Motor vehicle safety testing equipment-Technical requirements of verification-Part 6:Technical requirements of veification for symmetrical beam headlamp tester
1 Scope
This standard specifies the technical requirements and relevant methods of verification for symmetrical beam headlamp tester (hereinafter referred to as “headlamp tester”). This standard is applicable to the verification of the headlamp
tester used in the safety detection of motor vehicle.
2 Normative References
The following normative documents contain provisions which, through reference in this standard, constitute provisions of this standard. At time of publication, the editions indicated were valid. All the standards will be revised; all parties coming to an agreement according to this standard are encouraged to study whether the latest editions of the following standards are applicable.
GB/T 5337-1985 Terminologies of electrical device, luminaries, and instruments of motor vehicles
GB 4599-1994 The light distribution performance of motor vehicles headlight
GB/T 6587.7-1986 Basic safety tests for electronic measuring instruments
3 Definition For the purposes of this standard, the following definitions are applied.
3.1 Optical Axle Angle
The included angle of vertical surface with the optic axial of upper beam coincident to the reference line.
3.2 Measurement Distance
The vertical dimension from the fiducial center of headlamp to the photic mirror plane of the headlamp tester.
3.3 Optics Centre Axle
The axis is the line that the pivot (or the optical center point specified of headlamp manufacturer) of the photic mirror plane of headlamp tester vertical to the mirror plane.
3.4 Other definitions are based on the requirements of Chapter 6 in GB/T
5337-1985 and Chapter 1 in GB 4599-1994.
4 Technical Requirements4.1 Appearance and General Requirements4.1.1
The headlamp tester shall have clear nameplate, indicating the name , the model, and the factory number of the equipment.
4.1.2 Various controls such as switch, button, socket and wiring terminal shall have explicit text or symbol marking. The symbol marking shall meet the requirements of relevant standards. The controls shall be in flexible and reliable operation, and shall not have phenomenon such as being loose or being clamped.
GB/T 11798.6-2001 Motor vehicle safety testing equipment-Technical requirements of verification-Part 6:Technical requirements of veification for symmetrical beam headlamp tester (English Version)
Standard No.
GB/T 11798.6-2001
Status
abolished
Language
English
File Format
PDF
Word Count
4000 words
Price(USD)
100.0
Implemented on
2001-12-1
Delivery
via email in 1 business day
Detail of GB/T 11798.6-2001
Standard No.
GB/T 11798.6-2001
English Name
Motor vehicle safety testing equipment-Technical requirements of verification-Part 6:Technical requirements of veification for symmetrical beam headlamp tester
1 Scope
This standard specifies the technical requirements and relevant methods of verification for symmetrical beam headlamp tester (hereinafter referred to as “headlamp tester”). This standard is applicable to the verification of the headlamp
tester used in the safety detection of motor vehicle.
2 Normative References
The following normative documents contain provisions which, through reference in this standard, constitute provisions of this standard. At time of publication, the editions indicated were valid. All the standards will be revised; all parties coming to an agreement according to this standard are encouraged to study whether the latest editions of the following standards are applicable.
GB/T 5337-1985 Terminologies of electrical device, luminaries, and instruments of motor vehicles
GB 4599-1994 The light distribution performance of motor vehicles headlight
GB/T 6587.7-1986 Basic safety tests for electronic measuring instruments
3 Definition For the purposes of this standard, the following definitions are applied.
3.1 Optical Axle Angle
The included angle of vertical surface with the optic axial of upper beam coincident to the reference line.
3.2 Measurement Distance
The vertical dimension from the fiducial center of headlamp to the photic mirror plane of the headlamp tester.
3.3 Optics Centre Axle
The axis is the line that the pivot (or the optical center point specified of headlamp manufacturer) of the photic mirror plane of headlamp tester vertical to the mirror plane.
3.4 Other definitions are based on the requirements of Chapter 6 in GB/T
5337-1985 and Chapter 1 in GB 4599-1994.
4 Technical Requirements4.1 Appearance and General Requirements4.1.1
The headlamp tester shall have clear nameplate, indicating the name , the model, and the factory number of the equipment.
4.1.2 Various controls such as switch, button, socket and wiring terminal shall have explicit text or symbol marking. The symbol marking shall meet the requirements of relevant standards. The controls shall be in flexible and reliable operation, and shall not have phenomenon such as being loose or being clamped.