GB/T 223.3-2026 Iron,steel and alloy—Determination of phosphorus content—Spectrophotometric method,titrimetric method and gravimetric method English
Introduction
Iron and steel are the mainstay of the national economy and the lifeblood of a country, providing material guarantee for the survival and development of the country. Among the standard systems in iron and steel, the standard system concerning methods for determination of chemical compositions of iron, steel and alloy is a very important part which plays an important role in ensuring the quality of iron and steel products. This series of method standards serve the fabrication, trade and application of iron and steel and provide technical support for the high-quality development of China's iron and steel industry.
GB/T 223 includes the methods for determination of chemical compositions of iron, steel and alloy, which respectively specify the determination methods for chemical compositions of carbon, silicon, manganese, phosphorus, sulfur, nickel, chromium, molybdenum, copper, vanadium, aluminum, titanium, cobalt, tungsten, niobium, zirconium, tantalum, calcium, magnesium, zinc, iron, arsenic, lead, tin, antimony, bismuth, selenium, tellurium, cerium, boron, oxygen, nitrogen, hydrogen, total rare earth and insoluble matter in hydrochloric acid, etc.
In 1963, 12 national standards for methods for the determination of chemical compositions of iron and steel were issued for the first time under GB/T 223. With the development of analytical technology and the growth of actual production demands in the fields of iron, steel and alloy, an improved standard system has been formed after years of revision. See Annex A for the current components of GB/T 223.
Iron, steel and alloy - Determination of phosphorus content - Spectrophotometric method, titrimetric method and gravimetric method
WARNING - Persons using this document shall have formal laboratory practice. This standard does not purport to address all of the safety concerns. It is the responsibility of the user to establish appropriate safety and health practices.
1 Scope
This document describes methods for the determination of phosphorus content in steel and alloys by spectrophotometry, titration and gravimetry.
The scope of this document is as follows:: Method 1 (Bismuth phosphomolybdenum blue spectrophotometric method) is applicable to the determination of phosphorus content with a mass fraction of 0.005% to 0.30% in pig iron, cast iron, iron powder, carbon steel, low-alloy steel and alloy steel, but is not applicable to the determination of phosphorus content in steels containing niobium or tungsten; Method 2 (Antimony phosphomolybdenum blue spectrophotometric method) is applicable to the determination of phosphorus content with a mass fraction of 0.01% to 0.06% in pig iron, cast iron, iron powder, carbon steel, low-alloy steel and alloy steel, but is not applicable to the determination of phosphorus content in steels containing niobium or tungsten; Method 3 (Butyl acetate extraction spectrophotometric method) is applicable to the determination of phosphorus content with a mass fraction of 0.001% to 0.05% in pig iron, iron powder, carbon steel, alloy steel, superalloys and precision alloys; Method 4 (Phosphovanadomolybdate spectrophotometric method) is applicable to the determination of phosphorus content with a mass fraction of 0.001% to 1.0% in steel and cast iron; Method 5 (Ammonium phosphomolybdate titration method) is applicable to the determination of phosphorus content with a mass fraction of 0.01% to 1.0% in pig iron, iron powder, carbon steel and alloy steel; Method 6 (Diantipyrylmethane phosphomolybdic acid gravimetric method) is applicable to the determination of phosphorus content with a mass fraction of 0.01% to 1.00% in pig iron, iron powder, carbon steel, alloy steel and superalloys.
2 Normative references
The following documents contain requirements which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 6379.1 Accuracy (trueness and precision) of measurement methods and results - Part 1 : General principles and definitions (GB/T 6379.1-2004, ISO 5725-1:1994, IDT)
GB/T 6379.2 Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a STANDARD measurement method (GB/T 6379.2-2004, ISO 5725-2:1994, IDT)
GB/T 6379.3 Accuracy(trueness and precision) of measurement methods and results - Part 3:Intermediate measures of the precision of a standard measurement method (GB/T 6379.3-2012, ISO 5725-3:1994, IDT)
GB/T 6682 Water for analytical laboratory use - Specification and test methods (GB/T 6682-2008, ISO 3696:1987, MOD)
GB/T 7729 Chemical analysis of metallurgical products—General rule for spectrophotometric methods
GB/T 8170 Rules of rounding off for numerical values & expression and judgement of limiting values
GB/T 12805 Laboratory glassware - Burettes (GB/T 12805-2011, ISO 385:2005, NEQ)
GB/T 12806 Laboratory glassware - One-mark volumetric flasks (GB/T 12806-2011, ISO 1042:1998, NEQ)
GB/T 12808 Laboratory glassware - One mark pipettes
GB/T 20066 Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996, IDT)
3 Terms and definitions
No terms and definitions are listed in this document.
