1 Scope
This standard specifies the general requirements for basic principle and framework, assessment method and report of life cycle assessment for mechanical products.
This standard is applicable to the research and application of life cycle assessment for mechanical products to assess the potential environmental impact of mechanical products in their full life cycle or at a specified stage.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 24040-2008 Environmental management - Life cycle assessment - Principles and framework
GB/T 24044-2008 Environmental management - Life cycle assessment - Requirements and guidelines
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
life cycle
whole process of mechanical products from raw material acquisition to product design, production, packaging, transportation, use and recycle till final disposal
3.2
life cycle assessment (LCA)
summary and assessment for input, output and potential environmental impact of mechanical product system in the life cycle
3.3
life cycle inventory analysis (LCI)
stage of life cycle assessment summarizing and quantifying the input and output in the full life cycle of mechanical products
Foreword i
Introduction ii
1 Scope
2 Normative references
3 Terms and definitions
4 Principles and framework
5 Assessment method
6 Report
Annex A (Informative) Example for mechanical product inventory analysis
Annex B (Informative) Computing example for category indicator result
Bibliography
1 Scope
This standard specifies the general requirements for basic principle and framework, assessment method and report of life cycle assessment for mechanical products.
This standard is applicable to the research and application of life cycle assessment for mechanical products to assess the potential environmental impact of mechanical products in their full life cycle or at a specified stage.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 24040-2008 Environmental management - Life cycle assessment - Principles and framework
GB/T 24044-2008 Environmental management - Life cycle assessment - Requirements and guidelines
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
life cycle
whole process of mechanical products from raw material acquisition to product design, production, packaging, transportation, use and recycle till final disposal
3.2
life cycle assessment (LCA)
summary and assessment for input, output and potential environmental impact of mechanical product system in the life cycle
3.3
life cycle inventory analysis (LCI)
stage of life cycle assessment summarizing and quantifying the input and output in the full life cycle of mechanical products
Contents of GB/T 26119-2010
Foreword i
Introduction ii
1 Scope
2 Normative references
3 Terms and definitions
4 Principles and framework
5 Assessment method
6 Report
Annex A (Informative) Example for mechanical product inventory analysis
Annex B (Informative) Computing example for category indicator result
Bibliography