GB 5009.190-2026 National food safety standard - Determination of indicator polychlorinated biphenyls in food English
1 Scope
This standard specifies the determination methods for seven indicator polychlorinated biphenyls (PCB 28, PCB 52, PCB 101, PCB 118, PCB 138, PCB 153 and PCB 180) in foods.
Method I and Method II of this standard are applicable to the determination of seven indicator polychlorinated biphenyls and their total amount in aquatic animals and their products, meat and meat products, milk and milk products, eggs and egg products, and oils and fats and their products; Method III is applicable to the determination of seven indicator polychlorinated biphenyls and their total amount in aquatic animals and their products.
Method I Isotope dilution gas chromatography-tandem mass spectrometry
(GC-MS/MS)
2 Principle
A stable isotope is added to the specimen; after extraction, fat removal, cleanup and concentration, the specimen is determined by gas chromatography-tandem mass spectrometry, and quantification is carried out by isotope dilution.
3 Reagents and materials
Unless otherwise specified, the reagents used in this method are of analytical grade, and the water is grade 1 water as specified in GB/T 6682.
3.1 Reagents and materials
3.1.1 n-Hexane (C6H14), chromatographic grade.
3.1.2 Dichloromethane (CH2Cl2), chromatographic grade.
3.1.3 Acetone (C3H6O), chromatographic grade.
3.1.4 Methanol (CH3OH), chromatographic grade.
3.1.5 n-Nonane (C9H20), chromatographic grade.
3.1.6 Anhydrous sodium sulfate (Na2SO4), guaranteed reagent.
3.1.7 Concentrated sulfuric acid (H2SO4), guaranteed reagent.
3.1.8 Silica gel: chromatographic silica gel, with a particle size of 0.063 mm to 0.100 mm.
3.1.9 Alkaline aluminium oxide: 0.063 mm to 0.200 mm, activation grade 1.
3.1.10 Diatomaceous earth: activated diatomaceous earth for extraction, with a bulk density of 18.0 g/100 mL to 36.0 g/100 mL.
3.1.11 Empty solid-phase extraction column: 12 mL.
3.1.12 Glass chromatography column: with a PTFE stopcock, 400 mm (length) × 60 mm (internal diameter), or an equivalent chromatography column.
3.1.13 Soxhlet extraction thimble: cellulose or glass fiber extraction thimble.
3.2 Preparation of reagents
3.2.1 Activated silica gel: pack the silica gel into a glass chromatography column, and wash it once each with methanol and dichloromethane, each in a volume twice that of the silica gel. After the solvent has evaporated, bake at 180°C for 2h. Prepare fresh before use.
3.2.2 Acidified silica gel (44%, mass fraction): wash the silica gel once each with methanol and dichloromethane, each in a volume twice that of the silica gel; after the solvent has evaporated, bake at 600°C for 8h, and take it out after cooling to room temperature. Weigh 112.0g of the silica gel into a 250 mL stoppered ground-neck flask, slowly add 88.0g of concentrated sulfuric acid, close the flask and place it on a shaker to oscillate until the silica gel is in a uniform flowing state. Prepare fresh before use.
3.2.3 Anhydrous sodium sulfate: bake at 600°C for 6h, and take it out after cooling to room temperature. Prepare fresh before use.
3.2.4 Alkaline aluminium oxide: bake at 600°C for 8h, and take it out after cooling to room temperature. Prepare fresh before use.
3.2.5 Solid-phase extraction column: in an empty solid-phase extraction column, pack, from bottom to top, a frit, 1.0g of alkaline aluminium oxide, 0.5g of activated silica gel, 1.0g of acidified silica gel and a frit, and compact them. Prepare fresh before use.
3.3 Standard solutions
3.3.1 Standard stock solution: a standard solution containing PCB28, PCB52, PCB101, PCB118, PCB138, PCB153 and PCB180 (see Table A.1 in Annex A), with a mass concentration of 10 000 ng/mL, or standards with a purity ≥ 99%.
Contents
Foreword i
1 Scope
2 Principle
3 Reagents and materials
4 Apparatus
5 Analytical procedure
6 Expression of analytical results
7 Accuracy
8 Others
9 Principle
10 Reagents and materials
11 Apparatus
12 Analytical procedure
13 Expression of analytical results
14 Accuracy
15 Others
16 Principle
17 Reagents and materials
18 Apparatus
19 Analytical procedure
20 Expression of analytical results
21 Accuracy
22 Others
Annex A Standard solutions for indicator polychlorinated biphenyls
Annex B Characteristic ions and isotope abundance ratios for indicator polychlorinated biphenyls
Annex C Chromatograms of standard solutions of indicator polychlorinated biphenyls
Standard
GB 5009.190-2026 National food safety standard - Determination of indicator polychlorinated biphenyls in food (English)
Standard No.
GB 5009.190-2026
Status
to be valid
Language
English
File Format
PDF
Word Count
12500 words
Translation Price(USD)
375.0
Implemented on
2027-2-18
Delivery
via email in 1 business day
Detail of GB 5009.190-2026
Standard No.