Contents
Contents
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Method 1: Bismuth phosphomolybdenum blue spectrophotometric method
4.1 Principle
4.2 Reagents and materials
4.3 Apparatus
4.4 Sampling and sample preparation
4.5 Analytical procedure
4.6 Expression of results
5 Method 2: Antimony phosphomolybdenum blue spectrophotometric method
5.1 Principle
5.2 Reagents and materials
5.3 Apparatus
5.4 Sampling and sample preparation
5.5 Analytical procedure
5.6 Expression of results
6 Method 3: Butyl acetate extraction spectrophotometric method
6.1 Principle
6.2 Reagents and materials
6.3 Apparatus
6.4 Sampling and sample preparation
6.5 Analytical procedure
6.6 Expression of results
7 Method 4: Phosphovanadomolybdate spectrophotometric method
7.1 Principle
7.2 Reagents and materials
7.3 Apparatus
7.4 Sampling and sample preparation
7.5 Analytical procedure
7.6 Expression of results
8 Method 5: Ammonium phosphomolybdate titration method
8.1 Principle
8.2 Reagents and materials
8.3 Apparatus
8.4 Sampling and sample preparation
8.5 Analytical procedure
8.6 Expression of results
9 Method 6: Diantipyrylmethane phosphomolybdic acid gravimetric method
9.1 Principle
9.2 Reagents and materials
9.3 Apparatus
9.4 Sampling and sample preparation
9.5 Analytical procedure
9.6 Expression of results
10 Test report
Annex A (Informative) Components of GB/T
Annex B (Informative) Raw data of the cooperative precision test for Method
Annex C (Informative) Raw data of the cooperative precision test for Method
Annex D (Informative) Raw data of the precision test for Method
Annex E (Informative) Supplementary information on the international inter-laboratory precision test for Method
Annex F (Informative) Graphical representation of precision data for Method
Annex G (Informative) Raw data of the cooperative precision test for Method
Annex H (Informative) Raw data of the cooperative precision test for Method
Standard
GB/T 223.3-2026 Iron,steel and alloy—Determination of phosphorus content—Spectrophotometric method,titrimetric method and gravimetric method (English)
Standard No.
GB/T 223.3-2026
Status
to be valid
Language
English
File Format
PDF
Word Count
24000 words
Translation Price(USD)
720.0
Implemented on
2027-4-1
Delivery
via email in 1~3 business day
Detail of GB/T 223.3-2026
Standard No.
GB/T 223.3-2026
English Name
Iron,steel and alloy—Determination of phosphorus content—Spectrophotometric method,titrimetric method and gravimetric method
GB/T 223.3-2026 Iron,steel and alloy—Determination of phosphorus content—Spectrophotometric method,titrimetric method and gravimetric method English
Introduction
Iron and steel are the mainstay of the national economy and the lifeblood of a country, providing material guarantee for the survival and development of the country. Among the standard systems in iron and steel, the standard system concerning methods for determination of chemical compositions of iron, steel and alloy is a very important part which plays an important role in ensuring the quality of iron and steel products. This series of method standards serve the fabrication, trade and application of iron and steel and provide technical support for the high-quality development of China's iron and steel industry.
GB/T 223 includes the methods for determination of chemical compositions of iron, steel and alloy, which respectively specify the determination methods for chemical compositions of carbon, silicon, manganese, phosphorus, sulfur, nickel, chromium, molybdenum, copper, vanadium, aluminum, titanium, cobalt, tungsten, niobium, zirconium, tantalum, calcium, magnesium, zinc, iron, arsenic, lead, tin, antimony, bismuth, selenium, tellurium, cerium, boron, oxygen, nitrogen, hydrogen, total rare earth and insoluble matter in hydrochloric acid, etc.
In 1963, 12 national standards for methods for the determination of chemical compositions of iron and steel were issued for the first time under GB/T 223. With the development of analytical technology and the growth of actual production demands in the fields of iron, steel and alloy, an improved standard system has been formed after years of revision. See Annex A for the current components of GB/T 223.
Iron, steel and alloy - Determination of phosphorus content - Spectrophotometric method, titrimetric method and gravimetric method
WARNING - Persons using this document shall have formal laboratory practice. This standard does not purport to address all of the safety concerns. It is the responsibility of the user to establish appropriate safety and health practices.
1 Scope
This document describes methods for the determination of phosphorus content in steel and alloys by spectrophotometry, titration and gravimetry.
