This standard specifies the product classification, requirements, test method, inspection rules, marking, packaging, transportation and storage of plaited rattan products.
This standard is applicable to the plaited rattan products made of rattan or rattan knitted by fabric materials.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections), or revisions, of any of these publications do not apply to this standard. However parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 2828.1-2003 Sampling Procedures for Inspection by Attributea - Part 1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-by-lot Inspection (ISO 2859-1:1999, IDT)
GB/T 2829-2002 Sampling Procedures and Tables for Periodic Inspection by Attributes (Applicable to Inspection of Stability for Productive Process)
GB/T 2912.1-1998 Textiles - Determination of Formaldehyde - Part 1: Free and Hydrolized Formaldehyde (Water Extraction Method) (eqv ISO/FDIS 14184-1:1997)
GB/T 17592 Textiles - Determination of the Banned Azo Colourants
GB 18401 National General Safety Technical Code for Textile Products
3 Product Classification
The product is classified into rattan mat, rattan cushion, rattan pillow, etc. based on service performance.
Foreword i 1 Scope 2 Normative References 3 Product Classification 4 Requirements 5 Test Method 6 Inspection Rules 7 Marking, Packaging, Transportation and Storage
1 Scope
This standard specifies the product classification, requirements, test method, inspection rules, marking, packaging, transportation and storage of plaited rattan products.
This standard is applicable to the plaited rattan products made of rattan or rattan knitted by fabric materials.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections), or revisions, of any of these publications do not apply to this standard. However parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 2828.1-2003 Sampling Procedures for Inspection by Attributea - Part 1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-by-lot Inspection (ISO 2859-1:1999, IDT)
GB/T 2829-2002 Sampling Procedures and Tables for Periodic Inspection by Attributes (Applicable to Inspection of Stability for Productive Process)
GB/T 2912.1-1998 Textiles - Determination of Formaldehyde - Part 1: Free and Hydrolized Formaldehyde (Water Extraction Method) (eqv ISO/FDIS 14184-1:1997)
GB/T 17592 Textiles - Determination of the Banned Azo Colourants
GB 18401 National General Safety Technical Code for Textile Products
3 Product Classification
The product is classified into rattan mat, rattan cushion, rattan pillow, etc. based on service performance.
Contents of GB/T 23172-2008
Foreword i
1 Scope
2 Normative References
3 Product Classification
4 Requirements
5 Test Method
6 Inspection Rules
7 Marking, Packaging, Transportation and Storage
