1 Scope
This part of GB 25684 gives the safety requirements specific to roller.
It is intended to be used in conjunction with GB 25684.1, which specifies general safety requirements common to earth-moving machine families. The specific requirements given in this part take precedence over the general requirements of GB 25684.1.
This part is applicable to the roller as defined in GB/T 8498.
This part deals with all significant hazards, hazardous situations and events relevant to the earth-moving machinery within its Scope when used as intended or under conditions of misuse reasonably foreseeable by the manufacturer. It specifies the appropriate technical measures for eliminating or reducing risks arising from significant hazards, hazardous situations or events during application, operation and maintenance.
It is not applicable to machines manufactured before the date of its publication.
2 Normative References
The following documents contain provisions which, through reference in this part of GB 25684, constitute provisions of this part. For dated reference, subsequent amendments to (excluding any corrigendum), or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. For any undated references, the latest edition of the document referred to applies.
GB/T 3767-1996 Acoustics-Determination of Sound Power Levels of Noise Sources Using Sound Pressure–Engineering Method in an Essentially Free Field over a Reflecting Plane(eqv ISO 3744: 1994)
GB/T 7920.5 Earth-moving Machinery-Rollers and Landfill Compactors-Terminology and Commercial Specification (GB/T 7920.5-2003, ISO 8811: 2000, MOD)
GB/T 8498 Earth-moving Machinery - Basic Type - Identification and Terms and Definitions (GB/T 8498-2008, ISO 6165: 2006, IDT)
GB 16754 Safety of Machinery - Emergency Stop Principles for Design (GB 16754-2008, ISO 13850: 2006, IDT)
GB/T 17248.2 Acoustics - Noise Emitted by Machinery and Equipment - Measurement of Emission Sound Pressure Levels at a Work Station and at Other Specified Positions - Engineering Method in an Essentially Free Field Over a Reflecting Plane (GB/T 17248.2-1999, eqv ISO 11201: 1995)
GB/T 17772 Earth-moving machinery—Laboratory Evaluations of Protective Structures—Specifications for Deflection-limiting Volume (GB/T 17772-1999, idt ISO 3164: 1995)
GB/T 17921 Earth-moving Machinery - Seat Belts and Seat Belt Anchorages - Performance Requirements and Tests (GB/T 17921-2010, ISO 6683: 2005, MOD)
GB/T 17922 Earth-moving Machinery—Roll-over Protective Structures—Laboratory Tests and Performance Requirements (GB/T 17922-1999, idt ISO 3471: 1994)
GB/T 21152 Earth-moving Machinery - Braking Systems of Rubber-tyred Machines - Systems and Performance Requirements and Test Procedures (GB/T 21152-2007, ISO 3450: 1996, IDT)
GB/T 21935 Earth-moving Machinery - Zones of Comfort and Reach for Controls (GB/T 21935-2008, ISO 6682: 1986, IDT)
GB/T 25609 Earth-moving Machinery - Braking Systems of Pedestrian-controlled Machines - Performance Requirements and Test Procedures (GB/T 25609-2010, ISO 17063: 2003, IDT)
GB 25684.1-2010 Earth-moving Machinery - Safety - Part 1: General Requirements (ISO 20474-1: 2008, MOD)
ISO 20643: 2005 Mechanical Vibration-Hand-held and Hand-guided Machinery-Principles for Evaluation of Vibration Emission
3 Terms and Definitions
For the purposes of this part of GB 25684, the terms and definitions given in GB 25684.1 and GB/T 7920.5, and the following, apply.
3.1
Roller
Self-propelled or towed machine having a compaction device, consisting of one or more metallic cylindrical bodies (drums) or rubber tyres, which compacts material such as crushed rock, earth, asphalt or gravel through a rolling and/or vibrating action of the compaction device
[GB/T 8498-2008, definition 4.10]
Note: the metallic cylindrical bodies can be either rubber-coated or fitted with pads.
3.1.1
Single-drum roller
Foreword i
Introduction iii
1 Scope
2 Normative References
3 Terms and Definitions
4 Safety Requirements and/or Protective Measures
5 Verification of Safety Requirements and/or Protective Measures
6 Information for Use
Appendix A (Normative) Noise-Test Code For Non-Riding And Remote-Control Vibratory Rollers With Working Width ≤ 1 M
Appendix B (Normative) Test Code For Hand-Arm Vibration of Non-Riding Vibratory Rollers With Working Width ≤ 1 M
1 Scope
This part of GB 25684 gives the safety requirements specific to roller.
