1 Scope
This standard specifies the terms and definitions, specification, grade, marking, material, technical requirement, test method, inspection rule, product qualification certificate, stacking and transportation of loadbearing concrete perforated brick.
This standard is applicable to concrete perforated bricks used in loadbearing structures like industrial and civil buildings.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments to (excluding amending errors in the text), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of the normative document is applicable. For undated references, the latest edition of the normative document applies.
GB 175 Common Portland Cement
GB/T 1346 Standard Test Methods for Water Requirement of Normal Consistency, Setting Time and Soundness of the Cements
GB/T 1596 Fly Ash Used for Cement and Concrete
GB/T 2542 Test Methods for Wall Bricks
GB/T 4111 Test Methods for the Small Concrete Hollow Block
GB 6566 Limit of Radionuclides in Building Materials
GB 8076 Concrete Admixtures
GB/T 14684 Sand for Building
GB/T 14685 Pebble and Crushed Stone for Construction
GB/T 17431.1 Lightweight Aggregates and Its Test Methods - Part 1: Lightweight Aggregates
GB/T 17669.3 Gypsum Plasters - Determination of Mechanical Properties
GB/T 17671 Method of Testing Cements - Determination of Strength
GB/T 18046 Ground Granulated Blast Furnace Slag used for Cement and Concrete
GB/T 18968 Terms of Wall Materials
JGJ 63 Standard of Water for Concrete
YBJ 20584 Technical Specification for Crushed Air-cooled Blast Furnace Slag for Concrete
3 Terms and Definitions
For the purposes of this standard, the terms and definitions specified in GB/T 18968 and those listed below apply.
3.1
Loadbearing concrete perforated brick
Perforated bricks (hereinafter referred to as concrete perforated brick with code of LPB) mainly made from cement, sand and stone through dosing, stirring, molding and curing and used in load-bearing structures.
Foreword I
1 Scope
2 Normative References
3 Terms and Definitions
4 Specification, Grade and Marking
5 Materials
6 Technical Requirements
7 Test Method
8 Inspection Rule
9 Qualification Certificate, Stacking and Transportation
Appendix A (Normative) Compressive Strength Test Method for Concrete Perforated Brick
Appendix B (Normative) Carbonization Coefficient Test Method for Concrete Perforated Brick
Appendix C (Normative) Softening Coefficient Test Method for Concrete Perforated Brick
1 Scope
This standard specifies the terms and definitions, specification, grade, marking, material, technical requirement, test method, inspection rule, product qualification certificate, stacking and transportation of loadbearing concrete perforated brick.
This standard is applicable to concrete perforated bricks used in loadbearing structures like industrial and civil buildings.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments to (excluding amending errors in the text), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of the normative document is applicable. For undated references, the latest edition of the normative document applies.
GB 175 Common Portland Cement
GB/T 1346 Standard Test Methods for Water Requirement of Normal Consistency, Setting Time and Soundness of the Cements
GB/T 1596 Fly Ash Used for Cement and Concrete
GB/T 2542 Test Methods for Wall Bricks
GB/T 4111 Test Methods for the Small Concrete Hollow Block
GB 6566 Limit of Radionuclides in Building Materials
GB 8076 Concrete Admixtures
GB/T 14684 Sand for Building
GB/T 14685 Pebble and Crushed Stone for Construction
GB/T 17431.1 Lightweight Aggregates and Its Test Methods - Part 1: Lightweight Aggregates
GB/T 17669.3 Gypsum Plasters - Determination of Mechanical Properties
GB/T 17671 Method of Testing Cements - Determination of Strength
GB/T 18046 Ground Granulated Blast Furnace Slag used for Cement and Concrete
GB/T 18968 Terms of Wall Materials
JGJ 63 Standard of Water for Concrete
YBJ 20584 Technical Specification for Crushed Air-cooled Blast Furnace Slag for Concrete
3 Terms and Definitions
For the purposes of this standard, the terms and definitions specified in GB/T 18968 and those listed below apply.
3.1
Loadbearing concrete perforated brick
Perforated bricks (hereinafter referred to as concrete perforated brick with code of LPB) mainly made from cement, sand and stone through dosing, stirring, molding and curing and used in load-bearing structures.
Contents of GB 25779-2010
Foreword I
1 Scope
2 Normative References
3 Terms and Definitions
4 Specification, Grade and Marking
5 Materials
6 Technical Requirements
7 Test Method
8 Inspection Rule
9 Qualification Certificate, Stacking and Transportation
Appendix A (Normative) Compressive Strength Test Method for Concrete Perforated Brick
Appendix B (Normative) Carbonization Coefficient Test Method for Concrete Perforated Brick
Appendix C (Normative) Softening Coefficient Test Method for Concrete Perforated Brick