Detail of GB/T 19484.1-2013

Introduction of GB/T 19484.1-2013

1 Scope This part of GB/T 19484 specifies the requirements of electromagnetic compatibility for user equipment (UE) and ancillary equipment of 800 MHz/2 GHz CDMA 2000 digital cellular mobile telecommunications system, including measurement methods, limit value, performance criteria, etc. This part is applicable to CDMA, CDMA 1X, CDMA 2000 and CDMA 2000 HRPD customer premises equipment sending and receiving voice and/or data, including portable and on-board user equipment, as well as user equipment and the like powered by AC power supply and used at fixed position. 2 Normative References The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 6113.104-2008 Specification for Radio Disturbance and Immunity Measuring Apparatus and Methods - Part 1-4: Radio Disturbance and Immunity Measuring Apparatus - Ancillary Equipment - Radiated Disturbances GB 9254-2008 Information Technology Equipment - Radio Disturbance Characteristics - Limits and Methods of Measurement GB 17625.1-2012 Electromagnetic Compatibility – Limits - Limits for Harmonic Current Emissions(Equipment Input Current ≤16 A per Phase) GB 17625.2-2007 Electromagnetic Compatibility (EMC) – Limits - Limitation of Voltage Changes, Voltage Fluctuations and Flicker in Public Low-voltage Supply Systems, for Equipment with Rated Current ≤16 A per Phase and Not Subject to Conditional Connection GB/T 17626.2-2006 Electromagnetic Compatibility (EMC) - Testing and Measurement Techniques - Electrostatic Discharge Immunity Test GB/T 17626.3-2006 Electromagnetic Compatibility - Testing and Measurement Techniques - Radiated Radio-frequency Electromagnetic Field Immunity Test GB/T 17626.4-2008 Electromagnetic Compatibility - Testing and Measurement Techniques - Electrical Fast Transient/Burst Immunity Test GB/T 17626.5-2008 Electromagnetic Compatibility - Testing and Measurement Techniques - Surge Immunity Test GB/T 17626.6-2008 Electromagnetic Compatibility - Testing and Measurement Techniques - Immunity to Conducted Disturbances Induced by Radio-frequency Fields GB/T 17626.8-2006 Electromagnetic Compatibility (EMC) - Testing and Measurement Techniques - Power Frequency Magnetic Field Immunity Test GB/T 17626.29-2006 Electromagnetic Compatibility (EMC) - Testing and Measurement Techniques - Voltage Dips Short Interruptions and Voltage Variations on D.C. Input Power Port Immunity Tests GB/T 21437.2-2008 Road Vehicles - Electrical Disturbances from Conduction and Coupling - Part 2: Electrical Transient Conduction along Supply Lines Only GB/T 22451-2008 Common Requirements of Electromagnetic Compatibility for Radio Communication Equipment YD/T 1483-2006 Technical Requirement and Measurement Method of Spurious Emission of Radio Equipment YD/T 1484-2011 Measurement Method for Radiated RF Power and Receiver Performance of User Equipment IEC 61000-4-11 Electromagnetic Compatibility (EMC) - Part 4: Testing and Measuring Techniques - Section 11: Voltage Dips, Short Interruptions and Voltage Variations Immunity Tests 3 Terms, Definitions and Abbreviations 3.1 Terms and Definitions For the purposes of this document, the following terms and definitions apply. 3.1.1 data application ancillary ancillary equipment providing data access (sending and receiving) service between user equipment and server 3.1.2 forward CDMA channel communication channel from base station to user equipment 3.1.3

Contents of GB/T 19484.1-2013

Foreword i 1 Scope 2 Normative References 3 Terms, Definitions and Abbreviations 4 Test Conditions 5 Performance Assessment Method 6 Performance Criteria 7 Applicability 8 Disturbance Measurement Methods and Limits 9 Test Methods and Grades of Immunity