It is intended to be used in conjunction with GB 25684.1, which specifies general safety requirements common to earth-moving machine families. The specific requirements given in this part take precedence over the general requirements of GB 25684.1.
This part is applicable to the roller as defined in GB/T 8498.
This part deals with all significant hazards, hazardous situations and events relevant to the earth-moving machinery within its Scope when used as intended or under conditions of misuse reasonably foreseeable by the manufacturer. It specifies the appropriate technical measures for eliminating or reducing risks arising from significant hazards, hazardous situations or events during application, operation and maintenance.
It is not applicable to machines manufactured before the date of its publication.
2 Normative References
The following documents contain provisions which, through reference in this part of GB 25684, constitute provisions of this part. For dated reference, subsequent amendments to (excluding any corrigendum), or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. For any undated references, the latest edition of the document referred to applies.
GB/T 3767-1996 Acoustics-Determination of Sound Power Levels of Noise Sources Using Sound Pressure–Engineering Method in an Essentially Free Field over a Reflecting Plane(eqv ISO 3744: 1994)
GB/T 7920.5 Earth-moving Machinery-Rollers and Landfill Compactors-Terminology and Commercial Specification (GB/T 7920.5-2003, ISO 8811: 2000, MOD)
GB/T 8498 Earth-moving Machinery - Basic Type - Identification and Terms and Definitions (GB/T 8498-2008, ISO 6165: 2006, IDT)
GB 16754 Safety of Machinery - Emergency Stop Principles for Design (GB 16754-2008, ISO 13850: 2006, IDT)
GB/T 17248.2 Acoustics - Noise Emitted by Machinery and Equipment - Measurement of Emission Sound Pressure Levels at a Work Station and at Other Specified Positions - Engineering Method in an Essentially Free Field Over a Reflecting Plane (GB/T 17248.2-1999, eqv ISO 11201: 1995)
GB/T 17772 Earth-moving machinery—Laboratory Evaluations of Protective Structures—Specifications for Deflection-limiting Volume (GB/T 17772-1999, idt ISO 3164: 1995)
GB/T 17921 Earth-moving Machinery - Seat Belts and Seat Belt Anchorages - Performance Requirements and Tests (GB/T 17921-2010, ISO 6683: 2005, MOD)
GB/T 17922 Earth-moving Machinery—Roll-over Protective Structures—Laboratory Tests and Performance Requirements (GB/T 17922-1999, idt ISO 3471: 1994)
GB/T 21152 Earth-moving Machinery - Braking Systems of Rubber-tyred Machines - Systems and Performance Requirements and Test Procedures (GB/T 21152-2007, ISO 3450: 1996, IDT)
GB/T 21935 Earth-moving Machinery - Zones of Comfort and Reach for Controls (GB/T 21935-2008, ISO 6682: 1986, IDT)
GB/T 25609 Earth-moving Machinery - Braking Systems of Pedestrian-controlled Machines - Performance Requirements and Test Procedures (GB/T 25609-2010, ISO 17063: 2003, IDT)
GB 25684.1-2010 Earth-moving Machinery - Safety - Part 1: General Requirements (ISO 20474-1: 2008, MOD)
ISO 20643: 2005 Mechanical Vibration-Hand-held and Hand-guided Machinery-Principles for Evaluation of Vibration Emission
3 Terms and Definitions
For the purposes of this part of GB 25684, the terms and definitions given in GB 25684.1 and GB/T 7920.5, and the following, apply.
3.1
Roller
Self-propelled or towed machine having a compaction device, consisting of one or more metallic cylindrical bodies (drums) or rubber tyres, which compacts material such as crushed rock, earth, asphalt or gravel through a rolling and/or vibrating action of the compaction device
[GB/T 8498-2008, definition 4.10]
Note: the metallic cylindrical bodies can be either rubber-coated or fitted with pads.
3.1.1
Single-drum roller
Contents of GB 25684.13-2010
Foreword i
Introduction iii
1 Scope
2 Normative References
3 Terms and Definitions
4 Safety Requirements and/or Protective Measures
5 Verification of Safety Requirements and/or Protective Measures
6 Information for Use
Appendix A (Normative) Noise-Test Code For Non-Riding And Remote-Control Vibratory Rollers With Working Width ≤ 1 M
Appendix B (Normative) Test Code For Hand-Arm Vibration of Non-Riding Vibratory Rollers With Working Width ≤ 1 M
