1 Scope
This standard specifies the method summary, reagents and materials, instruments and apparatus, determination, calibration, expression of results, precision etc. for determination of total carbon, hydrogen and nitrogen content in coal with instrumental method.
This standard is applicable to the rapid determination of total carbon, hydrogen and nitrogen content in lignite, bituminite and anthracite.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 212 Proximate Analysis of Coal
GB/T 218 Determination of Carbon Dioxide Content in the Mineral Carbonates Associated with Coal
GB/T 483 General Rules for Analytical and Testing Methods of Coal
3 Method Summary
The coal sample with known mass sufficiently combusts in oxygen stream at high temperature, and the mixture of carbon dioxide, water and nitrogen/nitrogen oxide is generated through complete combustion of carbon, hydrogen and nitrogen in coal. The influence factors (e.g. the combustion product of sulfur, chlorine etc.) disturbing the determination are filtered through specific handling system and all nitrogen oxide are reduced to nitrogen. The carbon, hydrogen or nitrogen content in coal is quantitatively determined according to carbon dioxide, vapor and nitrogen respectively with specific detection system.
4 Reagents and Materials
4.1 Carrier gas: helium or other suitable gas as specified in the instrument instruction.
4.2 Oxygen: as specified in the instrument instruction.
4.3 Reagents: as specified in the instrument instruction.
Foreword i
1 Scope
2 Normative References
3 Method Summary
4 Reagents and Materials
5 Instruments and Apparatus
6 Determination
7 Calibration
8 Expression of Results
9 Method Precision
10 Test Report
Annex A (Informative) Corresponding Numbering Equivalent Clauses between This Standard and ISO 29541:
Annex B (Informative) Technical Deviations between This Standard and ISO 29541:2010 and Their Justifications
Annex C (Informative) Examples of Instrument Calibration Method
1 Scope
This standard specifies the method summary, reagents and materials, instruments and apparatus, determination, calibration, expression of results, precision etc. for determination of total carbon, hydrogen and nitrogen content in coal with instrumental method.
This standard is applicable to the rapid determination of total carbon, hydrogen and nitrogen content in lignite, bituminite and anthracite.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 212 Proximate Analysis of Coal
GB/T 218 Determination of Carbon Dioxide Content in the Mineral Carbonates Associated with Coal
GB/T 483 General Rules for Analytical and Testing Methods of Coal
3 Method Summary
The coal sample with known mass sufficiently combusts in oxygen stream at high temperature, and the mixture of carbon dioxide, water and nitrogen/nitrogen oxide is generated through complete combustion of carbon, hydrogen and nitrogen in coal. The influence factors (e.g. the combustion product of sulfur, chlorine etc.) disturbing the determination are filtered through specific handling system and all nitrogen oxide are reduced to nitrogen. The carbon, hydrogen or nitrogen content in coal is quantitatively determined according to carbon dioxide, vapor and nitrogen respectively with specific detection system.
4 Reagents and Materials
4.1 Carrier gas: helium or other suitable gas as specified in the instrument instruction.
4.2 Oxygen: as specified in the instrument instruction.
4.3 Reagents: as specified in the instrument instruction.
Contents of GB/T 30733-2014
Foreword i
1 Scope
2 Normative References
3 Method Summary
4 Reagents and Materials
5 Instruments and Apparatus
6 Determination
7 Calibration
8 Expression of Results
9 Method Precision
10 Test Report
Annex A (Informative) Corresponding Numbering Equivalent Clauses between This Standard and ISO 29541:
Annex B (Informative) Technical Deviations between This Standard and ISO 29541:2010 and Their Justifications
Annex C (Informative) Examples of Instrument Calibration Method