GB 5009.190-2026
English Name
National food safety standard - Determination of indicator polychlorinated biphenyls in food
Chinese Name
食品安全国家标准 食品中指示性多氯联苯含量的测定
Chinese Classification
Professional Classification
GB
ICS Classification
Issued by
National Health Commission and State Administration for Market Regulation
GB 5009.190-2026 National food safety standard - Determination of indicator polychlorinated biphenyls in food English
1 Scope
This standard specifies the determination methods for seven indicator polychlorinated biphenyls (PCB 28, PCB 52, PCB 101, PCB 118, PCB 138, PCB 153 and PCB 180) in foods.
Method I and Method II of this standard are applicable to the determination of seven indicator polychlorinated biphenyls and their total amount in aquatic animals and their products, meat and meat products, milk and milk products, eggs and egg products, and oils and fats and their products; Method III is applicable to the determination of seven indicator polychlorinated biphenyls and their total amount in aquatic animals and their products.
Method I Isotope dilution gas chromatography-tandem mass spectrometry
(GC-MS/MS)
2 Principle
A stable isotope is added to the specimen; after extraction, fat removal, cleanup and concentration, the specimen is determined by gas chromatography-tandem mass spectrometry, and quantification is carried out by isotope dilution.
3 Reagents and materials
Unless otherwise specified, the reagents used in this method are of analytical grade, and the water is grade 1 water as specified in GB/T 6682.
3.1 Reagents and materials
3.1.1 n-Hexane (C6H14), chromatographic grade.
3.1.2 Dichloromethane (CH2Cl2), chromatographic grade.
3.1.3 Acetone (C3H6O), chromatographic grade.
3.1.4 Methanol (CH3OH), chromatographic grade.
3.1.5 n-Nonane (C9H20), chromatographic grade.
3.1.6 Anhydrous sodium sulfate (Na2SO4), guaranteed reagent.
3.1.7 Concentrated sulfuric acid (H2SO4), guaranteed reagent.
3.1.8 Silica gel: chromatographic silica gel, with a particle size of 0.063 mm to 0.100 mm.
3.1.9 Alkaline aluminium oxide: 0.063 mm to 0.200 mm, activation grade 1.
3.1.10 Diatomaceous earth: activated diatomaceous earth for extraction, with a bulk density of 18.0 g/100 mL to 36.0 g/100 mL.
3.1.11 Empty solid-phase extraction column: 12 mL.
3.1.12 Glass chromatography column: with a PTFE stopcock, 400 mm (length) × 60 mm (internal diameter), or an equivalent chromatography column.
3.1.13 Soxhlet extraction thimble: cellulose or glass fiber extraction thimble.
3.2 Preparation of reagents
3.2.1 Activated silica gel: pack the silica gel into a glass chromatography column, and wash it once each with methanol and dichloromethane, each in a volume twice that of the silica gel. After the solvent has evaporated, bake at 180°C for 2h. Prepare fresh before use.
3.2.2 Acidified silica gel (44%, mass fraction): wash the silica gel once each with methanol and dichloromethane, each in a volume twice that of the silica gel; after the solvent has evaporated, bake at 600°C for 8h, and take it out after cooling to room temperature. Weigh 112.0g of the silica gel into a 250 mL stoppered ground-neck flask, slowly add 88.0g of concentrated sulfuric acid, close the flask and place it on a shaker to oscillate until the silica gel is in a uniform flowing state. Prepare fresh before use.
3.2.3 Anhydrous sodium sulfate: bake at 600°C for 6h, and take it out after cooling to room temperature. Prepare fresh before use.
3.2.4 Alkaline aluminium oxide: bake at 600°C for 8h, and take it out after cooling to room temperature. Prepare fresh before use.
3.2.5 Solid-phase extraction column: in an empty solid-phase extraction column, pack, from bottom to top, a frit, 1.0g of alkaline aluminium oxide, 0.5g of activated silica gel, 1.0g of acidified silica gel and a frit, and compact them. Prepare fresh before use.
3.3 Standard solutions
3.3.1 Standard stock solution: a standard solution containing PCB28, PCB52, PCB101, PCB118, PCB138, PCB153 and PCB180 (see Table A.1 in Annex A), with a mass concentration of 10 000 ng/mL, or standards with a purity ≥ 99%.
Contents of GB 5009.190-2026
Contents
Foreword i
1 Scope
2 Principle
3 Reagents and materials
4 Apparatus
5 Analytical procedure
6 Expression of analytical results
7 Accuracy
8 Others
9 Principle
10 Reagents and materials
11 Apparatus
12 Analytical procedure
13 Expression of analytical results
14 Accuracy
15 Others
16 Principle
17 Reagents and materials
18 Apparatus
19 Analytical procedure
20 Expression of analytical results
21 Accuracy
22 Others
Annex A Standard solutions for indicator polychlorinated biphenyls
Annex B Characteristic ions and isotope abundance ratios for indicator polychlorinated biphenyls
Annex C Chromatograms of standard solutions of indicator polychlorinated biphenyls