1 Scope
This part of GB/T 24810 specifies the requirements for devices which limit and/or indicate the loads, motions, performance and environment of bridge and gantry cranes.
The general requirements for limiting and indicating devices for cranes are given in GB/T 24810.1.
2 Normative References
The following normative document contains provisions which, through reference in this text, constitute provisions of this part of GB/T 24810. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this part are encouraged to investigate the possibility of applying the most recent edition of the normative document indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 24810.1 Cranes — Limiting and Indicating Devices — Part 1: General (GB/T 24810.1-2009, ISO 10245-1:2008, IDT)
GB/T 22437.1-2008 Cranes — Design Principles for Loads and Load Combinations — Part 1: General (ISO 8686-1:1989, MOD)
3 Terms and Definitions
For the purposes of this document, the terms and definitions given in GB/T 24810.1 and the following apply.
4 Rated Capacity Limiter
Foreword II
1 Scope
2 Normative References
3 Terms and Definitions
4 Safety Requirements and/or Measures
5 Inspection
6 Maintenance
7 Operating Instructions and Operator Training
8 Information for Use
Bibliography
1 Scope
This part of GB/T 24810 specifies the requirements for devices which limit and/or indicate the loads, motions, performance and environment of bridge and gantry cranes.
The general requirements for limiting and indicating devices for cranes are given in GB/T 24810.1.
2 Normative References
The following normative document contains provisions which, through reference in this text, constitute provisions of this part of GB/T 24810. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this part are encouraged to investigate the possibility of applying the most recent edition of the normative document indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 24810.1 Cranes — Limiting and Indicating Devices — Part 1: General (GB/T 24810.1-2009, ISO 10245-1:2008, IDT)
GB/T 22437.1-2008 Cranes — Design Principles for Loads and Load Combinations — Part 1: General (ISO 8686-1:1989, MOD)
3 Terms and Definitions
For the purposes of this document, the terms and definitions given in GB/T 24810.1 and the following apply.
4 Rated Capacity Limiter
Contents of GB/T 24810.5-2009
Foreword II
1 Scope
2 Normative References
3 Terms and Definitions
4 Safety Requirements and/or Measures
5 Inspection
6 Maintenance
7 Operating Instructions and Operator Training
8 Information for Use
Bibliography
