GB/T 15166.5-2008 High-voltage Alternating-current Fuses – Part 5: Specification for High-voltage Fuse-links for Motor Circuit Applications (English Version)
1.1 Scope
This part specifies the time-current characteristic, requirements of impulse withstand test and the selection guide of the high-voltage fuse-links for motor circuit applications.
This part applies to fuse-links used with motor started direct-on-line on alternating current systems of 50Hz and with the nominal voltage of 3kV or above.
The normal service conditions and motor starting pulses to which the fuse-links are subjected shall meet the requirements of GB/T 15166.2-2008.
Note: when motors are used with assisted starting, this part can also be applied but particular attention should be paid to the selection of the rated current of the fuse-link and the manufacturer of the fuse-link should preferably be consulted.
1.2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, the parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies.
1 General
2 Technical Requirements
3 Type Test
4 Selection of Fuse-links for Motor Circuits Applications and Correlation of Fuse-link Characteristics with Those of Other Components of the Circuit
5 Information to be Given to the User
Standard
GB/T 15166.5-2008 High-voltage Alternating-current Fuses – Part 5: Specification for High-voltage Fuse-links for Motor Circuit Applications (English Version)
Standard No.
GB/T 15166.5-2008
Status
abolished
Language
English
File Format
PDF
Word Count
3000 words
Price(USD)
130.0
Implemented on
2009-8-1
Delivery
via email in 1 business day
Detail of GB/T 15166.5-2008
Standard No.
GB/T 15166.5-2008
English Name
High-voltage Alternating-current Fuses – Part 5: Specification for High-voltage Fuse-links for Motor Circuit Applications
1.1 Scope
This part specifies the time-current characteristic, requirements of impulse withstand test and the selection guide of the high-voltage fuse-links for motor circuit applications.
This part applies to fuse-links used with motor started direct-on-line on alternating current systems of 50Hz and with the nominal voltage of 3kV or above.
The normal service conditions and motor starting pulses to which the fuse-links are subjected shall meet the requirements of GB/T 15166.2-2008.
Note: when motors are used with assisted starting, this part can also be applied but particular attention should be paid to the selection of the rated current of the fuse-link and the manufacturer of the fuse-link should preferably be consulted.
1.2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, the parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies.
Contents of GB/T 15166.5-2008
1 General
2 Technical Requirements
3 Type Test
4 Selection of Fuse-links for Motor Circuits Applications and Correlation of Fuse-link Characteristics with Those of Other Components of the Circuit
5 Information to be Given to the User