1 Scope
This standard specifies the characteristics of parallel pins of unhardened steel and austenitic stainless steel, with nominal diameters d from 0.6 mm to 50 mm inclusive.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this standard. When published, all the shown versions are valid. All the standards will be modified, and all parties using this standard shall discuss the possibility of using the latest version.
GB/T 90-1985 Acceptance inspection, marking and packaging of fasteners (eqv ISO 3269:1984)
GB/T 1237-2000 Designation system for fasteners (eqv ISO 8991:1986)
GB/T 3098.6-2000 Mechanical properties of corrosion-resistant stainless-steel fasteners-Part 1:Bolts,screws and studs (idt ISO 3506-1:1997)
GB/T 5267-1985 Electroplated coatings on threaded fasteners
GB/T 11376-1997 Phosphate conversion coatings for metals (eqv ISO 9717:1990)
1 Scope
This standard specifies the characteristics of parallel pins of unhardened steel and austenitic stainless steel, with nominal diameters d from 0.6 mm to 50 mm inclusive.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this standard. When published, all the shown versions are valid. All the standards will be modified, and all parties using this standard shall discuss the possibility of using the latest version.
GB/T 90-1985 Acceptance inspection, marking and packaging of fasteners (eqv ISO 3269:1984)
GB/T 1237-2000 Designation system for fasteners (eqv ISO 8991:1986)
GB/T 3098.6-2000 Mechanical properties of corrosion-resistant stainless-steel fasteners-Part 1:Bolts,screws and studs (idt ISO 3506-1:1997)
GB/T 5267-1985 Electroplated coatings on threaded fasteners
GB/T 11376-1997 Phosphate conversion coatings for metals (eqv ISO 9717:1990)