The scope of this document is as follows:: Method 1 (Bismuth phosphomolybdenum blue spectrophotometric method) is applicable to the determination of phosphorus content with a mass fraction of 0.005% to 0.30% in pig iron, cast iron, iron powder, carbon steel, low-alloy steel and alloy steel, but is not applicable to the determination of phosphorus content in steels containing niobium or tungsten; Method 2 (Antimony phosphomolybdenum blue spectrophotometric method) is applicable to the determination of phosphorus content with a mass fraction of 0.01% to 0.06% in pig iron, cast iron, iron powder, carbon steel, low-alloy steel and alloy steel, but is not applicable to the determination of phosphorus content in steels containing niobium or tungsten; Method 3 (Butyl acetate extraction spectrophotometric method) is applicable to the determination of phosphorus content with a mass fraction of 0.001% to 0.05% in pig iron, iron powder, carbon steel, alloy steel, superalloys and precision alloys; Method 4 (Phosphovanadomolybdate spectrophotometric method) is applicable to the determination of phosphorus content with a mass fraction of 0.001% to 1.0% in steel and cast iron; Method 5 (Ammonium phosphomolybdate titration method) is applicable to the determination of phosphorus content with a mass fraction of 0.01% to 1.0% in pig iron, iron powder, carbon steel and alloy steel; Method 6 (Diantipyrylmethane phosphomolybdic acid gravimetric method) is applicable to the determination of phosphorus content with a mass fraction of 0.01% to 1.00% in pig iron, iron powder, carbon steel, alloy steel and superalloys.
2 Normative references
The following documents contain requirements which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 6379.1 Accuracy (trueness and precision) of measurement methods and results - Part 1 : General principles and definitions (GB/T 6379.1-2004, ISO 5725-1:1994, IDT)
GB/T 6379.2 Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a STANDARD measurement method (GB/T 6379.2-2004, ISO 5725-2:1994, IDT)
GB/T 6379.3 Accuracy(trueness and precision) of measurement methods and results - Part 3:Intermediate measures of the precision of a standard measurement method (GB/T 6379.3-2012, ISO 5725-3:1994, IDT)
GB/T 6682 Water for analytical laboratory use - Specification and test methods (GB/T 6682-2008, ISO 3696:1987, MOD)
GB/T 7729 Chemical analysis of metallurgical products—General rule for spectrophotometric methods
GB/T 8170 Rules of rounding off for numerical values & expression and judgement of limiting values
GB/T 12805 Laboratory glassware - Burettes (GB/T 12805-2011, ISO 385:2005, NEQ)
GB/T 12806 Laboratory glassware - One-mark volumetric flasks (GB/T 12806-2011, ISO 1042:1998, NEQ)
GB/T 12808 Laboratory glassware - One mark pipettes
GB/T 20066 Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996, IDT)
3 Terms and definitions
No terms and definitions are listed in this document.
Contents of GB/T 223.3-2026
Contents
Contents
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Method 1: Bismuth phosphomolybdenum blue spectrophotometric method
4.1 Principle
4.2 Reagents and materials
4.3 Apparatus
4.4 Sampling and sample preparation
4.5 Analytical procedure
4.6 Expression of results
5 Method 2: Antimony phosphomolybdenum blue spectrophotometric method
5.1 Principle
5.2 Reagents and materials
5.3 Apparatus
5.4 Sampling and sample preparation
5.5 Analytical procedure
5.6 Expression of results
6 Method 3: Butyl acetate extraction spectrophotometric method
6.1 Principle
6.2 Reagents and materials
6.3 Apparatus
6.4 Sampling and sample preparation
6.5 Analytical procedure
6.6 Expression of results
7 Method 4: Phosphovanadomolybdate spectrophotometric method
7.1 Principle
7.2 Reagents and materials
7.3 Apparatus
7.4 Sampling and sample preparation
7.5 Analytical procedure
7.6 Expression of results
8 Method 5: Ammonium phosphomolybdate titration method
8.1 Principle
8.2 Reagents and materials
8.3 Apparatus
8.4 Sampling and sample preparation
8.5 Analytical procedure
8.6 Expression of results
9 Method 6: Diantipyrylmethane phosphomolybdic acid gravimetric method
9.1 Principle
9.2 Reagents and materials
9.3 Apparatus
9.4 Sampling and sample preparation
9.5 Analytical procedure
9.6 Expression of results
10 Test report
Annex A (Informative) Components of GB/T
Annex B (Informative) Raw data of the cooperative precision test for Method
Annex C (Informative) Raw data of the cooperative precision test for Method
Annex D (Informative) Raw data of the precision test for Method
Annex E (Informative) Supplementary information on the international inter-laboratory precision test for Method
Annex F (Informative) Graphical representation of precision data for Method
Annex G (Informative) Raw data of the cooperative precision test for Method
Annex H (Informative) Raw data of the cooperative precision test for Method