GB 46037-2025 Non-traditional machines—Safety technical requirements English, Anglais, Englisch, Inglés, えいご
This is a draft translation for reference among interesting stakeholders. The finalized translation (passing thorugh draft translation, self-check, revision and varification) will be delivered upon being ordered.
1 Scope
This document specifies general safety requirements for non-traditional machines, as well as specific safety requirements for electrical discharge machines, electrochemical machines, additive manufacturing machines, and laser processing machines.
This document applies to the design, manufacture, and use of various types of non-traditional machines.
2 Normative References
The following documents contain provisions which, through normative reference in this text, constitute indispensable provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 261 Determination of flash point — Pensky-Martens closed cup method
GB/T 5226.1 Electrical safety of machinery — Electrical equipment of machines — Part 1: General requirements
GB/T 7247.1 Safety of laser products — Part 1: Equipment classification and requirements
GB/T 7247.4 Safety of laser products — Part 4: Laser guards
GB/T 14896.1 Non-traditional machines — Terminology — Part 1: Basic terminology
GB/T 14896.2 Non-traditional machines — Terminology — Part 2: Electrical discharge machines
GB/T 14896.3 Non-traditional machines — Terminology — Part 3: Electrochemical machines
GB/T 14896.7 Non-traditional machines — Terminology — Part 7: Additive manufacturing machines
GB/T 14896.9 Non-traditional machines — Terminology — Part 9: Laser processing machines
GB 15577 Safety regulations for dust explosion prevention and protection
GB/T 17626.2 Electromagnetic compatibility — Testing and measurement techniques — Electrostatic discharge immunity test
GB/T 17626.4 Electromagnetic compatibility — Testing and measurement techniques — Electrical fast transient/burst immunity test
GB/T 17626.5 Electromagnetic compatibility — Testing and measurement techniques — Surge immunity test
GB/T 17626.8 Electromagnetic compatibility — Testing and measurement techniques — Power frequency magnetic field immunity test
GB/T 17626.11 Electromagnetic compatibility — Testing and measurement techniques — Part 11: Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to and including 16 A per phase
GB/T 18490.1 Safety of machinery — Laser processing machines — Part 1: General safety requirements
GB/T 18569.1 Safety of machinery — Reduction of risks to health resulting from hazardous substances emitted by machinery — Part 1: Principles and specifications for machinery manufacturers
GB/T 18569.2 Safety of machinery — Reduction of risks to health resulting from hazardous substances emitted by machinery — Part 2: Methodology leading to verification procedures
GB/T 28780 Safety of machinery — Integral lighting systems of machines
3 Terms and Definitions
The terms and definitions defined in GB/T 7247.1, GB/T 14896.1, GB/T 14896.2, GB/T 14896.3, GB/T 14896.7, and GB/T 14896.9, along with the following, apply to this document.
3.1 Non-Traditional Machining
Non-traditional machining processes that remove, accumulate, deform, modify, or coat materials by using electrical, optical, thermal, chemical, or other energy forms, individually or in combination. [SOURCE: GB/T 14896.1—2025, 3.1, modified]
Foreword III
1 Scope
2 Normative references
3 Terms and definitions
4 General safety requirements
5 Safety requirements for electrical discharge machines
6 Safety requirements for electrochemical machines
7 Safety requirements for additive manufacturing machines
8 Safety requirements for laser processing machines
GB 46037-2025 Non-traditional machines—Safety technical requirements English, Anglais, Englisch, Inglés, えいご
This is a draft translation for reference among interesting stakeholders. The finalized translation (passing thorugh draft translation, self-check, revision and varification) will be delivered upon being ordered.
1 Scope
This document specifies general safety requirements for non-traditional machines, as well as specific safety requirements for electrical discharge machines, electrochemical machines, additive manufacturing machines, and laser processing machines.
This document applies to the design, manufacture, and use of various types of non-traditional machines.
2 Normative References
The following documents contain provisions which, through normative reference in this text, constitute indispensable provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 261 Determination of flash point — Pensky-Martens closed cup method
GB/T 5226.1 Electrical safety of machinery — Electrical equipment of machines — Part 1: General requirements
GB/T 7247.1 Safety of laser products — Part 1: Equipment classification and requirements
GB/T 7247.4 Safety of laser products — Part 4: Laser guards
GB/T 14896.1 Non-traditional machines — Terminology — Part 1: Basic terminology
GB/T 14896.2 Non-traditional machines — Terminology — Part 2: Electrical discharge machines
GB/T 14896.3 Non-traditional machines — Terminology — Part 3: Electrochemical machines
GB/T 14896.7 Non-traditional machines — Terminology — Part 7: Additive manufacturing machines
GB/T 14896.9 Non-traditional machines — Terminology — Part 9: Laser processing machines
GB 15577 Safety regulations for dust explosion prevention and protection
GB/T 17626.2 Electromagnetic compatibility — Testing and measurement techniques — Electrostatic discharge immunity test
GB/T 17626.4 Electromagnetic compatibility — Testing and measurement techniques — Electrical fast transient/burst immunity test
GB/T 17626.5 Electromagnetic compatibility — Testing and measurement techniques — Surge immunity test
GB/T 17626.8 Electromagnetic compatibility — Testing and measurement techniques — Power frequency magnetic field immunity test
GB/T 17626.11 Electromagnetic compatibility — Testing and measurement techniques — Part 11: Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to and including 16 A per phase
GB/T 18490.1 Safety of machinery — Laser processing machines — Part 1: General safety requirements
GB/T 18569.1 Safety of machinery — Reduction of risks to health resulting from hazardous substances emitted by machinery — Part 1: Principles and specifications for machinery manufacturers
GB/T 18569.2 Safety of machinery — Reduction of risks to health resulting from hazardous substances emitted by machinery — Part 2: Methodology leading to verification procedures
GB/T 28780 Safety of machinery — Integral lighting systems of machines
3 Terms and Definitions
The terms and definitions defined in GB/T 7247.1, GB/T 14896.1, GB/T 14896.2, GB/T 14896.3, GB/T 14896.7, and GB/T 14896.9, along with the following, apply to this document.
3.1 Non-Traditional Machining
Non-traditional machining processes that remove, accumulate, deform, modify, or coat materials by using electrical, optical, thermal, chemical, or other energy forms, individually or in combination. [SOURCE: GB/T 14896.1—2025, 3.1, modified]
Contents of GB 46037-2025
Foreword III
1 Scope
2 Normative references
3 Terms and definitions
4 General safety requirements
5 Safety requirements for electrical discharge machines
6 Safety requirements for electrochemical machines
7 Safety requirements for additive manufacturing machines
8 Safety requirements for laser processing machines
