance of insulating material to abnormal heat, to fire and to tracking
29 Resistance to rusting
30 Additional tests on pins provided with insulating sleeves