Foreword
Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative.
This document is developed in accordance with the rules given in GB/T 1.1-2020 Directives for standardization - Part 1: Rules for the structure and drafting of standardizing documents.
This document is the Part 6 of GB 39800 Specifications for the provision of personal protective equipment. The following parts of GB 39800 have been published:
——Part 1: General requirement;
——Part 2: Oil, chemical and gas industry;
——Part 3: Metallurgy, nonferrous metals;
——Part 4: Non-coal mines;
——Part 5: Building materials industry
——Part 6: Electric power industry;
——Part 7: Electronic industry.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. The issuing body of this document shall not be held responsible for identifying any or all such patent rights.
This document was proposed by and is under the jurisdiction of the Ministry of Emergency Management of the People's Republic of China.
Introduction
Personal protective equipment, also known as labor protective equipment, is the "last line of defense" to protect the lives of hundreds of millions of workers. It is an important means for employee to do a good job in safety production and emergency management in China to wear and use personal protective equipment correctly. The formulation of mandatory personal protective equipment provision standards is to concretize and standardize the requirements of Article 45 of the Law of the People’s Republic of China on Work Safety. GB 39800 Specifications for the provision of personal protective equipment, aiming to establish the provision and management requirements of personal protective equipment of employers, is proposed to consist of the following ten parts.
——Part 1: General requirement. The purpose is to establish the general requirements of personal protective equipment for employers, including provision principles, provision processes, identification and evaluation of hazardous factors in workplaces, selection, waste judgment and replacement, training and use of personal protective equipment, etc.
——Part 2: Oil, chemical and gas industry. The purpose is to establish the provision requirements, identification and evaluation of hazardous factors of personal protective equipment for employers in oil, chemical and gas industry.
——Part 3: Metallurgy, nonferrous metals. The purpose is to establish the provision requirements, identification and evaluation of hazardous factors of personal protective equipment for employers in metallurgy, nonferrous metals industry.
——Part 4: Non-coal mines. The purpose is to establish the provision requirements, identification and evaluation of hazardous factors of personal protective equipment for employers in non-coal mines industry.
——Part 5: Building materials industry. The purpose is to establish the provision requirements, identification and evaluation of hazardous factors of personal protective equipment for employers in building materials industry.
——Part 6: Electric power industry. The purpose is to establish the provision requirements, identification and evaluation of hazardous factors of personal protective equipment for employers in electric power industry.
——Part 7: Electronic industry. The purpose is to establish the provision requirements, identification and evaluation of hazardous factors of personal protective equipment for employers in electronic industry.
——Part 8: Shipbuilding industry. The purpose is to establish the provision requirements, identification and evaluation of hazardous factors of personal protective equipment for employers in shipbuilding industry.
——Part 9: Automobile industry. The purpose is to establish the provision requirements, identification and evaluation of hazardous factors of personal protective equipment for employers in automobile industry.
——Part 10: Machinery industry. The purpose is to establish the provision requirements, identification and evaluation of hazardous factors of personal protective equipment for employers in machinery industry.
The provision of personal protective equipment is based on fully identifying and evaluating the hazard factors of specific types of work, and the hazard factors faced by different types of work in different industries are very different. Therefore, it is compiled into partial documents according to different industries, which together constitute the management standard system of personal protective equipment provision in China. In the future, more industries will be included in due course according to the situation, and the management standard system of personal protective equipment in China will be further improved.
Specifications for the provision of personal protective equipment - Part 6: Electric power industry
1 Scope
This document specifies the general requirements for the provision of personal protective equipment (i.e. labor protective equipment), the identification and evaluation of hazard factors and the provision requirements of personal protective equipment of each employer in the electric power industry.
This document is applicable to the provision and management of personal protective equipment of employers in the electric power industry, and also to the provision and management of personal protective equipment of workers in employers in other industries.
This document is not applicable to the provision and management of personal protective equipment for fire protection by employers in electric power industry.
2 Normative references
The following documents contain requirements which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB 39800.1-2020 Specification of the provision of personal protective equipment - Part 1: General requirement
NB/T 20443 Rules for radiation protection in operational nuclear power plants
3 Terms and definitions
For the purposes of this document, the terms and definitions given in GB 39800.1-2020 apply.
4 General requirements
The provision principle, provision management and provision process of personal protective equipment shall be implemented according to GB 39800.1-2020.
Foreword i
Introduction ii
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements
5 Identification and evaluation of hazard factors
6 Provision of personal protective equipment
Annex A (Informative) Types of work in electric power industry and possible hazard factors
Annex B (Informative) Provision of personal protective equipment for various types of work in electric power industry
Bibliography
Foreword
Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative.
This document is developed in accordance with the rules given in GB/T 1.1-2020 Directives for standardization - Part 1: Rules for the structure and drafting of standardizing documents.
This document is the Part 6 of GB 39800 Specifications for the provision of personal protective equipment. The following parts of GB 39800 have been published:
——Part 1: General requirement;
——Part 2: Oil, chemical and gas industry;
——Part 3: Metallurgy, nonferrous metals;
——Part 4: Non-coal mines;
——Part 5: Building materials industry
——Part 6: Electric power industry;
——Part 7: Electronic industry.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. The issuing body of this document shall not be held responsible for identifying any or all such patent rights.
This document was proposed by and is under the jurisdiction of the Ministry of Emergency Management of the People's Republic of China.
Introduction
Personal protective equipment, also known as labor protective equipment, is the "last line of defense" to protect the lives of hundreds of millions of workers. It is an important means for employee to do a good job in safety production and emergency management in China to wear and use personal protective equipment correctly. The formulation of mandatory personal protective equipment provision standards is to concretize and standardize the requirements of Article 45 of the Law of the People’s Republic of China on Work Safety. GB 39800 Specifications for the provision of personal protective equipment, aiming to establish the provision and management requirements of personal protective equipment of employers, is proposed to consist of the following ten parts.
——Part 1: General requirement. The purpose is to establish the general requirements of personal protective equipment for employers, including provision principles, provision processes, identification and evaluation of hazardous factors in workplaces, selection, waste judgment and replacement, training and use of personal protective equipment, etc.
——Part 2: Oil, chemical and gas industry. The purpose is to establish the provision requirements, identification and evaluation of hazardous factors of personal protective equipment for employers in oil, chemical and gas industry.
——Part 3: Metallurgy, nonferrous metals. The purpose is to establish the provision requirements, identification and evaluation of hazardous factors of personal protective equipment for employers in metallurgy, nonferrous metals industry.
——Part 4: Non-coal mines. The purpose is to establish the provision requirements, identification and evaluation of hazardous factors of personal protective equipment for employers in non-coal mines industry.
——Part 5: Building materials industry. The purpose is to establish the provision requirements, identification and evaluation of hazardous factors of personal protective equipment for employers in building materials industry.
——Part 6: Electric power industry. The purpose is to establish the provision requirements, identification and evaluation of hazardous factors of personal protective equipment for employers in electric power industry.
——Part 7: Electronic industry. The purpose is to establish the provision requirements, identification and evaluation of hazardous factors of personal protective equipment for employers in electronic industry.
——Part 8: Shipbuilding industry. The purpose is to establish the provision requirements, identification and evaluation of hazardous factors of personal protective equipment for employers in shipbuilding industry.
——Part 9: Automobile industry. The purpose is to establish the provision requirements, identification and evaluation of hazardous factors of personal protective equipment for employers in automobile industry.
——Part 10: Machinery industry. The purpose is to establish the provision requirements, identification and evaluation of hazardous factors of personal protective equipment for employers in machinery industry.
The provision of personal protective equipment is based on fully identifying and evaluating the hazard factors of specific types of work, and the hazard factors faced by different types of work in different industries are very different. Therefore, it is compiled into partial documents according to different industries, which together constitute the management standard system of personal protective equipment provision in China. In the future, more industries will be included in due course according to the situation, and the management standard system of personal protective equipment in China will be further improved.
Specifications for the provision of personal protective equipment - Part 6: Electric power industry
1 Scope
This document specifies the general requirements for the provision of personal protective equipment (i.e. labor protective equipment), the identification and evaluation of hazard factors and the provision requirements of personal protective equipment of each employer in the electric power industry.
This document is applicable to the provision and management of personal protective equipment of employers in the electric power industry, and also to the provision and management of personal protective equipment of workers in employers in other industries.
This document is not applicable to the provision and management of personal protective equipment for fire protection by employers in electric power industry.
2 Normative references
The following documents contain requirements which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB 39800.1-2020 Specification of the provision of personal protective equipment - Part 1: General requirement
NB/T 20443 Rules for radiation protection in operational nuclear power plants
3 Terms and definitions
For the purposes of this document, the terms and definitions given in GB 39800.1-2020 apply.
4 General requirements
The provision principle, provision management and provision process of personal protective equipment shall be implemented according to GB 39800.1-2020.
Contents of GB 39800.6-2023
Foreword i
Introduction ii
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements
5 Identification and evaluation of hazard factors
6 Provision of personal protective equipment
Annex A (Informative) Types of work in electric power industry and possible hazard factors
Annex B (Informative) Provision of personal protective equipment for various types of work in electric power industry
Bibliography
